Engineering Commons^™

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Construction Of Tire Shreds Test Embankment, Rodrigo Salgado, Sungmin Yoon, Nayyar Zia Siddiki

JTRP Technical Reports

According to recent research, it is estimated that there are more than 500 million tires stockpiled across the United States, and 270 million more are generated each year. A significant number of tires are left in empty yards and even dumped illegally. Tires have characteristics that make them not easy to dispose, and potentially combustible. For these reasons, there is a strong need to find beneficial ways to recycle or reuse tires. Civil engineering applications constitute one of biggest markets for scrap tires. Tire shreds can be used as fill material, for example. The objective of this research is to …

Implementation Of Steel Bridge Protection Policy, Luh M. Chang, Po-Han Chen, Sangwook Lee

JTRP Technical Reports

Many Departments of Transportation (DOTs) have made tremendous efforts for managing their civil infrastructure systems effectively and to meet public demands for their performance and safety. The introduction of warranties help many DOTs keep their construction with better quality by shifting post-construction responsibilities to contractors. Warranties are applied to numerous items according to each DOT’s needs, and this research focuses on steel bridge painting protection policy for Indiana Department of Transportation (INDOT). This research represents the development of an implementable warranty clause for protecting steel bridge painting and the image processing technique for the objective and quantitative painting quality assessment. …

Bs News

Building Services Engineering

No abstract provided.

Finite Element Modelling Of Moisture Movement In Concrete Floors, Niall Holmes, Roger West

Conference papers

Predictive methods for determining the point at which it is safe to apply floor coverings to concrete floors can save time and money for the client, contractor and the floor installer. The current standard states that impervious floor coverings should not be applied until the surface of the floor reaches a relative humidity (RH) of 75%, established using a surface hygrometer test. Tests at Trinity College Dublin on drying concrete slabs in natural and forced drying environments show that there is a large variation in the residue of moisture deep in the concrete when the floor covering is applied, particularly …

Moisture Re-Distribution In Concrete Under Impermeable Coverings, Niall Holmes

Conference papers

It is normally considered safe to apply an impermeable floor covering to concrete surfaces when the surface relative humidity reaches 75% as determined by a surface hygrometer. However, over time, defects can appear on the covering such as blistering of vinyl and rising of tiles from the surface. One cause is the on-going diffusion of the residual moisture deep within the slab to the surface. The covering traps this residual moisture, thus preventing evaporation to the ambient air and gradually generates a vapour pressure underneath the covering, which can result in damage.

Here, experimental results on the long-term influence of …

Bs News

Building Services Engineering

No abstract provided.

Issues Of Seismic Response And Retrofit For Critical Substation Equipment, Seyed Ali Hashemi Nezhad Ashrafi

Theses

This study focuses on means to reduce the seismic hazard for transformer-bushing systems and different issues of the response and rehabilitation of transformers. The primary means of seismic mitigation investigated is the use of the Friction Pendulum System (FPS) bearings to seismically isolate transformers. This is done by developing a finite element model representing the behavior of FPS bearings and implementing this model on to ADINA finite element package for further use in analytical studies. This model is used to study the behavior of isolated primary-secondary systems and the effects of parameters like different FPS radii or vertical excitations. Also …

Mapping Of Ecosystems In Mount Bromo Using Remote Sensing Technology, Bangun Muljo Sukojo

Makara Journal of Technology

Mapping of Ecosystems in Mount Bromo Using Remote Sensing Technology. Covered land analyses of Landsat image have been done to get ecosystem types and map in Mount Bromo region using remote sensing technology. There are nine types of ecosystems in Mount Bromo region, i.e. primary forest, secondary forest, lake, crater, sands, uncovered land, underbrush, dry-field and residence. Distribution of rock analysis has also been done by comparing the manual image interpretation with geological map. The results were coorelated with the digital image interpretation to find rock distribution map which can be useful to get the information about water reservation potencial …

Capacity Of High-Speed Powerline Communication In Vehicles, Deny Hamdani, Ery Safrianti

Makara Journal of Technology

Powerline Communication (PLC) Systems intents to use the mains network in vehicles for high-speed data transmission. Carrier frequencies in the range of MHz are required to establish data rates of some megabits per second. In this paper, typical reference channels extracted from channel measurements are presented and computation results of their capacities according to Shannon’s theorem are presented. Furthermore, the effect of limitations of frequency range and power spectral density of transmitted signal on achievable capacity is investigated. This paper outlines an assessment for theoretical channel capacity and achievable data rates of vehicular PLC transmission schemes. Finally, EMC (Electromagnetics Compatibility) …

Diffuser Optimation At Exhaust System With Catalytic Converter For 110 Cc Mopet With Fluid Flow Cfd Simulation, Tresna P. Soemardi, Ahmad Indra Siswantara, Erwin Erwin

Makara Journal of Technology

Diffuser Optimation at Exhaust System with Catalytic Converter for 110 cc Mopet with Fluid Flow CFD Simulation. CFD simulation used to get behavior of exhaust gas through catalyst, this result will be used to optimize geometry form to perform uniform stream distribution to catalyst, and CFD Simulation will used to analyze backpressure that happened at the model.

The Study On Fluorescence Characteristics Of Chlorella Spp: Ph Influence On Culture, Retno Wigajatri P., Andrianto Handojo, Hendrik Kurniawan, N. B. Prihantini

Makara Journal of Technology

The Study on Fluorescence Characteristics of Chlorella spp: pH Influence on Culture. Experiments for measuring the fluorescence characteristics of Chlorella spp. by using high stability and high repetition rate nitrogen laser of energy 5 mJ with pulse duration of 5 ns have been carried out. The results show that for a cell concentration range from 2,625 cells/ml up to 2,769,000 cells/ml, the fluorescence intensities at pada λ = 687 nm have a linear relationship with the cell concentration. It has been also found that for a 7 days old chlorella culture, the pH variation at the starting culture influenced the …

The Performance Analysis Of A Unicast Network When Two Protocols, Sctp (Stream Control Transmission Protocol) And Tcp (Transmission Control Protocol) Coexist In The Network, Bagio Budiardjo, Michael Thiotrisno

Makara Journal of Technology

This paper elaborates the performance analysis of a unicast network when two protocols, SCTP (Stream Control Transmission Protocol) and TCP (Transmission Control Protocol) coexist in the network. These two protocols are tested using File Transfer Protocol (FTP) and Constant Bit Rate (CBR) based traffic. From the simulations, it could be concluded that SCTP could achieve better throughput compared to TCP in both FTP and CBR based traffic, with sufficiently high fairness index of both intrafairness and interfairness. The increase of simulation time yields to the increase and relatively stable network performance. The increase of the number of sessions of small …

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Investigation Of An Integrated Regional Environmental Watershed Methodology, Marshall R. Boggio

Dissertations

Recent public awareness of the environment has placed increased emphasis on the health and current state of the regional watershed. The watershed has been defined as that area in which water flowing across and beneath a given land surface drains into a specific stream or river, ultimately flowing through a single point or outlet on that stream or river. Since the processes involved are many and are analyzed in the literature on an individual basis, the current investigation attempts a more holistic approach by suggesting a methodology that integrates all elements of the hydrologic cycle. The investigation utilizes the area …

Shape Finding Of Fabric Structures Using Grid Method, Armin Bischof

Theses

Fabric structures can span large distances with a very low self-weight, which makes them very efficient for covering huge areas. They have attractive shapes and an appealing architecture. These properties make them very popular and they are used in many different kinds of buildings. Airports, stadiums and halls are typical examples where the use fabric structures is often recommendable.

Fabric structures are built mainly out of fabric and cables; two structural members that can only take tension stresses. Therefore these structural members must be prestressed in such a way that their shape can carry all loads that might affect the …

Optimization Of Very Early Strength Concrete Mixes Using Maturity Method, Sun Punurai

Theses

Fast track concrete technology has been used over the past two decades for overnight highway repairs. Originally, fast track was concerned only with rapid strength gain and workability but little concern was paid to cost and durability of the concrete.

The purpose of this research study is to develop a current improved very early strength (VES) concrete mix, which was accepted by NJDOT in 1996. More than 50 concrete mixes were evaluated for strength, shrinkage, and curing rate (maturity), eventually leading to the development of an optimized VES concrete mix with improved performance characteristics.

The study has developed the new …

The Consolidation Analysis Of A Clay Layer In The City Of Belem Do Para, Brazil, John Bezerra Jr.

Theses

In this study, an analysis was done on a particular clay layer found in the city of Belem do Para, Brazil. Various soil tests were conducted including a consolidation analysis. Data were gathered and analyzed in order to obtain a better understanding of how the soil responds under certain loading conditions. There have been no previous studies done on this material and so when it has been encountered in the field geotechnical engineers provide the safest, but not necessarily best design method possible. In the case of large buildings, piles are driven past this material to competent sand. There have …

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Study About High Influence Doping To Base Resistance And Bandgap Narrowing At Si/Si1-Xgex/Si Heterojunction Bipolar Transistor, Achmad Fadhol

Makara Journal of Technology

Study About High Influence Doping to Base Resistance and Bandgap Narrowing at Si/Si1-xGex/Si Heterojunction Bipolar Transistor. Heterojunction is a link formed bedween two semiconductor materials and differend bandgap which has thinness under 50nm and grow the mixture of plate SiGe as bases. The link is an abrupt link or graded one. In this research learnt formulation of doping concentration influence to basis resistance and bandgap narrowing through Si/Si1-xGex/Si Heterojunction Bipolar Transistor with abrupt emitter-basis link, besides taking care to mobility and basis wide to basis resistance, it is also influence of mole fraction to bandgap power. From the result shows …

Photocatalytic Treatment Of Heavy Metal Waste Cr(Vi) Withtio2 Photocatalyst, Slamet Slamet, Riyadi Syakur, Wahyu Danumulyo

Makara Journal of Technology

Photocatalytic Treatment of Heavy Metal Waste Cr(VI) with TiO2 Photocatalyst. The photocatalytic reduction of hexavalent chromium/Cr(VI) using TiO2 and copper-doped TiO2 as photocatalysts have been studied in stirred tank and circulating photoreactors. All photocatalysts were characterized with FTIR (Fourier Transform Infra Red), BET (Brunauer-Emmett-Teller), XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope). TiO2 Merck and Degussa P-25 are the commercial photocatalysts used to compare the photocatalytic activity of all the prepared catalysts. Blank test experiments as well as the effect of dopants, EDTA (ethylenediaminetetraacetic acid) and activated carbon addition were studied. Cr(VI) reduction on various pH and initial Cr(VI) concentration …

Development And Analysis Of Geographic Information System For Electricity Network (Case Study: Surabaya Industrial Estate Rungkut In Surabaya)., Lilik Jamilatul Awalin, Bangun Muljo Sukojo

Makara Journal of Technology

Development and Analysis of Geographic Information System for Electricity Network (Case Study: Surabaya Industrial Estate Rungkut in Surabaya). Geographic Information System (GIS) is a system of data which has spatial base. This may be cause has ability to process and analysis data quickly. The ability of GIS will be able to process the alternative in decision making. The need of electric power grows until recent time along with the existence of industrial sector expansion and land use expansion claim better service, large and balance stock of electric power. GIS is a solution for planning and managing data base system, for …

Application Of Remote Sensing And Geographic Information System Methods For Land Using Difference, Bangun Muljo Sukojo, Diah Susilowati

Makara Journal of Technology

Application of Remote Sensing and Geographic Information System Methods for Land Using Difference. Land using difference analysis has been done using remote sensing and Geographic Information System (GIS) methods. Identification of land using difference was conducted using map overlaying process of 1990s (digitized scalling 1:50.000) and 1997s land using map (interpreted from Landsat TM (Thematic Mapper) Image 1997) with UTM (Universal Transverse Mercator) coordinate. Image enhancement was done through histogram equalization with supervised classification devided into 7 classes: rice field, settlement, dry field, industry, pond, sport field and bush. Land using difference and river pollution BOD (Biological Oxygen Demand), COD …

Phase Composition Analysis Using Rietveld Methode And It's Influence To The Hardness Of Ti-Si-N Nanocomposites, Keba Moto, Lia Setiarini, Zufar Abubakar

Makara Journal of Technology

Phase composition analysis using rietveld methode and it’s influence to the hardness of Ti-Si-N nanocomposites. XRD data of nanocomposites Ti-Si-N have been analysed using GSAS based on Rietveld Method in order to identify phases and their composition as well as its influence on the hardness of these nanocomposites. Several new phases have been found in the sample beside the nc-TiN/a-Si3N4& a-/nc-TiSi2 that have been known widely. From the obtained crystalline phase, after the calculation of amorf Si3N4 and TiSi2 phase fraction, it is found that the optimum hardness can be reached when the fraction of a-Si3N4 phase around 8 wt.%

Influence Of Strain Rate And Temperature Of Hot Tension Testing On Mechanical Properties Of Medium Carbon Steel S48c, Dedi Priadi, Iwan Setyadi, Eddy S. Siradj

Makara Journal of Technology

Influence of Strain Rate and Temperature of Hot Tension Testing on Mechanical Properties of Medium Carbon Steel S48C. The characterization of S48C by hot tension testing was done to understanding the influence of temperature and strain rate for S48C flow stress, that close relationship with its forge ability. The hot tension testing was performed on temperatures and strain rates variation (T 850, 900, 950 0C and έ 0,01;1 s-1). The result of hot tension testing showed that increasing temperature decreases ultimate tensile strength (UTS) and flow stress of S48C. The higher decreasing of UTS is on 950 0C about 85% …

Use Of Eps-Filled Tires As Lightweight Construction Material, Sethapong Sethabouppha

Civil & Environmental Engineering Theses & Dissertations

The purpose of this research is to study the possibility of recycling discarded automobile tires as a lightweight construction material by injecting expanded polystyrene (EPS) into the hollow space of the tires. The observation from compression tests on used tires revealed that the tread wall of these tires bent toward their own center. This inward deformation should provide confining stress to the contained EPS, and thus the compressive strength of EPS-tire composite was expected to be higher than that of EPS.

To produce EPS-filled tire prototypes for this study, EPS type II, with density of 24 kg/m3, was injected into …

Utilisation Of Bagasse Fly Ash And Carbon Waste From Fertiliser Plant For Treatment Of Pyridine And 3-Picoline Bearing Wastewater, Indra Deo Mall, Sanjay Tewari, Nripendra Singh, Indra Mani Mishra

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The present work explores the possibility of utilizing sugarcane bagasse fly ash and carbon waste obtained from sugar mills and nitrogenous fertilizer plants, respectively for the removal of pyridine and 3-picoline from waste water. The adsorbing capacity of both adsorbents has been compared with that of activated carbon. Batch studies were conducted to see the effect of contact time, adsorbent dose, initial concentration and pH on the removal of pyridine and 3-picoline. Equilibrium data were fitted with Langmuir and Freundlich isotherms. Adsorptive capacities were found to be in the order: activated carbon > carbon waste > bagasse fly ash. Adsorption was found …