Engineering Commons^™

An Investigation Of Concrete Properties In Support Of International Testing Standards, Justine Barnes

Symposium on Research and Creative Expression (SORCE)

Fresh and hardened concrete testing is an important aspect in evaluating the quality of ready mixed concrete. The testing process requires many standards to ensure repeatable results. The research being conducted examines two particular standards ASTM C143-The Slump of Hydraulic Concrete and ASTM 496-Split Tension Testing of Hardened Concrete. The first test compares the slump on a flat and level surface with the slump when tested on a surface which slopes up to 8%. For each batch of concrete created, 30 slump tests are conducted and three 4x8 cylinders were created for compression testing. The second test examines whether the …

Constitutive Model For Rate Dependent Behavior Of Clay Internal Geotechnical Report 2011-3, Harry Martindale, Dipanjan Basu

Technical Reports

This report presents a strain-rate dependent plastic constitutive model for clays. Based on the concepts of critical-state soil mechanics and bounding surface plasticity theory, the model reproduces the mechanical response of clays under multi-axial loading conditions and predicts both the drained and undrained behavior. The model parameters are determined for Boston Blue Clay, London Clay and Kaolin Clay, and the performance of the model in simulating the mechanical response of these clays is demonstrated for low to medium strain rates. The sensitivity of each model parameter is checked by perturbing the calibrated values by ±20%. Subsequently, a probabilistic analysis using …

A High Strain-Rate Constitutive Model For Sand With Application In Finite Element Analysis Internal Geotechnical Report 2011-4, William Higgins, Dipanjan Basu

Technical Reports

The report presents a constitutive model for simulating the high strain-rate behavior of sands. Based on the concepts of critical-state soil mechanics, the bounding surface plasticity theory and the overstress theory of viscoplasticity, the constitutive model simulates the high strain-rate behavior of sands under uniaxial, triaxial and multiaxial loading conditions. The model parameters are determined for Ottawa and Fontainebleau sands, and the performance of the model under extreme transient loading conditions is demonstrated through simulations of split Hopkinson pressure bar tests up to a strain rate of 2000/sec. The constitutive model is implemented in a finite element analysis software to …

Laboratory Evaluation Of Dynamic Characterization Methods For Rapid Condition Assessment Of Bridges, Jason Kyle Herrman

Graduate Theses and Dissertations

The objective of this thesis was to devise and refine Structural Health Monitoring methods and the associated quantitative characterization methods with the specific goal of enabling rapid and reliable safety evaluations of bridges following natural or manmade hazards. Presently, the safety and serviceability of these transportation infrastructure assets for use in emergency response and recovery operations are evaluated through on-site visual inspections of individual structures by teams of specially trained engineers or technicians; a process that is manpower-intensive, subjective, and slow. Specifically, the researcher was able to identify and evaluate strategies and procedures for using dynamic testing methods to rapidly …

Evaluation Of Safe Routes To School Programs: Qualitative And Quantitative Analysis Of Parental Decision-Making, Lynn Weigand, Noreen Mcdonald

TREC Final Reports

In the United States, walking to school declined from 42% of 5-18 year olds in 1969 to 16% in 20011. The US Department of Transportation has responded to this dramatic decrease by funding the Safe Routes to School program for $612 million in SAFETEA-LU. The program’s funding emphasize infrastructure improvements such as completing sidewalks and adding crosswalks by requiring between 70% and 90% of funding be allocated toward infrastructure. However, recent research shows that 2 of 3 children who currently are driven to school, but live close enough to walk, do so because it is more convenient for parents. Currently, …

A Three-Dimensional Hydro-Environmental Model Of Dublin Bay, Zeinab Bedri, Michael Buen, Aodh Dowley

Articles

This paper compares a 3-dimensional hydro-ecological model with a 2-dimensional model simulating the distribution and fate of Escherichia Coli (E.Coli) discharges from a sewage treatment plant discharging into Dublin Bay, Ireland. Before being discharged, the effluent from the sewage treatment plant is mixed with cooling water from a thermal generation plant resulting in a warm buoyant sewage plume that can be 7 − 9oC higher than the ambient water in the Bay. The mixing of the stratified plume is complicated by the tidal currents which transport the plume into and out of the estuary. These processes have a direct impact …

Structural Health Monitoring Of Historic Masonry Monuments, Saurabh Prabhu

All Theses

Structural Health Monitoring (SHM) is a well-accepted diagnostic technique being used to evaluate modern structures. This method involves monitoring the vibration response of a structure to detect changes in its structural state. The primary intention of this thesis is to address two practical and technical difficulties encountered in deploying SHM on historic masonry monuments: (i) the selection of suitable low dimensional vibration response features that are highly sensitive to the presence and extent of damage, while having low sensitivity to extraneous noise and (ii) the selection of optimal sensor locations for efficient system identification applied to Gothic Cathedrals. Both of …

Retrofit Solutions For Sealed Pervious Concrete Pavements, Gregory Bunting

All Theses

The goal of this research was to design, implement, and evaluate several retrofit solutions for sealed pervious concrete. Properly functioning pervious concrete pavements allow water to drain through the structure, eliminating the need for traditional drainage infrastructure. A recent study of South Carolina porous pavements (Putman 2010) revealed that some pervious concrete pavements are not properly draining, either because of sealing at the surface. Sealed pavements are generally a result of construction processes, and sealed pavements cannot be fixed with sediment removal techniques such as vacuuming and pressure washing. This study investigates a technique to increase infiltration of sealed pervious …

Comparison Of Design-Build And Design-Bid-Build Performance Of Public University Projects, James David Fernane

UNLV Theses, Dissertations, Professional Papers, and Capstones

With an unsure market and scarce work, owners across the United States, especially universities, are finding themselves in situations where they are unable to complete their projects within cost and schedule using the traditional delivery method: Design-Bid-Build (DBB). Under the DBB project delivery method, many competent contractors are electing to send low bids on projects just to keep work on their books, with plans to receive change orders once the project is underway; this practice is leading to cost and schedule overruns. Public universities across the United States are beginning to elect to use Design-Build (DB) as an alternate project …

Sensitivity Analysis Of Load Distribution In Light-Framed Wood Roof System Due To Typical Modeling Parameters, Ranjith Shivarudrappa

All Theses

Since failure of roof systems in past high wind events have demonstrated the consequences of not maintaining a continuous load path from the roof to the foundation, many studies have been conducted to better understand this load path, including how loads are distributed in the system. The present study looks to add to the current knowledge of the vertical load path by focusing on uplift loads and by considering the sensitivity of different modeling parameters. This is done by developing and assessing load influence coefficients for various roof-to-wall (RTW) connections. An analytical model of a light-framed wood structure using finite …

Evaluation Of Warm Mix Open Graded Friction Course Mixtures, James Wurst

All Theses

The goal of this study was to evaluate EvothermTM (a chemical package) and foaming (a water-injection method) warm mix asphalt (WMA) technologies to determine their effectiveness in producing high quality open graded friction course (OGFC) mixes. Specifically, this study focused on the effect of the removal of stabilizing additives (fibers and polymers) on the optimum binder content and performance of WMA OGFC mixtures. By focusing on additive removal, this study attempted to evaluate practical production concerns and the possible benefits of WMA technologies combined with OGFC.
The EvothermTM WMA and foaming WMA mixes were compared to traditional HMA OGFC by …

Behavior Of The Next-D Beam Shear Key: A Finite Element Approach, Armando Flores

All Theses

State Departments of Transportation have been using adjacent precast bridges for many years. A vital component of this type of bridges is the connection between the members, which is typically done with a grouted shear key. Shear keys have changed through time to adapt to the requirements of bridge design. An assessment of the Northeast Extreme Tee with integral deck (NEXT-D) was performed for the SCDOT as a development possibility for short span bridges. This research focuses on the finite element analysis study of the NEXT-D's specific shear key configuration.
A review of shear key configurations used by different DOTs …

An Experimental And Computational Study Of Windborne Debris In Severe Storms, Arash Karimpour

All Dissertations

Abstract
This research focuses on an experimental and theoretical investigation of windborne debris emanating from loose gravel on built-up roofs. During severe storms, windborne debris can cause considerable physical harm and property damage. One of the major sources of flying debris in large commercial areas is loose gravel on built-up roofs. Such loose gravel can be responsible loss of life and significant property damage. Despite the high risk of windborne debris, their flight mechanics are poorly understood. To better understand windborne debris flight, a series of experiments were conducted in the Clemson University Boundary Layer Wind Tunnel. These experiments were …

Social Sustainability Considerations During Planning And Design: A Framework Of Processes For Construction Projects, Rodolfo Valdes Vasquez

All Dissertations

With increased awareness of issues such as global resource shortages and climate change, sustainability efforts are becoming more common in the construction industry. While these efforts often consider economic and environmental factors, a truly sustainable construction project also needs to include such social considerations as its impact on the surrounding community and the safety, health, and education of the workforce. For the construction industry, social sustainability requires integrating processes for improving safety, health and well-being over the project life cycle. However, an empirical and comprehensive framework defining these social sustainability processes in construction projects has yet to be clearly delineated. …

Investigation Into The Role Of Airfield Pavement Deicer In Concrete Pavement Deterioration, David Wingard

All Dissertations

Premature deterioration of concrete due to materials-related distresses has been observed with increased frequency in airfield pavements across the United States in the past two decades. The use of a new breed of deicing chemicals based on alkali-acetates and alkali-formates, starting in the early 1990s, has been suspected to be one of the significant reasons for the increase in the observed deterioration. Previous laboratory-based studies have found that the early-age deterioration in concrete is associated with exposure to deicers causing acceleration of the Alkali Silica Reaction (ASR) deterioration mechanism and consequent failure. However, no systematic forensic studies on the impact …

Performance Rating Of De-Icing Chemicals For Winter Operations, Barbara M. Gerbino-Bevins

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The cost of deicing chemicals is a significant part of the Nebraska Department of Road's winter maintenance budget. Many products are available for use in highway and bridge deicing and new products are introduced each year. The objectives of this research are to develop a laboratory test to evaluate the performance of chemical deicers, to investigate national, state, and local standards, and to develop best maintenance practices to optimize the use of chemical deicers.

This research project consists of two phases:

Phase 1: conduct a literature survey to find data from existing laboratory tests used to evaluate deicer performance.

Phase …

Application Of Shredded-Tire Biofilter And Membrane Bioreactor For Greywater Reclamation, Meng Hu

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Water scarcity is a pressing global issue. Greywater (GW) reclamation is a viable option to reduce freshwater demand. The objectives of this work were to: a) evaluate the feasibility of the combination of shredded tire biofilter (STB) technology and membrane bioreactor (MBR) technology in GW reclamation; b) study the effects of various parameters on STB performance; and c) understand the fouling mechanisms to lower the energy consumption in MBRs. Bench-scale STBs and MBRs (flat-sheet membranes) were constructed to address the first two objectives, while an independent membrane (hollow-fiber membranes) fouling experiment was designed for the third objective.

It was found …

The Effects Of Fundamental Mixture Parameters On Hot-Mix Asphalt Performance Properties, Wenbin Zhao

All Dissertations

Asphalt pavements are composed of three components: aggregate, asphalt binder, and air. In the process of plant production and on-site construction, the construction quality can vary in the three component and the variability can further affect a pavement's future performance.. This research identifies aggregate gradation, binder content, and air voids content as the fundamental parameters. Understanding the fundamental parameters' influence on the HMA mixture's performance properties can provide valuable information on how to improve the current quality insurance practice. The objective of this study is to conduct well-controlled experiments to investigate how mix gradation, air voids and small range binder …

Assessing The Surface Energy Balance Components In The Snake River Basin, W Thilini Ajanthik Jaksa

Boise State University Theses and Dissertations

This study investigated the interaction of land-surface processes and vegetation in both natural ecosystems and irrigated agricultural lands in a semiarid region using the Noah land surface model (LSM) in combination with the Weather Research and Forecasting (WRF) Model. This study was conducted in the semiarid Snake River plains of south central Idaho comprising of both natural vegetation and agricultural lands. This area is characterized by warm, dry summers with irrigation being the main moisture source during the growing season. In order to properly represent the conditions of agricultural lands and also to investigate the effects of irrigation on land-surface …

Applied And Mechanistic Studies Of Microbial 17beta-Estradiol Degradation, Zhongtian Li

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The presence of natural estrogens, a class of endocrine disrupting compounds, in water has caused increasing concerns over their adverse impacts on the health of aquatic eco-systems and human beings. In this study, adsorption characteristics of two natural estrogens, 17β-estradiol (E2) and estrone (E1), on granular activated carbon (GAC) were investigated in isotherm tests and in a GAC column. The GAC column was then converted to a biologically active carbon (BAC) column and the removal efficiency of E2 and its primary biodegradation intermediate E1 were monitored. During BAC operation, the impacts of various reactor operation parameters, such as the carbon …

Roadside Grading Guidance, Kevin D. Schrum

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Provisions for the design of roadside foreslopes are not readily available, and as a result, engineering judgment is often employed. Unfortunately, this can lead to inconsistent designs, where, inevitably, some designs will be too costly and other designs will be too dangerous. Therefore, a design guide was created to lend consistency to the design of these foreslopes while maintaining the most economical and safe design.

This design guide was prepared after conducting a benefit-cost analysis using the Roadside Safety Analysis Program (RSAP). A large test matrix was developed in an attempt to simulate the most possible scenarios, leaving interpolation to …

Relating Climatic Attributes And Water Resources Allocation: A Study Using Surface Water Supply And Soil Moisture Indices In The Snake River Basin, Idaho, David J. Hoekema, Venkataramana Sridhar

Civil Engineering Faculty Publications and Presentations

Climate change forced by anthropogenic activities has been ongoing since at least the beginning of the industrial revolution. Part of the recent warming in the western United States has been attributed to anthropogenic climate change. This research seeks to answer the basic question of how declining streamflow, increasing temperatures, and fluctuation in precipitation have impacted water resource allocation in the Snake River Plain over the past 35 years (1971-2005). Understanding how changes in climatic attributes have historically impacted water allocation should help water managers better understand how projected climate change may influence allocation. Annual and monthly diversion trends from 62 …

Theoretical And Numerical Research On Sediment Transport In Pressurized Flow Conditions, Zhaoding Xie

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Research of river bed erosion is an important part of designing bridges and transportation networks since the stability and hydrodynamic response of bridges critically depends on river bed scour. The engineering designers traditionally focus on the local scour around hydraulic structures, such as piers and abutments, in open channel flow. The pressurized scour under a submerged bridge deck is seldom researched.

In this study, the commercial CFD codes, FLOW3D and STARCCM+, are adopted to simulate pressure scour under a bridge deck with six girders. Several limitations for FLOW3D are found during its application of sediment transport model: a) the scour …

Fourier Finite Element Analysis Of Laterally Loaded Piles In Elastic Media Internal Geotechnical Report 2011-1, William Higgins, Dipanjan Basu

Technical Reports

Laterally loaded piles are analyzed using the Fourier finite element method. Pile response was observed to be a function of the relative stiffness of pile and soil and of the pile slenderness ratio. The analysis is mostly performed for piles embedded in elastic soil with constant and linearly varying modulus although the pile response in two-layer soil profiles is also investigated. Equations describing pile head deflection, rotation and maximum bending moment are proposed for flexible long piles and stubby rigid piles. The design equations were developed after plotting the pile responses as functions of pile-soil stiffness ratio and pile slenderness …

Sustainability In Geotechnical Engineering Internal Geotechnical Report 2011-2, Aditi Misra, Dipanjan Basu

Technical Reports

The built environment serves as a dynamic interface through which the human society and the ecosystem interact and influence each other. Understanding this interdependence is key to understanding sustainability as it applies to civil engineering. There is a growing consensus that delivering a sustainable built environment starts with incorporating sustainability thoughts at the planning and design stages of a project. Geotechnical engineering is the most resource intensive of all the civil engineering disciplines and can significantly influence the sustainability of infrastructure development because of its early position in the construction process. In this report, a review is made of the …

Climate Change Impacts: An Assessment For Water Resources Planning And Management In The Pacific Northwest Of The U.S, Venkataramana Sridhar, Xin Jin

Civil Engineering Faculty Publications and Presentations

Assessing the hydrological impacts of climate change in the Pacific Northwest (PNW) region of the United States is important. Many global circulation models (GCMs) have a wide range of temperature and precipitation predictions for the PNW region (Bureau of Reclamation, 2011). Numerous studies have reported that decreasing snow pack, increasing temperatures and decreasing streamflow for many basins. For instance, Mote (2003) indicates that annual average temperatures in the Northwest rose faster than the global average during the 20th century. This warming occurred mostly during the winter and spring. The predominance of winter and spring warming, especially in regard to extreme …

Electromagnetic Waves In Contaminated Soils, Arvin Farid, Akram N. Alshawabkeh, Carey M. Rappaport

Civil Engineering Faculty Publications and Presentations

Soil is a complex, potentially heterogeneous, lossy, and dispersive medium. Modeling the propagation and scattering of electromagnetic (EM) waves in soil is, hence, more challenging than in air or in other less complex media. This chapter will explain fundamentals of the numerical modeling of EM wave propagation and scattering in soil through solving Maxwell’s equations using a finite difference time domain (FDTD) method. The chapter will explain how: (i) the lossy and dispersive soil medium (in both dry and fully water-saturated conditions), (ii) a fourth phase (anomaly), (iii) two different types of transmitting antennae (a monopole and a dipole), and …

Design, Behavior, And Performance Of Precast Concrete Bridge Barriers, Walid Rajab Alaywan

Doctoral Dissertations

The guidelines proposed by the NCHRP Report 350 pertaining to the safety of roadway hardware devices necessitated the evaluation of those devices. This study deals with the strength evaluation of precast concrete bridge railing.

A literature review was performed before the start of the study. Though many articles, reports, and publications were found regarding the testing of cast-in-place concrete barriers, such similar publications pertaining to precast concrete bridge railing were almost non-existent.

The theoretical work was performed using the yield line theory to predict the strength of the precast barrier. Though the theory was developed for cast-in-place barriers where the …

A Deterministic Method Of Predicting Long-Term Pile Capacity In Cohesive Soils After The Dissipation Of Excess Pore Water Pressure, Eric J. Steward

Doctoral Dissertations

Pile setup or freeze is a phenomenon where the bearing capacity of a pile increases over time both during and after the dissipation of pore pressure and the stabilization of lateral earth pressure. Driven piles gain capacity after installation because of the dissipation of excess pore pressure and soil aging. Incorporating accurate setup prediction into the design of the piles can significantly reduce the cost of many projects by reducing the size or number of required piles. Various simple, empirical mathematical models have been developed to predict pile setup. However, these models are often unreliable, resulting in very conservative designs. …

Predicting Deterioration Rate Of Culvert Structures Utilizing A Markov Model, Chenguang Yang

Doctoral Dissertations

A culvert is typically a hydraulic passage, normally placed perpendicular to the road alignment, which connects the upstream and downstream sections underneath an embankment, while also providing structural support for earth and traffic loads. The structural condition of culverts continues to deteriorate due to aging, limited maintenance budgets, and increased traffic loads. Maintaining the performance of culverts at acceptable levels is a priority for the U.S. Department of Transportation (DOT), and an effective maintenance of culvert structures can be greatly improved by introducing asset management practices. A priority list generated by traditional condition assessment might not provide optimum solutions, and …