Engineering Commons^™

Augmented Finite Control Set Mpc Design Technique For Wide Speed Range Control Of Permanent Magnet Synchronous Motor Drives, Francis Mwasilu

Tanzania Journal of Engineering and Technology (TJET)

The effective motion control task is highly influencing the final drive performance in wide-range motor drives applications such as electric vehicles (EVs), washing machines, compressors, elevators and lathe machines. Recently, permanent magnet synchronous motor (PMSM) drive has been widely employed in these applications to achieve desired performances such as high efficiency, high torque requirements with minimum size “occupancy”. The PMSM drive features combining with these modern drive applications are highly nonlinear and the desired operation requirements demand high-performance control schemes with fast system response and robustness features. Linear control schemes are usually implemented to drive the PMSM that entail trade …

Cost Estimation Proxy Models For Economic Evaluations In Petroleum Projects: A Case Study From The Onshore Gas Field In The Southern Coastal Tanzania Basin, Fulmence Kaborogo

Tanzania Journal of Engineering and Technology (TJET)

Petroleum economic evaluation involves estimating revenues from forecasted production profiles and field costs including capital expenditures (CAPEX), drilling expenses (DRILLEX), and operating expenses (OPEX). The existing cost-estimating tool requires several inputs making it time-intensive and difficult to use with few data during the early stages of projects. Majority of the previously developed time saving cost estimations proxy models rely on unrealistic assumptions that include uniform operational costs for different fields with a different number of wells, casings, and drilled depths. This work focused at developing proxy models that consider the variability of the development costs with different parameters. The developed …

Steminism: Analyzing Factors That Improve Retention Of Women In Stem, Kira Carter, Jane Kelley, Jason Vasser-Elong, Rc Patterson

Dissertations

Our co-authored research ‘Steminism: Analyzing Factors That Improve Retention for Women as STEM Majors’ analyzed factors that contributed to the retention of women in science, technology, engineering, and mathematics (STEM) programs at Missouri University of Science & Technology (Missouri S&T). Women make up half of the US population, and while careers in (STEM) are an integral part of the US economy, women are underrepresented in these career fields. The purpose of our dissertation is to address the underrepresentation of women in STEM majors. Our methodology included homogeneous sampling to collect qualitative data. More specifically, we consulted with academic advisors and …

Fabricating A 3d Floating Porous Pdms − Ag/Agbr Decorated G-C3n4 Nanocomposite Sponge As A Re-Usable Visible Light Photocatalyst, Maryam Galal Elmahgary, Mohamed Taha, A Kalid, Shymaa Madany, Yasser Attia

Chemical Engineering

No abstract provided.

Design And Development Of Deep Eutectic Solvent Assisted Pressurized Liquid Extraction Of Nutraceuticals, Harish Babu B

Theses and Dissertations

Over recent decades, the usage of nutraceuticals has been exponentially increasing as alternates to pharmaceutical drugs. However, extraction of these therapeutically significant compounds from their corresponding sources requires the use of volatile organic solvents like hexane, ethanol and chloroform which increases the global warming potential. This problem has been overcome in recent decades by the use of supercritical carbon dioxide (SCO2) as the extraction solvent. Since SCO2 is non-polar in nature, the extraction of polar compounds with better efficiency is questionable.

On the other hand, modernization in solvent engineering has created generations of green solvents like ionic liquids (ILs), deep …

A Review Of Proton Exchange Membrane Degradation Pathways, Mechanisms, And Mitigation Strategies In A Fuel Cell, Dharmjeet Madhav, Junru Wang, Rajesh Keloth, Jorben Mus, Frank Buysschaert, Veerle Vandeginste

Department of Chemical and Biomolecular Engineering: Faculty Publications

Proton exchange membrane fuel cells (PEMFCs) have the potential to tackle major challenges associated with fossil fuel-sourced energy consumption. Nafion, a perfluorosulfonic acid (PFSA) membrane that has high proton conductivity and good chemical stability, is a standard proton exchange membrane (PEM) used in PEMFCs. However, PEM degradation is one of the significant issues in the long-term operation of PEMFCs. Membrane degradation can lead to a decrease in the performance and the lifespan of PEMFCs. The membrane can degrade through chemical, mechanical, and thermal pathways. This paper reviews the different causes of all three routes of PFSA degradation, underlying mechanisms, their …

Development Of Inorganically Cross-Linked Sulfonated Polyacrylamide Preformed Particle Gels For Conformance Control: Impact Of Anionic Groups, Reem Elaf, Ahmed Hamza, Hassan Nimir, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Modern oil and gas extraction faces challenges, notably from the surplus of produced water, hampering hydrocarbon recovery and raising environmental and economic concerns. A promising solution is the injection of preformed particle gels (PPGs) into the reservoir's fractures and high permeability zones, facilitating production processes. This study introduces a novel class of inorganically cross-linked PPGs with exceptionally high swelling capacities, comprising sulfonated polyacrylamide cross-linked with aluminum attached to acetate, nitrate, sulfate, and lactate anions individually. These PPGs function as superabsorbents, capable of absorbing water at a ratio of 100-700 times their dry weight while maintaining adequate gel strength up to …

Application Of Foam Assisted Water-Alternating-Gas Flooding And Quantification Of Resistivity And Water Saturation By Experiment And Simulation To Determine Foam Propagation In Sandstone, Javed A. Khan, Jong Kim, Sonny Irawan, Karina A. Permatasar, Patrick G. Verdin, Baoping Cai, Nurudeen Yekeen

Research outputs 2022 to 2026

Foam flooding by Foam Assisted Water-Alternating-Gas (FAWAG) is an important enhanced oil recovery method that has proven successful in experimental and pilot studies. The present study is carried out to monitor the movement of the foam front once injected into the porous medium. This study aims to investigate applications of resistivity waves to monitor foam propagation in a sandstone formation. In the present lab-scale experiments and simulations, resistivity measurements were carried out to monitor the progression of foam in a sand pack, and the relationships between foam injection time and resistivity, as well as brine saturation, were studied. The brine …

Permeability Enhancement And Coal Fines Removal Through Oxidation Treatment In Coalbed Methane Reservoirs, Yu Lu, Yili Kang, Chengzhong Bu, Ying Li, Chong Lin, Zhenjiang You

Research outputs 2022 to 2026

This study utilized anthracite coal samples from Zhijin Block and applied NaClO as the oxidant to investigate the effects of oxidation treatment on permeability enhancement and coal fines migration. Subsequent to oxidation treatment, the coal samples demonstrated an average increase of 42.17% in the equivalent hydraulic aperture (EHA). This treatment also resulted in the expansion of fluid flow channels, contributing to an average permeability enhancement of 108.85% in the coal samples. Resulting from the non-uniform dissolution of the oxidant on the fracture surface of coal, self-propping fractures were formed, effectively maintaining the conductivity of fractures. The oxidation treatment converted the …

Physio-Chemical Modifications To Re-Engineer Small Extracellular Vesicles For Targeted Anticancer Therapeutics Delivery And Imaging, Rahmat Asfiya, Lei Xu, Anjugam Paramanantham, Kuanysh Kabytaev, Anna Chernatynskaya, Grace Mccully, Hu Yang, Akhil Srivastava

Chemical and Biochemical Engineering Faculty Research & Creative Works

Cancer theranostics developed through nanoengineering applications are essential for targeted oncologic interventions in the new era of personalized and precision medicine. Recently, small extracellular vesicles (sEVs) have emerged as an attractive nanoengineering platform for tumor-directed anticancer therapeutic delivery and imaging of malignant tumors. These natural nanoparticles have multiple advantages over synthetic nanoparticle-based delivery systems, such as intrinsic targeting ability, less immunogenicity, and a prolonged circulation time. Since the inception of sEVs as a viable replacement for liposomes (synthetic nanoparticles) as a drug delivery vehicle, many studies have attempted to further the therapeutic efficacy of sEVs. This article discusses engineering strategies …

Rab7 Deficiency Impairs Pulmonary Artery Endothelial Function And Promotes Pulmonary Hypertension, Bryce Piper, Srimathi Bogamuwa, Tanvir Hossain, Daniela Farkas, Lorena Rosas, Adam C. Green, Geoffrey Newcomb, Nuo Sun, Jose A. Ovando-Ricardez, Jeffrey C. Horowitz, Aneel R. Bhagwani, Hu Yang, Tatiana V. Kudryashova, Mauricio Rojas

Chemical and Biochemical Engineering Faculty Research & Creative Works

Pulmonary arterial hypertension (PAH) is a devastating and progressive disease with limited treatment options. Endothelial dysfunction plays a central role in the development and progression of PAH, yet the underlying mechanisms are incompletely understood. The endosome-lysosome system is important to maintain cellular health, and the small GTPase RAB7 regulates many functions of this system. Here, we explored the role of RAB7 in endothelial cell (EC) function and lung vascular homeostasis. We found reduced expression of RAB7 in ECs from patients with PAH. Endothelial haploinsufficiency of RAB7 caused spontaneous pulmonary hypertension (PH) in mice. Silencing of RAB7 in ECs induced broad …

Experimental Thermal Conductivity Studies Of Agar-Based Aqueous Suspensions With Lignin Magnetic Nanocomposites, Bishal Gautam, Saja M. Nabat Al-Ajrash, Mohammad Jahid Hasan, Abhishek Saini, Sarah J. Watzman, Esteban Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

Nanoparticle additives increase the thermal conductivity of conventional heat transfer fluids at low concentrations, which leads to improved heat transfer fluids and processes. This study investigates lignin-coated magnetic nanocomposites (lignin@Fe₃O₄) as a novel bio-based magnetic nanoparticle additive to enhance the thermal conductivity of aqueous-based fluids. Kraft lignin was used to encapsulate the Fe₃O₄ nanoparticles to prevent agglomeration and oxidation of the magnetic nanoparticles. Lignin@Fe₃O₄ nanoparticles were prepared using a pH-driven co-precipitation method with a 3:1 lignin to magnetite ratio and characterized by X-ray diffraction, FT-IR, thermogravimetric analysis, and transmission electron …

Radiation-Induced Polymerization Of Thermo-Responsive Polymers And Comprehensive Characterization For Improved Performance, Attia Attia, Islam Mohamed Eng., Mohamed El-Deab Prof., Nabila Maziad Prof.

Petroleum Engineering and Gas

Early water breakthrough with high water cut through highly conductive thief zones is a prevalent problem in many water-flooded oil reservoirs. Smart polymers that are sensitive to temperature changes, also known as thermo-responsive polymers, e.g., polyethylene glycol (PEG) have great advantages over conventional polymers that can be exploited to solve the problem of conductive thief zones. Thus, this study aims at designing and synthesizing a thermo-responsive polymer using Gamma Ray Induced radiation with good tolerance against high temperature, and high salinity reservoir conditions with feasible and economic synthesis procedure for application in Egyptian oil reservoirs. That is a combined use …

Experimental Determination Of The Electrochemical Properties Of Bismuth Chloride In Eutectic Licl-Kcl And Licl-Kcl-Cacl2 Molten Salts, Greg Chipman, Bryant Johnson, Cameron Vann, Lance Whitesides, Devin Rappleye

Faculty Publications

Bismuth has been investigated as a potential liquid electrode for molten salt electrorefining, but the electrochemical behavior of Bi³⁺/Bi redox couple has received scant attention in eutectic LiCl-KCl melts and no studies were found in the ternary LiCl-KCl-CaCl₂ melts. LiCl-KCl-CaCl₂ melts offer some advantages over eutectic LiCl-KCl, such as a lower melting point. Cyclic voltammetry, square wave voltammetry, chronoamperometry, chronopotentiometry and open-circuit chronopotentiometry were used to measure electrochemical parameters, such as diffusivity and standard apparent potential of bismuth electrodeposition, in LiCl-KCl and LiCl-KCl-CaCl₂ eutectics. The mean diffusivity values of 6.71 x 10^-6 cm^{2 …}

Integrated Petrophysical Evaluation And Rock Physics Modeling Of Broom Creek Deep Saline Aquifer For Geological Co2 Storage, Prasad Pothana, Ghoulem Ifrene, Kegang Ling

Petroleum Engineering Student Publications

Fossil fuels, such as coal and hydrocarbons, are major drivers of global warming and are primarily responsible for worldwide greenhouse gas emissions, including carbon dioxide CO₂. The storage of CO₂ in deep saline reservoirs is acknowledged as one of the top practical and promising methods to reduce CO₂ emissions and meet climate goals. The North Dakota Industrial Commission (NDIC) recently approved the fourth Class VI permit for a carbon capture and storage project in the Williston basin of North Dakota for the geological CO₂ storage in the Broom Creek formation. The current research aimed to …

Maximizing Charge Dynamics In Znin2s4/Cn Van Der Waals Heterojunction For Optimal Hydrogen Production From Photoreforming Of Glucose, Jinqiang Zhang, Xinyuan Xu, Lei Shi, Huayang Zhang, Shaobin Wang, Hongqi Sun

Research outputs 2022 to 2026

Biomass photoreforming stands out as a promising avenue for green hydrogen, leveraging solar energy for the generation and transformation of clean and renewable energy resources. The pursuit of efficient photocatalysts is motivated by the unsatisfied hydrogen evolution performance arising from the complex and stubborn structure of biomass. Herein, we loaded 2-dimensional (2D) ZnIn2S4 onto 2D carbon nitride nanosheets, resulting in the formation of Van der Waals (VDW) heterojunctions (ZIS/CN). Band structure and morphology of CN were rationally tailored through precursor engineering to effectively magnify interfacial internal electric field and minimize diffusion pathway within the VDW heterostructure, realizing optimal charge dynamics …

High-Yield And Rapid Isolation Of Extracellular Vesicles By Flocculation Via Orbital Acoustic Trapping: Float, Joseph Rufo, Peiran Zhang, Zeyu Wang, Yuyang Gu, Kaichun Yang, Joseph Rich, Chuyi Chen, Ruoyu Zhong, Ke Jin, Je He, Jianping Xia, Ke Li, Jiarong Wu, Yingshi Ouyang, Yoel Sadovsky, Luke P. Lee, Tony Jun Huang

Faculty Publications

Extracellular vesicles (EVs) have been identified as promising biomarkers for the noninvasive diagnosis of various diseases. However, challenges in separating EVs from soluble proteins have resulted in variable EV recovery rates and low purities. Here, we report a high-yield ( > 90%) and rapid ( <  10 min) EV isolation method called FLocculation via Orbital Acoustic Trapping (FLOAT). The FLOAT approach utilizes an acoustofluidic droplet centrifuge to rotate and controllably heat liquid droplets. By adding a thermoresponsive polymer flocculant, nanoparticles as small as 20 nm can be rapidly and selectively concentrated at the center of the droplet. We demonstrate the ability of FLOAT to separate urinary EVs from the highly abundant Tamm-Horsfall protein, addressing a significant obstacle in the development of EV-based liquid biopsies. Due to its high-yield nature, FLOAT reduces biofluid starting volume requirements by a factor of 100 (from 20 mL to 200 µL), demonstrating its promising potential in point-of-care diagnostics.

Geodetic Strain Rates For The 2022 Update Of The New Zealand National Seismic Hazard Model, Jeremy Maurer, Kaj Johnson, Laura M. Wallace, Ian Hamling, Charles A. Williams, Chris Rollins, Matt Gerstenberger, Russ Van Dissen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Geodetic data in plate boundary zones reflect the accrual of tectonic strain and stress, which will ultimately be released in earthquakes, and so they can provide valuable insights into future seismic hazards. To incorporate geodetic measurements of contemporary deformation into the 2022 revision of the New Zealand National Seismic Hazard Model 2022 (NZ NSHM 2022), we derive a range of strain-rate models from published interseismic Global Navigation Satellite Systems velocities for New Zealand. We calculate the uncertainty in strain rate excluding strain from the Taupō rift–Havre trough and Hikurangi subduction zone, which are handled separately, and the corresponding moment rates. …

Upper Plate And Subduction Interface Deformation Models In The 2022 Revision Of The Aotearoa New Zealand National Seismic Hazard Model, Russ J. Van Dissen, Kaj M. Johnson, Hannu Seebeck, Laura M. Wallace, Chris Rollins, Jeremy Maurer, Matthew C. Gerstenberger, Charles A. Williams, Ian J. Hamling, Andrew Howell, Christopher J. Dicaprio

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As part of the 2022 revision of the Aotearoa New Zealand National Seismic Hazard Model (NZ NSHM 2022), deformation models were constructed for the upper plate faults and subduction interfaces that impact ground-shaking hazard in New Zealand. These models provide the locations, geometries, and slip rates of the earthquake-producing faults in the NZ NSHM 2022. For upper plate faults, two deformation models were developed: a geologic model derived directly from the fault geometries and geologic slip rates in the NZ Community Fault Model version 1.0 (NZ CFM v.1.0); and a geodetic model that uses the same faults and fault geometries …

Estimation Of Co2 Absorption By A Hybrid Aqueous Solution Of Amino Acid Salt With Amine, Farid Amirkhani, Amir Dashti, Hossein Abedsoltan, Amir H. Mohammadi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Four developed machine learning algorithms are proposed to prognosticate the CO₂ solubility in amino acid salt solutions, blended with amine solutions as additives, in broad ranges of temperature and pressure. From literature 375 experimental data points for CO₂ solubility were collected. The results from the applied algorithms indicated that the CO₂ solubility is estimated acceptably close to the experimental values. In the best case, the developed network estimates CO₂ solubility in the stated solutions with an average relative deviation of 6.53 % and a correlation coefficient of 0.9892.

In Vitro Assessment Of Protamine Toxicity With Neural Cells, Its Therapeutic Potential To Counter Chondroitin Sulfate Mediated Neuron Inhibition, And Its Effects On Reactive Astrocytes, Derek W. Nelson, Jessica L. Funnell, Conrad H. Cheung, Geraldine B. Quinones, Christina S. Mendoza, Marvin Bentley, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Multiple therapies have been studied to ameliorate the neuroinhibitory cues present after traumatic injury to the central nervous system. Two previous in vitro studies have demonstrated the efficacy of the Food and Drug Administration-approved cardiovascular therapeutic, protamine (PRM), to overcome neuroinhibitory cues presented by chondroitin sulfates; however, the effect of a wide range of PRM concentrations on neuronal and glial cells has not been evaluated. In this study, we investigate the therapeutic efficacy of PRM with primary cortical neurons, hippocampal neurons, mixed glial cultures, and astrocytes. The threshold for PRM toxicity is shown to be at or above 10 µg …

Identification Of Early Opportunities For Simultaneous H2 Separation And Co2 Storage Using Depleted Coal Seams, Masoud Aslannezhad, Mohammad Sayyafzadeh, Stefan Iglauer, Alireza Keshavarz

Research outputs 2022 to 2026

Hydrogen (H2) production by steam methane reforming (SMR) is an economically viable technique on a commercial scale. However, this process produces large amounts of carbon dioxide (CO2), which eventually negates the benefits of employing H2 as an industrial input and clean energy carrier. This issue has led to increasing interest in capturing CO2 emissions from SMR to produce H2. This study proposes and investigates the use of coalbed methane (CBM) resources for separating the mixture of H2 and CO2 gases. The competitive adsorption mechanism in CBM not only can separate the H2 gas from the mixture but also results into …

Inhibited Surface Diffusion In Nanoporous Multi-Principal Element Alloy Thin Films Prepared By Vacuum Thermal Dealloying, Tibra Das Gupta, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Nanoporous structures with 3D interconnected networks are traditionally made by dealloy- ing a binary precursor. Certain approaches for fabricating these materials have been applied to refrac- tory multi-principal element alloys (RMPEAs), which can be suitable candidates for high-temperature applications. In this study, nanoporous refractory multi-principal element alloys (np-RMPEAs) were fabricated from magnesium-based thin films (VMoNbTaMg) that had been prepared by magnetron sputtering. Vacuum thermal dealloying (VTD), which involves sublimation of a higher vapor pres- sure element, is a novel technique for synthesizing nanoporous refractory elements that are prone to oxidation. When VMoNbTaMg was heated under vacuum, a nanoporous structure was …

The Roles Of Carbonaceous Wastes For Catalysis, Energy, And Environmental Remediation, Chi Huey Ng, Mohd Aizzan Mistoh, Siow Hwa Teo, Andrea Galassi, Hin Taufiq-Yap, Nancy Julius Siambun, Jurry Foo, Coswald Stephen Sipaut, Jeffrey Seay, Jidon Janaun

Chemical and Materials Engineering Faculty Publications

This article reviews recent studies about various generations of the carbon materials for their applications in energy and environmental remediation. The synthesis routes of the carbon materials including the condition parameters, interaction of precursors, dopants and carbon materials, as well as their physical/chemical properties are explicated first. Then, the application and mechanism of metal-free/metal-doped/non-metal-doped carbon materials are discussed in detail. Lastly, this review is ended with a summary and invigorating perspectives on the challenges and future directions at the forefront of the catalysis platform to take a step further for real application.

Investigating The Structure And Performance Of Electrodes Made By Dry And Wet Slurry Processes, Kubra Uzun, Bhamiti Sharma, Bradley R. Frieberg, Ming Wang, Jiazhi Hu, Anita Li, Xiaosong Huang, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

Performance, cost, and safety are vital factors in producing and handling lithium-ion batteries. Using a dry process reduces the cost and environmental impact of producing large-scale lithium-ion battery electrodes significantly as solvents are eliminated. Thus, in this study, solvent-free dry electrostatic spray deposition (ESD) and conventional slurry processes were compared to uncover the influence of the manufacturing process on thick LiNi 0.8Mn0.1Co 0.1O 2 (NMC 811) positive electrodes. More pressure during calendering was found necessary for the dry-made (dry) electrodes to have the same porosity, leading to more cracks within the NMC particles and better adhesion. At slower discharge rates, …

High Temperatures And Low Soil Moisture Synergistically Reduce Switchgrass Yields From Marginal Field Sites And Inhibit Fermentation, Sarvada Chipkar, Kevin Kahmark, Sven Bohm, Mir Zaman Hussain, Leela Joshi, Karleigh M. Krieg, Jacob Aguado, Jasmine Cassidy, Pablo Lozano, Kevin Garland, Andrea Senyk, Derek J. Debrauske, Elizabeth Whelan, Morgan Davies, Paul Urban, G. Philip Robertson, Trey K. Sato, Stephen K. Hamilton, Kurt D. Thelen, Rebecca Ong

Michigan Tech Publications

‘Marginal lands’ are low productivity sites abandoned from agriculture for reasons such as low or high soil water content, challenging topography, or nutrient deficiency. To avoid competition with crop production, cellulosic bioenergy crops have been proposed for cultivation on marginal lands, however on these sites they may be more strongly affected by environmental stresses such as low soil water content. In this study we used rainout shelters to induce low soil moisture on marginal lands and determine the effect of soil water stress on switchgrass growth and the subsequent production of bioethanol. Five marginal land sites that span a latitudinal …

Biomolecular Crystals As Functional Materials, Fahmeed Khan Sheehan

Dissertations, Theses, and Capstone Projects

The field of supramolecular chemistry has undergone significant evolution over the last few decades, progressing from fundamental studies of self-assembling systems to the rational design of functional materials with exceptional properties. Among these materials, short peptides have emerged as a chemically simple yet highly versatile class of biomimetic compounds. Initially, short peptides were used as model systems to understand larger protein interactions. As the field progressed, short peptides were found to have exceptional functionality, and are now explored as functional nanomaterials for diverse applications. In many cases, short peptide materials have displayed properties not found in biology, in some cases …

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha

Dissertations, Theses, and Capstone Projects

Heterogeneity is common in the expression of cancer and treatment response. Precision medicine enables healthcare providers to tailor medical care to an individual's distinct genetic and environmental makeup. This customization has the potential to result in more efficient treatments while minimizing side effects. We believe that by studying the interface of nanotechnology and cancer medicine we can elucidate innovative solutions that address the challenges of disease heterogeneity. This includes advancements in drug delivery, formulations development, and diagnostic sensing. We highlight three studies that use nanotechnology for applications in precision medicine. In Chapter 2, we highlight design optimization of drug formulations …

Towards A Fundamental Understanding Of The Polymer Cold Spray Process, Tristan Bacha

Theses and Dissertations

Cold spray technology lends itself as a versatile process to rapidly apply quality polymer coatings to various substrates; barring limited, although clearly demonstrated, success. The limited success of polymer sprays is a result of modern cold spray knowledge originating from studies with metals. Thus, a deeper understanding of how polymers behave in cold spray is needed to make polymer cold spray a commercially viable process. Various tools are used in this dissertation to progress the fundamental understanding of polymer cold spray as it relates to general processing parameters with a focus on characteristics that do not occur in metals. Polymer …

Biodiesel Transesterification Of Spent Coffee Grounds Using Dbu As A Catalyst: Using Dbu To Make Biodiesel From Coffee Grounds, Christopher Stepherson, Pericles Karras, Amy Ha, Phuc Tan Nguyen, Abigail Pati, Jacob Hejazi, Soheil Hussain, Elizabeth De Young, Shuaicheng Fu

The Journal of Purdue Undergraduate Research

Coffee is one of the most universally consumed beverages. The world produces 60 million tons of spent coffee grounds (SCGs) as waste per year. Biodiesel made from SCGs is an eco-friendly alternative fuel but proves difficult to produce. 1,8-Diazabicyclo[ 5.4.0]undec-7- ene (DBU) was used as both a solvent and a catalyst with methanol to determine the efficiency of biodiesel production from SCGs. The process was completed by extracting coffee oil from acid-washed spent coffee grounds (AWSCGs) using hexane. The two extraction methods that were explored were Soxhlet and agitation. DBU is an interesting choice as a solvent and a catalyst …