Engineering Commons^™

New Models For Estimating Minimum Miscibility Pressure Of Pure And Impure Carbon Dioxide Using Artificial Intelligence Techniques, Attia Attia, Ahmed Ashraf Soliman Eng., John Shahat Eng., Sayed Gomaa Prof., Fares Ashraf El Salamony Prof.

Petroleum Engineering and Gas

CO2 miscible flooding stands out as one of the most-commonly employed and promising processes in enhanced oil recovery. The key factor for ensuring success in designing and executing CO2 injection projects lies in the precise determination of the Minimum Miscibility Pressure (MMP). Despite significant research endeavors in measuring and predicting the MMP through the use of empirical, analytical, numerical, and experimental approaches, the need for a comprehensive, accurate, efficient, and easy-to-use model remains. In response to this gap, our study developed various predictive models with 205 datasets, including well-established ones such as Artificial Neural Network (ANN), Random Forest (RF), and …

Adsorption Of Crystal Violet Dye From Synthetic Wastewater By Ball-Milled Royal Palm Leaf Sheath, Neloy Sen, Nawrin Rahman Shefa, Kismot Reza, Sk Md Ali Zaker Shawon, Md. Wasikur Rahman

Physics & Astronomy Faculty Publications

The current study shows that using a batch approach to remove crystal violet dye from synthetic wastewater is feasible when using royal palm leaf sheath powder as an adsorbent. In order to investigate the effects of many parameters, including starting concentration, pH effect, dye concentration, adsorbent dose, contact time, and temperature, experiments were carried out under various operating conditions. Maximum removal was obtained at pH 6 and at a concentration of 100 ppm, which are considered as ideal values. The influence of pH and dye concentration was shown to be substantial. Langmuir, Freundlich, and Temkin isotherm models were fitted to …

Thermal, Electrical, And Spin Transport: Encompassing Low-Damping Ferromagnets And Antiferromagnetic/Ferromagnetic Heterostructures, Matthew Ryan Natale

Electronic Theses and Dissertations

Continuing technological advancements bring forth escalating challenges in global energy consumption and subsequent power dissipation, posing significant economic and environmental concerns. In response to these difficulties, the fields of thermoelectrics, spintronics, and spincaloritronics emerge as contemporary solutions, each presenting unique advantages. Thermoelectric devices, based on the Seebeck effect, other a passive, carbon-free energy generating solution from waste heat. Although current thermoelectric technology encounters hurdles in achieving optimal efficiencies without intricate designs or complex materials engineering, recently research into low-damping metallic ferromagnetic thin films have provided a new method to enhance spin wave lifetimes, thus contributing to thermoelectric voltage improvements. As …

Advancement In Heavy Oil Upgrading And Sustainable Exploration Emerging Technologies, Youssef Yatimi, Jihane Mendil, Meena Marafi, Ahmed Alalou, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Upgrading heavy oil is a subject of high importance for fossil fuel industry due to the rapid depletion of light oil reservoirs and the consequent increased demand for upgrading heavy oil. In this review, the advancement made in heavy oil upgrading and the proposed sustainable emerging technologies dedicated to heavy oil processing have been discussed in a comprehensive and informative manner with consideration to the encountered associated with properties of heavy oil including its significant content of undesirable large molecular weight hydrocarbons, its high viscosity, and its elevated impurity level. The shortcomings of conventional crude oil upgrading technologies are outlined, …

Applications Of Plastics In The Automotive Industry: Current Trends And Future Perspectives, Hossein Abedsoltan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Plastics have transformed the automotive industry, contributing substantially to automobile design, weight reduction, fuel efficiency, safety, and sustainability. This review paper examines the applications of plastics in the automotive sector, evaluates the present trends, and describes the future plastic consumption possibilities, emphasizing emerging technology and sustainable practices. The paper delineates how plastics have become an essential component of automotive innovation and illustrates the possibilities for additional breakthroughs in this dynamic industry. Highlights: Advances in plastics, bioplastics, and smart materials in the auto industry. Plastic role in design, safety, and sustainability in the auto industry. Recycling and the circular economy of …

Local Strain Quantification Of A Porous Carbon Fiber Network Material, Robert N Quammen, Paul F. Rottmann

Chemical and Materials Engineering Faculty Publications

While porous materials’ wide range of attractive functional properties have led to their development for a variety of applications, their intrinsically stochastic microstructures prevent straightforward approaches to predicting their mechanical behavior. This is attributed to the mechanisms that govern the macroscale behavior of these materials operating on multiple microstructure-specific length scales spanning several orders of magnitude. The goal of this work was to experimentally observe these operative deformation mechanisms to better improve the development of mechanism-informed models that more accurately predict the behavior of these materials. In this study compression tests were conducted on a porous carbon fiber network material. …

The Janssen Effect And The Chini Ordinary Differential Equation, Adam Rogers, George Dyck, Jitendra Paliwal, Kurt Hildebrand, Michael D. Montross, Aaron P. Turner

Chemical and Materials Engineering Faculty Publications

The Janssen effect describes the increase in pressure with depth in granular materials. However, the original Janssen formulation treats the density as constant. In this work, we examine parametric density models that depend on both pressure and moisture content and allow for temperature dependence to be easily included. We focus on physically-motivated empirical models that are built on power-law terms. These power-law terms correspond to thermodynamic equations of state, such as the ideal gas law, and polytropic processes. When coupled with the Janssen ordinary differential equation (ODE), these power-law models have the form of a Chini ODE. We study the …

Protocol For Modeling And Simulating Lithiation-Induced Stress In Largely Deformed Spherical Nanoparticles Using Comsol, Yong Li, Yungpeng Guo, Yunhao Wu, Yin Rao, Kai Zhang, Dashun Liu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Here, we present a finite element method-based scheme for solving coupled par- tial differential equations (PDEs) for the analysis of lithiation-induced stress in largely deformed spherical nanoparticles via the PDE module in COMSOL. We describe steps for software installation and setting PDEs, initial/boundary condi- tions, and mesh parameters. We then detail procedures for dividing the mesh and analyzing lithium trapping during electrochemical cycling. This protocol can also be extended to analyze a wide range of problems involving diffusion-induced stress. For complete details on the use and execution of this protocol, please refer to Li et al.

Pd-Modified Cuo-Zno-Al2o3 Catalysts Via Mixed-Phases-Containing Precursor For Methanol Synthesis From Co2 Hydrogenation Under Mild Conditions, Xiao Fan, Kaiying Wang, Xiaoqing He, Shiguang Li, Miao Yu, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

A series of palladium-modified (Pd-modified) CuO-ZnO-Al2O3 (CZA) catalysts with various Pd loadings (0.3 wt% to 2.4 wt%) were prepared using the wetness impregnation method, on two CZA supports with different structures that are CZA-aged precursor composed of a mixture of zincian-malachite and hydrotalcite-like phases (CZA-zH), and CuO-ZnO-Al2O3 metal oxide nanoparticles (CZA-MO). Enhancement on catalytic activity can be observed on both Pd-modified CZA catalysts in a temperature range of 180–240 °C for methanol synthesis via CO2 hydrogenation. Pd/CZA-zH catalysts exhibited a more efficient and stable production of methanol at a relatively low reaction temperature of 180 °C for 100 hrs. of …

Utilization Of Caputo Fractional Derivative In Mhd Nanofluid Flow With Soret And Thermal Radiation Effects, Harshad Patel, Gopal Nanda

Applications and Applied Mathematics: An International Journal (AAM)

In existence of heat diffusion and thermal radiation, an analytical equation is found for unsteady MHD flow past an exponentially accelerating vertical plate in optically thick water based nanofluid. The governing equations are made dimensionless by similarity transformation. A definition of Caputo fractional derivative is applied to generalize governing system of partial differential equations. Laplace transform techniques are applied and obtained the analytical solutions of proposed problems. For a physical point of view, numerical results are obtained using MATLAB software and presented via graphs. From the results, it is concluded that magnetic fields tend to reduce velocity. It is also …

Spontaneous Alignment Of Myotubes Through Myogenic Progenitor Cell Migration, Lauren E. Mehanna, Adrianna R. Osborne, Charlotte A. Peterson, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

In large-volume muscle injuries, widespread damage to muscle fibers and the surrounding connective tissue prevents myogenic progenitor cells (MPCs) from initiating repair. There is a clinical need to rapidly fabricate large muscle tissue constructs for integration at the site of large volume muscle injuries. Most strategies for myotube alignment require microfabricated structures or prolonged orientation times. We utilize the MPC’s natural propensity to close gaps across an injury site to guide alignment on collagen I. When MPCs are exposed to an open boundary free of cells, they migrate unidirectionally into the cell-free region and align perpendicular to the original boundary …

Laboratory Evaluation Of High-Temperature Resistant Lysine-Based Polymer Gel Systems For Leakage Control, Tao Song, Xuyang Tian, Baojun Bai, Yugandhara Eriyagama, Mohamed Ahdaya, Adel Alotibi, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In-situ crosslinking gel known for its cost-effectiveness, has been employed for decades to plug high-permeability features in subsurface environments. However, some commonly used crosslinkers are being phased out due to the increasingly rigorous environmental regulations. As a newly discovered environmentally friendly crosslinker, lysine can crosslink the partially hydrolyzed polyacrylamide through transamidation reaction. The present work aimed to study the effect of polymer composition and concentration on the gelation behavior of lysine and high molecular weight acrylamide-based polymers. Several commercial high molecular weight polymers with different contents of 2-Acrylamido-2-methyl-1-propane sulfonic acid (AMPS) including AN-105/125, SAV-55/37/28, and SAV-10 were deployed in this …

Inverting Geodetic Strain Rates For Slip Deficit Rate In Complex Deforming Zones: An Application To The New Zealand Plate Boundary, Kaj M. Johnson, Laura M. Wallace, Jeremy Maurer, Ian Hamling, Charles Williams, Chris Rollins, Matt Gerstenberger, Russ Van Dissen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The potential for future earthquakes on faults is often inferred from inversions of geodetically derived surface velocities for locking on faults using kinematic models such as block models. This can be challenging in complex deforming zones with many closely spaced faults or where deformation is not readily described with block motions. Furthermore, surface strain rates are more directly related to coupling on faults than surface velocities. We present a methodology for estimating slip deficit rate directly from strain rate and apply it to New Zealand for the purpose of incorporating geodetic data in the 2022 revision of the New Zealand …

Layered Mantle Flow Field Associated With Plate Kinematics And Slab Modulation Underneath The Horseshoe-Shaped Banda Arc-Islands, Sijia Li, Fansheng Kong, Kelly H. Liu, Stephen S. Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Banda Arc-Continent Collision Zone Signifies One Of The Most Seismically Active And Tectonically Intricate Zones. The High Convergence Rate Across The Region, Coupled With The Exceptionally Arcuate Arc And Subducted Slab, Makes It An Ideal Locale For Investigating Interactions Between Plate (Slab) Kinematics And Plastic Flow In The Asthenosphere, Which Can Be Diagnosed By Seismic Anisotropy From Shear Wave Splitting Analyses. In Total, 206 Pairs Of Splitting Measurements Using Teleseismic SKS, SKKS, And PKS, Along With 43 Pairs Using Local S Phases, Are Obtained By Utilizing Broadband Seismic Data From Five Permanent Seismic Stations. To Reduce The Ambiguity In …

Strategy For Predictive Control Of The Rectification Process Based On A Model Controller With A Given Forecast, Ildar Rafkatovich Sultanov

Chemical Technology, Control and Management

A method is being developed to optimize the generated controls for the multicomponent distillation process with prediction, based on predictive data with a moving horizon. The difference between this method and the classical modeling approach, in which the percentage of the degree of opening of valves installed on the output streams of the column is used as control actions, is that control occurs on the feedback principle. The proposed method is based on the use of a dynamic process model to optimize control actions in real time in order to achieve certain production targets. The essence of the MPC approach …

A Neural Network Model For Monitoring And Forecasting The Process Of Storing Oilseeds, N.A. Kabulov

Chemical Technology, Control and Management

The paper presents the results of research on the control, forecasting and management of the storage process of oilseeds. Vegetable oil production and energy consumption are two important factors of oilseed storage systems. The first ones should meet the needs of the population quantitatively and qualitatively. As a result, in order to properly control these two important aspects, it is necessary to maintain an appropriate microclimatic environment using a computational decision support system (DSS) that is able to adapt to changes in environmental characteristics. The multilayer perceptron neural network (MLP-NN) was developed to simulate the temperature and relative humidity profiles …

Chromatographic Analysis Of The Chemical Composition Of Pyrolysis Distillate, Sh.T. Juraev, B.F. Muxiddinov, U.T. Tailakov

Chemical Technology, Control and Management

The paper presents the results of a study of the physico-chemical characteristics of the liquid fraction of products of thermal oxidative pyrolysis of worn tires. The mass fraction of the volatile gas compounds, the optimal boiling points of the obtained condensates and the flashpoint of pyrolysis liquids, together with the mass composition of cracking products of rubber products at high-temperature pyrolysis at a temperature of 800-900 °C, were determined. Chromatographic analysis allowed us to determine the composition, mainly the mass composition of pyrolysis products, which consisted of carbon (42.8%), higher aliphatic and aromatic hydrocarbons (17.0%), methane (10.2%), benzene (4.2%) and …

Identification Of Faults In Highways Using Approximation Methods And Algorithms, Khudayberdiyev Khakkulmirzayevich Mirzaakbar, Anvar Asatilloyevich Ravshanov

Chemical Technology, Control and Management

Many fast Fourier transforms are used to identify defective parts of uneven surfaces on roads and send information to relevant organizations on the road, using the " RAVON YO‘LLAR" application installed on a mobile device during car movement. We determine the uneven parts of the road. Smooth and well-maintained roads reduce the risk of vehicle collisions, skidding and other road-related incidents. Timely measures contribute to overall safety, comfort and economic efficiency.

Analytical-Critical Review Of Widely Used Industrial Devices For Drying Mineral Fertilizers, Djalolitdin Paxritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

The article is devoted to the review of the modern state of research in the mineral fertilizers drying field, critical analysis and comparison of widely used drying apparatuses. There are procedures of preliminary equipment selection for soluble fertilizers industrial drying on the basis of such criteria as productivity, efficiency, energy saving, environmental impact degree, indicating the possible advantages and disadvantages of different application variants.

Calculation Of Hydraulic Resistance Of A Tubular-Gridse Nozzle With Spiral Turbulizers, Nurmukhamedov Habibulla Sagdullaevich, Mavlonov Elbek Tulkinovich, S.Kh. Nishonova, Kh.S. Nurmukhamedov

Chemical Technology, Control and Management

The article presents the results of an experimental study on the hydraulic resistance of a tubular-grid nozzle made of smooth pipes and pipes with spiral turbulators. Experiments were carried out with nozzles made of smooth pipes and pipes with turbulators. Spiral turbulators are placed discretely with a step t/d=0,3125-0,9375 and installed on a tube sheet in a checkerboard pattern with a step s/d=1,15-10. Experimental studies were carried out with air flow in the transition region.

It has been established that with increasing numerical values of the dimensionless parameter s/d, the resistance of the pipe package decreases from 1,3 to 1,8 …

Development Of A Mathematical Model Of Magnetic Field Distribution In Magnetic Conductors Of A Wide-Range Current Transformer, Abdurauf Safarov

Chemical Technology, Control and Management

The article is devoted to the analysis of the distribution of the magnetic field in the magnetic conductors of a wide-range current transformer for the development of a mathematical model that can be used as the basis for calculating its static characteristics and error. The design, replacement circuits and design model of a current transformer are given. The relations of magnetic induction and tension from the coordinate of the position of the primary winding are obtained. It is shown that the conversion range can be adjusted depending on the different positions of the bus with current, as a result of …

Synthesize A Neural Network Parameter Optimizer For An Adaptive Pid Controller, Nashvandova Gulruxsor Murot Qizi

Chemical Technology, Control and Management

Wide application of proportional-integral-differential (PID)-regulator in industry requires constant improvement of methods of its parameters superstructuring. In the paper, the questions of optimization of PID-regulator parameters with application of methods of neural network technology are considered. A methodology for selecting the architecture of neural network optimizer designed to determine the tuned parameters of PID regulator is proposed. The algorithm of training of the neural network, with the set on the basis of the method of inverse gradient propagation is offered. The proposed improved PID-neural regulator allowed to provide stabilization of neural network operation and its trainability in the control loop …

Development Of A Criterion Assessing The Level Of Relationship Of Multiple Identified Characteristics For Classification, Mirzoyan Mirzaaxmedovich Kamilov, Oybek Zokirovich Koraboshev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article discusses an optimized version of the standard design developed by Yu.I.Zhuravlev, an optimization procedure through an algebraic approach based on precedent algorithms that solves the problem of pattern identification. The formation of the convex hull of the recognition operator and corrective procedures of information models by mutual compensation of each other was also studied. In addition, the functional connection of recognition operators and the definition of idempotent connection of operators are analyzed.

Influence Of Alkali Metal Cations On The Oxygen Reduction Activity Of Pt5Y And Pt5Gd Alloys, Kun-Ting Song, Alexandra Zagalskaya, Christian M. Schott, Peter M. Schneider, Batyr Garlyyev, Vitaly Alexandrov, Aliaksandr S. Bandarenka

Department of Chemical and Biomolecular Engineering: Faculty Publications

Electrolyte species can significantly influence the electrocatalytic performance. In this work, we investigate the impact of alkali metal cations on the oxygen reduction reaction (ORR) on active Pt₅Gd and Pt₅Y polycrystalline electrodes. Due to the strain effects, Pt alloys exhibit a higher kinetic current density of ORR than pure Pt electrodes in acidic media. In alkaline solutions, the kinetic current density of ORR for Pt alloys decreases linearly with the decreasing hydration energy in the order of Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺, whereas Pt shows the opposite trend. To gain …

In Situ Chlorine Generation And Rare Earth Chlorination By Molten Salt Electrolysis, Mark Schvaneveldt, Tyler Williams, Ranon Fuller, Devin Rappleye

Faculty Publications

Chloride volatility processes for purifying actinide and rare earth elements have historically required the use of Cl₂ tanks. To minimize the hazards associated with these processes, an apparatus was designed to produce Cl₂ via molten salt electrolysis. Within this apparatus, one can generate Cl₂, chlorinate metals, and consume excess Cl₂. Here, electrode materials were tested for their ability to generate Cl₂, the composition of the gaseous electrolysis product was evaluated using a quadrupole mass spectrometer, and a Ce foil sample was successfully chlorinated using the electrochemically generated Cl₂.

Investigation Of Fault Detection And Redundant Control Strategy For Model Predictive Control Of Distillation Column, Rajalakshmi R

Theses and Dissertations

Model Predictive Controller (MPC) is one of the industrial-ready control systems and an ideal choice for complex, slow-varying, and energy-intense Distillation Columns (DC). However, MPCs are subjected to failures and their performance degrades with faults and disturbances. Hence, there is a need for a redundant control strategy to ensure the continuous operation of MPC-controlled DC, which is investigated in this work.

A pilot-plant binary DC used to separate methanol and water is implemented with a computer-controlled system and is subjected to Pseudorandom Binary Excitation Signals (PRBS). The output response acquired is used to develop a MIMO (Multi-Input Multi- Output) state-space …

Artificial Neural Network Modeling Applied For Predicting Reformate Yield And Research Octane Number In The Reforming Process, Badiea S. Babaqi, Abdelrigeeb Ali Al-Gathe, Mohd S. Takriff, Hassimi Abu Hasan, Mohammed H. Al-Douh

Hadhramout University Journal of Natural & Applied Sciences

The prediction model of the continuous catalytic regeneration reforming process was developed for expecting the reformate yield and research octane number using an Artificial Neural Network technique (ANN) to improve the process performance. The proposed model includes temperatures, pressures, and hydrogen to hydrocarbon molar ratio as input parameters while the output of the process represents reformate yield and research octane number. The ANN model was carried out to estimate the process behavior based on the Levenberg-Marquardt Algorithm, which included the nine input parameters, two hidden layers (10-5 neurons), and two parameters as network outputs. The results obtained were that the …

Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

A system that manages environmental issues of Small and Medium Enterprises (SMEs) from the time of acquisition of raw materials up to disposal of the product is not well clear, especially in Tanzania. Most of the studies have been conducted in the field of environment management but few of them address the evaluation of the management of SMEs activities with respect to the environment. Although the nature of activities of SMEs has little noticeable environmental implications at the individual level but the impact is large due to diversification and labour intensity of these SMEs. SMEs employ about 20% of the …

A Two-Stage Based Life Cycle And Principal Component Analysis For Decision Support Of Potential Municipal Solid Wastes Management Scenarios, Case Study Dar Es Salaam, Tanzania, Edwin Richard Ndibalema Dr

Tanzania Journal of Engineering and Technology (TJET)

In most of the urban areas of Tanzania, poor and inadequate solid waste management is a growing environmental and public health concern. Despite an array of solid waste management options, choosing an appropriate one remains a challenge. This study applied a novel two-stage-based approach to assess the environmental impacts and sustainability performance of the 27 scenarios for municipal solid wastes (MSW) management of Dar es Salaam City, Tanzania. In the first stage, the study utilized a life cycle analysis (LCA) to quantify the environmental impacts of MSW scenarios. In the second stage, the study used the principal component analysis (PCA) …

An Overview Of Maternity Healthcare Monitoring In Developing Nations, Godphrey Kyambille

Tanzania Journal of Engineering and Technology (TJET)

A healthcare monitoring arrangement is essential for frequently monitoring a patient's health status. Specifically, maternal healthcare systems for tracking are utilized to evaluate the clinical status and monitor any abnormal condition changes during all three trimesters. This paper's objective is to conduct an extensive literature review and acknowledge earlier initiatives and studies conducted previously in maternal health care monitoring. This review focuses on accumulating information from earlier work and presents a general overview of previous studies concerning maternal health care monitoring (MHCM). The paper focuses on the maternal healthcare systems in developing countries accessed by pregnant women during the antenatal …