Engineering Commons^™

Accelerometer Based Measurement For The Mapping Of Neck Surface Vibrations During Vocalized Speech, Mark Nolan, Brian Madden, Edward Burke

Conference Papers

This paper presents a detailed study of the vibrations on the surface of the neck during a vocalization of predefined fundamental frequency and intensity. This study was carried out as part of a wider investigation into the use of laryngeal vibrations as a channel of communication. Another potential application of this study is in identifying a suitable location for a hands-free electro-larynx for laryngectomees.

An analog accelerometer, with dimensions 5x5x1.6mm and of mass 80mg, was used to perform the measurements. It was connected to a 12-bit analog-to-digital converter via single strands of insulated wire with a diameter of 100μm. The …

A Modification To The Group Delay And Simulated Annealing Technique For Characterization Of Peripheral Nerve Fiber Size Distributions For Non-Deterministic Sampled Data, Robert B. Szlavik

Biomedical Engineering

The ability to determine the characteristics of peripheral nerve fiber size distributions would provide additional information to clinicians for the diagnosis of specific pathologies of the peripheral nervous system. Investigation of these conditions, using electro-diagnostic techniques, is advantageous in the sense that such techniques tend to be minimally invasive yet provide valuable diagnostic information. One of the principal electro-diagnostic tools available to the clinician is the nerve conduction velocity test. While the peripheral nerve conduction velocity test can provide useful information to the clinician regarding the viability of the nerve under study, it is a single parameter test that yields …

Post-Yield Relaxation Behavior Of Bovine Cancellous Bone, Travis A. Burgers, Roderic S. Lakes, Sylvana Garcia-Rodriguez, Geoffrey R. Piller, Heidi-Lynn Ploeg

Mechanical Engineering Faculty Publications

Relaxation studies were conducted on specimens of bovine cancellous bone at post-yield strains. Stress and strain were measured for 1000 s and the relaxation modulus was determined. Fifteen cylindrical, cancellous bone specimens were removed from one bovine femur in the anterior–posterior direction. The relaxation modulus was found to be a function of strain. Therefore cancellous bone is non-linearly viscoelastic/viscoplastic in the plastic region. A power law regression was fit to the relaxation modulus data. The multiplicative constant was found to be statistically related through a power law relationship to both strain (p < 0.0005) and apparent density (p < 0.0005) while the power coefficient was found to be related through a power law relationship, E(t, ε)= A(ε)t-n(ε), to strain (p < 0.0005), but not apparent density.

The Influence Of Work Of Fracture On Six Orthodontic Bonding Systems, Tyler S. Pritchard

Loma Linda University Electronic Theses, Dissertations & Projects

Introduction: Bonding is the primary method of attaching brackets to teeth in modem orthodontics. Thus, many studies have focused on the maximum shear bond strength values of orthodontic adhesives. In contrast, very little research has been performed considering the work of fracture of orthodontic bonding systems. Work of Fracture is defined as the area under the curve of a stress-strain graph. Previous shear bond strength studies measured the force necessary to produce bond failure. The purpose of this study was to measure the maximum shear force and displacement of six bonding systems and to calculate the work of fracture.

Materials …

Methods For Calculating Coronary Perfusion Pressure During Cpr, Michael P. Otlewski, Leslie A. Geddes, Michael Pargett, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Publications

Coronary perfusion pressure (CPP) is a major indicator of the effectiveness of cardiopulmonary resuscitation in human and animal research studies; however methods for calculating CPP differ among research groups. Here we compare the 6 published methods for calculating CPP using the same data set of aortic (Ao) and right atrial (RA) blood pressures. CPP was computed using each of the 6 calculation methods in an anesthetized pig model, instrumented with catheters with Cobe pressure transducers. Aortic and right atrial pressures were recorded continuously during electrically induced ventricular fibrillation and standard CPR. CPP calculated from the same raw data set by …

Assessment Of Electrospinning As An In-House Fabrication Technique For Blood Vessel Mimic Cellular Scaffolding, Colby M. James

Master's Theses

Intravascular devices, such as stents, must be rigorously tested before they can be approved by the FDA. This includes bench top in vitro testing to determine biocompatibility, and animal model testing to ensure safety and efficacy. As an intermediate step, a blood vessel mimic (BVM) testing method has been developed that mimics the three dimensional structure of blood vessels using a perfusion bioreactor system, human derived endothelial cells, and a biocompatible polymer scaffold used to support growth of the blood vessel cells. The focus of this thesis was to find an in-house fabrication method capable of making cellular scaffolding for …

A Pdms Sample Pretreatment Device For The Optimization Of Electrokinetic Manipulations Of Blood Serum, Timothy J. Abram

Master's Theses

This project encompasses the design of a pretreatment protocol for blood serum and adaption of that protocol to a microfluidic environment in order to optimize key sample characteristics, namely pH, conductivity, and viscosity, to enable on-chip electrokinetic separations. The two major parts of this project include (1) designing a pretreatment protocol to optimize key parameters of the sample solution within a target range and (2) designing /fabricating a microchip that will effectively combine the sample solution with the appropriate buffers to replicate the same bench-scale protocol on the micro-scale.

Biomarker detection in complex samples such as blood necessitates appropriate sample …

Development Of A Toolbox For The Kinematic Evaluation Of Hands-Up Video Games, Brooke Marie Odle

Theses

Children with cerebral palsy (CP) often have limited upper extremity (UE) control, Virtual reality (VR) is a current technology being evaluated as a form of UE therapy for children with CP, The systems currently available have been developed with games that cannot be graded to match the skill level of children with severely impaired UE control. A novel video game platform, "Hands-Up", has been developed at New Jersey Institute of Technology. The platform features software that allows for the customization of games and encourages users to make purposeful UE movements. To quantify changes and improvement in movement due to increased …

Preparation And Characterization Of An Electrospun Gelatin/Dendrimer Hybrid Nanofiber Dressing, Alicia P. Smith-Freshwater

Theses and Dissertations

A novel dendritic wound dressing was designed and characterized for its potential to treat chronic wounds. Comprised of gelatin, dendrimer, synthetic polymer and antibiotics, the dressing was electrospun to mimic the natural extracellular matrix (ECM). Gelatin is biocompatible, biodegradable, non-toxic, and easily available. The antibiotic, doxycycline, has the ability to inhibit matrix metalloproteinases. Matrix metalloproteinases, which occur in excess in chronic wounds, degrade the reconstituted ECM. Starburst™ polyamidoamine (PAMAM) dendrimer G3.5, which provides a versatile and structurally controlled architecture to construct nanomedicine, was covalently bonded to the gelatin backbone and electrospun into nanofibers with gelatin, doxycycline and stabilizing polymers. The …

Effects Of Non-Equilibrium Plasma On Eukaryotic Cells (Final Report: Grant Fa9550-06-1-0004), Mounir Laroussi, Fred C. Dobbs, Old Dominion University

Electrical & Computer Engineering Faculty Publications

This document is our final report describing the research activities carried out under AFOSR Grant FA9550-06-1-0004. First, descriptions of our cold plasma generation systems are presented. Two systems, developed with past and present AFOSR support, are available in our laboratory. The first is a pulsed device capable of emitting a cold plasma plume in room air. The second is an air plasma generator the core of which is a dielectric barrier discharge excited by a high AC voltage. Following these brief descriptions we first present the effects of an atmospheric pressure air plasma on four different types of eukaryotic microalgae. …

The Use Of A Tri-Axial Accelerometer To Measure Changes In Lower Extremity Fatigue During Functional Activity, Kristin Morgan

Theses and Dissertations

In 2004, the National Collegiate Athletic Association reported ankle sprain as the most frequent injury in soccer, basketball, and volleyball players. Further research found an increased likelihood with fatigue. Measuring fatigue during functional activities has been a longstanding problem. In this study, changes in ankle biomechanics were measured using a tri-axial accelerometer embedded in the shoe as subjects (n=12) performed a fatiguing activity. Data were collected from the accelerometer and from established devices that are considered the industry gold standard. Several kinetic and kinematic accelerometer derived variables were highly correlated with these standards (r2>0.90) and were associated with changes …

Parametric Model Of Head Related Transfer Functions Based On Systematic Movements Of Poles And Zeros With Sound Location For Pole/Zero Models, Bahaa W. Al-Sheikh Hussein

Electronic Theses and Dissertations

Directional transfer functions (DTFs), the directional components of the Head Related Transfer Functions (HRTFs), are generally measured at finite locations in azimuth and elevation. Thus models are needed to synthesize DTFs at finer spatial resolution than the measured data to create complete virtual auditory displays. In this research, minimum-phase all-pole and all-zero models were used for modeling both human and cat DTFs. Real cepstrum analysis has been used to represent minimum phase HRTFs in the time domain. For the human DTFs, model orders were chosen to achieve specific objective error criteria published in previous studies that were based on subjective …

Comparison Of Failure Mechanisms For Cements Used In Skeletal Luting Applications, O. Clarkin, D. Boyd, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass Polyalkenoate Cements (GPCs) based on strontium calcium zinc silicate (Sr-Ca-Zn-SiO₂) glasses and low molecular weight poly (acrylic acid) (PAA) have been shown to exhibit suitable compressive strength (65 MPa) and flexural strength (14 MPa) for orthopaedic luting applications. In this study, two such GPC formulations, alongside two commercial cements (Simplex ® P and Hydroset™) were examined. Fracture toughness and tensile bond strength to sintered hydroxyapatite and a biomedical titanium alloy were examined. Fracture toughness of the commercial Poly(methyl methacrylate) cement, Simplex® P, (3.02 MPa m^1/2) was superior to that of the novel GPC (0.36 MPa …

Creation Of Defined Single Cell Resolution Neuronal Circuits On Microelectrode Arrays, Russell Pirlo

All Dissertations

The way cell-cell organization of neuronal networks influences activity and facilitates function is not well understood. Microelectrode arrays (MEAs) and advancing cell patterning technologies have enabled access to and control of in vitro neuronal networks spawning much new research in neuroscience and neuroengineering. We propose that small, simple networks of neurons with defined circuitry may serve as valuable research models where every connection can be analyzed, controlled and manipulated.
Towards the goal of creating such neuronal networks we have applied microfabricated elastomeric membranes, surface modification and our unique laser cell patterning system to create defined neuronal circuits with single-cell precision …

The Tromped, A Means Of Prophylaxis For Flight Related Deep Vein Thrombosis, Carolyn Collins

Doctoral

The process of blood flow in the leg, against gravity and towards the heart is instigated by compression of the veins in the foot. Contraction of the calf muscles results in an ejection volume (EV) of blood towards the heart, completing the process. Research studies have shown an association between flight travel and deep vein thrombosis (DVT). Stasis of blood flow can lead to the development of thrombus formation. Deep Vein Thrombosis occurs in situations where people are immobile for long periods of time, whether this is a result of ill health or travel on land or in the air. …

Development Of An Electroencephalography-Based Brain-Computer Interface Supporting Two-Dimensional Cursor Control, Dandan Huang

Theses and Dissertations

This study aims to explore whether human intentions to move or cease to move right and left hands can be decoded from spatiotemporal features in non-invasive electroencephalography (EEG) in order to control a discrete two-dimensional cursor movement for a potential multi-dimensional Brain-Computer interface (BCI). Five naïve subjects performed either sustaining or stopping a motor task with time locking to a predefined time window by using motor execution with physical movement or motor imagery. Spatial filtering, temporal filtering, feature selection and classification methods were explored. The performance of the proposed BCI was evaluated by both offline classification and online two-dimensional cursor …

Spatial Detection Of Multiple Movement Intentions From Sam-Filtered Single-Trial Meg For A High Performance Bci, Harsha Battapady

Theses and Dissertations

The objective of this study is to test whether human intentions to sustain or cease movements in right and left hands can be decoded reliably from spatially filtered single trial magneto-encephalographic (MEG) signals. This study was performed using motor execution and motor imagery movements to achieve a potential high performance Brain-Computer interface (BCI). Seven healthy volunteers, naïve to BCI technology, participated in this study. Signals were recorded from 275-channel MEG and synthetic aperture magnetometry (SAM) was employed as the spatial filter. The four-class classification for natural movement intentions was performed offline; Genetic Algorithm based Mahalanobis Linear Distance (GA-MLD) and direct-decision …

Fabrication And Characterization Of Bioactive, Composite Electrospun Bone Tissue Engineering Scaffolds Intended For Cleft Palate Repair, Parthasarathy Madurantakam

Theses and Dissertations

Tissue Engineering is a scientific discipline that aims to regenerate tissues and organs that are diseased, lost or congenitally absent. It encompasses the use of suitable synthetic equivalents of native extracellular matrix that may or may not be supplemented with cells or relevant growth factors. Such scaffolds are designed to reside at the site of implantation for a variable period of time during which they induce the regeneration of native tissue. During this time, they also provide a template for new cells to attach, infiltrate, differentiate into appropriate phenotype and eventually restore function of the concerned tissue. Among the factors …

Discriminating Pulmonary Hypertension Caused By Monocrotaline Toxicity From Chronic Hypoxia By Near-Infrared Spectroscopy And Multivariate Methods Of Analysis, Simon Duri, Robert C. Molthen, Chieu D. Tran

Biomedical Engineering Faculty Research and Publications

A new method has been developed for the determination of tissue pathology caused by chronic hypoxia and monocrotaline toxicity. The method is based on the use of near-infrared (NIR) spectrophotometry to measure spectra of lung tissue from normal chronic hypoxia (CH) and monocrotaline (MCT) models of pulmonary hypertension (PH), followed by analysis using multivariate methods, that is, principal component analysis (PCA) and partial least squares (PLS). Synergistic use of NIR with the PCA/PLS method makes it possible, for the first time, not only to divide different lung tissue samples into their respective groups (normal, CH, and MCT) but also to …

Computational Modeling Of The Helical Axis In The Human Knee--Detecting Changes In The Transverse Plane, Emily Carney

Theses and Dissertations

The purpose of this study was to build a helical axis algorithm capable of detecting changes in the helical axis intersection of the tibia and femur in human knees. This algorithm was designed and tested using three models: a multiplanar rigid body model, a mathematical model, and a cylinder model. The multiplanar rigid body model closely mimics knee movement without supporting ligamentous structures, thus the movement was unconstrained. In this model kinematic position data were collected using both MotionMonitor™ (MotionMonitor™ Version 7.7, Innovative Sports Training, Chicago, IL) and Vicon Nexus 1.3 software system (Oxford Metrics Group, Oxford, UK). To test …

Video-Rate Near Infrared Tomography To Image Pulsatile Absorption Properties In Thick Tissue, Zhiqiu Li, Venkataramanan Krishnaswamy, Scott C. Davis, Subhadra Srinivasan, Keith D. Paulsen, Brian W. Pogue

Dartmouth Scholarship

A high frame-rate near-infrared (NIR) tomography system was created to allow transmission imaging of thick tissues with spectral encoding for parallel source implementation. The design was created to maximize tissue penetration through up to 10 cm of tissue, allowing eventual use in human imaging. Eight temperature-controlled laser diodes (LD) are used in parallel with 1.5 nm shifts in their lasing wavelengths. Simultaneous detection is achieved with eight high-resolution, CCD-based spectrometers that were synchronized to detect the intensities and decode their source locations from the spectrum. Static and dynamic imaging is demonstrated through a 64 mm tissue-equivalent phantom, with acquisition rates …

Department Of Biological Systems Engineering Newsletter, Volume 5, Number 1, July 2009

BSE Department Magazine

No abstract provided.

Micro, Nano Encapsulation Methods For Sustained Release Drug Formulations And Biomimetic Applications, Shantanu Balkundi

Doctoral Dissertations

The Layer-by-Layer (LbL) assembly technique was used to obtain a new type of protein/polyphenol microcapsule based on naturally occurring polyphenol (-)-epigallocatechin gallate (EGCG) and gelatin, type A. The dependence of permeability on the molecular weight of permeating substances was studied and compared with commonly used polyallylamine/polystyrene sulfonate capsules. A quartz crystal microbalance was used to monitor the regularities of EGCG adsorption in alternation with type A and B Gelatins and electrophoretic mobility measurements were used that indicated that the nature of assembly was dependent on Gelatin properties. It was shown that EGCG retains its antioxidant activity in the LbL assemblies. …

Comparison Of An Experimental Bone Cement With A Commercial Control, Hydroset™, O. M. Clarkin, D. Boyd, S. Madigan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glass polyalkenoate cements based on strontium calcium zinc silicate glasses (Zn-GPCs) and high molecular weight polyacrylic acids (PAA) (MW; 52,000-210,000) have been shown to exhibit mechanical properties and in vitro bioactivity suitable for arthroplasty applications. Unfortunately, these formulations exhibit working times and setting times which are too short for invasive surgical applications such as bone void filling and fracture fixation. In this study, Zn-GPCs were formulated using a low molecular weight PAA (MW; 12,700) and a modifying agent, trisodium citrate dihydrate (TSC), with the aim of improving the rheological properties of Zn-GPCs. These novel formulations were then compared with commercial …

Brain Tumor Progression Assessment Using Multiple Mri Volumes, Yufei Shen

Electrical & Computer Engineering Theses & Dissertations

Predicting and assessing tumor progression is important in brain tumor treatment. We attempt to use machine learning techniques to achieve consistency in assessing brain tumor progression. This thesis presents a prediction method of brain tumor progression by exploring a large MR database, which contains two patients ' complete records covering all their visits in the past two years. All ten MRI series, namely, apparent diffusion coefficient (ADC) , diffusion tensor imaging (DTI) , fractional anisotropy (FA), fluid attenuated inversion recovery (FLAIR), max eigenvalue (MAX), mid eigenvalue (MID), min eigenvalue (MIN) , post-contrast T₁-weighted, T₁- weighted, and …

Prostate Cancer Biomarker Identification: A Comparative Study, Wenjuan Jiang

Computational Modeling & Simulation Engineering Theses & Dissertations

With the current development of proteomics techniques, the discovery of potential molecular biomarkers for early detection of prostate cancer has been greatly improved. In this thesis, we implemented five classifiers including the support vector machine (SVM), Bayesian Classifier, Decision Tree, Random Forest and the Multilayer perceptron (MLP) to test their effectiveness in prostate cancer biomarker identification using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) tissue imaging data. The classifiers were utilized to discriminate cancer mass spectra from normal ones for the data collected at the Eastern Virginia Medical School (EVMS). There are 94 7 spectra from normal tissues and 27 from …

An Investigation Of The Use Of A High Resolution Adc As A Digital Biopotential Amplifier, Damon Berry, Frank Duignan, Richard Hayes

Conference Papers

Sigma delta analogue to digital converters have been used in many signal processing applications including some commercially available systems for sampling of bio-signals Bio-potential amplifiers have traditionally utilised specialised highquality analogue components to amplify bio-signals.

The central aim of this work is to investigate the benefits of using high-resolution sigma delta conversion as a digital amplification stage in the signal path of a bio-potential amplifier. A number of system arrangements specific to bio-potential measurement are presented and discussed. These arrangements are designed to use the high resolution capacity of the sigma delta converter in different ways, providing different benefits. To …

Influence Of Towing Force Magnitude On The Kinematics Of Supramaximal Sprinting, David A. Clark, Seth Kuhlman, Michelle B. Sabick, Ronald P. Pfeiffer, Nicole A. Knigge

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The purpose of this study was to determine the influence of towing force magnitude on the kinematics of supramaximal sprinting. Ten high school and collegiate aged track and field athletes ran 60m maximal sprints under 5 different conditions: non-towed (NT), Tow A (2.0% body weight), Tow B (2.8%BW), Tow C (3.8%BW), and Tow D (4.7%BW). Three-dimensional kinematics of a 4-segment model of the right side of the body were collected starting at the 35m point of the trial. Significant differences were observed in stride length (SL) and horizontal velocity of the center of mass (VH) during Tow C and Tow …

Optimal "Image-Based" Weighting For Energy-Resolved Ct, Taly Gilat Schmidt

Biomedical Engineering Faculty Research and Publications

This paper investigates a method of reconstructing images from energy-resolved CT data with negligible beam-hardening artifacts and improved contrast-to-nosie [sic] ratio (CNR) compared to conventional energy-weighting methods. Conceptually, the investigated method first reconstructs separate images from each energy bin. The final image is a linear combination of the energy-bin images, with the weights chosen to maximize the CNR in the final image. The optimal weight of a particular energy-bin image is derived to be proportional to the contrast-to-noise-variance ratio in that image. The investigated weighting method is referred to as “image-based” weighting, although, as will be described, the weights can …

Elastic, Viscous, And Mass Load Effects On Poststroke Muscle Recruitment And Co-Contraction During Reaching: A Pilot Study, Tina M. Stoeckmann, Katherine J. Sullivan, Robert A. Scheidt

Biomedical Engineering Faculty Research and Publications

Background: Resistive exercise after stroke can improve strength (force-generating capacity) without increasing spasticity (velocity-dependent hypertonicity). However, the effect of resistive load type on muscle activation and co-contraction after stroke is not clear.

Objective: The purpose of this study was to determine the effect of load type (elastic, viscous, or mass) on muscle activation and co-contraction during resisted forward reaching in the paretic and nonparetic arms after stroke.

Design: This investigation was a single-session, mixed repeated-measures pilot study.

Methods: Twenty participants (10 with hemiplegia and 10 without neurologic involvement) reached forward with each arm against equivalent elastic, viscous, and mass loads. …