Engineering Commons^™

Thrombogenicity Of Biodegradable Metals, D. E.J. Anderson, H. H. Le, H. Vu, J. Johnson, J. E. Aslan, J. Goldman, M. T. Hinds

Michigan Tech Publications, Part 2

Biodegradable metals offer a promising means to ameliorate many of the long-term risks associated with vascular devices made of conventional biostable stent metals. While numerous biodegradable metal alloys have been developed and characterized in animal models, knowledge of their blood reactivity and thrombogenicity remains unknown. Metal hemocompatibility is particularly valuable because current generation drug-eluting stents pose a significant long-term thrombosis risk. In this study, four pure metals, widely used as degradable base materials (Fe, Zn, Mg, and Mo), and three alloys commonly used in cardiovascular devices [NiTi, CoCr, and stainless steel (SS)] were evaluated. This work examined how each of …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Quantifying Variation Across 16s Rrna Gene Sequencing Runs In Human Microbiome Studies, Andrew J. Hoisington, Christopher E. Stamper, Joseph C. Ellis, Christopher A. Lowry, Lisa A. Brenner

Faculty Publications

Recent microbiome research has incorporated a higher number of samples through more participants in a study, longitudinal studies, and metanalysis between studies. Physical limitations in a sequencing machine can result in samples spread across sequencing runs. Here we present the results of sequencing nearly 1000 16S rRNA gene sequences in fecal (stabilized and swab) and oral (swab) samples from multiple human microbiome studies and positive controls that were conducted with identical standard operating procedures. Sequencing was performed in the same center across 18 different runs. The simplified mock community showed limitations in accuracy, while precision (e.g., technical variation) was robust …

Noninvasive Technique For Measuring Cardiac Output, Grace E. Kolar, Rachel Simonton, Eli Strohecker

Williams Honors College, Honors Research Projects

NA

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …

Naturify 2300, Yarina Yiwei Dai

Masters Theses

In my art practice, I explore the interplay between human desires to manipulate and anthropomorphize nature, as seen in the technological augmentation of plants and living entities. This investigation delves into how this intersection, alongside empathy towards these creations, contributes to fears of uncontrollability and the risks of addiction and excessive dependence on technology.

Bioengineering and genetic modification have cultivated unprecedented developments, allowing humans to manipulate the fundamental building blocks of life. My research speculates on this technology further, modifying the genetic code of organisms and creating bioengineered wearable entities with enhanced traits or entirely new functionalities. The primary objective …

Aerobic Exercise Improves Depressive Symptoms In The Unilateral 6-Ohda-Lesioned Rat Model Of Parkinson's Disease, Hannah Loughlin, Jacob Jackson, Chloe Looman, Alayna Starll, Jeremy Goldman, Zhiying Shan, Chunxiu Yu

Michigan Tech Publications, Part 2

Aerobic exercise has been shown to have established benefits on motor function in Parkinson's disease (PD). However, the impact of exercise on depressive symptoms in PD remains unclear. This study aimed to investigate the effects of regular exercise, specifically using a forced running wheel, on both motor performance and the prevalence of depression in a unilateral 6-OHDA-lesioned rat model of PD. The behavioral outcomes of exercise were assessed through the rotarod test (RT), forelimb adjusting step test (FAST), sucrose consumption test (SCT), and novelty sucrose splash test (NSST). Our data revealed evident depressive symptoms in the PD animals, characterized by …

Engineering An Injectable Hydrogel With Self-Assembling 3d Vasculature, Kendyl Cohn

Master's Theses

This research developed methods for culturing self-assembling capillaries in an injectable gel as a potential method for vascularizing tissue-on-a-chip models to mimic physiological drug delivery. Additionally, a mathematical model was developed as a tool for understanding nutrient delivery and comparison of potential delivery systems. Organs-on-a-chip provide novel platforms for studying biology and physiology in 3D, allow exploration of tissue engineering on a manageable scale, and serve as models for drug screening and drug-delivery testing.

Methods were first developed for co-culture of endothelial cells and fibroblasts (3T3s or HDFs) in 2D, evaluating culture time, seeding density and ratio of HUVECs and …

Impact Of Student Beliefs And Self-Efficacy On Performance In Higher Education Stem Courses, Lauren Nicole Fogg

Doctoral Dissertations

In engineering education, students often face feelings of inadequacy, leading to academic struggles and potential dropout. This dissertation investigates the impact of interactive course materials on students' confidence and self-efficacy in problem-solving, focusing on an Engineering Materials class at Louisiana Tech University. Over four quarters, involving seven sections and 218 students, a 13-question Likert scale survey was administered repeatedly, alongside demographic data and textbook usage surveys. The study aims to compare students’ attitudes and beliefs when not using a textbook versus when using an interactive web-native book. Hypotheses suggest that the interactive book will enhance problem-solving beliefs, confidence, and grades. …

Comparing Proliferation Rates And Collagen Production Of Cells Treated With Cuhars, Katie Elizabeth Mckenzie

Master's Theses

Cartilage is the padding in joints that protects the bones and aids in motion. Problems with the cartilage in the knee can be caused by mechanical damage or diseases like osteoarthritis. Chondrocytes make cartilage. The objective of this study is to determine the doubling time of chondrocytes per passage. I also want to determine the base amount of collagen-II created by chondrocytes as they age. I also want to determine how long it takes CuHARS to break down in different cell medias. Chondrocytes, human dermal fibroblasts, and CRL 2303 cells were grown and cultured for over a year. During that …

Diffuse Correlation Spectroscopy Measures Of Cerebral Blood Flow During Graded Hypoxia In Neonatal Piglets, Danielle Shoshany, Shadi Malaeb, Randolph Sinahon, Mert Deniz Polat, Meltem Izzetoglu, Patricia A. Shewokis, Kurtulus Izzetoglu

St. Chris Research Day

No abstract provided.

Long-Term Evolution Of Signs And Symptoms In Contact Lens Wearers, Laura Valencia-Nieto, Alberto López-De La Rosa, Alberto López-Miguel, María J. González-García

Ciencia y Tecnología para la Salud Visual y Ocular

El propósito del estudio fue describir la evolución de las adaptaciones de los lentes de contacto (LC) durante un largo periodo de tiempo, y determinar los factores responsables de los cambios en las adaptaciones. Se recogieron datos (tipo de LC, tiempo de uso, agudeza visual, síntomas y signos) de los usuarios de LC que acudieron a una consulta española entre 2010 y 2020. El perfil de los sujetos fue comparado entre 2010 y 2020. Las características de las LC se compararon entre los tipos, reemplazos y diseños de las LC. Finalmente, se evaluaron los factores predisponentes al cambio de LC. …

Modeling Synergistic Effects Of Integrin And Tgf-Beta Signaling In Epithelial Mesenchymal Transition, Prerak Thakkar

Biology and Medicine Through Mathematics Conference

No abstract provided.

Redesign Of Leg Assembly For Remote Walking Training Device To Improve Gait Kinematics, Jacob Anthony

Mechanical Engineering Theses

As modern medicine has improved, the average age of patients has increased. This has cause a growing number of patients to develop disabilities over time due to spinal cord injuries and stroke among other neurological ailments. This has led to an increased interest in developing robotic exoskeletons to help patients with neuromuscular rehabilitation. However, most exoskeletons do not accurately replicate the natural human gait kinematics due to a lack of degrees of freedom at the designed knee joint. In this thesis, the leg assembly for a robotic rehabilitation (RoboREHAB) device is redesigned to improve the gait kinematics and a reinforcement …

Self-Balancing Robot Leg, Ben Bolen

Student Research Symposium

Research in the Agile and Adaptive Robotics Lab involves the creation of biomimetic robots. To this end, we developed a self-balancing robot leg actuated with braided pneumatic actuators (BPAs)—a type of pneumatic artificial muscle. These BPAs, akin to human muscles, exhibit properties such as high strength-to-weight ratio and tunable passive stiffness. An Inertial Measurement Unit (IMU) was placed on top of the tibia for feedback and the tibia and foot were connected with a hinge joint. The orientation of the ankle joint was controlled with an Arduino microcontroller sending commands to the proportional pressure valves supplying the BPAs. Leg balance …

Integrating Implantable Bci Devices Within Bci2000 Using A Unified Framework And Toolchain For In-Vivo Research, Dhruva Mehta

McKelvey School of Engineering Theses & Dissertations

The field of neurotechnology research has a bright and promising future as more devices are created. However, there are still many gaps in the field as the potential for neuromodulation grows. Devices such as the Micro-Leads StimZ system and the Ripple Grapevine/Summit system help bridge that gap by allowing for a broader variety of closed-loop neuromodulation experiments to be implemented thanks to their portability and versatility. Despite these devices being on the market, however, there needs to be a method to collaborate and interact with them across multiple research institutions. BCI2000 helps to address that by creating a standardized working …

Evaluating Neuroimaging Modalities In The A/T/N Framework: Single And Combined Fdg-Pet And T1-Weighted Mri For Alzheimer’S Diagnosis, Peiwang Liu

McKelvey School of Engineering Theses & Dissertations

With the escalating prevalence of dementia, particularly Alzheimer's Disease (AD), the need for early and precise diagnostic techniques is rising. This study delves into the comparative efficacy of Fluorodeoxyglucose Positron Emission Tomography (FDG-PET) and T1-weighted Magnetic Resonance Imaging (MRI) in diagnosing AD, where the integration of multimodal models is becoming a trend. Leveraging data from the Alzheimer's Disease Neuroimaging Initiative (ADNI), we employed linear Support Vector Machines (SVM) to assess the diagnostic potential of these modalities, both individually and in combination, within the AD continuum. Our analysis, under the A/T/N framework's 'N' category, reveals that FDG-PET consistently outperforms T1w-MRI across …

Investigating Murine Uterine Tissue Dynamics: Biomechanical And Histological Perspectives On Postpartum Involution And Scar-Induced Remodeling, Savannah Elizabeth Chatman

McKelvey School of Engineering Theses & Dissertations

During pregnancy, the uterus undergoes structural and mechanical transformations to withstand the demands of a successful delivery. In cases where vaginal birth is not feasible, a Cesarean section (c-section), which involves a transverse abdominal incision, is used to facilitate delivery of the fetus and placenta¹. Following the procedure, the uterus and abdominal tissue are carefully sutured to support postpartum recovery, leading to uterine scarring at the incision site^1,2. Understanding the relationship between uterine scar integrity, postpartum involution, and the biomechanics of uterine tissue is a crucial step toward predicting the risk of uterine rupture during future …

Presence Of Atheromatous Plaques And Theirs Effects On The Blood Flow, Belhocine Mostefa Bm, Amrani Hichem Ah, Fedaoui Kamel Dr, Mazouz Hammoudi Mh

Emirates Journal for Engineering Research

The paper utilizes a finite element method to study both the blood flow and atheromatous plaques. Specifically, the COMSOL finite element package is employed to achieve a fluid model. COMSOL is a powerful finite element tool commonly used in various research and industrial domains to study multiphysics problems. The focus of the investigation is on the geometric aspects of the atheromatous plaques. The study considers different forms and arrangements of stenosis, taking into account the irregularities formed by various shapes of the plaques and the resulting flow patterns. The key findings of the research suggest that the pressure and velocity …

Analyzing Heat Generated From Electro-Osmotic Flow Utilizing Computational Fluid Dynamics, Jordan Elizabeth Grothe

Honors Thesis

Without extensive vascularization, the transfer of fluid and nutrients through human tissue is limited to diffusion and weak interstitial flow. Electroosmosis, or the flow of fluid driven by an electrical field, has become a promising solution. Scientists have begun applying electricity to human tissue to promote stronger interstitial flow; however, optimization of this process has proven to be a challenge due to ohmic heating. Cells function within a small range of temperatures and exposure to voltages exceeding the threshold will cause cells to degrade and die prematurely. This research seeks to better understand and quantify the range of voltage where …

Evaluating Tissue Morphology In The Context Of Varied Initial Fabrication Conditions, Cassidy Caffin

Biomedical Engineering Undergraduate Honors Theses

Cardiovascular diseases have been the leading cause of death for years. This includes myocardial infarctions (MI) where blood flow to the myocardium is restricted. This causes damage to cardiac muscle due to insufficient oxygen. There are multiple ways to treat patients following an MI with the most common involving assorted medication. However, there are limited medications that can be used for treating patients following MIs, and the FDA’s decreasing approval rate for new cardiac drugs will not dramatically improve the range of options. The lead-up to drug candidate rejection by the FDA can involve drugs exhibiting promising preliminary research that …

Development Of A Cost-Affordable Thin-Layer Chromatography Testing Kit For Falsified And Substandard Pharmaceuticals In Tanzania, Eleanor Hatcher

All Theses

A significant number of pharmaceuticals supplied to Tanzania are falsified or substandard. A majority of these inadequate pharmaceuticals are medications to treat life-threatening conditions. This problem not only causes mistrust in the healthcare system but also prolonged illness and potentially death for the patients. This calls for the need for the development of a cost-affordable testing kit for falsified and substandard pharmaceuticals in Tanzania. Thin-layer chromatography (TLC) was used as the testing method since it is inexpensive and requires a low skill level to complete. Malaria, human immunodeficiency virus, hypertension, tuberculosis, and diabetes are five of the most prevalent diseases …

Light-Induced Phase Separation Purification For Monoclonal Antibodies, Xuyang Chen

All Theses

none

Broadening The Application Range Of Cell-Free Protein Expression Systems, Matthew Becker

All Theses

Centralized protein manufacturing platforms make the delivery of needed therapies to places with limited infrastructure almost impossible. Cell-free protein expression systems, systems that utilize protein production machinery extracted from cells, offer these communities a viable protein expression platform that is robust and easily deliverable to the place of need. Much work in cell-free system engineering looks to increase the hardiness of cell-free system (CFS) components, like the extract and reaction buffer, needed to carry transcription and translation of gene therapeutic targets forward. Freeze- and air-drying of extract, reaction buffer, or both with certain additives, like sugar molecules, has been proposed …

Manufacturing Silicone In-House For The Creation Of Customized Neurovascular Blood Vessel Mimics, Jacob Wilbert Perisho

Master's Theses

The Tissue Engineering Lab at California Polytechnic State University San Luis Obispo focuses on creating tissue-engineered Blood Vessel Mimics (BVMs) designed for the preclinical testing of neurovascular devices. These BVMs are composed of silicone models, representing anatomically accurate neurovasculatures, that are sodded with vascular cell types and then cultivated in bioreactors (which maintain physiologic conditions). These silicone models are currently sourced externally from industry partners, so the primary goal of this thesis was to develop the means and methods for the Tissue Engineering Lab to manufacture silicone models in-house.

The first aim of this thesis was to develop and explore …

Dorsal Root Ganglia Neurite Outgrowth Following Traumatic Spinal Cord Injury Repair: A Review, Adrienne Vaughan

Biomedical Engineering Undergraduate Honors Theses

Traumatic spinal cord injury (tSCI) can cause partial sensorimotor deficiency or total dysfunction, rendering patients unable to perform necessary tasks and dramatically decreasing their quality of life. tSCI is a very prevalent issue. In the United States alone, there are approximately 54 new cases of SCI per one million people each year, or 18,000 new cases annually. tSCI creates a lesion gap filled with axon-inhibiting fibrotic scar tissue. Comprehensive functional recovery following traumatic spinal cord injury (tSCI) requires axonal regeneration across wound site lesions. Dorsal root ganglia (DRG) neurite outgrowth is often evaluated in PNI therapeutic research since it can …

Analyzing Diverse Student Experiences: The Intersection Of Equity, Inclusivity, And Biomedical Engineering Education Through A Clinical Observations And Needs Finding Course, Jacquelynn Horsey

Biomedical Engineering Undergraduate Honors Theses

In the field of biomedical engineering, needs identification and solution development are an important element of the design process. In our undergraduate curriculum, a course was designed to allow clinical observation and provide an opportunity for students to learn about engineering design and engage with clinicians via completing rotations in medical facilities near our campus. While this type of course is not unique, evaluating its efficacy is not simple. Given the broad range of institutional resources available- such as proximity to a medical school, or residency programs- reporting the quality of such courses within the context of such available resources …

Computational Predictions Of Heart Failure Drug Effects On Cardiac Fibrosis, Aaron Gardner

Chemical Engineering Undergraduate Honors Theses

The extracellular matrix is a complex system surrounding cells that is crucial to all of the cardiovascular system’s functions. Fibrosis is an excessive accumulation (scarring) of the extracellular matrix. Fibrosis is typically a negative event, and the scarring must be reduced in the heart in order to maintain its functionality. Due to this, simulations are run using the software “Netflux” in order to determine the effects of different heart failure drugs on cardiac fibrosis. The drugs that were simulated were an ACE Inhibitor, BAR Beta Blocker, ARB Blocker, and Entresto. These drugs were simulated over 50 hours at three different …

Data-Driven And Cell-Specific Determination Of Nuclei-Associated Actin Structure, Nina Nikitina, Nurbanu Bursa, Matthew Goelzer, Madison Goldfeldt, Chase Crandall, Sean Howard, Janet Rubin, Anamaria Zavala, Aykut Satici, Gunes Uzer

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Quantitative volumetric assessment of filamentous actin (F-actin) fibers remains challenging due to their interconnected nature, leading researchers to utilize threshold-based or qualitative measurement methods with poor reproducibility. Herein, a novel machine learning-based methodology is introduced for accurate quantification and reconstruction of nuclei-associated F-actin. Utilizing a convolutional neural network (CNN), actin filaments and nuclei from 3D confocal microscopy images are segmented and then each fiber is reconstructed by connecting intersecting contours on cross-sectional slices. This allows measurement of the total number of actin filaments and individual actin filament length and volume in a reproducible fashion. Focusing on the role of F-actin …

Microwave Imaging Technique For Breast Cancer Detection, Nure Alam Chowdhury

Theses and Dissertations

Breast cancer is a global problem, and it is inevitable to detect cancerous cells at early stages. In recent years, microwave imaging technology has been widely applied in biomedical applications for its non-ionizing radiation. In this study, we design a micro-strip patch antenna with an inverted T-type notch in the partial ground to detect tumor cells inside the human breast. The size of the current antenna is small enough (18 mm × 21 mm × 1.6 mm) to distribute around the breast phantom. The operating frequency has been observed from 6–14 GHz with a minimum return loss of −61.18 dB …