Engineering Commons^™

Using Discovery-Based Learning To Prove The Behavior Of An Autonomous Agent, David N. Mezera

Theses and Dissertations

Computer-generated autonomous agents in simulation often behave predictably and unrealistically. These characteristics make them easy to spot and exploit by human participants in the simulation, when we would prefer the behavior of the agent to be indistinguishable from human behavior. An improvement in behavior might be possible by enlarging the library of responses, giving the agent a richer assortment of tactics to employ during a combat scenario. Machine learning offers an exciting alternative to constructing additional responses by hand by instead allowing the system to improve its own performance with experience. This thesis presents NOSTRUM, a discovery-based learning DBL system …

Design And Construction Of The Aerobot Robotic Manipulator (Arm), William L. Cochran

Theses and Dissertations

This thesis designed, constructed, and tested a robotic arm for the Aerobot Aerial Robot. The main purpose of the ARM is to enable the Aerobot to retrieve objects for use in an annual robotics competition. Design of the ARM involved synthesizing the characteristics of simplicity, weight, strength, and size. The result was a three-degree-of-freedom manipulator that uses electric motors, cable linkages, and telescoping tubes to access a work space below the Aerobot. Forward and inverse kinematics were investigated to enable automation of the ARM. Data was collected from infrared sensors to validate the model. Manipulation of the ARM is presently …

Recognition Of Quadric Surfaces From Range Data: An Analytical Approach, Ivan X. D. D'Cunha

Electrical & Computer Engineering Theses & Dissertations

In this dissertation, a new technique based on analytic geometry for the recognition and description of three-dimensional quadric surfaces from range images is presented. Beginning with the explicit representation of quadrics, a set of ten coefficients are determined for various three-dimensional surfaces. For each quadric surface, a unique set of two-dimensional curves which serve as a feature set is obtained from the various angles at which the object is intersected with a plane. Based on a discriminant method, each of the curves is classified as a parabola, circle, ellipse, hyperbola, or a line. Each quadric surface is shown to be …

Matching Points To Lines: Sonar-Based Localization For The Psubot, Kevin Blythe Stanton

Dissertations and Theses

The PSUBOT (pronounced pea-es-you-bought) is an autonomous wheelchair robot for persons with certain disabilities. Its use of voice recognition and autonomous navigation enable it to carry out high level commands with little or no user assistance. We first describe the goals, constraints, and capabilities of the overall system including path planning and obstacle avoidance. We then focus on localization-the ability of the robot to locate itself in space. Odometry, a compass, and an algorithm which matches points to lines are each employed to accomplish this task. The matching algorithm (which matches "points" to "lines") is the main contribution to this …

Formant Estimation From Dctc's Using A Feedforward Neural Network, Shubhangi U. Kelkar

Electrical & Computer Engineering Theses & Dissertations

Formants are the natural frequencies of the human vocal tract. Existing methods for estimating formants from speech signals are computationally complex and subject to errors for certain type of speech sounds. This thesis describes a method for estimating vowel formant frequencies from Discrete Cosine Transform Coefficients (DCTC's), a form of cepstral coefficients, using a feedforward neural network with back-propagation training. Experimental results are based on a large multispeaker data base. The results are obtained for both a linear transformation and a feedforward neural network with a nonlinear hidden layer. In general, the neural network transformation is superior to the linear …

Hardware-Verification Through Logic Extraction, Michael A. Dukes

Theses and Dissertations

A Prolog-based system is described which employs logic-extraction to perform hardware-verification. The extraction rules are built automatically from hierarchical structural VHDL models, enabling the equivalence of a structural VHDL description and a layout specification to be verified. Pin-to-pin critical- path analysis is performed within the logic-extraction process; many noncritical paths are pruned early, making pin-to-pin critical path analysis of large circuits feasible. It is demonstrated that a design methodology based on logic extraction, VHDL, and a layout tool can provide a fabricated functionally- correct IC design without circuit-level or switch-level simulation. This methodology is shown to be practical for VLSI …

Robotic Tactile Sensors Fabricated From A Monolithic Silicon Integrated Circuit And A Piezoelectric Polyvinylidene Fluoride Thin Film, Craig S. Dyson

Theses and Dissertations

The purpose of this research effort was to design, fabricate, and test a tactile sensor system consisting of an external high impedance switch circuit, an external multiplexing circuit, and a tactile sensor IC. In order to accomplish this objective, a hardware design and selection process was implemented along with a logical test methodology. An external multiplexer circuit samples all of the array elements in 50 ms. The current prototype sensor has linearity spanning loads of 0.8 g to 135 g, a load resolution of 20 g, and a maximum bandwidth of 25 Hz. Using an elementary shape recognition algorithm the …

Kinematic Synthesis Of Deployable-Foldable Truss Structures Using Graph Theory, Dirk B. Warnaar

Mechanical & Aerospace Engineering Theses & Dissertations

A graph theoretic approach is applied to the conceptual design of deployable truss structures. The characteristics that relate to the inter-connectivity of the elements of a deployable truss structure can be captured in a schematic representation, called a graph. A procedure is presented that enables the exhaustive generation of these graphs for structures of any given number of nodes and links and which are foldable onto a plane or onto a line.

A special type of truss structures, called truss modules, is presented. Graphs of this class of structures form a subset of the graphs of truss structures. Two procedures …

Three Degrees Of Freedom Compliant Motion Control For Robotic Aircraft Refueling, Clayton M. Andersen

Theses and Dissertations

The Air Force Institute of Technology (AFIT) supports on-going research in application of robotic technology to enhance assembly tasks. As a testbed, AFIT supports the ground-based aerial refueling project, with an emphasis on visual servoing techniques and compliant motion control. This thesis focuses on compliant motion control. Previous research developed the testing environment, which includes a PUMA-560 industrial manipulator, and a half scale mock-up of an aerial refueling system. This effort corrected and expanded the existing two degree of freedom (DOF) compliant controller to three DOF. Three DOF compliance was demonstrated by inserting the refueling nozzle into the receiver port. …

Use Of Grasp Force Focus Positioning To Enhance The Torque Resistance Capability Of Robotic Grasps, Stephen G. Edwards

Theses and Dissertations

Three-point-contact grasps are unique in that the homogeneous solution for the contact forces always produces a grasp force focus. Careful positioning of this focus point in the grasp plane can help avoid two things; slipping at the contact points, and violation of joint torque limits. The focus placement method is explored theoretically by examining two types of grasps on cylinders; 1) fingertip grasps using three independently operated fingers, and 2) single-finger power grasps with one contact point on each of three links. Constraint maps are generated for various fingertip grasps in order to show how proper placement of the grasp …

An Artificial Neural Approach To The Decomposition Problem, Chandrashekar L. Masti

Electrical & Computer Engineering Theses & Dissertations

The goal of this thesis is to develop an artificial neural approach toward addressing the intractability involved with the decomposition problem. The search for the lattice of substitution property (s. p.) partitions essential to decompositions is cast into the framework of constraint satisfaction. An artificial neural network is developed to provide solutions by performing optimization of a mathematically derived objective function over the problem space. The issue of transitivity is verified to belong to a class of problems beyond the scope of solvability for conventional quadratic-order constraint satisfaction neural networks. A theorem is stated and proved establishing that third-order correlations …

Impacts Of Industrial Robotics: Potential Effects On Labor And Costs Within The Metalworking Industries, Steven M. Miller

Research Collection School Of Computing and Information Systems

According to leading expert opinion, industrial robots are among the most important innovations of recent decades. Yet there is very considerable uncertainty (and disagreement) as to the rate at which the use of robots will spread and what their effects on employment, costs, and market structure will be. As stressed in 1983 by Congress’s Office of Technology Assessment: “A central question for an analysis of the social and economic impacts of programmable automation is whether programmable automation is likely to spread especially rapidly among firms and industries, and why.” The author analyzes the job displacement effects of industrial robots, as …

Impact Of Automation On Process Control Decision-Making, Steven M. Miller, Susan R. Bereiter

Research Collection School Of Computing and Information Systems

This paper investigates changes in the process control of a vehicle assembly plant which had been modernized from a principally manual procedure to one that uses programmable automation extensively. Process control is defined as the information flow and decision-making required to perform basic process operations. We investigate the effects of implementing a computer-integrated production system on the amount and types of process control decision-making and on the distribution of process control decision-making between humans and machines. After automation, the emphasis on decisions regarding product quality specifications increased and the emphasis on decisions related to flexibility in handling a variety of …

Robotics And The Conservation Of Human Resources, Robert U. Ayres, Steven M. Miller

Research Collection School Of Computing and Information Systems

Due to rapid expansion in the field of robotics, policy issues have arisen in regard to developing human skills to deal with the new technology and to deal with the obsolescent human skills which are the inevitable result of this growth pattern. Industrialists, educators, union leaders, and government officials must work cooperatively to insure that the coming changes are made with minimum disruption. Improved training methods and courses have to be developed for the skills needed to control, manage and supervise the new machines. Some of the ways in which this can be accomplished are through offering financial incentives for …