Science and Mathematics Education Commons^™

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Building A Functional Cardiograph Over Four Semesters, Part 3: Estimating Heart Rate And Respiration Rate In The Time And Frequency Domains Using Matlab, Gail Baura, Francisca Fils-Aime, Vincent Chiun-Fan Chen, Leanne Kallemeyn

Engineering Science Faculty Publications

At Loyola University Chicago (LUC), all engineering courses are taught using a mandatory minimal lecture style, where the majority of course meeting time is devoted to group activities. Each activity may take place during that course meeting only, over the entire semester, or over multiple semesters. Curricular contextual threads take place over multiple semesters. One such contextual thread is the cardiograph project, whereby students build a functional cardiograph that estimates heart rate (HR) and respiration rate (RR) over four semesters (first, third, fifth, and sixth semesters). In Part III, students acquire their own electrocardiogram (ECG) using a custom motherboard, with …

Growing Capacity In Gifted And Talented Education Through Science, Technology, Engineering, Arts, And Mathematics (Steam), Sheron Mark, Chin-Wen Jean Lee, Peter A. Azmani

Kentucky Teacher Education Journal: The Journal of the Teacher Education Division of the Kentucky Council for Exceptional Children

A graduate-level gifted and talented education (GTE) course for in-service teachers was revised aiming to prepare teachers to integrate science, technology, engineering, arts, and mathematics (STEAM) education into existing curricula to create challenging learning experiences for students identified as gifted and talented. Two university-based teacher educators in science education and GTE, respectively, engaged in action research in order to develop and refine a semester-long STEAM project in the GTE course to accomplish this goal. In all, two elementary, one Music, and one World History teacher participated. Case study analysis explored the teachers’ approaches to developing STEAM-based lessons to expand their …

Making Makers: Tracing Stem Identity In Rural Communities, Jessie Nixon, Andy Stoiber, Erica Halverson, Michael Dando

Journal of Pre-College Engineering Education Research (J-PEER)

In this article, we describe efforts to reduce barriers of entry to pre-college engineering in a rural community by training local teens to become maker-mentors and staff a mobile makerspace in their community. We bring a communities of practice frame to our inquiry, focusing on inbound and peripheral learning and identity trajectories as a mechanism for representing the maker-mentor experience. Through a longitudinal case study, we traced the individual trajectories of five maker-mentors over two years. We found a collection of interrelated factors present in those students who maintained inbound trajectories and those who remained on the periphery. Our research …

Developing An Inquiry-Based Laboratory Project For Chem 142l Course At Bsu, Manuel Pina

Honors Program Theses and Projects

In addition to content knowledge, critical and independent thinking, scientific reasoning, and problem-solving skills are essential in preparing next generation of successful workforce. Since one of the biggest advantages of STEM disciplines is a “must-have” hands-on laboratory experience, it is intuitive to exploit this learning space to reinforce afore-mentioned skills. In this context, project-based (PBL) or inquiry-based (IBL) laboratory experiences are rapidly becoming mainstream pedagogical choice for many STEM instructors across United States.^[1-4] PBL, and IBL are learning experiences that offer students an opportunity to experience realistic scientific process of discovery through carefully designed inquiry-driven and/or open-ended investigative laboratory …

Stem Education In The Early Childhood Classroom, Julia Biagiotti

Honors Program Theses and Projects

This qualitative study focuses on the type of STEM education students are getting at the early childhood level (PK-2). Based on gaps found in literature, an interview protocol was created and six participants with various careers in the field of STEM education were interviewed. The research was concentrated on trying to determine what components of STEM education make it successful in the early childhood classroom. All of the interview responses were analyzed and coded and determined the results found below. A few integral parts of a successful STEM education seem to be curiosity, asking questions and a hands-on component, but …

Contributing To Engineering Colleges Students' Development Through Out-Of-Class Involvement: A Survey Of Chinese Private Colleges' Engineering Students, Wanlu Li

Education (PhD) Dissertations

The purpose of this study was to investigate the primary characteristics of engineering college students’ involvement in out-of-class activities (OA) at one private college in China through the use of the translated and culturally adapted Chinese version of the Postsecondary Student Engagement Survey (PosSES 2.1). This study provides the statistical analyses of the survey data completed by 283 senior engineering students on their perceptions about their levels of involvement related to positive/negative outcomes students perceive and affective engagement. Data results showed all levels of involvement have a significant influence on positive outcomes. Besides, active involvement degree, hours, and types of …

Students’ With Blindness And Visual Impairments Level Of Engagement In Science And Engineering Practices, Tiffany A. Wild, Natalie Shaheen, Danene K. Fast, Julia Averill, Karen Koehler, Kathleen Farrand

Journal of Science Education for Students with Disabilities

There is a lack of research on science-process skills and abilities of students with blindness and visual impairments to apply those skills (Jones, Forrester, Robertson, Gardner, & Taylor, 2012). This study aims to provide additional information on how students with blindness and visual impairment are engaged in science and engineering practices in order for teachers to gain a better understanding of how students with visual impairments can learn engineering practices. The Student Inquiry Review (Hilson & Wild, 2015) that examines the scientific and engineering practices as defined in the Framework for K-12 Science Education: Practices, Crosscutting Concepts and Core Ideas …

Early Engineering Experience (E3) Initiative, Danielle Nicole Carter, Rafael E. Landaeta

Engineering Management & Systems Engineering Faculty Publications

This Work in Progress paper details an initiative designed to broaden exposure and attract increased interest in the study of engineering of a minority-serving institution (MSI) with a plurality of races represented. The University's student population where this initiative is being implemented consists of 26.2% African American and 6% that identify with two or more races. In contrast, the College of Engineering in this University is 20% African American; the freshmen class makes up 6.3% of this figure. By USDOE standards, this characterization is indicative of a predominantly white institution (PWI). According to the Bureau of Labor Statics, underrepresented minorities …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Grit And Female Graduates’ Experiences In Engineering And Computer Science Programs, Jennifer Ilene Watson

Walden Dissertations and Doctoral Studies

Institutions have implemented recruitment and retention initiatives in science, technology, engineering, and mathematics (STEM) degree programs; however, gender disparity of women in engineering and computer science programs persists. The purpose of this qualitative phenomenological study was to explore the lived experiences of female graduates from engineering and computer science programs. The conceptual framework was the theory of grit to explore how female students sustained their passion and perseverance through obstacles and adverse situations. Data were gathered through semistructured interviews with 17 female participants who graduated from engineering and computer science programs in the United States. Data were analyzed through a …

Stem Opportunities - High School 2019, Huey-Xian Kelly Wong, Madeleine Rauhauser, Annie Morgan Nelson

Honors Program: Expanded Learning Clubs

This publication details the lesson plan for the “Opportunities in STEM” club for the summer of 2019. This club began out of a desire to educate high school students about the opportunities and careers available in the science, technology, engineering, and mathematics fields. Often, students feel that the prospect of entering a STEM field is daunting and out of their grasp. What it means to be a scientist is often unclear, and students never consider opportunities out of the fear of the unknown, particularly when science is associated with complexity and difficulty. This lesson plan integrates experiments with a wealth …

Law School News: Roger Williams University Announces 11th President 02-13-2019, Ed Fitzpatrick

Life of the Law School (1993- )

No abstract provided.

No Bones About It: How Digital Fabrication Changes Student Perceptions Of Their Role In The Classroom, Alexandria K. Hansen, Jasmine K. Mcbeath, Danielle B. Harlow

Journal of Pre-College Engineering Education Research (J-PEER)

This study used cultural historical activity theory to make meaning of a digital fabrication project situated in the complexity of a classroom. Using an ethnographic perspective, we observed 14 students (aged 13–14) in a middle school’s creative design and engineering class inspired by the Maker Movement. Working with the classroom teacher, a professional stuntman tasked students with fabricating a prosthetic bone for use as a movie prop using their understanding of science, technology, engineering, and mathematics. Teacher interviews and student focus groups revealed differences in perceptions between their science class and engineering class. Additionally, affordances and constraints of the 3D …

Board 57: Identifying And Disseminating Transformative Professional Development Of Stem Undergraduates Who Perform Outreach: Progress In Year 1, Michael Alley, Joanna K. Garner

Division of Research and Economic Development Faculty & Staff Publications

To teach STEM content to K-12 students and to recruit talented and diverse K-12 students into STEM, many outreach programs at universities in the United States rely on STEM undergraduates. While the design of such outreach typically focuses on the K-12 students who are taught or recruited, an important but often overlooked consideration is the effect of the outreach on the professional development of the STEM undergraduates themselves. This proposed EAGER project seeks to determine which outreach programs in the United States provided the most transformative professional development of the participating STEM undergraduates. This project then seeks to capture the …

Board 57: Identifying And Disseminating Transformative Professional Development Of Stem Undergraduates Who Perform Outreach: Progress In Year 1, Michael Alley, Joanna K. Garner

Center for Educational Partnerships Publications

To teach STEM content to K-12 students and to recruit talented and diverse K-12 students into STEM, many outreach programs at universities in the United States rely on STEM undergraduates. While the design of such outreach typically focuses on the K-12 students who are taught or recruited, an important but often overlooked consideration is the effect of the outreach on the professional development of the STEM undergraduates themselves. This proposed EAGER project seeks to determine which outreach programs in the United States provided the most transformative professional development of the participating STEM undergraduates. This project then seeks to capture the …

A Quasi-Experimental Study Of Middle Level Student Engineering Understanding Pre-And Post-Treatment, Emily Driessen

Theses and Dissertations--Science, Technology, Engineering, and Mathematics (STEM) Education

This qualitative quasi-experimental study analyzed middle-level students’ understanding of engineering before and after instruction. Students from four teachers were examined. Before and after instruction, all students completed the Draw an Engineer Test (DAET) and the Views of Nature of Engineering (VNOE) survey. Additionally, sixteen students (eight girls and eight boys) from each group (Treatment and Comparison) were interviewed before and after instruction. Findings revealed that after instruction (1) many students viewed engineers as makers/builders/workers (just as they did pre-instruction), however, the percentage of students who listed engineers as inventors, designers, and creators increased; (2) fewer students from both groups noted …

Modeling For Ecological Engineering, Lauren Simpson, Brooke A. Whitworth

Publications

In this classroom, high-school biology students learned how pine beetle outbreaks in North America have become some of the worst in a decade. To make sense of this phenomenon, students created iterative models with in-depth explanations over the course of the unit. These models were formative in developing students’ conceptual understanding of ecology and applying their knowledge to a real-world context. The models showed students the detrimental effects of the outbreaks and helped them wonder about efforts to manage them and preserve the forests. This allowed the teacher to connect their learning to an ecological engineering task. This task pushed …

Instilling An Entrepreneurial Mindset In A New Generation Of First-Year Engineering Students Through A Graphics Course Project, Lulu Sun, Leroy Long Iii

Publications

Each year, an increasing number of engineering start-up companies emerge in the U.S. and around the world. Innovation and entrepreneurship have never been so pronounced, especially in science, technology, engineering, and mathematics (STEM) fields. How can we train engineering students to be more entrepreneurially-minded so they are well-equipped to become global innovators? Engineering educators can use entrepreneurially-minded learning activities to help students develop an entrepreneurial mindset, which is a set of beliefs, attitudes, and behaviors. At a mid-sized Southeastern private institution, we used an open-ended team project and an end-of-semester poster competition within a freshman-level engineering graphics course to encourage …

The Future Is Now Science Club, Shane Stan

Honors Program: Expanded Learning Clubs

The Future is Now! What will our planet look like in 10, 20, 50, or even 100 years? Where will we live, what will we eat, how will we travel? Believe it or not, in the coming decades, many ideas that were once science fiction will come through to realization. With this, many of the discoveries and technologies making all of this happen are being developed right now as we go about our daily lives.

In this club, appropriately titled, The Future Is Now Science Club, students will be inspired to think larger about the present world they live in. …

Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy Long Iii, Trevion S. Henderson, Michael Steven Williams Dr,

Publications

Diverse people and perspectives are needed to spur innovation and tackle societal problems. A wealth of untapped intellectual and economic potential exists among historically underrepresented racial/ethnic groups – including Blacks and Latinos – who have not had equitable access to engineering and related STEM fields. For Blacks and Latinos who are accepted into engineering and related STEM fields, they face a number of barriers to their success which lead to low retention and graduation rates. In historically male-dominated fields such as engineering and related STEM disciplines, Black and Latino men have remained underrepresented at the student and faculty ranks. To …

Making Connections: Evaluation Of A Professional Development Program For Teachers Focused On Stem Integration, Judy Lambert, Carmen Cioc, Sorin Cioc, Dawn Sandt

Journal of STEM Teacher Education

This article reports on a 2-year evaluation of a STEM integration professional development (PD) program for 40 math, science, and special education teachers in Grades 5–9 from a large Midwestern public school district. The National Research Council’s framework for integrated STEM education (Honey, Pearson, & Schweingruber, 2014) was used to explain the goals, outcomes, nature and scope, and implementation of the program. Teachers were measured on their growth in STEM content knowledge, technology integration, teaching confidence, pedagogical beliefs, and impact of PD. Increases resulted in all these areas with statistically significant improvements in most of them, particularly in Year 2. …

Incivility As A Barrier To Embeddedness Among Engineering Students: Does Gender Matter?, Katelyn R. Reynoldson

Psychology Theses & Dissertations

To meet the current demand for engineers, research has focused on how to attract and retain qualified candidates in the field, especially those that are underrepresented (e.g., women; NSB, 2016). The present study investigates incivility and embeddedness, which have been found to be antecedents of retention in both the workplace (Cortina, Magley, Williams, & Langhout, 2001; Mitchell, Holtom, Lee, Sablynski, & Erez, 2001) and the collegiate setting (Caza & Cortina, 2007; Major et al., 2015). To extend previous research, both constructs were examined simultaneously among undergraduate engineering students. Undergraduate, first-year engineers completed an online survey indicating the extent to which …

Kentucky 4-H Minimizes Barriers To Stem Education, Rachel Elizabeth Noble

Online Theses and Dissertations

Science, Technology, Engineering, and Math (STEM) programs are a national priority. The increase in the number of jobs that require a STEM-minded workforce raises the demand for education systems and communities to focus on fostering the development of STEM competencies of students. American youth are not gaining the skills necessary to compete in the global workforce. This study investigates how Kentucky 4-H minimizes the barriers of accessing STEM programs for youth in grades 4-8. Barriers of accessing STEM programs investigated are: lack of funding and resources, time, professional development, integration across curriculum, and out-of-school experiences. 4-H is the largest youth …

Stem And The Local Economy: Do Regions Reap The Benefits Of A Stem-Educated Workforce?, Fran Stewart

Employment Research Newsletter

No abstract provided.

Infographic: Institutional Barriers To Black And Latino Male Collegians’ Success In Engineering And Related Stem Fields, Leroy L. Long Iii, William Wanyagah

Publications

Infographic was created to support the article Institutional Barriers to Black and Latino Male Collegian's Success in Engineering and Related Stem Fields, which can be read here:

Approaches To Integrating Engineering In Stem Units And Student Achievement Gains, Elizabeth A. Crotty, Selcen S. Guzey, Gillian H. Roehrig, Aran W. Glancy, Elizabeth A. Ring-Whalen, Tamara J. Moore

Journal of Pre-College Engineering Education Research (J-PEER)

This study examined different approaches to integrating engineering practices in science, technology, engineering, and mathematics (STEM) curriculum units. These various approaches were correlated with student outcomes on engineering assessment items. There are numerous reform documents in the USA and around the world that emphasize the need to incorporate engineering into science education. The authors of this study contend that different approaches to integrating engineering in STEM units correlate to larger student achievement gains in engineering, based on assessment items developed from the Framework for Quality K–12 Engineering Education (Moore, Glancy, Tank, Kersten, & Smith, 2014). The goal of this work …

Internet Of Things, John Ritz, Zane Knaack

STEMPS Faculty Publications

The internet has not only made information searching and instantaneous communications possible, it has also expanded the development of smart products that can be connected and controlled over the internet. Automobile manufacturers have used these devices during the past decade to make cars safer and assist drivers with updated information on vehicle operation. Today many more products can be operated and controlled from a smartphone or computer. Depending on your level of desired internet-connectedness, many home products are coming to the market with IoT connectivity. Much data is being collected and acted upon through databases. These developments should enable machines …

Implementing Elementary School Next Generation Science Standards, Kathy Kennedy

Walden Dissertations and Doctoral Studies

Implementation of the Next Generation Science Standards requires developing elementary teacher content and pedagogical content knowledge of science and engineering concepts. Teacher preparation for this undertaking appears inadequate with little known about how in-service Mid-Atlantic urban elementary science teachers approach this task. The purpose of this basic qualitative interview study was to explore the research questions related to perceived learning needs of 8 elementary science teachers and 5 of their administrators serving as instructional leaders. Strategies needed for professional growth to support learning and barriers that hamper it at both building and district levels were included. These questions were considered …

Impacts Of Effective Temperature On Sectional View Drawing Ability And Implications For Engineering And Technology Education Students, Petros J. Katsioloudis

STEMPS Faculty Publications

Temperature can influence thermal comfort, working performance, and social behavior. In a classroom that is slightly cool, an assumption can be made that learning could be affected in a negative way. Considering this, a quasi-experimental study was done to determine if a significant difference of effective temperature have an effect on students’: a) spatial visualization ability, as measured by the MCT and b) ability to sketch a sectional view drawing. While not statistically significant, the students who received treatment using warm water outperformed their peers who received treatment using cold and hot water temperatures, respectively.