Operations and Supply Chain Management Commons^™

Research On Logistic Management In Deltai Medical Company, Yan Hu

World Maritime University Dissertations

No abstract provided.

Dynamic Allocation Of Airline Check-In Counters: A Queueing Optimisation Approach, Mahmut Parlar, Sharafali Moosa

Research Collection Lee Kong Chian School Of Business

This paper was motivated by an observation in an international airport with regard to allocation of resources for check-in counters. In an exclusive check-in counter system, each flight has a dedicated number of counters that will be open until at least a half-hour before the scheduled departure of that flight. Currently, in many of the airports around the world, the decision to open or close check-in counters is done on an ad hoc basis by human schedulers. In doing so, the schedulers are almost always forced to perform a balancing act in meeting the quality of service stipulated by the …

Measuring Agility Of Organizations - A Comprehensive Agility Measurement Tool (Camt), Ameya S. Erande, Alok K. Verma

Engineering Technology Faculty Publications

Since "Agility" is ability to respond to unpredictable changes with quick response and profitability, it is not industry specific. This "not industry specific" nature of agility makes it hard to assess and measure it on a fixed scale. Measurement of agility of an enterprise has been a major topic of research since inception of agility in 1991. Though some methods have been developed to measure agility, they mainly remain tied to manufacturing industry. As agility is present in all the industries, comprehensive tool to measure it is a necessity in order to determine responsiveness of an enterprise to external turbulences. …

Research On Logistics Operation Mode Of Shanghai 2010 Expo, Jiaying Chen

World Maritime University Dissertations

No abstract provided.

Correlation Of Numerical Ability And Quality Technician Best Performers In Manufacturing Quality Control Applications, Charles Wesley Shelton

All-Inclusive List of Electronic Theses and Dissertations

The occupation of Quality Technician has many duties requiring numerical operations. Business and industry place considerable emphasis on numerical ability when evaluating the performance of a Quality Technician. In this study, the numerical ability and performance classification of Quality Technicians were analyzed using a correlation analysis. lll A single case study was used to investigate this relationship. A modified Delphi Method was used to determine characteristics of a Quality Technician. Quality Technicians were evaluated by their direct supervisor and completed a standardized numerical ability test. The evaluations by the supervisor were used to classify each technician based on their performance. …

Fisheries Research Contract Report No. 14 - Aquatic Animal Health Subprogram: Development Of A National Translocation Policy Using Abalone And Prawns As Templates For Other Aquatic Species (Frdc Project No. 2004/080) Final Report, Brian Jones, Fran Stephens

Fisheries Research Contract Reports

The use of scientifically based hazard identification, risk analysis and risk management is fundamental to managing unwanted effects. Hazards, such as quarantine incursions, will continue to occur despite the use of risk assessment methodologies but the frequency and severity of their occurrence will be reduced.

This was recognised by the Ministerial Council on Forestry, Fisheries and Aquaculture in 1999 when they published the "National policy for the translocation of live aquatic organisms".

This FRDC project provides a simple risk assessment methodology based on the Australian Standard for Risk Management (AS/NZS 4360: 2004) and one that is consistent with the Ministerial …

An Adaptive Tabu Search Heuristic For The Location Routing Pickup And Delivery Problem With Time Windows With A Theater Distribution Application, Robert E. Burks Jr.

Theses and Dissertations

The time constrained pickup and delivery problem (PDPTW) is a problem of finding a set of routes for a fleet of vehicles in order to satisfy a set of transportation requests. Each request represents a user-specified pickup and delivery location. The PDPTW may be used to model many problems in logistics and public transportation. The location routing problem (LRP) is an extension of the vehicle routing problem where the solution identifies the optimal location of the depots and provides the vehicle schedules and distribution routes. This dissertation seeks to blend the PDPTW and LRP areas of research and formulate a …

Modeling A Reparable Supply Chain And Applying Cpfr Concepts, Sandra A. Mayhall

Theses and Dissertations

The Air Force supply chain includes parts required to build, fix, or maintain aircraft delivered to the warfighter to carry out missions. Industry has shown that following Collaborative Planning, Forecasting, and Replenishment (CPFR) concepts, particularly reducing inventory through accurate demand forecasts, has increased profits in part by lowering the holding costs of inventory and increasing sales. This is analogous to the Air Force increasing aircraft availability. There is scant evidence that demand forecasts generated at any level in the Air Force are shared with the intent of coordinating replenishment. This thesis uses a simple discrete-event stochastic simulation model to show …

Understanding Innovation Adoption In The Air Force, Morgan J. Evans

Theses and Dissertations

Innovation adoption has become a critical issue for organizations in both the public and private sectors. The search for competitive advantage has led to the recognition that innovation is a vital ingredient for an organization's survival and profitability in this information age. The United States Air Force is seeking to adapt to this new information age by transforming its business processes in order to sustain its competitive advantage as the world's most respected air force. Adopting innovations and integrating new or improved technologies, capabilities, concepts, and processes into Air Force planning and acquisition activities, organizations, and operations are goals of …

Algebra Of Tankers, Margaret M. Romero

Theses and Dissertations

The Air Force's aerial refueling tanker aircraft provide essential support for deployment and employment of combat and combat support aircraft, by extending their endurance and enhancing fighting efficiency. As the lead command for air refuelers, Air Mobility Command (AMC) must frequently examine the capability of current and proposed tanker fleets to meet mission requirements due to limited tanker resources. Analysts in AMC primarily use the Combined Mating and Ranging Plans System to provide actual tanker/receiver aircraft schedules and flight plans that take into account numerous system constraints. However, this tool can take weeks to run. Even recently developed quick look …

Hazardous Material Cargo Frustration At Military Aerial Ports Of Embarkation, Niel E. Christensen

Theses and Dissertations

Since military units often require critical hazardous materials in an expedited manner, identifying choke points within the supply chain is necessary to improve logistic support to front line forces. Hazardous materials are some of the most critical assets for the war fighter, as well as the most restrictive and often most time consuming for transportation. This research quantifies the extent that vendor and depot supplied cargo is being delayed at Aerial Ports of Embarkation. By looking at frustrated hazardous material at Charleston Air Force Base, South Carolina and Dover Air Force Base, Delaware, a case study methodology is used to …

Improving Maintenance Data Collection Via Point-Of-Maintenance (Pomx) Implementation, William D. Cone

Theses and Dissertations

Maintenance data collection is an integral part of flightline aircraft maintenance. Historically, this data was input via traditional keyboard data entry methods at a computer terminal. These terminals are typically located in the aircraft maintenance unit (AMU) facility, away from where the actual maintenance is being performed. In contrast to the traditional approach, the Point-of-Maintenance system (POMX) seeks to reduce the data entry burden while increasing data accuracy through the use of E-Tools such as ruggedized laptop computers and handheld portable maintenance aids (PMAs). POMX enables data entry at the aircraft or other maintenance location via wireless local area network …

Rfid Technology Use In Assembly And Disassembly Processes, Gordana Ostojić, Milovan Lazarević, Vukica Jovanović, Stevan Stankovski, Ilija Ćosić

Engineering Technology Faculty Publications

Modern production conditions demand the application of the concept of distributed production. Today companies are specialized for partial technology processes. Hundreds, sometimes even thousands, of collaborative processes depend on workers’ interaction and communication in product assembly and disassembly phases. RFID technologies can be really helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper we presented VCDE system architecture and the realization method of RFID technology as well as the data acquisition using RFID technology during the product lifecycle from the design process, production, assembly, usage, and an special example is given regard- …

Using Rfid Technology In Collaborative Design Of The Assembly Systems, Stevan Stankovski, Gordana Ostojić, Vukica Jovanović, Branislav Stevanov

Engineering Technology Faculty Publications

Modern production conditions require the application of the concept of distributing production. This approach means coordinative production in a number of small and middle size companies. Multiplex products, consisting of a number of parts, components, and modules are assembled in one function unit in one company, but they may not be manufactured in one place. Huge factory and production complex, which existed in our country, comprised all phases of product lifecycle, from the development of a concept solution to the assembly. Technology of product manufacturing, resource logistics, quality control, product testing and verification of product function characteristics all represented activities …

Conceptual Simulation Modeling For Regional Distribution Center Systems, Kitti Setavoraphan

All-Inclusive List of Electronic Theses and Dissertations

This study focuses on the simulation modeling of warehousing operations commonly seen at general merchandize distribution centers. The key operational processes and modeling requirements related were identified and analyzed through a pattern and knowledge-based approach to capture the structural and behavioral characteristics of general distribution centers to support simulation study for performance evaluation and process improvement. Robust representations and patterns were developed to represent the elements and logic of the simulation models for these processes to facilitate efficient and effective construction of models. The issues of conceptual modeling such as synthesis, abstraction, decomposition, and specialization were addressed.

A Case Study On Implementation Of Quality Function Deployment Into The Design Process Of A Small Job Shop, Benjamin A. Thomson

All-Inclusive List of Electronic Theses and Dissertations

The majority of research involving Quality Function Deployment (QFD) was focused on large consumer based companies and not small job shop business-to-business companies. This case study involved the implementation of QFD into the design process at Reynolds & Co., a small job shop in Terre Haute, IN. The specific objectives of the research were to find the QFD concepts that apply to the improvement of Reynolds & Co.'s (small job shop) design process. The next objective was to reduce the average design time associated with Reynolds & Co.'s design process. The final objective of this case study was to reduce …

Air Force Jp-8 Fuel Distribution System: A Statistical Analysis To Determine Where And When To Sample, Eric J. Heath

Theses and Dissertations

The Air Force Petroleum Office at Wright-Patterson Air Force Base, Ohio collects JP-8 sampling data, but this data doesn't undergo analysis to determine the health of the base-level JP-8 fuel distribution system. Commanders possess no known confidence level when assessing base-level fuel health. Therefore, the objective of this research is to assess Air Force base-level fuel sampling data to determine the base-level sampling point that ensures a quality and healthy product at the aircraft. Also, this research seeks to identify how often correlation sampling should take place. Sample test pass rates are analyzed from three locations, receipt, storage, and vehicles/aircraft, …

Optimization Model For Base-Level Delivery Routes And Crew Scheduling, Young-Ho Cha

Theses and Dissertations

In the U.S. Air Force, a Logistic Readiness Squadron (LRS) provides material management, distribution, and oversight of contingency operations. Dispatchers in the LRS must quickly prepare schedules that meet the needs of their customers while dealing with real-world constraints, such as time windows, delivery priorities, and intermittent recurring missions. Currently, LRS vehicle operation elements are faced with a shortage of manpower and lack an efficient scheduling algorithm and tool. The purpose of this research is to enhance the dispatchers' capability to handle flexible situations and produce "good" schedules within current manpower restrictions. In this research, a new scheduling model and …

Logistics Network Design With Differentiated Delivery Lead Time: A Chemical Industry Case Study, Michelle Lee Fong Cheong, Rohit Bhatnagar, Stephen C. Graves

Research Collection School Of Computing and Information Systems

Most logistics network design models assume exogenous customer demand that is independent of the service time or level. This paper examines the benefits of segmenting demand according to lead-time sensitivity of customers. To capture lead-time sensitivity in the network design model, we use a facility grouping method to ensure that the different demand classes are satisfied on time. In addition, we perform a series of computational experiments to develop a set of managerial insights for the network design decision making process.

Hybrid Stochastic Models For Remaining Lifetime Prognosis, Steven M. Cox

Theses and Dissertations

The United States Air Force is developing its next generation aircraft and is seeking to reduce the risk of catastrophic failures, maintenance activities, and the logistics footprint while improving its sortie generation rate through a process called autonomic logistics. Vital to the successful implementation of this process is remaining lifetime prognosis of critical aircraft components. Complicating this problem is the absence of failure time information; however, sensors located on the aircraft are providing degradation measures. This research has provided a method to address at least a portion of this problem by uniting analytical lifetime distribution models with environment and/or degradation …

Purchasing And Supply Chain Management Costing: An Air Transport Perspective Derived Through Commercial Air Cargo Firms, Kurt Ettrich

Theses and Dissertations

The Air Force has struggled to completely understand the costs associated with its operations. The issue of understanding cost is complex, involving many perspectives, methods and techniques. When examined from a broad standpoint, total supply chain costs can include a firm's costs plus upstream and downstream costs. This perspective takes vendors, suppliers and end customers into consideration. From this broad standpoint, the Air Force does not know its total supply chain cost. Since the Air Force's supply chain is too broad to be a focus of this study, a smaller segment was chosen for a closer look. Specifically, air cargo …

Prepositioned Trailers For Aircraft Battle Damage Support, Scott M. Murray

Theses and Dissertations

Air superiority is essential in today's wartime environment. Aircraft that are damaged and not returned to combat can have a considerable impact on the quest for dominance in the air. To maintain operational effectiveness, an organization must have the capability to quickly repair damaged aircraft. The purpose of an Aircraft Battle Damage Repair (ABDR) program is to rapidly and effectively repair damaged aircraft to fly additional operational sorties and further contribute to wartime objectives. This capability must consist of providing the necessary tools and equipment for the rapid repair of aircraft. When an ABDR team deploys in support of an …

A Simulation-Based Analysis Of The Impact Of In-Sourcing A Major Process Element On The Coast Guard Hh-601 Depot Maintenance Process, Steven E. Vigus

Theses and Dissertations

Leaders at the United States Coast Guard's Aircraft Repair and Service Center (ARSC) in Elizabeth City, North Carolina recently formalized their planning and analysis functions by adding a dedicated branch to their command structure. The Planning and Analysis Branch intends to apply computer modeling and simulation to study the impact of process changes to the various Programmed Depot Maintenance (PDM) lines. This research considers the applicability of this type of modeling and simulation, using ARENA to study the current HH-6OJ PDM process. The contribution of this research is a methodology specific to ARSC needs, an analysis of methodology based on …

A Service Life Analysis Of Coast Guard C-130 Aircraft, Jonathan B. Duff

Theses and Dissertations

The U. S. Coast Guard, much like the rest of the Armed Services, is facing a dramatic transformation of its forces to meet current and future service requirements. The Coast Guard has responded to this transformation by initiating the Deepwater System, a complete review of the offshore mission requirements and the modernization of its infrastructure. In particular, Deepwater will review and modernize the Coast Guard's aviation assets, improving aircraft systems, airborne sensors, and communications and information management systems. However, these capability advancements will take time and money to implement, and will require careful management of the current resources to ensure …

Trends. Thinking On Transportation Security, Ibpp Editor

International Bulletin of Political Psychology

This Trends article discusses the necessity of gathering intelligence successfully to combat terrorism as it pertains to commerce.

The Development Of An Enterprise Supply Chain Model For Naval Warship Construction, Rex A. Wallen

Computational Modeling & Simulation Engineering Theses & Dissertations

The utilization of computer simulation in the shipbuilding industry is not a new concept and many shipyards in the US and around the world are using simulation tools in a variety of ways with various levels of success. In other industries, computer simulation has proven itself as a powerful tool for reducing non-value added activities and promises to become more prominent in its use as a resource management tool. Its use in the manufacturing of outfitting components in the construction of Naval warships has had limited success due mainly to the inherent nature of ship construction, especially shipyards engaged in …

Comparative Analysis Of Leasing Versus Buying General Purpose Vehicles (Sedan) In The Korean Air Force, Jung J. Kim

Theses and Dissertations

Elmendorf Air Force Base (AFB) is one of the two key ERS airfields for the Pacific Theater. The condition of en route airfields has recently come to the attention of the DoD and the GAO. Delays at these airfields may cause personnel and equipment to arrive late in theater. Fuel systems at Elmendorf AFB are currently being improved, but the GAO questions whether these improvements will help the throughput. As well as being an en route airfield, Elmendorf is also an important Interim Brigade Combat Team (IBCT) APOE for Fort Richardson. The IBCT is designed to operate in small-scale contingency …

Use Of Critical Chain Scheduling To Increase Aircraft Availability, Daniel D. Mattioda

Theses and Dissertations

This study addresses the operation and support cost differences between the TUAF C-130E & C-130B, and the USAF C-130J aircraft. The TUAF C-130s have been being used for more than 30 years and changing world situations give armed forces different roles, and Turkey participates in all peacekeeping missions that are assigned by NATO (North Atlantic Treaty Organization) and the United Nations. While performing these roles, the importance of air mobility and the importance of reliability became widely appreciated. Moreover, the coming retiring age of the existing C-130s in the TUAF forced the TUAF to look for ways to improve its …

The Quality Problem Solving Method And Its Effectiveness At Nortech Inc., Jeffrey Henderson

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

An Analytical Hierarchy Process (Ahp) Assessment Of The Iso 14001-Based Environmental Management System In The Oil And Gas Industry In Malaysia, Vijayalakshmi Benjamin Samuel

Student Works (2000-2009)

Today's business world is changing due to the ever-increasing consciousness for environmental protection and sustainable development. Customers are taking into account environmental considerations in their supplier selection, and are increasingly buying products with identifiable environmental attributes. In this study, the critical decision criteria, sub-criteria and benefits of the adoption and implementation of the ISO 14001-based environmental management system (EMS) in the Malaysian oil and gas sector were studied using the analytical hierarchy process (AHP) approach. An empirical study was performed to investigate the relative weights and priorities of these criteria and benefits. An AHP decision model of EMS adoption was …