Construction Engineering Commons^™

Adoption Of Green Building Guidelines In Usa, India, And China, Matt Syal, Yunhui Yang, Gayatri Kumar, Jawanda Jackson

The Professional Constructor

Green Building Guidelines (GBGs) have played a major role in the global efforts to develop environmentally responsible buildings and infrastructure. These guidelines serve as ratings tools to evaluate sustainable practices used in buildings’ design, construction, and operations. Although, the acceptance of these guidelines has begun to increase globally, only a few countries have seen their widespread adoption. The acceptance of GBGs is dependent upon various factors specific to the country and society in which they exist. USA, India, and China were selected to be the focus of this study since each of these countries present a unique set of societal …

Characterizing Equipment Cost, Fuel Use, And Emissions For Earthwork Activities, Phil Lewis, Yongwei Shan, Apif Hajji, Elizabeth Hazzard

The Professional Constructor

The objective of this paper is to examine the relationships between construction equipment costs, fuel use, and air pollutant emissions to make more informed decisions in construction planning and achieve more sustainable construction activity. This paper presents an estimating approach that combines both construction and environmental data to assess the relationships between equipment costs, fuel use, and emissions. To characterize these relationships, a case study is presented for a dozer performing a bulk excavation activity. Sensitivity analyses based on soil type, dozing distance, and engine horsepower rating are presented. Results indicate that there is little difference in the equipment total …

General Interest Articles, American Institute Of Constructors

The Professional Constructor

No abstract provided.

Assessing The Economic, Energy, And Environmental Impacts Of A Bridge Replacement Project, Elizabeth Hazzard, Phil Lewis

The Professional Constructor

As the nation moves toward more sustainable energy and environmental standards, it is important to examine all sources of fuel consumption and pollution, including heavy-duty diesel (HDD) construction equipment. In order to quantify these sources at the project level, they must be identified with their respective activities. A case study was performed on an Oklahoma Department of Transportation (ODOT) bridge replacement project in order to establish a baseline estimate of real-world equipment activity, fuel use, and emissions data. These data were collected on a daily basis via jobsite visits and included specific information such as the equipment’s model year, engine …

In Memory Of Fran Dugan, American Institute Of Constructors

The Professional Constructor

No abstract provided.

Analysis Of Green Building Initiatives On U.S. University Campuse, Dennis C. Bausman, Ben Mueller

The Professional Constructor

As population expands and resource consumption grows, interest in sustainable practices continues to intensify. Universities and colleges in the U.S. have been leading the trend toward building certification and green initiatives to reduce energy consumption, lower water consumption, and recycle solid waste. This study investigates the extent to which green practices are implemented on new construction and the renovation of existing building stock on university campuses across the United States. The study also examines the financial analysis techniques institutions use to assess and prioritize green initiatives on new and existing facilities. The population selected for this study was two hundred …

Full Issue, Volume 39, Number 1

The Professional Constructor

No abstract provided.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Air Change Rate Vs Airflow Pathway: Bioaerosol Containment And Removal In Patient Rooms, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Recent studies have shown that higher air change rates may have the unintended consequence of creating turbulent airflows that entrain high concentrations of infectious particles within the breathing zone, and possibly, breakdown pressure relationships necessary to contain the spread of infectious particles to other clinical spaces.

Bs News January/February

Building Services Engineering

No abstract provided.

Ventilation Rates And Airflow Pathways In Patient Rooms: A Case Study Of Bioaerosol Containment And Removal, Ehsan S. Mousavi, Kevin R. Grosskopf

Durham School of Architectural Engineering and Construction: Faculty Publications

Most studies on the transmission of infectious airborne disease have focused on patient room air changes per hour (ACH) and how ACH provides pathogen dilution and removal. The logical but mostly unproven premise is that greater air change rates reduce the concentration of infectious particles and thus, the probability of airborne disease transmission. Recently, a growing body of research suggests pathways between pathogenic source (patient) and control (exhaust) may be the dominant environmental factor. While increases in airborne disease transmission have been associated with ventilation rates below 2 ACH, comparatively less data are available to quantify the benefits of higher …

Adaptive Predictive Functional Controller, Fadi Alsaleem, Arvind Rao

Durham School of Architectural Engineering and Construction: Faculty Publications

A controller device and a method for controlling a system that utilizes an adaptive mechanism to self-learn the system char acteristics and incorporates this adaptive self-learning ability to predict a control parameter correctly to provide precise control of a system component.

An Adaptive Photovoltaic Topology To Overcome Shading Effect In Pv Systems, Mohamed Amer Chaaban, Lana El Chaar, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Shading in photovoltaic systems can cause many undesired effects.When shading occurs, the power generated from the PV system is much less than nominal power, increasing the electrical mismatching losses between PV system components. Active research to address this power loss focuses on static and adaptive systems.This paper addresses an adaptive system solution and proposes a new method to adaptively overcome losses due to shading during low radiation conditions. In addition, a statistical analysis for choosing the most feasible and efficient configuration for the system size is presented. The proposed system has been validated under shade conditions in a simulation and …

Building Envelope And Interior Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A difference module determines differences between an out door ambient temperature and an indoor temperature, deter mines a first average of the differences, and determines a second average of the differences. A storing module stores a first data point, the first data point including the first average and a first total run time of a heating, ventilation, and/or air conditioning (HVAC) system, and stores a second data point, the second data point including the second average and a second total run time of the HVAC system. A fitting module fits a line to the first and second data points. An …

A Review Of Approaches For Sensing, Understanding, And Improving Occupancy-Related Energy-Use Behaviors In Commercial Buildings, Hamed Nabizadeh Rafsanjani, Changbum R. Ahn, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

Buildings currently account for 30–40 percent of total global energy consumption. In particular, commercial buildings are responsible for about 12 percent of global energy use and 21 percent of the United States’ energy use, and the energy demand of this sector continues to grow faster than other sectors. This increasing rate therefore raises a critical concern about improving the energy performance of commercial buildings. Recently, researchers have investigated ways in which understanding and improving occupants’ energy-consuming behaviors could function as a cost-effective approach to decreasing commercial buildings’ energy demands. The objective of this paper is to present a detailed, up-to-date …

Use Of Fiber-Reinforced Cements In Masonry Construction And Structural Rehabilitation, Ece Erdogmus

Durham School of Architectural Engineering and Construction: Faculty Publications

The use of fiber reinforcement in traditional concrete mixes has been extensively studied and has been slowly finding its regular use in practice. In contrast, opportunities for the use of fibers in masonry applications and structural rehabilitation projects (masonry and concrete structures) have not been as deeply investigated, where the base matrix may be a weaker cementitious mixture. This paper will summarize the findings of the author’s research over the past 10 years in these particular applications of fiber reinforced cements (FRC). For masonry, considering both mortar and mortar-unit bond characteristics, a 0.5% volume fraction of micro fibers in type …

Failure Modes For I-Section Gfrp Beams, Mamadou Konate, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents calculations for the failure modes for I-section Glass Fiber Reinforced Polymer (GFRP) beams with single mid-span web brace. Theoretical predictions are made using ASCE-LFRD Pre-Standard for FRP structures. For the member length considered, it is found that for small and medium I-sections the failure mode is governed by lateral-torsional buckling and for bigger I-sections the failure mode is governed by material rupture. The outcome of the predicted lateral-torsional buckling mode is compared with that observed experimentally.

Bs News November/December

Building Services Engineering

No abstract provided.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Bs News September/October

Building Services Engineering

No abstract provided.

Coastal Defenses, U.S., Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of U.S. military coastal defenses during the period up to and including the War 1812.

Bs News July/August

Building Services Engineering

No abstract provided.

Cooperative Construction In Schools In California, John Mauck Donley

Master's Theses

Cooperative Construction in Schools in California

John M. Donley

The construction industry has lost efficiency since 1964, while becoming increasingly more litigious. Schools in California can ill afford the time to allow the construction industry time to fully evolve. It may take years or decades to fully improve the efficiency of, and reduce the conflict within the construction industry.

At the same time, the construction industry has developed new processes to improve efficiency and reduce conflict. These processes are beginning to be broadly embraced by the industry. They all contain cooperative elements. Taken together they represent a new organizing principle …

Multi-Criteria Decision Modeling For Best Value Selections In Target Value Design Integrated Project Delivery, Brent Patrick Griffis

Master's Theses

Integrated Project Delivery (IPD) combined with Target Value Design (TVD) is a better way to deliver value for the client than traditional guaranteed maximum price (GMP) methods. With traditional GMP delivery methods, the interests of the parties are often at odds. The goal of IPD is to align all party interests in order to achieve a win-win scenario. Due to the aligning nature of IPD and the fact that each party’s success is dependent on achieving the project objectives as a whole; a non-biased, transparent, decision-making process is necessary in order to deliver the project objectives within the constraints of …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Bs News May/June

Building Services Engineering

No abstract provided.

Bs News March/April

Building Services Engineering

No abstract provided.

Method And System For Optimal Coordination Control And Soft Repair Of Multiple Rooftop Heating And Cooling Units, Haorong Li

Durham School of Architectural Engineering and Construction: Faculty Publications

Techniques are described that may be implemented in an adaptive control device to regulate multiple zone environmental units based upon multiple temperature values and multiple airflow values, where each temperature value and each airflow value is related to the temperature and the airflow in a specific zone. In an implementation, the input interface of the adaptive control device is configured to receive multiple temperature values and multiple air flow values from multiple zone sensors. The adaptive control device may calculate multiple operational values based on the multiple temperature values and the multiple air flow values. An operational value indicates a …

Improving Enrollment In The Construction Management Graduate Program Through Students’ Perspectives, Mouloud Messaoudi

Master of Technology Management Plan II Graduate Projects

Low enrollment and the decrease in graduation and retention rates are challenges facing the growth of the Master’s in Technology Management – Construction Management (MTM-CM) program at BGSU. In addition, the competition between the universities to enroll and retain more in-state, out-of-state, and international students is aggressive. There is a need for a revaluation for the MTM-CM program in order to attract more students in the future. This study is a necessary step to know what the MTM-CM students think about the product delivered to them at BGSU. There was no prior study investigating the satisfaction level of the construction …

The Influence Of National Culture On Effectiveness Of Safety Trainings During Postdisaster Reconstruction, Behzad Esmaeili, Kevin Grosskopf, Amy Javernick-Will

Durham School of Architectural Engineering and Construction: Faculty Publications

Non-English speaking workers constitute a disproportionately high number of workers involved in postdisaster reconstruction. Additionally, the rate of fatality among these workers is higher than the industry average. Research shows this population is more prone to unsafe behaviors in the working environment, conceivably because many of these workers are sent into the field prior to any formalized training. Recent studies show that the native culture of construction workers can impact risk-taking behavior. While numerous researchers have attempted to develop training materials for Hispanic workers, the number of studies that consider the impact of native culture on safety behavior is minimal. …