Construction Engineering Commons^™

Cognitive Radio For Smart Grid With Security Considerations, Khaled Shuaib, Ezedin Barka, Nedaa Al Hussien, Mohammed Abdel-Hafez, Mahmoud Alahmad

Durham School of Architectural Engineering and Construction: Faculty Publications

In this paper, we investigate how Cognitive Radio as a means of communication can be utilized to serve a smart grid deployment end to end, from a home area network to power generation. We show how Cognitive Radio can be mapped to integrate the possible different communication networks within a smart grid large scale deployment. In addition, various applications in smart grid are defined and discussed showing how Cognitive Radio can be used to fulfill their communication requirements. Moreover, information security issues pertained to the use of Cognitive Radio in a smart grid environment at different levels and layers are …

A Prediction Method For Overall Economic Value Of Fault Detection And Diagnostic Tools For Rooftop And Split Systems, David Yuill, James Braun

Durham School of Architectural Engineering and Construction: Faculty Publications

Fault detection and diagnostics (FDD) tools for air-conditioning application may perform well or poorly, but it is difficult to characterize this performance in a meaningful way. Some recently proposed evaluation techniques have provided various statistics to characterize FDD performance, but these results can be difficult for a potential adopter of FDD to understand. A new method of characterizing FDD performance by predicting the overall economic value of the FDD tool is proposed in this paper. It is applicable to FDD tools intended for air-cooled unitary airconditioners, such as rooftop units (RTU) and split systems. The method gives an estimated dollar …

Lateral-Torsional Buckling Of Frp I-Section Beams, Mojtaba B. Sirjani, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of an experimental and theoretical investigation into the load-carrying capacity of Fiber Reinforced Polymer (FRP) I-section beams subjected to four-point loading. The overall lateral-torsional buckling, web and flange local buckling as well as material rupture load estimates are also made using the American Society of Civil Engineers Load and Resistance Factor Design (ASCE-LRFD) Pre-Standard for FRP Structures. Lateral-torsional buckling failure mode is found to govern for each of the beams studied. The study also revealed that the height of applied loads relative to the shear center has a very significant influence on lateral-torsional buckling load …

Elasto-Plastic Transient Dynamic Response Of Tubular Section Steel Cantilever Beam Under Impact Loading, Alial Aloosi, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of an experimental and theoretical investigation into the loadcarrying capacity of Fiber Reinforced Polymer (FRP) I-section beams subjected to four-point loading. The overall lateral-torsional buckling, web and flange local buckling as well as material rupture load estimates are also made using the American Society of Civil Engineers#x2019; Load and Resistance Factor Design (ASCELRFD) Pre-Standard for FRP Structures. Lateral-torsional buckling failure mode is found to govern for each of the beams studied. The study also revealed that the height of applied loads relative to the shear center has a very significant influence on lateral-torsional buckling load …

Normalized Effect Of Condenser Fouling And Refrigerant Charge On Performance Of Vapor Compression Air Conditioning Systems, Mehdi Mehrabi, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

Several laboratory experiments have studied the effect of faults on vapor compression cycle air-conditioning systems. There has been a particular focus on refrigerant charge variation, which is believed to be quite common in air conditioners, and a lesser focus on heat exchanger fouling. The majority of the published results evaluate the fault effects on particular system operating parameters in one unit. For example, the effect on capacity and efficiency are typically evaluated. The results differ from one study to the next. The current paper summarizes the effects for all of the results available in the literature for condenser fouling and …

Student Absenteeism And The Comparisons Of Two Sampling Procedures For Culturable Bioaerosol Measurement In Classrooms With And Without Upper Room Ultraviolet Germicidal Irradiation Devices, Chunxiao Su, Josephine Lau, Shawn G. Gibbs

Durham School of Architectural Engineering and Construction: Faculty Publications

Upper room ultraviolet germicidal irradiance (UVGI) has been shown to reduce the concentration of bioaerosols in controlled chambers. However, there is a lack of experimental results on the reduction of bioaerosol concentrations by UVGI devices in actual uncontrolled buildings. This study was carried out in an American elementary school in the Midwest. Two sampling procedures were carried out in six selected classrooms with similar dimensions that were separated into two groups: (1) UVGI exposure group and (2) non-UVGI control group. Two-stage Tisch culturable impactors were utilized to collect airborne culturable bacteria and fungi. Monthly samples were collected during unoccupied period …

Fault Detection And Diagnosis Process For Oversizing Design On Multiple Packaged Air-Conditioning Units, Denchai Woradechjumroen, Haorong Li, Thanapat Promwattanapakee

Durham School of Architectural Engineering and Construction: Faculty Publications

Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open …

Compressor Having A Control And Dagnostic Module, Hung M. Pham, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An apparatus includes a Voltage sensor, a current sensor, and a controller. The Voltage sensor measures Voltage values of alternating current power Supplied to a capacitor. The capaci tor is electrically coupled to a compressor. The current sensor measures current values of the alternating current power. The controller is configured to receive the Voltage values and the current values. The controller is configured to determine a first power factor value based on at least one of the voltage values and at least one of the current values. The controller is configured to selectively detect a first capacitor fault in response …

Bs News January/February

Building Services Engineering

No abstract provided.

Exploring Emerging Technologies For The Built Environment Circa 2015 For Use In Architectural Engineering And Related Majors, Connor J. Hanlon

Architectural Engineering

For this senior project I am seeking to combine my knowledge of Structural Engineering with Construction Management. For this task, I have decided to look at Building Information Modeling (BIM). In this project I investigate the BIM tools Trimble Tekla Structures and Autodesk Navis- works Manage. Tekla is a modeling, fabrication, and design program. Navisworks is a visualiza- tion and Clash Detection tool. For this project I have identiÅied two main goals relating to Navis- works and Tekla:

1. Create content to allow students and professors learn how to use Tekla and Navisworks

2. Determine the capabilities of these softwares, and Åigure …

   ---

   Go to article

"Defining Job Titles And Career Paths In Bim", Malachy Mathews

Conference papers

Ireland is undergoing a digital transformation. Some industries particularly in the areas of travel and retail have been radically transformed. However many industries are facing their biggest challenge in their existence already weakened by the economic crisis and constrained by their legacy business, it will be difficult for them to adapt and embrace the new rules dictated by digital change. Irelands design and construction industry is on the cusp of a digital transformation with early adopters now deriving some benefits from a move to a building information modeling (BIM) process. Digital transformation cannot happen unless there are personnel with the …

Bs News November/December

Building Services Engineering

No abstract provided.

Seeps And Springs At A Platteville “Observatory” On The River Bluffs, Bj Bonin, Greg Brick, Julia R. Steenberg

Sinkhole Conference 2015

Residential building construction along the Mississippi River bluffs in the 1970s created a unique enclosed outcrop of the Late Ordovician Platteville Formation at Lilydale, Minnesota. This outcrop was examined in early 2013 after a newly-formed spring flooded an elevator shaft the previous year, drawing attention to the foundation conditions. The Lexington Riverside property is a six story condominium complex constructed within the top of the bluff. A two-level underground parking garage was built into the bluff. Bedrock was mechanically excavated to accommodate the construction of the building, creating an unweathered rock surface. The space between the structure and the excavated …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

The Professional Constructor, Full Issue, Volume 39, Number 02

The Professional Constructor

No abstract provided.

Bs News September/October

Building Services Engineering

No abstract provided.

Project Delivery Methods For The Construction Of Public Schools In The Southeastern United States, Dennis C. Bausman

The Professional Constructor

Construction of new facilities is a risky enterprise due to the situational aspects of the project, multiple parties involved in the process, timing and budget constraints, and the design features and quality levels required by the owner. Decision makers are charged with selecting a project delivery system to successfully manage the design and construction process in order to meet the owner’s needs. This paper documents the delivery methods utilized for the construction of public schools in Florida, Georgia, North Carolina, and South Carolina from 2006 to 2012 and provides insight into the reasons for the delivery method selections made by …

Construction Degree Graduates: An Evaluation Of Depth Of Skill Understanding And Skill Priority By Construction Industry Professionals, Ben F. Bigelow, Edelmiro Escamilla, Lauren Kuecker

The Professional Constructor

Previous studies have been conducted to determine the skills the construction industry expects graduates and entry level professionals to possess. The majority of those studies report soft skills and technical expertise as the main qualities graduates should have upon entering the industry. Many differing skills have been reported, but neither the expected depth of understanding in those skills nor the industry’s priority of those skills have been explored. To do so, a survey was administered to members of the Construction Industry Advisory Council at Texas A&M University asking these questions. Depth of understanding was evaluated on a four level basis …

Accident Patterns In Road Construction Work Zones, Tariq Shehab, Leah Phu

The Professional Constructor

Traffic safety in road construction zones has always been a major concern for engineering practitioners, departments of transportation, law enforcement professionals, researchers and many others. Due to the deteriorated condition of road and underground infrastructure facilities in the United States, the number of rehabilitation projects and their associated traffic accidents have increased over the past few years. To perform the needed road and underground utility rehabilitation activities in safer environments, researchers need to understand the causes behind these accidents. Although many researchers have been exploring the safety of many construction activities, research pertaining to road construction projects is lacking and …

Reviewer Thank You, Jason Lucas

The Professional Constructor

No abstract provided.

A Framework For Small-Scale Construction Projects By Ngos In Developing Countries, James D. Goedert, Bradley Cory

The Professional Constructor

This paper outlines a theoretical framework for NGOs who are building small-scale construction projects in developing countries. The framework is a step-by-step procedure to guide NGOs from developing project parameters at the start of the project with the partner to a locally controlled sustainable project closeout. The authors used the integrative project delivery approach along with past construction research models and personal experience to guide the development of the framework. Steps within the framework are illustrated using five projects from three countries. This work assumes that the ultimate objective of the project is local operational sustainability with the NGO’s presence …

Bs News July/August

Building Services Engineering

No abstract provided.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Assessing Gait And Postural Stability Of Construction Workers Using Wearable Wireless Sensor Networks, Houtan Jebelli

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Falling accidents are a leading cause of fatal and nonfatal injuries in the construction industry. This fact demonstrates the need for a comprehensive fall-risk analysis that incorporates the effects of construction workers’ physiological characteristics. In this context, the objective of the thesis is to investigate and validate the usefulness of the gait- and postural-stability metrics in assessing construction workers’ fall risks. Diverse metrics that assess the capability to keep the body balanced and maintain coordination of body segments during locomotion (gait stability) and stationary postures (postural stability) have been introduced and used in clinical applications. However, their usefulness in the …

Bs News May/June

Building Services Engineering

No abstract provided.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Bs News March/April

Building Services Engineering

No abstract provided.

Building And Growing With Mobile Technology, Chris Lierheimer

The Professional Constructor

Today’s construction managers have an arsenal of mobile technologies at their disposal, all of which make managing projects vastly more organized and efficient than ever before. In this paper, I will explore in detail three different mobile technologies that the modern contractor has at his or her disposal, their benefits, potential pitfalls that they may present, and my thoughts on the future of these tools. I will share personal experience with, and research based on topics ranging from building information modeling, to RFID chip tracking of resources, to cloud based programs that streamline information flow.

Using Mobile Technology For Managing Construction Projects, Paul Shaw

The Professional Constructor

This essay examines the use and application of emerging mobile technologies in the construction industry. Mobile phones and tablets are discussed in-depth, and can be used to replace office tools, to collaborate, and to bring building information modeling (BIM) technology out into the field. Next, wearable computing technology is discussed, including Google Glass and smart hard hats. This technology provides another avenue for construction information access in the field. Finally, unmanned aerial vehicles are discussed, along with their challenges and potential benefits. Increased technology use will absolutely improve efficiency and profitability in the construction industry.

Solar Orientation For Low-Energy Residential Building In Pagosa Springs, Colorado, Torry D. Hessman, Caroline M. Clevenger, Maryellen C. Nobe, Katharin Leigh

The Professional Constructor

This research compares the energy performance of 43 homes. Seven homes, constructed by a single builder using passive design principles, are the focus of the study. The remaining 36 homes, more conventionally built, establish a baseline for local residential energy performance. All of the homes are located within a six square-mile geographical region in Pagosa Springs, Colorado. Researchers collected utility data over a two year period, from September 2009 to August 2011. While other factors impact performance, for this study the dependent variable was energy consumption in British Thermal Units (BTUs) per square foot per season. The independent variable was …