Construction Engineering Commons^™

Virtual Surface Temperature Sensor For Multi-Zone Commercial Buildings, Yuebin Yu, Denchai Woradechjumroen, Daihong Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

Multi-zone structure is commonly used in small commercial office buildings, retail stores and supermarket. While there is no adjacent wall between the zones, the impact of a neighbor zone on the current zone can be approximated and analyzed through the application of virtual walls. It is critical to accurately estimate the virtual wall surface temperature in order to evaluate the model uncertainty and apply improved supervisory control on multiple rooftop air-conditioning units (RTUs). We propose an innovative virtual surface temperature sensor based on system-identification to solve this challenge. The validation of the virtual temperature model is processed by the three …

Shallow Flat Soffit Precast Concrete Floor System, George Morcous, Maher Tadros

Durham School of Architectural Engineering and Construction: Faculty Publications

A precast concrete floor system that eliminates the need for column corbels and beam ledges while being very shallow. The main advantages of the present system include a span to-depth ratio of 30, a flat soffit, economy, consistency with prevailing erection techniques, and fire and corrosion protection. The present system consists of continuous precast columns, prestressed rectangular beams, hollow-core planks, and cast-in-place composite topping. Testing results have indicated that a 12 inch deep flat soffit precast floor system has adequate capacity to carry gravity loads (including 100 psf live load) in a 30 ft x 30 ft bay size. Testing …

Behavior Of I-Section Gfrp Beam Including Retrofitting For Damage Effects, Mamadou Konate, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of a study of an I-section Glass Fiber Reinforced Polymer (GFRP) beam including retrofitting for damage effects. A total of three beam tests were conducted in the following sequence: GFRP beam with no retrofitting and a single mid-span web brace; the partially damaged (cracked) beam with GFRP plates used for retrofitting; and the retrofitted beam re-tested with the lateral brace at the top flange level. Both cracking and lateral-torsional buckling behavior is studied and experimental load-deflection relationships recorded. Using the mechanical properties of GFRP based on the experimental data, theoretical predictions are made for the …

Hybrid Of Natural Element Method (Nem) With Genetic Algorithm (Ga) To Find Critical Slip Surface, Shahriar Shahrokhabadi, Vahid Khoshfahm, Hamed Nabizadeh Rafsanjani

Durham School of Architectural Engineering and Construction: Faculty Publications

One of the most important issues in geotechnical engineering is the slope stability analysis for determination of the factor of safety and the probable slip surface. Finite Element Method (FEM) is well suited for numerical study of advanced geotechnical problems. However, mesh requirements of FEM creates some difficulties for solution processing in certain problems. Recently, motivated by these limitations, several new Meshfree methods such as Natural Element Method (NEM) have been used to analyze engineering problems. This paper presents advantages of using NEM in 2D slope stability analysis and Genetic Algorithm (GA) optimization to determine the probable slip surface and …

Bs News January/February

Building Services Engineering

No abstract provided.

Bs News November/December

Building Services Engineering

No abstract provided.

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

An Analysis Of Safety Culture & Safety Training: Comparing The Impact Of Union, Non-Union, And Right To Work Construction Venues, Harry Miller Csp, Tara Hill, Kris Mason, John S. Gaal Edd

Online Journal for Workforce Education and Development

The construction industry is one of the most dangerous sectors of the US economy. As such, the safety attitudes and climate within small (residential) contracting firms may play a role in providing a safe culture and working environment. The intent of this practitioner-based research study is to compare and determine if there is a difference in safety practices—based on documented field inspections and their related original number of violations observed by OSHA—between union residential carpentry contractors in the St. Louis area and:

1) non-union residential carpentry contractors in the St. Louis area;

2) non-union residential carpentry contractors across Missouri; and …

Evaluation Of Phase Change Materials For Cooling In A Super-Insulated Passive House, Jeffrey Stephen Lauck

Dissertations and Theses

Due to factors such as rising energy costs, diminishing resources, and climate change, the demand for high performance buildings is on the rise. As a result, several new building standards have emerged including the Passive House Standard, a rigorous energy-use standard based on a super-insulated and very tightly sealed building envelope. The standard requires that that air infiltration is less than or equal to 0.6 air changes per hour at a 50 Pascal pressure difference, annual heating energy is less than or equal to 15kWh/m2, and total annual source energy is less than or equal to 120 kWh/m2. A common …

Bs News September/October

Building Services Engineering

No abstract provided.

Implementation Of Integrated Project Delivery On Department Of Navy Military Construction Projects, Christopher S. Lee

UNLV Theses, Dissertations, Professional Papers, and Capstones

The concept of the project delivery system refers to the overall processes by which a project is designed, constructed, and/or maintained. There are many different types of project delivery systems to fit particular situations involving the owner and his intended project. The project delivery system is what establishes the framework that enables a construction project to be developed and ultimately executed.

The construction industry has observed that projects (both private and public) frequently suffer from factors such as adversarial relationships, low roductivity, high inefficiency and rework, frequent contractual disputes concerning who was at fault, and lack of innovation. Not only …

Bs News July/August

Building Services Engineering

No abstract provided.

Seismic Performance Comparison Of A Fixed-Base Versus A Base-Isolated Office Building, Nicholas Reidar Marrs

Master's Theses

The topic of this thesis is base isolation. The purpose of this thesis is to offer a relative understanding of the seismic performance enhancements that a typical 12-story steel office building can achieve through the implementation of base isolation technology. To reach this understanding, the structures of a fixed-base office building and a base-isolated office building of similar size and layout are designed, their seismic performance is compared, and a cost-benefit analysis is completed. The base isolation system that is utilized is composed of Triple Friction Pendulum (TFP) bearings.

The work of this thesis is divided into four phases. First, …

Cal Poly Brocade Challenge 2013, Chandler Morehardt, Alexa Coburn, Juan Silva, Kerry Sun, Greg Wang, Raul Chagoya, Jd Torres

Architectural Engineering

No abstract provided.

Precast/Prestressed Concrete Truss-Girder For Roof Applications, Peter S. Samir

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Steel trusses are the most popular system for supporting long span roofs in commercial buildings, such as warehouses and aircraft hangars. There are several advantages of steel trusses, such as lightweight, ease of handling and erection, and geometric flexibility. However, they have some drawbacks, such as high material and maintenance cost, and low fire resistance. In this paper, a precast concrete truss is proposed as an alternative to steel trusses for spans up to 160 ft. without intermediate supports. The proposed design is easy to produce and has lower construction and maintenance costs than steel trusses. The proposed design is …

Bs News May/June

Building Services Engineering

No abstract provided.

Vulnerability Of Progressive Collapse In Reinforced Concrete Flat-Plate Buildings, Jinrong Liu

College of Engineering: Graduate Celebration Programs

• Progressive collapse is the spread of initial local failure, causing partial or
  even total collapse of a building.
• Flat plate structure is widely used for office and residential buildings.
• There is a large inventory of older flat plate building without continuous slab bottom reinforcement through columns.
• Limited knowledge exists regarding the risk of disproportionate collapse in
  older flat-plates under sudden column removal during abnormal events.
• Reliable mechanical model is needed for structural evaluation.

Precast Concrete Insulated Wall Panel Corbels Without Thermal Bridging, Mohamed Elkady

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

The common practice in corbel design is to block out the insulation in order to provide a solid concrete area at the corbel location. This connection practice results in thermal bridging, which significantly reduces the energy performance of the panel. For example, the PCI Design Handbook indicates that the reduction in thermal resistance caused by a solid part with an area equal to 9% of the total panel surface area is as high as 42%. This paper presents a discussion of a new concept for corbel design of insulated wall panels with the thermal break totally preserved. Two different designs …

Multi-Objective Time-Cost Optimization Using Cobb-Douglas Production Function And Hybrid Genetic Algorithm, Zhigang Shen, Ashkan Hassani, Qian Shi

Durham School of Architectural Engineering and Construction: Faculty Publications

Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost. Crashing cost function was either assumed without much justification, or came from historical data of some real projects. As a result the conclusions of the papers can hardly be used to guide allocations of labor and equipment resources respectively. The authors believe Cobb-Douglas function provides a much-needed piece to modeling the cost functions in the construction time-cost tradeoff problem during the crashing process. We believe this new perspective fills a gap of existing time-cost tradeoff research by considering project duration, labor and equipment cost as …

Quantum Man, Julian Voss-Andreae

The Transdisciplinary STEAM+ Journal

According to quantum physics, the world is fundamentally quite different than it seems. Drawing inspiration from the underlying nature of reality, former quantum physicist Julian Voss-Andreae created an image of a walking human as a quantum object. Made up of parallel sheets of steel, the sculpture is a metaphor for the counter-intuitive world of quantum physics. Symbolizing the dual nature of matter with the appearance of classical reality on the surface and cloudy quantum behavior underneath, the sculpture seems to consist of solid steel when seen from the front, but dissolves into almost nothing when seen from the side.

Bs News March/April

Building Services Engineering

No abstract provided.

Wind Loading On Trees Integrated With A Building Envelope, Aly Mousaad Aly, Alberto Zasso, Girma Bitsuamlak, Alberto Nicola Longarini, Arindam Gam Chowdhury

Faculty Publications

With the sustainability movement, vegetated building envelopes are gaining more popularity. This requires special wind effect investigations, both from sustainability and resiliency perspectives. The current paper focuses on wind load estimation on small- and full-scale trees used as part of green roofs and balconies. Small-scale wind load assessment was carried out using wind tunnel testing in a global-effect study to understand the interference effects from surrounding structures. Full-scale trees were investigated at a large open-jet facility in a local-effect study to investigate the wind-tree interaction. The effect of Reynolds number combined with shape change on the overall loads measured at …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Z. Ellen Peng, Lily M. Wang, Siu-Kit Lau, Adam M. Steinbach

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

Acoustic Tweets And Blogs: Using Social Media In An Undergraduate Acoustics Course, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Each fall, the author teaches an undergraduate architectural acoustics course to around 40 third-year architectural engineering students at the University of Nebraska. Beginning in 2011, a social media component was introduced to explore the use of this technology and how it may supplement the students' learning experience. Students were given an opportunity to receive extra credit by using Twitter and/or blogging about course material using a set hashtag (#AE3300) or through the course website. Results were positive, and the author will discuss pros and cons that she has experienced in adding this social media component. Suggestions for future implementations and …

Bs News January/February

Building Services Engineering

No abstract provided.

Bs News November/December

Building Services Engineering

No abstract provided.

Lifecycle Energy Consumption Prediction Of Residential Buildings By Incorporating Longitudinal Uncertainties, Endong Wang, Zhigang Shen

Durham School of Architectural Engineering and Construction: Faculty Publications

Accurate prediction of buildings’ lifecycle energy consumption is a critical part in lifecycle assessment of residential buildings. Longitudinal variations in building conditions, weather conditions and building’s service life can cause significant deviation of the prediction from the real lifecycle energy consumption. The objective is to improve the accuracy of lifecycle energy consumption prediction by properly modelling the longitudinal variations in residential energy consumption model using Markov chain based stochastic approach. A stochastic Markov model considering longitudinal uncertainties in building condition, degree days, and service life is developed: 1) Building’s service life is estimated through Markov deterioration curve derived from actual …

The Current State Of Wireless Information Technology Among Employers Of Bowling Green State University Construction Management Students, Aaron Seymour

Master of Technology Management Plan II Graduate Projects

Successful implementation of wireless technology in the construction industry has the potential to streamline the building process and improve the service that is delivered to the owners of projects. A need exists for improving access and transfer of digital communication and documentation, regardless of the time or location. Recent developing trends in technology promise to introduce efficiencies that were not previously available within the industry. This study seeks to identify the current state of wireless information technology among employers of Bowling Green State University Construction Management students. The research design analyzed quantitative data from a web-based survey that presented results …

Bs News September/October

Building Services Engineering

No abstract provided.

Implementing Building Information Modeling In Public Works Projects In Ireland, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

The Irish State in recent years has suffered huge financial losses in the public works sector, which has now pushed the Irish Government to explore new ways of controlling cost. This background lead to the introduction of the Capital Works Management Framework in 2007 which aimed to support the certainty of outcome in terms of cost and quality, as well as improved risk management, through the implementation of fixed price contracts. In order to successfully compete within this framework it is recommended by the authors, that Irish Government moves towards the legal mandating of BIM. This can ensure a greater …