Architectural Engineering Commons^™

New Method To Calculate Friction Velocity In Smooth Channel Flows Using Direct Numerical Simulation Data, Harshit Mishra, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, we leverage the direct numerical simulation (DNS) data for closed-channel flow for a range of friction Reynolds number (Reτ∼180-5,000) to develop a new one-point friction velocity method (OPFVM) to calculate friction velocity U∗ in terms of free-surface velocity Um, flow depth h, and kinematic viscosity ν. In contrast to prevalent methods that require several cumbersome near boundary measurements to obtain friction velocity, the OPFVM relies on a single easy-to-measure free-surface velocity measurement. The formulation is used to obtain friction velocity for a closed-channel flow (CCF) DNS regime with Reτ=10,049 and on four open-channel flow (OCF) DNS regimes …

Freezing-Thawing Hysteretic Behavior Of Soils, Jidong Teng, Antai Dong, Sheng Zhang, Xiong Zhang, Daichao Sheng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The soil freezing characteristic curve (SFCC) plays a crucial role in investigating the soil freezing-thawing process. Due to the challenges associated with measuring the SFCC, there is a shortage of high-quality or rigorous test results with sufficient metadata to be effectively used for applications. Current researchers typically conduct freezing tests to measure the SFCC and assume a singular SFCC when studying the freezing-thawing process of soils, although limited studies indicated that there is a hysteresis during the freezing and thawing process. In this paper, a series of freezing-thawing tests were performed to assess the SFCC, utilizing a precise nuclear magnetic …

Rotational Rheometry Test Of Portland Cement-Based Materials – A Systematic Literature Review, Laura Silvestro, Artur Spat Ruviaro, Geannina Lima, Luís Urbano Durlo Tambara Júnior, Dimitri Feys, Ana Paula Kirchheim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Systematically Reviews 62 Papers on the Use of Rotational Rheometry to Assess the Fresh State Behavior of Portland Cement-Based Materials. the Research Highlights the Wide Variation in Test Methods and Aims to Provide a Comprehensive overview. Findings Reveal that 50.0% of Studies Employed Vane Geometry, despite its Limitations in Providing Transformation Equations. Regarding Dynamic Shearing Tests, 67.0% Followed a Consensus using a Pre-Shearing Step and a Stepwise Routine with Stabilization Times ≥ 10 S. While the Bingham Model is Commonly Used, the Study Emphasizes the Importance of Considering Shear-Thinning Behavior in Cementitious Materials. Models Like Herschel-Bulkley and Modified …

Sustainable Sensing With Paper Microfluidics: Applications In Health, Environment, And Food Safety, Sanjay Kumar, Jyoti B. Kaushal, Heow Pueh Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

This manuscript offers a concise overview of paper microfluidics, emphasizing its sustainable sensing applications in healthcare, environmental monitoring, and food safety. Researchers have developed innovative sensing platforms for detecting pathogens, pollutants, and contaminants by leveraging the paper’s unique properties, such as biodegradability and affordability. These portable, low-cost sensors facilitate rapid diagnostics and on-site analysis, making them invaluable tools for resource-limited settings. This review discusses the fabrication techniques, principles, and applications of paper microfluidics, showcasing its potential to address pressing challenges and enhance human health and environmental sustainability.

3d Printing Of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials: From Mixture Design To Printability Evaluation, Haodao Li, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainability and limitations in embedded reinforcement are the main obstacles in digital fabrication with concrete. This study proposed a 3D printable fiber-reinforced calcined clay-limestone-based cementitious material (FR-LC3). The binder systems incorporating calcined clay (CC) and limestone filler (LF) were optimized by determining the flow characteristics and water retention ability of the paste. The effect of fiber volume on the key fresh and mechanical properties of the fiber-reinforced mortars made with the optimized binder was evaluated. A combination of offline assessments and inline printing were employed to investigate the printability of the FR-LC3 with various binder systems and viscosity-modifying admixture (VMA) …

The Impact Of Outdoor Thermal Comfort On Users’ Walkability: Study Case In Al Ain Square, Al Ain City, Uae, Alyazia Saeed Alnehayan

Theses

Living in a hot dry arid climate limits the walkability of its inhabitants. The excessive heat and dryness of the weather undoubtedly make walking a less tempting, encouraging, and pleasant choice for getting around the city. For that reason, this master thesis analyzes the various strategies used to enhance outdoor thermal comfort. Outdoor thermal comfort is controlled by numerous factors, including street and building orientation, vegetation, shading devices, and water bodies. The purpose of this study is to examine the relationship between walkability and UTCI values (universal thermal comfort index) in the context of Al Ain Square, a neighborhood in …

Application Of Multidisciplinary Community Resilience Modeling To Reduce Disaster Risk: Building Back Better, Wanting "Lisa" Wang, John W. Van De Lindt, Blythe Johnston, P. Shane Crawford, Guirong Grace Yan, Thang Dao, Trung Do, Katie Skakel, Mojtaba Harati, Tu Nguyen, Robinson Umeike, Silvana Croope, Andre R. Barbosa

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

From december 10 to december 11, 2021, a deadly tornado outbreak struck across several states in the us, including arkansas, illinois, kentucky, and tennessee. This tornado outbreak resulted in at least $3.9 Billion in damage, more than 90 fatalities, and hundreds of injuries. Mayfield, kentucky, a small city in the eastern united states, was hit by a long-track tornado rated as an enhanced fujita 4 (ef4) scale and was one of the communities most heavily damaged during the tornado outbreak. Following the 2021 tornado event, an analysis was performed in the interdependent networked community resilience modeling environment (in-core) for the …

Masonry Column Analysis Through Python, Ali Sherief Saleh

Architectural Engineering

This project serves as a study of Masonry Column Analysis and Design through the lens of the TMS 402 (22) Code: mimicking in-firm tools without using finite-element analysis. Chapter 9 of the TMS 402 (22) code provides the outline of the process taken to analyze these columns.

Investigation compares columns using the Python program to hand-calculations designs as to show additional capability that is lost due to approximation. PM-interaction for the columns is computed by a stress-strain approach. This report expands on the python design and approach to User Interface and inputs that are needed to analyze multiple datatypes with …

Modeling And Design Parameter Optimization To Improve The Sensitivity Of A Bimorph Polysilicon-Based Mems Sensor For Helium Detection, Sulaiman Mohaidat, F. M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Helium is integral in several industries, including nuclear waste management and semiconductors. Thus, developing a sensing method for detecting helium is essential to ensure the proper operation of such facilities. Several approaches can be used for helium detection, including based on the high thermal conductivity of helium, which is several times higher than air. This work utilizes the high thermal conductivity of helium to design and analyze a bimorph MEMS sensor for helium sensing applications. COMSOL Multiphysics software (version 6.2) is used to carry out this investigation. The sensor is constructed from poly-silicon and SiO₂ materials with a trenched …

Polypropylene As Partial Fine Aggregate Substitute In Concrete, Samuel E. Royston, Chrisitan G. Achkar, Nicholas B. Tabarez

Architectural Engineering

The objective of this project is to discover a structurally effective method in repurposing recyclable plastic waste through its partial substitution for traditional fine aggregate in concrete.

Results obtained from analysis indicate a 25 percent compressive strength reduction with polypropylene at a 10 percent partial substitution for total sand content. This material successfully performed as an alternative, presenting a ductile mode of failure.

Three material alternatives - polypropylene, polyethylene, and rubber - were substituted for a percentage of sand. These materials underwent concrete cylinder crushing tests to determine their ultimate crushing strength, with the intent of identifying the most effective …

Cardboard Concrete Column Formwork, Danny Shrestha, Joelle Schalesky

Architectural Engineering

This project is an exploration of cardboard as a potential material for construction formwork for concrete columns. Multiple material tests were conducted to explore the behavior of cardboard and concrete. Multiple specimens of cardboard were tested for modulus of elasticity, moment of inertia, and tensile strength. Concrete was tested for its apparent lateral fluid pressure under vibration. Cardboard formwork was then designed and constructed based on these tested behaviors. The final design of the formwork consisted of folding cardboard sheets lined with hardboard, supported by wood studs, and tied by plastic banding straps.

Ultimately, two concrete columns―8' and 10' in …

Ace Mentor Program - Central Coast Chapter, Brayden Samuel Groshart

Construction Management

For my senior project, I established a chapter of the ACE (Architecture, Construction, and Engineering) Mentor Program in San Luis Obispo, California. This program provides high school students with hands-on experience and exposure to careers in the architecture, construction, and engineering industries. The program spanned eight weeks, balancing theoretical knowledge and practical application. The curriculum began with sessions on the fundamentals of architecture, engineering, and construction. In order to expose the students to real world practices, we organized tours of an architecture firm, an engineering firm, and an active construction site. These visits allowed students to engage with professionals, observe …

Construction Of Lightly Reinforced Concrete Shear Wall And Footings, Luke Jackson Method

Construction Management

This paper details the construction of two cast in place foundations as well as a lightly reinforced cast in place wall. The project, located inside the high bay, provides the Architectural Engineering (ARCE) department with an opportunity to test Fiber Reinforced Polymer wrap as a retrofitting option for walls dating back to pre-1980s. Due to site conditions, and project design, this project required extensive planning and communication within our team, faculty advisors, and shop technicians. This paper will discuss the phasing of construction and procurement of material that was required for the completion of this project. It also aims to …

Son Care Foundation – Lean To Shade Structure Design And Construction, Ryan Joseph Mccann

Construction Management

This paper discusses the design and construction of a lean-to-shade structure built for the Son Care Foundation in San Luis Obispo. The Son Care Foundation is a nonprofit organization that raises guide dogs for veterans and first responders with PTSD. This shade structure is 16 feet long and 6 feet wide, its height slopes from 9 feet in the front down to 8 feet in the back creating a roof pitch of 2:12. The sheet metal roof also has an overhang of approximately 1 foot. As requested by the client, the shade structure was designed to fit the aesthetic of …

Restoration Of The Cantilever Deck In Poly Canyon, Calvin S. Morgan, Calvin P. Vigeant, Roger G. Biddle

Construction Management

This interdisciplinary project aims to restore the Cantilever Deck in the Experimental Structures Laboratory back to an operational condition. As of Spring 2023, the deck has fallen into a state of disrepair and has been deemed structurally unsound by the university. The structural disrepair is concentrated around the wooden beams underneath the deck, but the handrails and overall color of the assembly have also fallen to levels deemed undesirable. The Restoration will remedy all these issues as well as guarantee that our repairs will last long into the future. This project is an interdisciplinary effort, the team consists of ARCE …

Architecture As A Carbon-Based Practice, Qixin Yu

Masters Theses

Carbon serves as both a silent protagonist and a looming antagonist in the narrative of architecture, shaping not only the physical structures we inhabit but also the ecological legacy we leave behind.

Centuries of human exploitation of the environment have led to climate and material crises. Shifting this dynamic requires action at micro (matter), meso (material), and macro (materiality) levels. Biogenic materials offer significant potential for carbon sequestration and present opportunities for the building industry to collaborate with nature rather than merely extract from it.

This thesis establishes a research and manufacturing practice that prioritizes material innovation, carbon sequestration, environmental …

Performance Of Co2-Cured Alkali-Activated Blast-Furnace Slag Incorporating Magnesium Oxide, Yubin Jun, Seong Ho Han, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated characteristics of alkali-activated slags incorporating magnesium oxide (MgO) subjected to CO₂ curing. The samples were prepared by adding 2%, 5%, and 10% MgO to the total binder mass. The mixture was activated with potassium hydroxide (KOH) and cured in a CO₂ incubator for 3 days. The compressive strength of the MgO-incorporated CO₂-cured alkali-activated slag was higher than that of the conventional alkali-activated slag at all ages up to 28 days. No reduction in the strength was observed over time. The enhanced strength was independent of MgO content. Combined X-ray diffraction with thermogravimetric analysis …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Chloride Binding Mechanism In Seawater-Mixed Uhpc, Wei Zhang, Dawei Ding, Mengmeng Li, Tiao Wang, Hongyan Ma, Binmeng Chen, Hongxing Hu, Jizhou Chen, Xiaomin Liu, Dongshuai Hou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The rapid development of marine concrete structures and the sharp shortage of freshwater resources contribute to the wide investigation of seawater-mixed ultra-high-performance concrete (swuhpc). However, few studies have investigated the chloride ions (cl-) binding mechanism of swuhpc. Herein, the chloride binding experiments and molecular dynamics (md) simulation were carried out to reveal the physically and chemically bound cl- mechanisms of swuhpc. The results of the experiments clearly demonstrate that the addition of silica fume (sf) led to a significant decrease in the capacity of cl- binding. Conversely, the incorporation of metakaolin (mk) resulted in a marked increase in the content …

Raising The Green Roof: Enhancing Youth Water Literacy Through Built Environment Education, Laura B. Cole, Lilian Priscilla, Laura Zangori, Beth Kania-Gosche, Joel G. Burken

Teacher Education and Certification Faculty Research & Creative Works

Green Roofs Cool Cities, Clean the Air, Provide Habitat, and Manage Stormwater. They Are Compelling Tools to Teach Interconnected Human-Ecological Systems. This Study Included the Design, Pilot, and Evaluation of a Fourth-Grade Science Unit Entitled "Raising the Green Roof", Exploring These Connections. Five Classrooms in Two Midwestern U.S. Public Elementary Schools Participated, and 4th-Grade Students (N = 73) Drew Systems Models at Three Time Points (212 Models) and Wrote their Ideas. Qualitative Content Analyses of the Models Showed that Learners Were Increasingly Combining Social Systems (Green Roof Infrastructure) with Ecological Systems (Water Cycle) Across the Unit. Students Also Increasingly Evidenced …

Four-Way Cfd-Dem Coupling To Simulate Concrete Pipe Flow: Mechanism Of Formation Of Lubrication Layer, Tooran Tavangar, Masoud Hosseinpoor, Jeffrey S. Marshall, Ammar Yahia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study introduced a four-way CFD-DEM coupling approach to simulate the shear-induced particle migration (SIPM) mechanism leading to formation of the lubrication layer (LL) during concrete pumping. The CFD-DEM simulations considered the coupled effect of concentration (10 %–40 %) and wide size distribution (1–17 mm) of aggregate and rheology of the mortar for forces between the suspending matrix and the particles (and vice versa), as well as force transmission directly between particles (and the pipe wall). The formation of the LL was successfully simulated through a more realistic understanding the SIPM mechanism and rheological evaluation across the pipe with comparable …

Surface Coating Method For Cement-Based Materials To Improve Chloride Ion Penetration Resistance Using Amine-Based Co2 Solvent, Seongho Han, Tae Hoon Han, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The application of coatings on concrete surfaces serves as a protective shield, guarding the structure against chlorides and averting corrosion of the reinforcement, consequently enhancing its durability. This study investigates the resistance of cement mortar samples to chloride ion penetration when coated with an amine-based carbon dioxide (CO2) solvent. Various factors, including monoethanolamine (MEA) concentrations of 1, 10, and 30 wt.%; water-to-cement ratios (w/cm) of 0.35, 0.4, and 0.5; coating timings on day 3 and day 27; and pre-conditioning methods such as air drying, are investigated for their impact on the performance of chloride penetration resistance. Specifically, pre-conditioning significantly enhanced …

A Review Of Whipple Shield Ballistic Limit Equations, S. Ryan, W. (William) P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ballistic limit equations (BLEs) are semi-analytical expressions used to predict the risk posed by micrometeoroid and orbital debris (MMOD) impacts on a spacecraft. A foundational BLE, known as the new non-optimum (NNO) equation was published by Eric Christiansen of NASA Johnson Space Center in 1990 for application on Whipple shields – two-plate configurations consisting of a thin sacrificial plate located at some standoff in front of the spacecraft pressure hull or structural wall. Today, BLEs for almost all multi-plate spacecraft structures, e.g., honeycomb sandwich panels, monolithic structures with thermal insulation blankets, etc., are based on the NNO Whipple BLE. We …

Spatial Hearing In Simulated Reverberant Classroom Environments, Gabriel Seth Evan Weeldreyer

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Spatial hearing provides access to auditory spatial cues that promote speech perception in noisy listening situations. However, reverberation degrades auditory spatial cues and limits listeners’ ability to utilize these cues for segregating target speech from competing babble. Hence, spatial unmasking—an intelligibility benefit from a spatial separation between a target and masker—is reduced in reverberant environments as compared to free field. This work tests the hypothesis that interaural decorrelation, the result of increasing reverberation, will broaden the perceived auditory source width with a cascading effect of reduced auditory spatial acuity and subsequently poorer spatial unmasking. To understand the perceptual consequences of …

Using Virtual Reality Technologies In Built Environment Education, Rebekah Floyd, Kayla Walters, Stuart Werner Baur

Undergraduate Research Conference at Missouri S&T

Virtual reality (VR) offers transformative potential in built environment education, including human-made surroundings like buildings and infrastructure. This review explores VR's benefits, challenges, and trends in this field. VR fosters immersive learning, allowing students to explore architectural designs and urban planning scenarios. It provides hands-on experiences, enhancing spatial understanding and critical thinking. Simulations enable safe experimentation with design ideas and construction techniques without the real-life limitations or risk holding students back. However, challenges include high costs, technical limitations, and the need for educator training. Ensuring accessibility for all students is crucial. Despite challenges, VR's potential to revolutionize built environment education …

Analyzing The Viability Of Novel Reactor Technology, Auston Obsuth

Undergraduate Research Conference at Missouri S&T

This study explores an innovative anaerobic digestion reactor technology aimed at improving the sustainability and efficiency of organic waste management. By employing a system without mechanical parts, it seeks to significantly enhance energy conversion from waste, tackling waste accumulation and the need for renewable energy sources. The project will use a multidisciplinary approach, incorporating economics, engineering management, and environmental science, to thoroughly evaluate the reactor's performance in terms of gas production, stability, and efficiency. Additionally, it will assess the economic viability and environmental impact, emphasizing advantages such as waste reduction and decreased greenhouse gas emissions. Additionally, preliminary market analysis and …

Effects Of Rest Time And Curing Regime On Short- And Long-Term Strength Of Class C Fly Ash-Based Alkali-Activated Mortars, Cedric Kashosi, Ahmed Gheni, Eslam Gomaa, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated how different rest times affect the strength development of fly-ash-based alkali-activated mortar (aam) over a period of 90 days. Two types of fly ash with varying calcium oxide contents of 37 and 21% were used. The rest times ranged from 2 to 36 h, and three curing methods (ambient, oven, and steam) were tested. The results showed that the rest time significantly influenced the compressive strength of the aam. The optimal rest time was found to be between 12 and 30 h depending on the curing method and fly ash type. Beyond this range, there were only …

Building For Safety: Design Considerations For Refuge Areas In Tall Buildings From Quality Management Perspective, Enass. A. Salama, Heba. M. Gaber, Ahmed. M. Selim

Journal of Engineering Research

New El Alamein City is one of the largest urban projects in Egypt, and the largest project on the north coast. Tall buildings (super high-rise buildings) are considered the prevailing trend by architectural designers to obtain the maximum view of the Mediterranean Sea. The provision of safety evacuation in emergencies for these buildings’ occupants is a crucial challenge from the Quality management point of view. In contrast, there are no sufficient architectural design guidelines for the tall buildings provided by the Egyptian code for protecting buildings from fire, especially the design of the refuge areas. This study aims to investigate …

Enhancing The Sustainability Of The Visual Scenery Elements Of Urbanism To Achieve Quality-Of-Life Standards, Sahar Said Gado, Henar A. Kalefa

Journal of Engineering Research

Abstract

The quality of life for urban areas is an idea that has recently been discussed in various studies as a response to the many problems facing cities around the world as well as in Egypt. As the city is the product of a reflection of its identity and cultural and civilised heritage that is growing and changing, and enhancing the sustainability of the elements of the visual image of the city is one of the changes that, in turn, seeks to create a suitable urban environment for the population and reach the highest rates of environmental comfort and complete …

تقنيات الاضاءة الصناعية وتأثيرها فى الفراغ السكنى على السلوك الانسانى, Samah Kamal Elfeky, Walaa Ahmad Nour, Lobna Abdelfatah Agha

Journal of Engineering Research

* Lighting is considered of main items in daily life begining from natural Lighting to industrial lighting. with all of it's different shapes . it is considerdone of the most important data that point Blank spaces and works to show architectural spaces, aesthetic values through being sharp and weak, ensure borders show texture or hide Features, suggest wideness, narrowness of space as the most beautiful design don't see beautiful without good lighting which designed carefully.Due to diversity of human activities, architictums spaces and it is wideness. Increased dependence on industrial Lighting to strengthen Job of performance, beauty of internal, external …