Architectural Engineering Commons^™

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

In the light of future development of lunar structures, in-situ feldspar beneficiation is imperative for metal extraction. This research incorporates the tandem use of electrostatic sieving and magnetic separation for collecting a specific size range and mineral composition from lunar soil that optimizes subsequent chemical processing. While earlier works focused on silt-sized particles, this work expands that range up to medium-grained sand with a greater variety of potential lunar regolith compositions. This work shows that a 2.5 kV, 7 Hz to 30Hz frequency, single-phase square wave can lift silt and fine sand for collection. This lifting is successful directly from …

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith particles with applications to the concept of electrostatic sieving. The new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. Case studies for a concept of electrostatic sieving were chosen to validate the new model. The simulation achieved similar yields reported in previous works, which served as validation of the model. The new model is computationally efficient and could serve as a design, analysis, and optimization tool.

2023 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Prediction Of Self-Consolidating Concrete Properties Using Xgboost Machine Learning Algorithm: Part 1–Workability, Amine El Mahdi Safhi, Hamed Dabiri, Ahmed Soliman, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Interest in Implementing Self-Consolidating Concrete (SCC) in Major Construction Projects Has Increased Significantly in Recent Years. This Paper Reports the Results of an Extensive Survey of Experimental Data of More Than 1700 SCC Mixtures from over 100 Studies Published in the Last Decade. the Survey Included the SCC Mixture Proportioning, Key Fresh Properties Including Flowability, Passing Ability, and Segregation Resistance, as Well as Some of the Derived Properties (E.g., Paste Volume). the Statistical Analysis of the Reported Parameters Showed Wide Variations in Values. the Outcome of the Survey Indicates that SCC Mixture Design and Workability Properties Do Not Systematically …

Design And Performance Of Fiber-Reinforced Shrinkage Compensating Eco-Friendly Concrete, Kamran Aghaee, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Eco-Crete is an ecological and economical concrete that benefits from high packing density of solid materials and reduced paste. Eco-Crete can enhance the service life of structures by reducing the risk of shrinkage cracking. In this study, shrinkage mitigating materials included an expansive agent (EA), a shrinkage reducing admixture (SRA), and a lightweight sand (LWS), as well as steel and synthetic fibers were used to minimize the risk of cracking. A total of 35 fiber-reinforced Eco-Crete mixtures were prepared with 350 kg/m3 of cementitious materials and 55 % substitution of fly ash and slag. Key fresh and mechanical properties in …

Effect Of A Geothermal Heat Pump System On Cooling Residential Buildings In A Hot, Dry Climate, Rania Rushdy Moussa, Ayman H. Mahmoud

Architectural Engineering

ABSTRACT In the last century, electricity demand has doubled due to urban expansion, which has contributed to the formation of more urban heat islands (UHI) and the appearance of environmental hazards such as the global climate change phenomenon. Since residential buildings are considered the main electricity consumer sector in Egypt, they consume up to 42% of total energy consumption, which contributes to increasing temperatures and constitutes UHI in cities. In this context, the research aims to examine the effectiveness of using the closed vertical loop geothermal system (GSHPCV) for cooling residential buildings in a hot, dry climate, such as Cairo, …

Truck Platooning Reshapes Greenhouse Gas Emissions Of The Integrated Vehicle-Road Infrastructure System, Huailei Cheng, Yuhong Wang, Dan Chong, Chao Xia, Lijun Sun, Jenny Liu, Kun Gao, Ruikang Yang, Tian Jin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing greenhouse gas emissions has turned into a pillar of climate change mitigation. Truck platooning is proposed as a strategy to lower emissions from vehicles on roads. However, the potential interactive impacts of this technology on road infrastructure emissions remain unclear. Here, we evaluate the decarbonization effects of truck platooning on the integrated vehicle-road system at a large-scale road network level, spanning 1457 road sections across North America. We show that truck platooning decreases emissions induced by truck operations, but it degrades faster the durability of road infrastructure and leads to a 27.9% rise in road emissions due to more …

Effectiveness Of The Different Eutectic Phase-Change Materials In Cooling Asphalt Pavement, Jiasheng Dai, Feng Ma, Zhen Fu, Jenny Liu, Chen Li, Yingjie Hou, Hanli Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Choosing a Phase-Change Material (PCM) Adapted to the Specific Phase-Change Temperature (Tm) Required for Each Temperature Condition is of Utmost Importance in Cooling Pavements. Eutectic Phase-Change Materials (EPCMs) Realize the Customization of the Desired Tm and Reduce the Difficulty of Matching PCMs. This Work Aims to Investigate the Effectiveness of a Group of Binary/ternary EPCMs with Tm Ranging from 30 to 60 ℃ and Melting Enthalpies of Around 200 J/g as Thermal Regulation Components for Different Asphalt. to Achieve This Goal, the Thermal and Rheological Properties of Phase-Change Asphalt Binders (PCAB) Were Evaluated by Differential Scanning Calorimeter, Thermogravimetric, Fourier Transform …

Rheological And Mechanical Properties Of Kenaf And Jute Fiber-Reinforced Cement Composites, Seongwoo Gwon, Seong Ho Han, Thanh Duc Vu, Chanyoung Kim, Myoungsu Shin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the rheological and mechanical properties of cement composites with kenaf and jute fibers for use in shotcrete. The length and volume fractions of the fiber were varied; the rheological properties were analyzed in terms of air content, compression and flexural tests were conducted, and the degree of fiber dispersion was assessed using fluorescence microscopy. The rougher surfaces of the jute fibers led to a higher yield stress and viscosity of the composite compared to the kenaf fibers. The use of 10-mm-long jute fibers at 2.0% volume fraction led to optimal rheological properties while 30-mm-long jute fibers at …

Performance Of Co2-Cured Alkali-Activated Slag Pastes During Curing And Exposure, Yubin Jun, Seong Ho Han, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the efficiency of CO₂ curing in blast-furnace slag pastes activated with three concentrations of KOH solution (3, 4, and 5 M). The CO₂ curing was applied into the alkali-activated slag paste for 3 days. The CO₂-cured pastes were subjected to subsequent curing in a water bath or exposed to seawater. The mechanical properties and characteristics of the reaction products were compared. Full strength can be obtained within 3 days of the early CO₂ curing. The strength remained almost constant regardless of the activator concentration. The CO₂-cured samples produced more CaCO …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Organic Electronics In Biosensing: A Promising Frontier For Medical And Environmental Applications, Jyoti Bala Kaushal, Pratima Raut, Sanjay Kumar

Durham School of Architectural Engineering and Construction: Faculty Publications

The promising field of organic electronics has ushered in a new era of biosensing technology, thus offering a promising frontier for applications in both medical diagnostics and environmental monitoring. This review paper provides a comprehensive overview of organic electronics’ remarkable progress and potential in biosensing applications. It explores the multifaceted aspects of organic materials and devices, thereby highlighting their unique advantages, such as flexibility, biocompatibility, and low-cost fabrication. The paper delves into the diverse range of biosensors enabled by organic electronics, including electrochemical, optical, piezoelectric, and thermal sensors, thus showcasing their versatility in detecting biomolecules, pathogens, and environmental pollutants. Furthermore, …

Evaluation Of Residual Flexural Behavior Of Corroded Fiber-Reinforced Super Workable Concrete Beams, Jingjie Wei, Nima Farzadnia, Alfred Addai-Nimoh, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Effect of Macro Synthetic Fiber (MSF) Volume and Crack Widths on Corrosion of the Reinforcing Bars and Residual Flexural Behavior of Fiber-Reinforced Super-Workable Concrete (FR-SWC) Beams Exposed to Accelerated Corrosion. FR-SWC Beams Prepared with 0, 0.33%, and 0.66% MSF Were Pre-Cracked at 0.2-, 0.4-, and 0.75-Mm Widths Before Corrosion Testing. the Controlled Crack Width Was Initiated in One Set of Beams that Were Then Unloaded. the Crack Width Was Maintained for Another Set of Beams during Corrosion Testing by Inserting a Shim. Test Results Showed that the Use of 0.33% and 0.66% MSF Reduced Crack Development …

Cement-Based Materials With Solid-Gel Phase Change Materials For Improving Energy Efficiency Of Building Envelope, Zhuo Liu, Jiang Du, Ryan Steere, Joshua P. Schlegel, Kamal Khayat, Weina Meng

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This paper evaluated the cement-based materials incorporated with novel solid-gel phase change materials (PCMs) for improving the energy efficiency of building envelopes. This novel PCM is form-stable, which will not leak as solid-liquid PCMs do and not need encapsulation, and it features high energy-storage capacity. Experimental results showed that the thermal properties of cement-based materials were improved as the increase of PCM content. A 30% replacement of sand by volume with PCM can increase the latent heat of the mixture from around 0 to 7 J/g and decrease the thermal conductivity of PCM mortar based on the generalized self-consistent (GSC) …

Effect Of Type And Quantity Of Inherent Alkali Cations On Alkali-Silica Reaction, Pengfei Ma, Jiaoli Li, Jincheng Bai, Ying Zhuo, Lingyu Chi, Yanping Zhu, Zhenhua Shi, Hongyan Ma, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the macroscopical expansion induced by alkali-silica reaction (ASR) and its corresponding ASR products are investigated using ordinary Portland cement (OPC) mortar specimens with a gradient of boosted alkalis. Experimental results show that the expansion increases with the concentration of inherent alkalis. Sodium-boosted samples expand approximately three times as much as potassium-boosted samples. ASR gels that are present in aggregate veins are calcium-free and amorphous; the atomic ratios of ASR gels are nearly independent of the type and quantity of alkali cations. Aggregate ASR gel exudation occurs in high (≥2.5 %) sodium cases and produces potential Na-shlykovite. Crystalline …

Meta-Analysis Of Insulated Concrete Wall Panel Design Methods For Shear And Flexure Behavior, Maryam Al-Bayati

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Insulated Concrete wall panels have been designed and constructed since the early 1950s with various shear ties, dimensions, and methods; nonetheless, thermal bridging and rational design are still a concern. Many companies have recently developed plastic connectors that have gradually replaced solid concrete sections and steel connectors due to their superior thermal efficiency and strength. However, there is no generally accepted method for predicting the behavior of sandwich wall panels in structural engineering practice or codes, but many methods have been used since the early 1920. This study aims to evaluate the accuracy of current methods for predicting the flexural …

Continuous Time Recurrent Network For Human Activity Detection, Abdallah Al Zubi

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Human activity detection is crucial to personalize the control of the building environment. For example, understanding certain human activities (e.g., walking, sitting, etc.) for an occupant in a building helps provide the proper thermal comfort control. However, these applications require large-scale neural networks that are challenging to implement and train.

In this thesis, we implemented a continuous-time recurrent neural network implementation (CTRNN) network that can solve real-time human activity detection with a smaller-size network. The CTRNN uses differential equations with a time constant to describe the neuron equations. It was implemented and trained for the first time using TensorFlow. Specifically, …

Evaluation Of Feasibility And Performance Of Foamed Fire-Resistant Coating Materials, Anyou Zhu, Hanli Wu, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A preliminary study found high-performance cement mortar, geopolymer mortar, and magnesium phosphate cement mortar (MPCM) have the potential as new fire-resistant materials. In this study, foam was added to these three fire-resistant materials to further improve their rheological, mechanical, and fire-resistant performance and reduce costs. Systematic design and experimental programs were conducted. The results showed the addition of foam enhanced workability, adhesiveness, and fire resistance, allowing the materials to withstand higher temperatures and further delay heat transfer. A mixture of 70% MPCM and 30% foam was identified as the optimum design, which could withstand 1000 °C with low heat transfer …

Improving Rheological And Thermal Performance Of Gilsonite-Modified Binder With Phase Change Materials, Farshad Saberi K., Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Gilsonite, as a type of natural asphalt binder, has been used to improve the high-temperature performance of regular asphalt binders. However, the addition of Gilsonite may compromise binders' low-temperature thermal cracking resistance. In this research, polyethylene glycol (PEG), as one type of the phase change materials (PCMs), was used as an innovative material to balance the impacts of Gilsonite on high and low performance of asphalt binders. The dosages of Gilsonite and PEG were first determined based on the materials' rheological behaviors at low temperatures. The performance of the PEG-Gilsonite-modified binder was then fully evaluated in terms of the resistance …

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—Evaluating Structural Build-Up At Rest Of Mortar And Concrete, Sofiane Amziane, Kamal Khayat, Mohammed Sonebi, Arnaud Perrot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Paper Presents the Results of a Round-Robin Testing Program Undertaken by RILEM TC-266-Measuring Rheological Properties of Cement-Based Materials in May 2018 at the Université D'Artois in Bethune, France. Seven Types of Rheometers Were Compared; They Consisted of Four ICAR Rheometers, Viskomat XL Rheometer, EBT-V Rheometer, Sliding Pipe Rheometer (SLIPER), RheoCAD Rheometer, and 4SCC Rheometer, as Well as the Plate Test. This Paper Discusses the Results of the Evolution of the Static Yield Stress at Rest of Three Mortar and Five Concrete Mixtures that Were Determined using Two ICAR Rheometers, Viskomat XL, and EBT-V Rheometers, as Well as the Plate …

Effect Of Rotation On Mixing Efficiency In Homogeneous Stratified Turbulence Using Unforced Direct Numerical Simulations, Matthew Klema, S. Karan Venayagamoorthy, Annick Pouquet, Duane Rosenberg, Raffaele Marino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Diapycnal (irreversible) mixing is analyzed using thirty direct numerical simulations (at 1024 ³ resolution) of homogeneous rotating stratified turbulence (RST) in the absence of imposed shear or forcing. The influence of varied rotation and stratification rates on the energetics (in particular the dissipation rates of kinetic and potential energies) is presented. Data is also analyzed within a new parametric framework, using the turbulent Froude and Rossby numbers Frt= ϵ/ Nk, Rot= ϵ/ fk, where k is the turbulent kinetic energy, ϵ its rate of dissipation, N the buoyancy frequency and f the Coriolis parameter. This framework is used to illustrate …

Preface: Special Issue On Turbulence And Mixing In Stratified Flows, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Mixing Rates In Stably Stratified Flows With Respect To The Turbulent Froude Number And Turbulent Scales, Matthew R. Klema, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this analysis the quantification of diapycnal diffusivity Kρ in stratified flows such as those found in the ocean and atmosphere is explored. There are two simplifications that are routinely made when estimating mixing rates in stably stratified flows. First, a constant value is commonly assumed for the (irreversible) mixing coefficient Γ . Second, dissipation rates of turbulent kinetic energy ϵ are inferred using either the Thorpe (or Ellison) length scales or from microstructure measurements using the isotropy assumption. Data from three independent direct numerical simulations of homogeneous stratified turbulence are used as a testbed to highlight impacts of these …

Atomic Insights Into The Structural Properties And Displacement Cascades In Ytterbium Titanate Pyrochlore (Yb2ti2o7) And High-Entropy Pyrochlores, M. Mustafa Azeem, Qingyu Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Pyrochlore oxides ((Formula presented.) are potential nuclear waste substrate materials due to their superior radiation resistance properties. We performed molecular dynamics simulations to study the structural properties and displacement cascades in ytterbium titanate pyrochlore ((Formula presented.)) and high-entropy alloys (HEPy), e.g., (Formula presented.), (Formula presented.), and (Formula presented.). We computed lattice constants (LC) ((Formula presented.)) and threshold displacement energy (Ed). Furthermore, the calculation for (Formula presented.) and ionic radius ((Formula presented.)) were performed by substituting a combination of cations at the A and B sites of the original pyrochlore structure. Our simulation results have demonstrated that the lattice constant is …

Mechanism Underlying Effect Of Expansive Agent And Shrinkage Reducing Admixture On Mechanical Properties And Fiber-Matrix Bonding Of Fiber-Reinforced Mortar, Kamran Aghaee, Taihao Han, Aditya Kumar, Kamal Khayat

Materials Science and Engineering Faculty Research & Creative Works

Expansive agent (EA) and shrinkage reducing admixture (SRA) are utilized to reduce shrinkage and risk of cracking in concrete. EA compensates shrinkage by initial expansion, and SRA reduces surface tension in the pore fluid. Although EA and SRA effectively reduce shrinkage, they can impair micro-structure of concrete at high contents. The shrinkage reduction effect of EA and SRA is well known; however, there is limited knowledge about their negative effect on microstructure and fiber matrix interfacial transition zone (ITZ). The current study explores the effect of using 10 % CaO-based EA, 2 % SRA, and their combination on mechanical, shrinkage, …

Common Ground Newsletter Fall 2023, Missouri University Of Science And Technology

Common Ground

- Free-Format Education

- S&T student selected as national ASCE ambassador

- Heart of a servant

- Exploring history, architecture of Chicago

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …