Architecture Commons^™

Effect Of Displacement Rate On Delamination Growth Rate In Unidirectional Glass Fiber Composites In Both Bridging And Non-Bridging Scenarios, Wafaa Ahmed Shaker, Taher H. Awad, Mostafa M. Elhadary

Mansoura Engineering Journal

Experimentally, the mode I delamination behavior of unidirectional glass/epoxy composites at quasi-static displacement rates of 1, 3, and 5 is explored. When comparing the variation between fracture toughness GIC values at 1 mm/min and GIC at 3 mm/min, the average variation is 30% increasing. However, the average variance in GIC between 3 mm/min and 5 mm/min is increasing by 11%. As a result, the crack propagation velocity has a noticeable effect on the value of GIC at lower speeds and a limited effect at higher speeds. The same comparison is made with bridging specimens for 1 and 3 mm/min displacement …

Evaluating Lidar Technology In Iphone Mobiles For 2d Mapping Applications, Nasr Mohammady Saba, Salem Salama Saleh

Journal of Engineering Research

Abstract- LiDAR (Light Detection and Ranging) technology has revolutionized mapping applications, offering enhanced precision and accuracy in spatial data collection. The integration of LiDAR technology in the latest iPhone models, beginning with the iPhone 12 Pro, has introduced new capabilities for 2D data measurement and plan creation directly on the mobile device. The iPhone 12 Pro and 12 Pro Max models support LiDAR techniques within their mobile phone cameras, enhancing the performance of various applications such as Measurements and Photos. LiDAR operates by emitting pulsed light waves into the surrounding space, which bounce off nearby objects and return to the …

A Value-Based Hbim Framework For Adaptive Reuse Of Heritage Buildings: A Case Study Of Bayt Yakan, Ayman Samy, Alaa E. El-Habashi, Al-Moatazbellah Al-Behiery

Journal of Engineering Research

This paper presents a value-based Heritage Building Information Modeling (HBIM) framework for assessing the adaptive reuse of heritage buildings. The framework integrates key heritage values criteria -authenticity, integrity, significance, and adaptability- into HBIM, allowing for structured decision-making that balances heritage preservation with contemporary operation. Using Multi-Criteria Decision Analysis (MCDA), different adaptive reuse scenarios are evaluated in HBIM Environment to ensure that interventions respect the building's authenticity, integrity, and significance while meeting sustainable operational needs. The case study focuses on Bayt Yakan, a 17th-century heritage building in Cairo, where three adaptive reuse scenarios—continued use as a library, conversion into a hotel …

Experimental And Numerical Investigation For Optimum Design Of Hydraulic Steel Gates, Basma Hassan Mohamed Eng, Ahmed Mohamed Anwer Dr, Hanan Eltobgy Prof., Gamal Helmy El-Saeed Prof

Journal of Engineering Research

Conventionally, steel gates are widely used in hydraulic structures for their superior mechanical properties in sustaining hydrostatic pressure. Maintenance and operational costs should be considered while studying the feasibility of these gates. In the current research, three prototype steel gates with different configurations were prepared and examined experimentally. The three gates have the same surface dimensions of (width x height) equal to (1.0 x 1.25 m). The first steel gate represents a typical traditional gate made of skin plate and stiffened laterally using standard steel channels and will be kept for comparison. The second gate represents a standard thicker plate …

Performance And Emissions Characteristics Of Multi-Cylinder Direct Injection Diesel Engine Fuelled With Diesel/Biodiesel And Toluene Additives, Hagar Alm-Eldin Bastawissi, Medhat Elkelawy Prof. Dr. Eng., Mohammed Osama Elsamadony Dr. Eng., Moustafa Ghazaly Eng.

Journal of Engineering Research

This study explores the impact of using a diesel, biodiesel, and toluene additive fuel blend in a multi-cylinder direct injection diesel engine, focusing on both performance and emissions characteristics. Biodiesel, made from renewable sources like vegetable oils, is often added to diesel to reduce reliance on fossil fuels and improve combustion due to its higher oxygen content. In this work, a 45% biodiesel blend (B45) led to significant reductions in particulate matter (PM) emissions by up to 40% compared to conventional diesel. Additionally, carbon monoxide (CO) and hydrocarbon (HC) emissions decreased by up to 30% and 25%, respectively, due to …

Effect Of Dual-Fuelled Cng And Gasoline On Spark Ignition Engine Performance And Emissions Behaviors At Different Loads, Medhat Elkelawy Prof. Dr, Eng., M.M. Bassuoni Prof. Dr., Hagar Alm-Eldin Bastawissi, Saied I. Haiba Eng.

Journal of Engineering Research

Engine emissions are one of numerous factors that have detrimentally affected the environment, such as global warming, which is the result of growing exhaust gases, practically carbon dioxide (CO2). These emissions have substantially influenced researchers to develop strategic initiatives to minimize the carbon contents of fuels. The purpose of this research is to investigate the characteristics of internal combustion (SI) engines fueled by gasoline and compressed natural gas (CNG) blends. The experiments are performed using a HONDA 4-stroke, single-cylinder, and air-cooled SI engine. Five CNG concentrations are evaluated, the concentrations range from 0.5 to 2.5 L/min with a 0.5 L/min …

A Quantitative Analysis Of The Commercial-Additive Effects On Diesel Engine Combustion And Emissions Characteristics, Medhat Elkelawy Prof. Dr. Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mahmoud Mohamed Soliman Mahmoud Mohamed Mahmoud Soliman

Journal of Engineering Research

Petroleum fuel prices fluctuate in response to global political and economic issues. Government regulations should be followed when it comes to engine emissions, as these dangerous pollutants have a negative impact on the environment. One such effect is global warming, which raises global temperatures. The purpose of this study is to develop the additives for use as a fuel mix with diesel fuel, which will be used to feed the diesel engine of a single cylinder, four strokes. The engine will be tested experimentally with varying loads at fixed speed of 1500 rpm, using blends of [(5% PRETSONE additive + …

Design And Implementation Of A Low-Cost Educa-Tional Robot For Engineering Curriculums, Diana Refaat Henry Jacob, Ashraf Mohamed Hafez, Mohamed Tarek Elawa

Journal of Engineering Research

The role of educational robots is becoming increasingly important. Many commercial educational robots differ in their abilities and price. In general, the cost of these robots presents the main cause of their limited use in the teaching process, especially in countries with limited financial resources. This work attempts to solve this problem by designing and implementing an educational robot with a limited budget. The robot was initially intended to serve higher education students' needs, especially in engineering curriculums but can be extended to other application areas. This work presents robot hardware functional blocks, mechanical struc-ture design, and 3D printing implementation. …

A Standardized Approach For Measuring The Quality Of Urban Life In New Urban Communities Case Study: New Damietta City, Egypt, Raghda Abdelkader Mahmoud, Sherif Ahmed Sheta, Esraa Mohamed El-Azab, Ahmed Mohamed Thabet Alieldin

Journal of Engineering Research

New urban communities aim to achieve a clear societal vision through the promotion of urban development and improving their efficiency to suit human life with its various requirements. Therefore, the quality of life standards can be adopted to reflect their indicators positively on individuals and communities under their organizational, development strategies, and development plans that are leading to the Egyptian society’s prosperity. In this context, the aim of the research is to investigate and analyse the quality of urban life with the identification of its effective and efficient indicators for the study area. Furthermore, the research intends to provide …

A Greening The Diesel: Vegetable Oil Biodiesel Blends For Cleaner Emissions And Improved Direct Injection Diesel Engine Performance, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, E. A. El Shenawy Prof. Dr., Mustafa Mohamed Ouda

Journal of Engineering Research

In this study, we conducted comprehensive experiments to assess and compare the performance of pure diesel fuel against biodiesel produced from corn oil in various blend ratios (15/85, 30/70, 45/55, and 60/40) in a conventional four-stroke, direct-injection diesel engine, fuel is injected directly into the combustion chamber at the end of the compression stroke, allowing for efficient combustion and power generation over four distinct phases: intake, compression, power, and exhaust. Each fuel blend was tested at an engine speed of 16,000 rpm across different load conditions (low, medium, and high). Key performance metrics, including volumetric fuel consumption, exhaust smoke, and …

Evaluating Energy Efficiency And Thermal Performance In Egypt’S Social Housing: Climate-Responsive Design And Material Impact In Hot Desert Environments, Ahmed M. Hanafi, Mohamed A. Moawed, Osama E. Abdullatif

Journal of Engineering Research

As Egypt's urban areas expand rapidly, the demand for energy-efficient, affordable housing in extreme hot desert climates has become increasingly urgent. This study investigates the energy efficiency and thermal performance of Egypt’s Social Housing Project, with a focus on residential building in New Aswan City, where summer temperatures frequently exceed 45°C. Employing a validated energy model, this research simulates annual energy consumption for the building, which comprises 24 residential units, each approximately 86 m². The model integrates realistic occupancy schedules, region-specific weather data, and common household behavior patterns to closely reflect actual energy usage. Findings indicate a high alignment between …

Perspectiva De Género En La Animación: Desafíos Y Logros En La Industria, Carmen Pérez González, Luis Mayo Vega

GDI. Revista de investigación de Género, Diseño e Innovación

La perspectiva de género en la industria de la animación se centra en los desafíos y logros que enfrentan las mujeres en este campo. Se identifican los principales obstáculos que afrontan las directoras de animación, evidenciando un aumento en la representación femenina a lo largo de los años, aunque aún lejos de alcanzar la igualdad. Se destaca la importancia de incluir voces femeninas en la investigación académica para promover una representación equitativa. La metodología analiza informes recientes que evalúan la participación de mujeres en la industria y se recopilan recomendaciones de directoras destacadas para fomentar la equidad de género. Los …

An Impact Analysis Of The 15-Year Capital Program And Budget In The City Of Philadelphia, James K. Lewis

West Chester University Doctoral Projects

Abstract

In order to serve its constituents, the City of Philadelphia has established numerous public service departments and respective public goods in terms of departments facilities and other structures to provide public service. The key departments include the Police Department, Fire Department, Health Department, Libraries, and Parks and Recreation. Additionally, there are departments established to build, renovate, maintain, the public goods provided by the City of Philadelphia in order to achieve successful stewardship of the facilities. In order to carry out facilities stewardship of its public goods, the City has a long-term capital program and budget that utilizes borrowed capital …

An Experimental Study On Durability Properties Of Reactive Powder Concrete Containing Silica Fume And Fly Ash As Supplementary Cementitious Materials, Ayat Mohamed Hassan Taha, Mohamed Hussain Ali Makhlouf, Khaled Mohamed El-Sayed, Gamal Ismaail Khaleel

Mansoura Engineering Journal

The paper reports the influence of using silica fume (SF) and fly ash (FA) as supplementary cementitious materials (SCMs) on the durability properties of reactive powder concrete (RPC), focusing on sorptivity, ultrasonic pulse velocity (UPV), and carbonation depth. The study additionally compares the performance of RPC with highstrength concrete (HSC) to assess the relative benefits of RPC. A total of 19 mixtures, including 17 RPC and 2 HSC mixtures, were evaluated. Parameters such as volume of binder content (45%, 50%, 55%, and 60%), water-binder ratios (20%, 25%, and 30%), and SCM proportions (0%, 10%, 20%, and 30%) were varied; these …

Optimization Of Persulfate Activation System Using Ferrous Sulfate For Toc Removal From Real Domestic Wastewater, Mohamed Fouad, Mohamed Mossad, Mohamed Gar Alalm, Mahmoud Samy

Mansoura Engineering Journal

The reuse of treated wastewater is increasingly recognized as a sustainable solution to address global water shortage. This study investigates the effectiveness of a persulfate-based advanced oxidation process (AOP) using sodium persulfate (Na2S2O8) activated by ferrous sulfate (FeSO4) as a tertiary treatment for secondary effluents. Real municipal wastewater was collected from Agouzain Wastewater Treatment Plant (WWTP) in Kafr El-Sheikh, Egypt. A Box Benkhen design (BBD) was employed to optimize three key variables: FeSO4 dose (0.5–2.0 g/L), Na2S2O8 dose (0.5–2.0 g/L), and pH (3.0–9.0), with total organic carbon (TOC) removal as the main response. Under optimized conditions (0.50 g/L FeSO4, 2.00 …

Adaptation For Whom? Understanding The Impacts Of Dyke Policies On Small-Scale Farmers In Ca Mau Province Of Vietnam, Nguyen Minh Quang, Nguyen Van Minh, Nguyen Vo Chau Ngan, Martha B. Lerski

Publications and Research

Low-lying deltas worldwide are extremely vulnerable to sea-level rise. As the risks of climate-induced flooding become increasingly clear, the thirst for infrastructure-driven adaptation increases. This highlights a patent need to understand the impacts of engineering adaptation solutions, especially those targeting built structures such as dykes and sluices, on farmers from a bottom-up, farmer-centred perspective. The study addresses this call by examining cases where dyke policies, while successful in some dimensions, have undermined small-scale farmer livelihoods in Ca Mau ― Vietnam’s southernmost rural province. It identifies areas in need of attention and adds empirical data related to this group of farmers. …

Understanding Roof Systems Of Metal Buildings, Michael W. Seek, Vincent E. Sagan

Engineering Technology Faculty Publications

[Introduction] A metal building is a system with complex behavior that, when properly accounted for, provides an efficient structural solution. To help the engineer properly design for this behavior, the Metal Building Manufacturers (MBMA) has recently released the Roof Framing Design Guide for Metal Building Systems, 2nd Edition (Roof Framing Design Guide).

Developing Entrepreneurial Mindsets In Construction Management Through Experiential Projects, Dalya Ismael

Engineering Technology Faculty Publications

Entrepreneurial Minded Learning (EML), a framework supported by the Kern Entrepreneurial Engineering Network (KEEN), promotes critical thinking and innovation by encouraging students to explore real-world problems through the 3Cs: Curiosity, Creating Value, and Connections. In construction management education, the focus often remains on technical skills and project execution, neglecting the development of entrepreneurial skills like adaptability, value creation, and stakeholder engagement, leaving a gap in preparing students for the challenges of the industry. To bridge this gap, micro-moment activities were introduced prior to the main project to prime students for EML-based thinking. These short, focused exercises encouraged students to solve …

Sustainable Hospitals Lighting Design Optimization To Enhance Patient Well-Being, Merna R. Ashac, Rania F. Ismail, Nasreen Fathy Abdelsalam

Mansoura Engineering Journal

This research investigates the critical role of lighting design in hospitals environments, focusing on its impact on patient outcomes and environmental sustainability. By integrating energy-efficient LEDs and natural light, the study aims to enhance patient well-being and staff performance. To achieve this, the research explores aligning artificial lighting with circadian rhythms to improve both patient outcomes and staff performance. Using mixed-methods approach, the research includes a literature review, case studies, and analysis using DIALux simulation software. The literature review achieves a framework for sustainable, human-centric lighting, while case studies provide practical insights into effective designs in patient rooms. DIALux simulations …

Evaluating Machine Learning Techniques For Breast Cancer Detection: A Comprehensive Review, Owen Kresse, Youssef Kamel Kamel Hassan Rezk, Alaaelddin Ibrahim Said, Rana Hossameldin Mousa, Merna Adel Abdelrahman Ibrahim, Ahmed Fathy Sweed, Tomas Pegorari, Pablo Nakasato, Ainhoa Osa-Sanchez, Itxasne Del Barrio, Francesc Serra Crespí, Keltse Santisteban Ortiz, Naiara Melián Eguia, Mohamed Elsharkawy, Ibrahim Abdelhalim, Begonya Garcia-Zapirain, Ayman El-Baz

Mansoura Engineering Journal

Breast cancer is considered one of the most common types of cancer among women. significant amount of effort done in early detection to increase survival chance since early detection is a challenging task especially in certain breast cancer conditions or using inefficient imaging modalities AI demonstrated significant potential in breast cancer detection algorithms including convolutional neural networks (CNNs) and Transformers, which have achieved highly accurate results but they have some limitations, such as the large amounts of data required for training as CNNs rely on local features, while Transformers focus on global features However, recent research has proposed hybrid models …

High Voltage Circuit Breaker Arc Modelling State Of Art, Raghdaa I. Elbahy, Ahmed M. Abdelbaset, Ebrahim A. Badran, Mansour H. Abdel-Rahman

Mansoura Engineering Journal

High-voltage (HV) circuit breakers (CBs) are critical for safe and reliable power system operation. However, electric arcs formed during current interruption pose a challenge due to their complex, non-linear behavior. These arcs can hinder CB efficiency and cause equipment damage. To address this, understanding and modeling arc properties are essential. This paper explores existing methods for modeling and simulating electric arcs in HV CBs, including physical, black box, and parameter models. By analyzing these approaches, the paper emphasizes the importance of arc modeling for CB optimization and outlines the physical, mathematical, and software requirements for effective modeling and simulation.

Ansi Z97 Impact Testing Of Thin Glass, Justin P. Anthony

Dissertations, Master's Theses and Master's Reports

To determine whether thin glass constructions can pass Z97 impact test to qualify as safety glass an extensive protocol was performed. Constructions including monolithic, chemically strengthened, filmed, laminated, and triple pane insulated glass units comprised of thin glass ranging in thickness between 0.50 mm and 1.6mm were evaluated. Test results indicate annealed specimens, and laminated specimens performed similar to constructions with 3 mm and 6 mm glass. Specimens with 0.2 mm film consistently performed as safety glass for thicknesses between 0.7 mm and 1.6 mm and similar performance for specimens with 0.1 mm film with thickness of 1.1 mm and …

From Equitable Access To Equitable Usage: Moving Towards Data-Driven, Evidence-Based Cycling Assets Management, Kewei Ren, Yunping Liang, Chun-Hsing Ho

Durham School of Architectural Engineering and Construction: Faculty Publications

Cycling is increasingly recognized for its wide range economic, environmental, and health benefits as a mobility option. However, disparities in the provision and the quality of bicycle infrastructure persists. Ensuring fair access and usage of these benefits for all presents a significant challenge. As a result, establishing effective methodologies to evaluate cycling equity is critically important. This paper synthesizes research on infrastructure asset management with a focus on equity considerations in bicycle infrastructure. A systematic review of 19 North American studies critically examines how existing research categorizes vulnerable populations and assesses fairness. The results reveal that most existing analyses focus …

Green Project Finance For Infrastructure And Building Construction: Instruments And Benchmarks, Yunping Liang

Durham School of Architectural Engineering and Construction: Faculty Publications

It is counterintuitive that both the practice and research on green project finance for infrastructure and building construction are ascendant and still have limited precedents, considering that individually, the two parts (i.e., project finance and sustainability in the built environment) are both familiar to the communities. To narrow the gap and facilitate the financing of the built environment’s sustainable transformation, this study systematically reviews the common instruments for financing green infrastructure and building projects. Benchmarking questions distinguishing the profile of green project finance from common construction project finance are developed based on the literature review and then are used for …

The Impact Of 'Decent Life' Initiative On Sustainable Urban Development: Abu Galal Village In Egypt As A Case Study, Sally Hassan Abd-Elazim, Sherif Ahmed Sheta, Medhat Ahmed Shaban

Mansoura Engineering Journal

The “Decent Life” Initiative aims to enhance living conditions and support sustainable urban development in Abu Jalal village, Sherbin city, Dakahlia Governorate, Egypt. The research aims to assess the effectiveness of the 'Decent Life' initiative in promoting sustainable urban development in Egyptian villages, focusing on improving its mechanisms for future use and maximizing benefits in other villages facing similar challenges.. The research employs various methods, including surveys and questionnaires targeting local residents, evaluation based on SDG 11, and GIS software for spatial analysis. Research identifies key areas of improvement across housing, healthcare, transport, education, infrastructure, job opportunities, disaster resilience, waste …

Computer Aided Detection System For Liver Cancer Using Computed Tomography Images Based On Artificial Intelligence, Noha Saad Badrawy, Hanan M. Amer, Apeer T. Khalil

Mansoura Engineering Journal

The prevalence of liver cancer has surged in Egypt and worldwide, leading to increased use of AI for tumor detection and diagnosis. The objective is to boost accuracy and minimize errors in manually classifying liver images, a task that is laborious and time-consuming. This study seeks to create a high-performance system for detecting liver tumors in Computed Tomography "CT" scans, utilizing Convolutional Neural Networks "CNNs" and machine learning, which are prevalent in biomedical imaging. With a dataset of 9,255 CT images, the research involves three steps. First, three deep learning models are compared: that Liver Tuned High-Resolution Network (LTHR-Net), Deep …

Lilly Reich: La Mente Detrás Del Mobiliario Moderno Que La Historia Olvidó, Noa Llanas Angrill

GDI. Revista de investigación de Género, Diseño e Innovación

La historia ha sido escrita desde una perspectiva que se ha invisibilizado las contribuciones femeninas en su desarrollo. Este artículo se centra en Lilly Reich (1885-1947), figura clave del diseño moderno, cuya autoría ha sido eclipsada por la de su colaborador Ludwig Mies van der Rohe. La investigación evidencia que la diseñadora no solo contribuyó al diseño de mobiliario moderno y de espacios expositivos, sino que lideró proyectos clave y que su trabajo ha impactado en el diseño expositivo, textil y mobiliario moderno.

Optimized Vgg16 For Multi-Class Classification Of Alzheimer's Disease, Amira M. Basuoni, Hussein Seleem, Amira S. Ashour

Mansoura Engineering Journal

Alzheimer’s disease (AD) is a severe neurological disorder that leads to memory loss and other cognitive impairments, ultimately resulting in death. With the advancement of deep learning, several researchers implemented a deep learning (DL)-based classification system for diagnosing such disease. However, determining the proper setting of the parameters, like learning rate and the number of dense units in the classification model is essential to achieve the best performance. Although manual tuning and grid search methods may be used, they are often time-consuming and cannot achieve the optimal model’s design. Accordingly, this paper proposed an improved model of the Visual Geometry …

A Generalized Form To Some Classes Of Special Functions With Applications, I. L. El-Kalla, R. A. Abd El-Monem

Mansoura Engineering Journal

Based on El-Kalla expansion theorem in [1], this paper introduces a new form of special function. Through this new form, some new results are obtained and the results in the literature are confirmed. The new function is simple in computations, and it could be used to solve some classes of integral equations.

Incremental Metal Forming Of Functionally Graded Aluminum-Copper Composites: A Numerical Investigation By Finite Element Analysis, Abdallah A. Elsherbiny, Tawakol A. Enab, Abdelkhalik Eladl

Mansoura Engineering Journal

Manufacturers aim to produce high-quality, cost-effective products through advanced material forming techniques. This study utilized ABAQUS® software to present and evaluate a finite element model for the incremental forming process of a functionally graded aluminum-copper material (Al-Cu FGM). The developed model incorporated the Lagrangian dynamic framework and the Johnson-Cook constitutive equation. The model enabled accurate estimation of forces, stress, and strain distributions during the incremental forming process of an Al-Cu FGM. The results demonstrated that the algorithm effectively predicted these critical characteristics, which are significant for optimizing manufacturing processes. Although the model successfully replicated the material's stress responses, further refinement …