Digital Commons Network^™

Transferring Writing Skills To A 3rd Grade Music Classroom, Megan A. Wilson

Masters Theses

The purpose of this action research study was to examine the use of writing skills in a third grade general music classroom. Students wrote narratives based on music they heard, used an interactive notebook to reflect on musical experiences, conducted a short composer research project and wrote a biography about the composer. The study was designed to investigate the following research question: Will the use of writing in the music classroom help the students apply writing skills from their general education classes while learning music content? The duration of the study was for an entire semester and the students attended …

Development Of Learning Objectives For An Undergraduate Computer-Aided Drafting And Design Animation Using The Delphi Technique, Gavin M. Wilk

Masters Theses

This study reflects on learning objectives created for an advanced computer aided drafting (CAD) learning module(s) or course with the emphasis on simulation and engineering animations. These objectives were derived by using the Delphi technique by access the support of a panel of subject matter experts (SME) from academia and industry that are interested in CAD. The results of this study are intended for the use of creating instructional modules for undergraduate studies.

A panel of experts were chosen through an electronic listserv of engineering and technology supporters. Two rounds of two different Delphi survey instruments were utilized to complete …

A Summer Bridge Program's Impact: Social Engagement And The Building Of Self-Efficacy, Stephen L. Roach

Masters Theses

This two phase study sought to investigate the impact that a summer bridge program (SIHL) at a midsized, public institution at had on participants' academic success through an examination of its effect on their self-efficacy. In addition, this study sought to gain an increased understanding of how the program impacted self-efficacy, by providing a new conceptual model for examining the program and similar programs. Lastly, this study expanded on the research conducted by Lucas (2012), by incorporating both quantitative and qualitative methods. Participants in Phase 1, the quantitative phase, were 322 students of varying ages, races and ethnicities, genders, and …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …

An Imu-Based Spacecraft Navigation Architecture Using A Robust Multi-Sensor Fault Detection Scheme, Samuel J. Haberberger

Masters Theses

"Redundant sensor networks of inertial measurement units (IMUs) provide inherent robustness and redundancy to a navigation solution obtained by dead reckoning the fused accelerations and angular velocities sensed by the IMU. However, IMUs have been known to experience faults risking catastrophic mission failure creating large financial setbacks and an increased risk of human safety. Different fusion methods are analyzed for a multi-sensor network using cost effective IMUs, including direct averaging and covariance intersection. Simulations of a spacecraft in low Earth orbit are used to baseline a typical expensive IMU and compare the navigation solution obtained from a network of several …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

Paleogeogra Detrital Zircon Geochronology Of Upper Cambrian To Lower Mississippian Siliciclastic Strata Of The Ozark Dome And Vicinity, Bing Li

Masters Theses

"Siliciclastic strata exposed in the Ozark Dome provide Late Cambrian to Late Cretaceous snapshots of an evolving paleogeology and regional to far-field tectonic events. U-Pb ages of detrital zircons from the arkosic base of the Upper Cambrian Lamotte Formation reflect first cycle derivation from the adjacent ca. 1.31-1.48 Ga Granite-Rhyolite province, with subsidiary input from ca. 1.6-1.7 Ga Mazatzal basement. Feldspathic arenites near the top of the Lamotte Sandstone also contain significant quantities of detrital zircon grains of these ages, with additional peaks centered at ca. 2.7 and ca. 1.1 Ga, signaling the onset of extra-regional detrital input most likely …

Pricing Of Geometric Asian Options In General Affine Stochastic Volatility Models, Johannes Ruppert

Masters Theses

"In this thesis, we look at the general affine pricing model introduced in [11]. This model allows to price geometric Asian options, which are of big interest due to their lower volatility in comparison to, for example, European options. Because of their structure and in order to be able to price these options, we look at the basic theory of Lévy processes and stochastic calculus. Furthermore, we provide the detailed description of the parameters of the pricing formulas for some popular specific single-factor stochastic volatility models with jumps and generalize the approach of [11] to multi-factor models"--Abstract, page iii.

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …

Gravity And Magnetic Investigations Of The North-Eastern Kansas Section Of The Midcontinent Rift System, Ozgun Kamil Sahin

Masters Theses

"The Midcontinent Rift System (MRS) is a major Precambrian magmatic province on the North American continent. It formed when the North American craton began to split apart during the Mesoproterozoic era (1,100 Ma). As a result of the extension and possibly the effects of a rising mantle plume, a thick layer of basalt and numerous reverse and normal faults were formed. The basalt layer is buried below sedimentary formations and makes it difficult for seismic techniques to image. On the other hand, gravity and magnetic methods can be utilized for focused depths, and the basalt layer of the system can …

Mechanics Of Impulse Force Reduction For Mitigating Dump Truck Vibrations Under Hislo Conditions, Danish Ali

Masters Theses

"The deployment of large capacity shovels and dump trucks, for achieving economic bulk production capacities, has resulted in high impact shovel loading operations (HISLO). These large shovels generate high impact forces when loading dump trucks with over 100-ton passes under gravity. The impact forces also generate high frequency shock waves, which cause severe truck vibrations, and thus, expose dump truck operators to high levels of whole body vibrations (WBV). The dynamic impact force generates these vibrations, and thus, there is a need to develop efficient technologies to eliminate or reduce its impact. Existing literature and industry practice show that this …

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …

The Mantle Transition Zone Beneath South America From Stacking Of P-To-S Receiver Functions, B. A. Goetze

Masters Theses

"The Mantle Transition Zone (MTZ) beneath South America is investigated with stacking of Receiver Functions (RFs) of converted P-to-S phases from the velocity discontinuities at 410 km (d410) and 660 km (d660). A total of 785 seismic stations provided 22,235 high quality RFs, allowing 1,717 MTZ thickness measurements in circular bins of 2⁰ radius. An apparent MTZ structure is derived using the IASP91 reference model, where the d410 mean depth is 409.1 km and the d660 is 661.5 km, and the mean MTZ thickness is 251.8 km. This model presents coherent depressions and uplifts of the discontinuities matching well known …

Effect Of Sparse-Build Internal Structure On Performance Of Fused Deposition Modeling Parts, Shixuan Meng

Masters Theses

"Fused deposition modeling (FDM) technology has been used in additive manufacturing for years and is able to significantly reduce both manufacturing time and cost for production tooling and end-use parts. Autoclave molding is one of the conventional tools used to produce composite parts. In autoclave molding, the soft composite material is positioned on the molding tool, and then subjected to vacuum and elevated temperatures to facilitate the curing of the resin. With additive manufacturing (AM), it is possible to fabricate the molding tool with a sparse internal structure, thereby reducing the fabrication time and cost compared to a solid tool. …

Measurements And Simulation Of Conductor-Related Loss Of Pcb Transmission Lines, Oleg Kashurkin

Masters Theses

"With continuously increasing data rates Signal Integrity (SI) problems become more and more challenging. One of the main issues in high-speed data transfer is the frequency-dependent loss of transmission lines. This thesis is dedicated to conductor-related loss mechanisms in printed circuit board (PCB) transmission lines.

This thesis provides the experimental investigation of conductor properties used for fabrication of PCBs. Particularly, the resistivity and conductivity along with the temperature coefficients of eleven copper types is measured and reported. A four probe measurement technique is used. Results were verified by two independent measurements and show discrepancy of less than 0.5%.

Another major …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Application Of Embedded Frequency Selective Surfaces For Structural Health Monitoring, Dustin Franklin Pieper

Masters Theses

"This thesis proposes the use of Frequency Selective Surfaces (FSSs) as an embedded structural health monitoring (SHM) sensor. FSSs are periodic arrays of conductive elements that filter certain frequencies of incident electromagnetic radiation. The behavior of this filter is heavily dependent on the geometry of the FSS and local environment. Therefore, by monitoring how this filtering response changes when the geometric or environmental changes take place, information about those changes may be determined. In previous works, FSS-based sensing has shown promise for sensing normal strain (a stretching or compressing geometrical deformation). This concept is extended in this thesis by investigating …

A Cost Benefit Analysis Of Sst Based Volt-Var Control, Guruprasad Ramani

Masters Theses

"The overall objective of this thesis work is to improve system power quality with the help of solid state transformers (SSTs). Two methods to improve the system power quality are explored: a) achieving a unity power factor at all the load buses, and b) improving the system voltage profile to meet a desired voltage regulation requirement of 0.95

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

On The Double Chain Ladder For Reserve Estimation With Bootstrap Applications, Larissa Schoepf

Masters Theses

"To avoid insolvency, insurance companies must have enough reserves to fulfill their present and future commitment-refer to in this thesis as outstanding claims towards policyholders. This entails having an accurate and reliable estimate of funds necessary to cover those claims as they are presented. One of the major techniques used by practitioners and researchers is the single chain ladder method. However, though most popular and widely used, the method does not offer a good understanding of the distributional properties of the way claims evolve. In a series of recent papers, researchers have focused on two potential components of outstanding claims, …

Reprocessing And Structural Interpretation Of Multichannel Seismic Reflection Data From Penobscot, Nova Scotia, Fulya Gizem Yagci

Masters Theses

"Penobscot area is located in the Scotian Basin, which was occurred as a result of extension in the eastern North America border. 2-D data set that was utilized for the study consists of three multichannel seismic profiles that were collected from Penobscot Parcel 8. The main purpose of the study was to enhance signal-to-noise ratio of the seismic reflection sections suppressing high frequency noise and multiples, and removing diffractions. In addition, while the resolution of the sections were enhanced, determining the correct processing techniques and parameters for better results was the another important criteria.

The processing steps included deconvolution, minimum …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …

Automated Design Of Boolean Satisfiability Solvers Employing Evolutionary Computation, Alex Raymond Bertels

Masters Theses

"Modern society gives rise to complex problems which sometimes lend themselves to being transformed into Boolean satisfiability (SAT) decision problems; this thesis presents an example from the program understanding domain. Current conflict-driven clause learning (CDCL) SAT solvers employ all-purpose heuristics for making decisions when finding truth assignments for arbitrary logical expressions called SAT instances. The instances derived from a particular problem class exhibit a unique underlying structure which impacts a solver's effectiveness. Thus, tailoring the solver heuristics to a particular problem class can significantly enhance the solver's performance; however, manual specialization is very labor intensive. Automated development may apply hyper-heuristics …

Study Jitter Amplification Of A Passive Channel And Investigation Of S₂₁ Magnitude Extraction Methodologies Using A Pattern Generator And Oscilloscope, Xinyun Guo

Masters Theses

"Recently the clock channel jitter amplification has been observed in several publications. Currently in many high-speed I/O systems, to avoid the cost and the complex clock recovery circuit design, people use traces forwarding clock signal from transmitting IC to receiving IC. When these clock traces are long enough, the amount of attenuation will induce not only inter-symbol-interference (ISI) but also modulate with the input jitter. Eventually it will lead some type of jitter been amplified after the channel. Similarly, the high speed communication channel (data channel) will also face this issue. Since there are no studies on the jitter amplification …

Intensity Control Of Dielectric Barrier Discharge Filaments, Matthew Crawford Paliwoda

Masters Theses

"When operated in a filamentary mode, a volume dielectric barrier discharge (DBD) is known to produce patterned plasma structures. These structures are currently being explored for reconfigurable metamaterial applications. In this work the presence and intensity of a single filament, within an array of filaments, was controlled by adjusting the voltage to that filament's individual needle electrode. The current, voltage, and time-averaged normalized light intensity were measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD in air, the needle-controlled filament intensity varies from that of the surrounding filaments to zero …

A Linear Matrix Inequality-Based Approach For The Computation Of Actuator Bandwidth Limits In Adaptive Control, Daniel Robert Wagner

Masters Theses

"Linear matrix inequalities and convex optimization techniques have become popular tools to solve nontrivial problems in the field of adaptive control. Specifically, the stability of adaptive control laws in the presence of actuator dynamics remains as an important open control problem. In this thesis, we present a linear matrix inequalities-based hedging approach and evaluate it for model reference adaptive control of an uncertain dynamical system in the presence of actuator dynamics. The ideal reference dynamics are modified such that the hedging approach allows the correct adaptation without being hindered by the presence of actuator dynamics. The hedging approach is first …

Design And Analysis Of An Axisymmetric Aerospike Supersonic Micro-Nozzle For A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Abdalla Ali Bani

Masters Theses

"The cold-gas propulsion system being developed by M-SAT requires improvements to its original nozzle design. This study documents the research, design, and analysis of a supersonic plug nozzle concept that could be integrated to the refrigerant-based cold-gas propulsion system to possibly improve its performance. As documented in this thesis, CFD analysis showed that the outlined nozzle design method resulted in a feasible nozzle concept that has the ability to out-perform a conventional nozzle of the same area ratio. The flow-fields and thrust of the aerospike nozzle, for the full and truncated nozzles, were investigated. The purpose of this study is …

Voltage Control In A Distribution System Using Active Power Loads, Mounika Chava

Masters Theses

"High penetration of renewable energy resources such as rooftop solar photovoltaic (PV) systems is exacerbating violations of the voltage limits in power distribution networks. Existing solutions to these over-/under-voltage issues include tap-changing transformers and shunt capacitors. However, tap changers only allow voltage changes in discrete steps and shunt capacitors cannot handle over-voltage situations. To overcome these problems, this thesis proposes voltage control in a distribution system by adjusting active power loads. The proposed solution can be used for both under- and over-voltage cases at any levels of voltage adjustment. First, the active power that needs to be adjusted at selected …

An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding

Masters Theses

"Micrometer-size particle gel (microgel) has been developed and successfully applied to improve conformance in mature reservoirs. However, quite few researches have been published to address on their effect on oil recovery and rock permeability modification.

This work conducted a series of core flooding experiments to investigate the injectivity, plugging efficiency and improving oil recovery potentials of a couple of microgels synthesized in our lab.

First, this work studied the impact of permeability and crosslinker concentration on PAM type microgel treatment. Results shows that microgel treatment would have a less plugging efficiency in lower permeability rocks, which could be caused by …