Digital Commons Network^™

Sensitivity Analysis Of Geomechanical Parameters In A Two-Way Coupling Reservoir Simulation, Hector Gabriel Donoso

Masters Theses

"Currently reservoir simulators model geomechanical effects such as compaction, subsidence, fault reactivation, breach of the seal integrity, etc. using only the rock compressibility to change the pore volume. However, rock compressibility as a scalar quantity is unfit to represent the true rock mechanics in the reservoir. In order to accurately represent geomechanical effects in a reservoir simulation, a two-way coupling simulation of the stress analyzer and the reservoir simulator was done. Based on the poroelasticity theory during the production or depletion of the reservoir the porosity and permeability changed due to the stress or pore pressure changes.

A sensitivity analysis …

Single Phase Gas Flow Response Of Fractured Horizontal And Vertical Wells To Repeated Production, Divya Kandlakunta

Masters Theses

"Historically, the conventional approach to well production has been to produce continuously, minimizing interruptions to flow insofar as possible. Yet some operators have observed improved well flow rates and ultimate recovery after a significant well shut-in periods. These production increases have not been documented. This study investigates the production impact of cyclic production/shut-in on fractured vertical and horizontal gas well performance.

A numerical reservoir model in Stimplan software was used to model production in fracture stimulated vertical and horizontal gas wells. Reservoir permeability is varied over a range of 0.0001 md to 1 md, and the shut-in period was varied …

Protection Of A 138/34.5 Kv Transformer Using Sel 387-6 Relay, Aamani Lakkaraju

Masters Theses

"Schweitzer Engineering laboratories (SEL) donated the SEL 387, SEL 311L, and SEL 351S relays and the SEL AMS to Missouri University of Science and Technology. This thesis documents the demonstration approach to set the SEL 387 relay to protect a grounded wye-grounded wye transformer and then test these settings by injecting fault currents into the relay using the SEL AMS. This thesis explains the approach to set the differential element of the SEL 387 relay to protect a transformer against internal faults and the overcurrent element of the SEL 387 relay to protect transformer against external faults. A radial power …

Periclinal Folding In Ozark Plateau: A Record Of Local Karst Collapse Or Regional Tectonic Forces?, Chao Liu

Masters Theses

"The Ordovician Rubidoux Formation of the Ozark Plateau, Missouri is typically identified as mechanically competent sub-horizontal beds of medium grained sandstone. North of Licking, MO, the Rubidoux Formation was deformed into a series of dome-and-basin shaped buckle folds, exposed in road cuts over a distance of ~10 km. Such folds are highly unusual within the Ozark Plateau and their origin remains controversial. Three major hypotheses have been proposed based on field observations and stereographic analysis. Given the pervasive distribution of karst collapse throughout Missouri, one hypothesis to explain these folds is that the Roubidoux Formation sagged into collapsed caverns. A …

Origin Of Lacustrine Carbonate-Dominated Clinoforms In The Lower-Permian Lucaogou Low-Order Cycle, Southern Bogda Mountains, Nw China, Yiran Lu

Masters Theses

"Lacustrine carbonate clinoforms deposit can reflect ancient lake condition like paleoclimate and lake type. Complex lithofacies of a carbonate-dominated clinoform package in lower Permian Lucaogou low order cycle, Bogda Mountains, NW China, provide clues on clinoform-forming processes in a half-graben lake. The clinoform package is ~5.2 m thick, prograding from S to N for ~200 m with a maximum 15o dip angle, and spans ~4 km laterally. A clinoform consists of a lower siliciclastic-rich and an upper carbonate-rich beds, forming a clinoform cycle. Results of petrographic study of 30 thin sections suggest that the clinoform package is composed of mixed …

Hidden Markov Model Based Non-Intrusive Load Monitoring Using Active And Reactive Power Consumption, Paulomi Nandy

Masters Theses

"This work presents a residential appliance disaggregation technique to help achieve the fundamental goal in Non-Intrusive Load Monitoring (NILM) problem i.e. simple breakdown of energy consumption based on the appliance type in a household. The appliances are modeled using Hidden Markov Model by utilizing both their active and reactive power consumption data. The data was recorded by attaching Power Standards Lab PQube measurement device to the appliances. Granularity of the power readings of the disaggregated appliance matches with that of the reading collected for individual device. The accuracy of the model is compared with other models developed using only active …

Reduction Of Emi Due To Common Mode Current Using Common Mode Filter Or Lossy Material, Qian Liu

Masters Theses

"This thesis consists of four papers. In the first paper, two new common mode filter structures were designed, fabricated, and measured. A "sandwich-type" EBG structure that resonates at the desired filter frequency is designed to suppress common mode filter on differential signals. The new filters are placed on top of the PCB as a surface-mount component, instead of being implemented within the PCB stackup. The total radiated power (TRP) of the implemented filter is investigated and discussed. RF absorbing material and traditional shielding are considered to reduce the TRP.

In the second paper and third paper, new PCB-embedded common mode …

Phase Field Modeling Of Electrodeposition Process In Lithium Metal Batteries, Nihal Acharya

Masters Theses

"One of the main weaknesses in long term performance of conventional lithium batteries is the growth of lithium microstructures on the electrode surface due to an electrochemical process, which can eventually lead to failure of these batteries. Suppressing this microstructure growth is a key in developing new generations of lithium metal batteries (LMBs). In this study, a two-dimensional (2D) phase field model is constructed to understand and determine the parameters controlling formation and evolution of microstructures in LMBs. A Ginzburg-Landau free energy functional, which is a function of concentration of Li⁺ and applied voltage, and a system consisting of …

2d Seismic Data And Gas Chimney Interpretation In The South Taranaki Graben, New Zealand, Taqi Talib Alzaki

Masters Theses

"The Taranaki Basin is one of the major oil and gas producing basins offshore New Zealand. The study area covers an area of 10,000 km² in the basin, and includes 171 2D seismic lines and six wells, which are provided by the New Zealand Petroleum & Minerals. Some previous studies refer to the study area as the South Taranaki Graben.

This thesis provides detailed mapping and interpreted subsurface stratigraphy and structure of five horizons, i.e. basement top, Pakawau Group top, Kapuni Group top, Wai-iti Group top, and seafloor. It undertakes studies of the relation between the basin evolution, faults, …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Care-Chair: Opportunistic Health Assessment With Smart Sensing On Chair Backrest, Rakesh Kumar

Masters Theses

"A vast majority of the population spend most of their time in a sedentary position, which potentially makes a chair a huge source of information about a person's daily activity. This information, which often gets ignored, can reveal important health data but the overhead and the time consumption needed to track the daily activity of a person is a major hurdle. Considering this, a simple and cost-efficient sensory system, named Care-Chair, with four square force sensitive resistors on the backrest of a chair has been designed to collect the activity details and breathing rate of the users. The Care-Chair system …

A Feasibility Study Of A Nuclear Power Plant With No Moving Parts, Jonathan Mark Schattke

Masters Theses

"In a nuclear reactor design, every moving part in a system is considered a failure point. In this study, a proposal is made for designing a nuclear reactor that has no moving parts by coupling an accelerator driven core (removing control system moving parts) to a magnetohydrodynamic generator (removing power generation moving parts) using mercury coolant (removing pumping system moving parts). Further safety is realized by using a subcritical core, where the core is never able to sustain a chain reaction on its own, obviating many safety systems. The design is verified with a Monte Carlo simulation "--Abstract, page iii.

3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci

Masters Theses

"Identifying seismic structures and stratigraphy are important for exploration of hydrocarbons. The purpose of this study is to discover seismic structural and stratigraphic features and to utilize the results for interpreting depositional environments. A 3D seismic dataset from the Tui-3D Field, the Taranaki Basin, New Zealand with well data were used to visualize structures, to detect stratigraphic features, to identify main lithology, to understand depositional environment, and to describe seismic facies and reflection patterns of the target horizons. The major formations are in the Kapuni Group.

Seismic structural interpretation indicates thirty-two minor faults, which may play an important role in …

Shale Instability Of Deviated Wellbores In Southern Iraqi Fields, Ahmed Ali Shanshool Alsubaih

Masters Theses

"Wellbore instability problems are the cause for the majority of nonproductive time in the southern Iraqi fields' developments. The most severe problem in terms of effort and disbursement which is referred to a pipe sticking in Tanuma shale formation. Examining the drilling data revealed that this phenomenon was mostly related to the shear failure of the wellbore. Thus, a geomechanical analysis and drilling parameters/ practice optimization analysis were performed on a field in southern Iraq based on data from 45 deviated wells. The geomechanics analysis predicted the suitable drilling fluid density to prevent onset shear failure by using the Mogi-Coulomb …

Structural Analysis And Fluid Flow Modeling Of The Kapuni Field, New Zealand, Jarret Taylor Baldwin

Masters Theses

"The Taranaki Basin is the largest hydrocarbon producing basin in New Zealand. A total area of over 330,000 km

Attenuation Properties Of Cement Composites: Experimental Measurements And Monte Carlo Calculations, Raul Florez

Masters Theses

"Developing new cement based materials with excellent mechanical and attenuation properties is critically important for both medical and nuclear power industries. Concrete continues to be the primary choice material for the shielding of gamma and neutron radiation in facilities such as nuclear reactors, nuclear waste repositories, spent nuclear fuel pools, heavy particle radiotherapy rooms, particles accelerators, among others. The purpose of this research was to manufacture cement pastes modified with magnetite and samarium oxide and evaluate the feasibility of utilizing them for shielding of gamma and neutron radiation. Two different experiments were conducted to accomplish these goals. In the first …

Mechanistic Understanding Of Water-Rock Interactions During High-Salinity Water-Flooding Of Carbonate Reservoirs, Pu Han

Masters Theses

"Chemically tuned water-flooding provides a relatively cheap method of enhanced oil recovery from carbonate and sandstone reservoirs. Several possible recovery mechanisms such as mineral dissolution, multi-component ion exchange, double-layer expansion, adsorption/desorption from rock surface, reduction in interfacial tension, and fines migration that have been proposed are widely debated. The combination of these processes may result in wettability alteration that increases sweep efficiency of water-flooding. Here, wettability alteration due to water-rock interactions will be examined numerically.

To evaluate the wettability alteration, separation between breakthrough curves of the non-reactive component and the cations based on the chromatographic separation will be used due …

Radiation Noise Source Modeling And Near-Field Coupling Estimation In Rf Interference, Liang Li

Masters Theses

"With increasing complexities and shrinking size of modern electronic devices, the near-field RF interference issues are becoming challenging for RF-digital mixed circuit design. Predicting the coupling from digital module to RF antennas and mitigating RF interference is important to the system performance. The ultimate goal of this study is to address the desensitization issues existing in modern electronic devices that have mixed high speed digital-RF circuits, such as cellphone and wearable devices.

In order to estimate the near-field noise coupling from digital module to RF antennas, the noise source is anticipated to be replaced by its equivalent radiation model which …

Seismic Anisotropy And Mantle Dynamics Beneath The Southeastern United States Inferred From Shear-Wave Splitting Analysis, Yunhua Liu

Masters Theses

"Systematic spatial variations of mantle azimuthal anisotropy are revealed by over 3000 pairs of high-quality shear-wave splitting parameters (fast polarization orientations and splitting times) recorded at ~400 USArray and other network stations in the SE United States (75⁰-90⁰ W, and 24⁰-40⁰ N). The fast polarization orientations observed in the continental interior are subparallel to the absolute plate motion (APM) direction of the North American plate with apparent larger-than-normal splitting times, indicating a significant asthenospheric contribution. Fast orientations parallel to the edge of the North American craton are revealed along the southern and eastern margins of the continent. A portion of …

Deterministic Simulation Of Thermal Neutron Radiography And Tomography, Rajarshi Pal Chowdhury

Masters Theses

"In recent years, thermal neutron radiography and tomography have gained much attention as one of the nondestructive testing methods. However, the application of thermal neutron radiography and tomography hindered by their technical complexity, radiation shielding, and time-consuming data collection processes. Monte Carlo simulations have been developed in the past to improve the neutron imaging facility's ability. In this present work, a new deterministic simulation approach has been proposed and demonstrated to simulate neutron radiographs numerically using a ray tracing algorithm. This approach has made the simulation of neutron radiographs much faster than by previously used stochastic methods (i.e Monte Carlo …

Managing Risks Of Market Price Uncertainty For A Microgrid Operation, Sriram Raghavan

Masters Theses

"After deregulation of electricity in the United States, the day-ahead and real-time markets allow load serving entities and generation companies to bid and purchase/sell energy under the supervision of the independent system operator (ISO). The electricity market prices are inherently uncertain, and can be highly volatile. The main objective of this thesis is to hedge against the risk from the uncertainty of the market prices when purchasing/selling energy from/to the market. The energy manager can also schedule distributed generators (DGs) and storage of the microgrid to meet the demand, in addition to energy transactions from the market. The risk measure …

Carbon Transfer From Magnesia-Graphite Ladle Refractories To Ultra-Low Carbon Steel, Andrew Arthur Russo

Masters Theses

"Ultra-low carbon steels are utilized in processes which require maximum ductility. Increases in interstitial carbon lower the ductility of steel; therefore, it is important to examine possible sources of carbon. The refractory ladle lining is one such source. Ladle refractories often contain graphite for its desirable thermal shock and slag corrosion resistance. This graphite is a possible source of carbon increase in ultra-low carbon steels. The goal of this research is to understand and evaluate the mechanisms by which carbon transfers to ultra-low carbon steel from magnesia-graphite ladle refractory.

Laboratory dip tests were performed in a vacuum induction furnace under …

Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck

Masters Theses

"The spatial distribution of fracture sets associated with buckle folds has been well documented in field studies. There are difficulties, however, in placing accurate constraints on the timing of the initiation of individual fracture sets during the deformation history of the fold under in-situ conditions. This study investigates specific conditions that give rise to the initiation of various fracture sets in the hinge and limb of a pericline, based on an analysis of the effective stress evolution during the processes of buckling and erosional unloading. A 3D finite element modeling approach is used to simulate the effective stress evolution in …

Composite Model Representation For Computer Aided Design Of Functionally Gradient Materials, Fangquan Wang

Masters Theses

"Functionally Gradient Materials (FGMs) feature smooth transition from one material to another within a single object. FGMs modeling is considered to be one of the new challenges in Computer Aided Design (CAD) area. To overcome this challenge, this thesis presents a composite approach to model FGMs. The input in STL format can be meshed and voxelized in FGMs modeling system. The material composition in each voxel can be generated from multiple different types of control features. And LTI filters including Gaussian Filter and Average Filter are applied to blur default material features in order to generate FGMs inside models. The …

Engine Sound Simulation And Generation In Driving Simulator, Shuang Wu

Masters Theses

"Simulating a driving environment that provides engine sound as auditory feedback to the driver is a challenging task due to the complexity of engine sound, a wide range of operating speeds, and repeated sound clicking during playback. This thesis describes a method of engine sound simulation and generation for a driving simulator. By analyzing sample sounds, spectral modeling synthesis was used to decompose the sound samples into deterministic and stochastic components. Then, the modeled deterministic and stochastic signals were employed to resynthesize the sounds. To represent engine sounds not available in the recorded database, sound interpolation was applied to two …

Exploring Reservoir Connectivity With Production Data: Two New Methods And A New Technique, Ghazwan Faisal Jasim Al-Khmaysawee

Masters Theses

"This study presents two new, simple methods to explore reservoir connectivity, which has a significant impact on field development strategy. Identifying reservoir connectivity during primary depletion plays an important role in achieving the most cost-effective and highest production possible. It is also very important in future secondary and tertiary oil recovery, particularly when costs dictate a limited number of wells such as those in deepwater environments.

The presented methods are reciprocal-productivity index versus total field material-balance time trend lines and reciprocal-productivity index versus time trend lines. Those two methods are quick, simple, inexpensive, and only need rate and pressure data …

Addressing The Influence Of Carbon Monoxide On The Behavior Of An Hcci Engine, Allen Charles Ernst

Masters Theses

"Homogeneous Charge Compression Ignition (HCCI) may be the next leap of improvement to internal combustion engines due to its decreased emissions and improved engine efficiencies. However, such a jump possesses challenges owing to its strict reliance on the inherent physics that dictate start of combustion and limit the reach of stable operation. This work investigates the role and fundamental influence of carbon monoxide on the cycle-to-cycle combustion dynamics present in the region of incomplete combustion that frames the limited HCCI operating region. An improved understanding will open doors to enhanced control methodologies and an expanded stable operating envelope. A constant …

Correlation Anaylsis Of Magnesite Dissolution Rate And Magnesite Spatial Distribution, Yao Wang

Masters Theses

"This thesis presents a correlation analysis of the spatial distribution and permeability of magnesite dissolution and focuses on its overall rate and average porosity. Magnesite dissolution is affected by several aspects.

A reservoir's large spatial distribution can make capturing the magnesite dissolution difficult, so in this study, a variogram was built in Petrel using a percentage variation of magnesite and sand. The variogram also handles different major and minor directions in anisotropy. After building the magnesite model, simulation of magnesite dissolution was achieved in Cruch Flow to get the magnesite dissolution rate and average porosity.

For correlation analysis, a regression …

Hydrodynamic Of A Co-Current Gas Liquid Upflow In A Moving Packed Bed Reactor With Porous Catalysts, Ali Jabbar Toukan

Masters Theses

"In this study, the hydrodynamic, i.e. flow regime identification, line average liquid holdup, and the internal liquid holdup of a co-current moving packed bed reactor were studied. For the sake of hydrodynamics study, moving bed reactor is investigated as two-phase upflow packed bed reactor. Scaled down configuration was used to simulate of the moving bed reactors utilized in the industrial process. First, line average liquid holdup is measured with different geometrical configurations covering empty, dry, wet, and packed column under flowrates operation conditions. A new methodology has been developed to determine the line average liquid holdup for a porous catalyst. …