Digital Commons Network^™

Laboratory-Scale Research Of Non-Catalyzed Supercritical Alcohol Process For Continuous Biodiesel Production, Aso A. Hassan, Joseph D. Smith

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work investigates the non-catalyzed supercritical methanol (SCM) process for continuous biodiesel production. The lab-scale setup was designed and used for biodiesel production in the temperature range of 520–650 K and 83–380 bar with an oil-to-methanol molar ratio ranging from 1:5 to 1:45. The experiments were performed in the coiled plug flow tubular reactor. The volumetric flow rate of the methanol/oil ranged from 0.1-10 mL/min. This work examines a new reactor technology involving preheating and pre-mixing of the methanol/oil mixture to reduce setup cost and increase biodiesel yield under the same reaction conditions. Work performed showed that FAME’s yield increased …

Oxidation Polymerization Additive Manufacturing, Jonghyun Park, Tazdik Patwary Plateau, Hiep Pham

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Various processes for producing three dimensional electrically conductive polymer structures, such as three dimensional structures of poly(3,4-ethylenedioxythiophene), are described as well as materials produced by these processes.

The Missouri Miner, March 31, 2021

The Missouri Miner Newspaper

No abstract provided.

Human-Robot Collaboration For Effective Bridge Inspection In The Artificial Intelligence Era, Ruwen Qin

INSPIRE Archived Webinars

Advancements in sensor, Artificial Intelligence (AI), and robotic technologies have formed a foundation to enable a transformation from traditional engineering systems to complex adaptive systems. This paradigm shift will bring exciting changes to civil infrastructure systems and their builders, operators and managers. Funded by the INSPIRE University Transportation Center (UTC), Dr. Qin’s group investigated the holism of an AI-robot-inspector system for bridge inspection. Dr. Qin will discuss the need for close collaboration among the constituent components of the AI-robot-inspector system. In the workplace of bridge inspection using drones, the mobile robotic inspection platform rapidly collected big inspection video data that …

Real-Time Identification Of Oxygen Vacancy Centers In Linbo₃ And Srtio₃ During Irradiation With High Energy Particles, Miguel L. Crespillo, Joseph T. Graham, Fernando Agulló-López, Yanwen Zhang, William J. Weber

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Oxygen vacancies are known to play a central role in the optoelectronic properties of oxide perovskites. A detailed description of the exact mechanisms by which oxygen vacancies govern such properties, however, is still quite incomplete. The unambiguous identification of oxygen vacancies has been a subject of intense discussion. Interest in oxygen vacancies is not purely academic. Precise control of oxygen vacancies has potential technological benefits in optoelectronic devices. In this review paper, we focus our attention on the generation of oxygen vacancies by irradiation with high energy particles. Irradiation constitutes an efficient and reliable strategy to introduce, monitor, and characterize …

A Cascaded Power Dividing Decoupling Network For Antennas With Distinct Frequency Bands, Min Li, Lijun Jiang, Kwan Lawrence Yeung

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a novel decoupling method for two antennas operating in adjacent/contiguous frequency bands using a cascaded power dividing decoupling network (C- PDDN). An n-order C-PDDN can be designed to increase antenna isolation at n desired frequency points. Each PDDN is composed of two power dividers, two transmission lines, and one reactive component. Explicit design formulas are founded for determining design parameters. For illustration, a two-order C- PDDN is applied to a testing array. Results show that it could increase isolation by over 20 dB, verifying the effectiveness.

Generation Of Giant Electric Energy Density By Adiabatically Compressed Pin-Pmn-Pt Ferroelectric Single Crystals, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Jay B. Chase

Mining Engineering Faculty Research & Creative Works

The results are reported herein of experimental investigations of the mechanism of electric breakdown and the generation of high voltage and energy by shock-compressed rhombohedral (1-y-x)Pb(In1/2Nb1/2)O3-yPb(Mg1/3Nb2/3)O3-xPbTiO3 (PIN-PMN-PT) ferroelectric single crystals cut and poled along the [111]c crystallographic direction. PIN-PMN-PT crystals were shock-compressed in a direction perpendicular to the polarization, in either the [11-0]c or [112-]c or crystallographic directions. Our experiments demonstrated that shocked crystals with thicknesses ranging from 1 to 5 mm are capable of producing high voltage amplitudes of 9-37 kV, with the amplitudes being directly proportional to the crystal thickness. The experimental results indicate that the shock loading …

Faculty Senate Meeting Minutes Mar. 18, 2021, Missouri University Of Science And Technology Faculty Senate

Minutes & Agendas

No abstract provided.

Ion Pairing And Dielectric Decrement In Glycosaminoglycan Brushes, James D. Sterling, Wenjuan Jiang, Wesley M. Botello-Smith, Yun L. Luo

Business and Information Technology Faculty Research & Creative Works

Cell−surface polysaccharides are essential to many aspects of physiology, serving as a highly conserved evolutionary feature of life and as an important part of the innate immune system in mammals. Here, as simplified biophysical models of these sugar coatings, we present results of molecular dynamics simulations of hyaluronic acid and heparin brushes that show important effects of ion pairing, water dielectric decrease, and coion exclusion. As in prior studies of macromolecular crowding under physiologically relevant salt concentrations, our results show equilibria with electroneutrality attained through screening and pairing of brush anionic charges by monovalent cations at the atomistic detail. Most …

The Missouri Miner, March 17, 2021

The Missouri Miner Newspaper

No abstract provided.

Acute Dose-Dependent Neuroprotective Effects Of Poly(Pro-17Β-Estradiol) In A Mouse Model Of Spinal Contusion Injury, Manoj K. Gottipati, Samuel A.T. Ellman, Devan L. Puhl, Zhen Guan, Phillip G. Popovich, Edmund F. Palermo, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

17β-Estradiol (E2) confers neuroprotection in preclinical models of spinal cord injury when administered systemically. The goal of this study was to apply E2 locally to the injured spinal cord for a sustained duration using poly(pro-E2) film biomaterials. Following contusive spinal cord injury in adult male mice, poly(pro-E2) films were implanted subdurally and neuroprotection was assessed using immunohistochemistry 7 days after injury and implantation. In these studies, poly(pro-E2) films modestly improved neuroprotection without affecting the inflammatory response when compared to the injured controls. To increase the E2 dose released, bolus-releasing poly(pro-E2) films were fabricated by incorporating unbound E2 into the poly(pro-E2) …

Mxene-Graphene Field-Effect Transistor Sensing Of Influenza Virus And Sars-Cov-2, Yanxiao Li, Zhekun Peng, Natalie J. Holl, Md Rifat Hassan, John M. Pappas, Congjie Wei, Omid Hoseini Izadi, Yang Wang, Xiangyang Dong, Cheng Wang, Yue-Wern Huang, Donghyun Kim, Chenglin Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An MXene-graphene field-effect transistor (FET) sensor for both influenza virus and 2019-nCoV sensing was developed and characterized. The developed sensor combines the high chemical sensitivity of MXene and the continuity of large-area high-quality graphene to form an ultra-sensitive virus-sensing transduction material (VSTM). Through polymer linking, we are able to utilize antibody-antigen binding to achieve electrochemical signal transduction when viruses are deposited onto the VSTM surface. The MXene-graphene VSTM was integrated into a microfluidic channel that can directly receive viruses in solution. The developed sensor was tested with various concentrations of antigens from two viruses: inactivated influenza A (H1N1) HA virus …

Measurement Report: Long-Range Transport Patterns Into The Tropical Northwest Pacific During The Camp²Ex Aircraft Campaign: Chemical Composition, Size Distributions, And The Impact Of Convection, Miguel Ricardo A. Hilario, Ewan Crosbie, Michael Shook, Yang Wang, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The tropical Northwest Pacific (TNWP) is a receptor for pollution sources throughout Asia and is highly susceptible to climate change, making it imperative to understand long-range transport in this complex aerosol-meteorological environment. Measurements from the NASA Cloud, Aerosol, and Monsoon Processes Philippines Experiment (CAMP²Ex; 24 August to 5 October 2019) and back trajectories from the National Oceanic and Atmospheric Administration Hybrid Single Particle Lagrangian Integrated Trajectory Model (HYSPLIT) were used to examine transport into the TNWP from the Maritime Continent (MC), peninsular Southeast Asia (PSEA), East Asia (EA), and the West Pacific (WP). A mid-campaign monsoon shift on …

Translational Implications Of The Interactions Between Hormones And Age-Related Hearing Loss, R. D. Frisina, Parveen Bazard, M. Bauer, J. Pineros, X. Zhu, B. Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

Provocative research has revealed both positive and negative effects of hormones on hearing as we age; with in some cases, mis-regulation of hormonal levels in instances of medical comorbidities linked to aging, lying at the heart of the problem. Animal model studies have discovered that hormonal fluctuations can sharpen hearing for improved communication and processing of mating calls during reproductive seasons. Sex hormones sometimes have positive effects on auditory processing, as is often the case with estrogen, whereas combinations of estrogen and progesterone, and testosterone, can have negative effects on hearing abilities, particularly in aging subjects. Too much or too …

All-Sky Search In Early O3 Ligo Data For Continuous Gravitational-Wave Signals From Unknown Neutron Stars In Binary Systems, R. Abbott, T. D. Abbott, Marco Cavaglia, For Full List Of Authors, See Publisher's Website.

Physics Faculty Research & Creative Works

Rapidly spinning neutron stars are promising sources of continuous gravitational waves. Detecting such a signal would allow probing of the physical properties of matter under extreme conditions. A significant fraction of the known pulsar population belongs to binary systems. Searching for unknown neutron stars in binary systems requires specialized algorithms to address unknown orbital frequency modulations. We present a search for continuous gravitational waves emitted by neutron stars in binary systems in early data from the third observing run of the Advanced LIGO and Advanced Virgo detectors using the semicoherent, GPU-accelerated, binaryskyhough pipeline. The search analyzes the most sensitive frequency …

The Missouri Miner, March 10, 2021

The Missouri Miner Newspaper

No abstract provided.

A Gravitational-Wave Measurement Of The Hubble Constant Following The Second Observing Run Of Advanced Ligo And Virgo, B. P. Abbott, R. Abbott, T. D. Abbott, Marco Cavaglia, For Full List Of Authors, See Publisher's Website.

Physics Faculty Research & Creative Works

This paper presents the gravitational-wave measurement of the Hubble constant (H₀) using the detections from the first and second observing runs of the Advanced LIGO and Virgo detector network. The presence of the transient electromagnetic counterpart of the binary neutron star GW170817 led to the first standard-siren measurement of H₀. Here we additionally use binary black hole detections in conjunction with galaxy catalogs and report a joint measurement. Our updated measurement is H₀ = 69⁺¹⁶_-8 km s^-1 Mpc^-1 (68.3% of the highest density posterior interval with a flat-in-log prior) which is …

Thermal Conductivity Of The N = 1-5 And 10 Members Of The (Srtio₃)ₙsro Ruddlesden-Popper Superlattices, Natalie M. Dawley, Ella K. Pek, Che Hui Lee, Eugene J. Ragasa, Xue Xiong, Kiyoung Lee, Simon R. Phillpot, Aleksandr V. Chernatynskiy, David G. Cahill, Darrell G. Schlom

Physics Faculty Research & Creative Works

Unlike many superlattice structures, Ruddlesden-Popper phases have atomically abrupt interfaces useful for interrogating how periodic atomic layers affect thermal properties. Here, we measure the thermal conductivity in thin films of the n = 1-5 and 10 members of the (SrTiO₃)_nSrO Ruddlesden-Popper superlattices grown by molecular-beam epitaxy and compare the results to a single crystal of the n = 1 Ruddlesden-Popper SrLaAlO₄. The thermal conductivity cross-plane to the superlattice layering (k₃₃) is measured using time-domain thermoreflectance as a function of temperature and the results are compared to first-principles calculations. The thermal conductivity of …

The Missouri Miner, March 3, 2021

The Missouri Miner Newspaper

No abstract provided.

Scholars' Mine Quick Facts February 2021, Nancy S. Krost

Scholars’ Mine Statistics

Scholars' Mine Quick Facts are monthly reports of downloads, page hits, and other information about works in the institutional repository of Missouri S&T. A map with downloads by region is also included.

Experimental And Numerical Investigation In Directed Energy Deposition For Component Repair, Lan Li, Xinchang Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Directed energy deposition (DED) has been widely used for component repair. In the repair process, the surface defects are machined to a groove or slot and then refilled. The sidewall inclination angle of the groove geometry has been recognized to have a considerable impact on the mechanical properties of repaired parts. The objective of this work was to investigate the feasibility of repairing various V-shaped defects with both experiments and modeling. At first, the repair volume was defined by scanning the defective zone. Then, the repair volume was sliced to generate the repair toolpath. After that, the DED process was …

Development Of Design Tables For The Cold-Formed Steel Cross-Sections In Aisi D100, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report with the tables in an Excel file intends to provide the local and distortional buckling strengths for the cross-sections provided in AISI Cold-Formed Steel Design Manual to aid design engineers.

Development Of Cufsm Hole Module And Design Tables For The Cold-Formed Steel Cross-Sections With Typical Web Holes In Aisi D100, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report summarizes the effort to develop a simple hole module to perform elastic buckling analysis to obtain the design parameters needed for DSM considering the influence of holes. The hole module requires simple inputs and direct outputs of the elastic buckling information of the local and distortional buckling modes for both gross sections and sections with hole influences.

Review Of Testing By Analysis For Potential Implementation Into Aisi Standards, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

New product development is crucial to allow innovation in the cold-formed steel structural industry. However, the required physical testing of new components and assemblies are often a cost barrier which prevents implementation and slows new product development. Testing by analysis can be a good alternative to physical testing as it reduces the expense and time for performing physical experiments, however, two considerations are necessary to ensure accurate results. First, it requires a rational engineering analysis to calculate the capacities and deformations of the system, and the requirements to produce accurate analyses must be explicitly stated. Second, it is necessary to …

Steel Diaphragm Innovation Initiative, Year 5, Final Report, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Summary

The Steel Diaphragm Innovation Initiative (SDII) is a multi-year industry-academic-government partnership to advance the seismic performance of steel floor and roof diaphragms utilized in steel buildings. This report provides a final report for Year 5 of the overall 5-year SDII plan. Contributions in the final 12 months (1 Jan. 2020 – 31 Dec. 2020) include the following highlights.

Innovation and Practice:

• Adoption in ASCE 7 of new provisions for bare steel deck including methods for buildings with rigid walls and flexible diaphragms, alternative diaphragm design with R_s, and special seismic detailing (following on from successful adoption in …

Tutorials For Mastan 2 And Related Validation, Committee On Specifications For The Design Of Cold-Formed Steel Structural Members

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

This report creates the tutorials helping engineers to correctly model and analyze structural systems comprised of non-doubly symmetric sections using the latest version of MASTAN2. The report also validated a MASTAN2 model using non-doubly symmetric sections against results from a small test program. The following report and tutorials are provided:

AISI Small Project Summary – Tutorials for MASTAN2 and Related Validation

• Tutorial for MASTAN2 v5.1 - Introductory Frame
• Tutorial for MASTAN2 v5.1 - Pour Stop Beam
• Tutorial for MASTAN2 v5.1 - Steel Joist

Signaling In Rat Brainstem Via Gpr160 Is Required For The Anorexigenic And Antidipsogenic Actions Of Cocaine- And Amphetamine-Regulated Transcript Peptide, Christopher J. Haddock, Gislaine Almeida-Pereira, Lauren M. Stein, Matthew R. Hayes, Grant R. Kolar, Willis K. Samson, Gina L.C. Yosten

Biological Sciences Faculty Research & Creative Works

Recent work identified Gpr160 as a candidate receptor for cocaine- and amphetamine-regulated transcript peptide (CARTp) and described its role in pain modulation. The aims of the present study were to determine if Gpr160 is required for the CARTp's ability to reduce food intake and water intake and to initially identify the distribution of Gpr160-like immunoreactivity (Gpr160ir) in the rat brain. A passive immunoneutralization approach targeting Gpr160 was used to block the behavioral effects of a pharmacological dose of CARTp in the fourth cerebroventricle (4V) of rats and to determine the importance of endogenously produced CARTp in the control of ingestive …

An Iterative Hybrid Algorithm For Roots Of Non-Linear Equations, Chaman Lal Sabharwal

Computer Science Faculty Research & Creative Works

Finding the roots of non-linear and transcendental equations is an important problem in engineering sciences. In general, such problems do not have an analytic solution; the researchers resort to numerical techniques for exploring. We design and implement a three-way hybrid algorithm that is a blend of the Newton–Raphson algorithm and a two-way blended algorithm (blend of two methods, Bisection and False Position). The hybrid algorithm is a new single pass iterative approach. The method takes advantage of the best in three algorithms in each iteration to estimate an approximate value closer to the root. We show that the new algorithm …

The Unhappy Hookers; Origin Of Hooker ‘Prostitute’, J. Peter Maher

Arts, Languages and Philosophy Faculty Research & Creative Works

No abstract provided.

Quantitative Evaluation Of Asphalt Binder Extraction From Hot Mix Asphalt Pavement Using Ashing And Centrifuge Methods, Ahmed Hemida, Magdy Abdelrahman, Eslam Deef-Allah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder requires more investigation to be accurately and precisely extracted since it is an effective procedure for quality assurance quality control (QA/QC) and subsequent binder characterization. In this research, the authors presented a hands-on experience with binder extraction to deliver recommendations concerning the sensitive steps that may affect the outcomes (extracted binder content, P_be%). Two mineral matter determination methods (ashing and centrifuge) were addressed based on the centrifuge extraction method. Field cores were investigated by comparing the P_be% to the actual binder content, P_ba%. Analysis of variance (ANOVA) and Tukey Post-Hoc statistical analyses, …