Digital Commons Network^™

The Investigation Of Different Variables In The Assaying Of Silver Cyanide Solutions, Phillip L. Banfield

Bachelors Theses and Reports, 1928 - 1970

The cyanide method of extraction of gold and silver from their ores is extensively used in the United States and elsewhere. It is becoming increasingly more important in its use as the mining of lower grade deposits continues.

Some Preliminary Investiagtions Of The Magnetic Permeabilities Of Alloys Of The Ferromagnetic Metals, John H. Gambill Jr.

Bachelors Theses and Reports, 1928 - 1970

The problem presented for this thesis was an investigation of the magnetic properties of the alloys produced by the methods of powder metallurgy. The question behind this was the correlation of the magnetic properties with the bonding properties and with the diffusion of the constituents.

The Theory Of Alloy Deposition And The Effect Of A Rotating Cathode Upon Such Deposition, With Special Attention To The Possibility Of Depositing Sterling Silver, Kenneth J. Stodden

Bachelors Theses and Reports, 1928 - 1970

In the past few years a great deal of atten­tion has been given to the electrodeposition of alloys. For the main part, this investigation has been of scien­tific interest only; but in a few instances, such work has attained commercial importance.

Measurements Of The Magnetic Permeabilities Of The Iron-Manganese Alloy System Prepared By The Methods Of Powder Metallurgy, O. Cihad Onbulak

Bachelors Theses and Reports, 1928 - 1970

Powder metallurgy is a branch of metallurgy which produces metallic compacts in their final forms by means of pressure and heat-treatment from the pow­ders. The products of powder metallurgy are being used in our daily lives quite often. For example, the tungsten wires in the electric bulbs to the silver-tin fillings of our teeth.

The Extraction Of Chromate Salts From Montana Chromite, Server Tasdemiroglu

Bachelors Theses and Reports, 1928 - 1970

In this thesis I have tried to determine the suit­able temperature, time and the amount of soda ash and lime needed for the calcining process. The leaching and purification tests were studied experimentally. The earlier process for making chromate from chromite was not the same as is used today. There­fore I have found it useful to put into this thesis the newest method for making chromate salts and their important uses.

An Experimental Investigation Of The Age Hardening Of Copper With Manganese Silicide, Ali Kozak

Bachelors Theses and Reports, 1928 - 1970

The subject of the thesis was based upon the theory of precipitation or age hardening of the copper by the compound formed by the Manganese and silicon present in the ternary Cu-Mn-Si alloy. The effect of the heat treat­ment to such an alloy was to be studied and the best aging time and temperature was to be determined.

The Electroformation Of Lithium-Lead Alloys From Molten Electrolytes, Thomas Prater

Bachelors Theses and Reports, 1928 - 1970

An attempt was made to make lead-lithium alloys by electrodeposition of lithium using a molten bath and a molten lead cathode.The variables taken into consideration were: composition of the melt, temperature of the melt, and current density. The purpose of changing these factors was to determine what effect each had on the current efficiency.

Tests On Light Beams Of Cold Formed Steel, American Iron And Steel Institute

CCFSS Library (1939 - present)

1. SCOPE OF THIS REPORT Failure tests have been carried out on beams 0-3, P-3/Q-3, I-1, I-2, I-3, H-1, H-2, H-3, and K-1. As mentioned in the Sixteenth Progress Report (p. 15) it was, anticipated that beams H,I,K, as originally designed, would fail in pure yielding. Since such a failure is not revealing for this investigation, an attempt was made to narrow both flanges of these beams. This work was done in the shops of the School of Civil Engineering and of the School of Mechanical Engineering. It turned out, however, that in cutting off parts of the flanges, the …

Ground Water In The Lake Basin Field And Adjacent Area, Herman Neibauer

Bachelors Theses and Reports, 1928 - 1970

This thesis consists of studying the stratigraphic and structural features of the Lake Basin Field and an adjacent area with special emphasis upon the ground water conditions present.

Oil And Gas Production Methods In Montana, Edgar A. Scholz

Bachelors Theses and Reports, 1928 - 1970

Montana's oil and gas industries aggregate a gross income of over 12,000,000 annually to the state. Oil and gas fields have been thoroughly discussed in liter­ature as to geology, location, production and future possibilities. The specific object of this report has been to compile a comprehensive study of the production methods as they occur.

The Geology And Ore Deposits Of The Ermont Mines, James L. Kelly

Bachelors Theses and Reports, 1928 - 1970

The Ermont Mines are located sixteen miles northwest of Dillon, Montana, in section 35 of T.6S., R.11W. This is in the central part of Beaverhead County. They are considered to be in the Argenta min­ing district, the town of Argenta lying three miles to the northeast.

The Concentration Of Scheelite From The Gold Concentrates Of The Jardine Mining Company, John H. Huxley

Bachelors Theses and Reports, 1928 - 1970

The Purpose of this thesis was to investigate the possibility of concentrating scheelite from Wilfley table gold concentrates from the mill of the Jardine Mining Company; and to determine whether such concentration is economically feasible and the product of sufficiently high grade to meet commercial specifications for such a product.

The Testing And Concentration Of Lake Chelan Copper Ore, Thor W. Johnson

Bachelors Theses and Reports, 1928 - 1970

The geologic history of the Holden area and Lake Chelan district is an integral part of the history of the Cascade Mountain Range. The structure is very complex and the rocks, which have been subjected to intense metamorphic action, are portions of a roof pendant and consists of gneisses, schists and quartzites that are often difficult to correlate.

Gas Analysis By Absorption, Albert D. Mcmahon

Bachelors Theses and Reports, 1928 - 1970

There is practically only one method of gas analysis. This was worked out many years ago by Bunsen, Hempel, and Winkler and consists in the successive absorption with different chemicals of the various constituents of the gas. The only improvement to this method is the oxidation and combustion of different components of a mixture followed by absorption.

Relationships Of Manganese Minerals In The Butte District, Charles F. Parent

Bachelors Theses and Reports, 1928 - 1970

The use of manganese in the steel industry as a deoxidizing and desulfidizing agent makes it a necessity in modern industry, while the various alloy steels using manganese for the quality of toughness are also indispensable. Manganese is also used in the manufacture of such various articles as battery cells, paints and glass.

Pegmatites In Southwestern Montana, Ora Rostad

Bachelors Theses and Reports, 1928 - 1970

Little has been written on pegmatites in Montana except in conjunction with reports on mining districts. This subject was chosen as a senior thesis to see what facts could be ascertained re­garding pegmatites alone, and an attempt has been made by the writer to assemble all written material on pegmatites in southwestern Montana, and to study specimens from those that could be reached or from which specimens were available.

A Study Of The Concentration Of A Low-Grade Manganese Ore From The Ennis District, John B. Schuettenhelm

Bachelors Theses and Reports, 1928 - 1970

The purpose of the investigation was to determine the most effective means of concentrating the manganese in the ore. The study was that of identification of the minerals present. This showed the presence of oxides of manganese and iron, and carbonates of calcium and manganese. Methods of investigation were planned to determined whether the ore could be concentrated effectively by gravity concentration methods. ­

Newark Engineering Notes, Volume 4, No. 2, March, 1941, Newark College Of Engineering

Newark Engineering Notes

A journal by the administration, faculty and alumni of the Newark College of Engineering. This issue includes: "The President's Diary" by Allan R. Cullimore "Move Over, Mr. Field Man" by Marvin B. Scher "Formulas for the Solution of Catenary Problems" by Joseph Joffe "Methods of Subsurface Explorations" by D. C. Frost "The Fundamental Principles of Electricity in Modern Terminology" by Paul C. Shedd "The Value of Libraries to Engineers" by Ira A. Tumbleson "The Second River Joint Sewer" by Edward S. Rankin "S. P. E. E. and N. C. E." "American Society of Civil Engineers" "Conference on Land Surveying" "Professor …

Tests On Light Beams Of Cold Formed Steel For The American Iron And Steel Institute, American Iron And Steel Institute

CCFSS Library (1939 - present)

I. SCOPE OF THIS REPORT Failure tests on two specimens each of beam type A, B, C, D, E, F, G, have been carried out. The lengthy final evaluation of the results will be given in a later report. However, the results of the tests reported herein allow the drawing of rather definite conclusions.

Test 369: Mccormick-Deering Model W-9 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

The Electrolytic Separation Of Copper, Nickel And Precious Metals From Copper-Nickel Matte, Oden Cass Garst

Professional Degree Theses

"During the last few years considerable interest has been shown in domestic reserves of strategic metals. Broadly speaking, the strategic materials of any nation are those materials of commerce essential to the country both in time of war and peace, which are not produced within the boundaries of that country in sufficient quantities to supply even peace-time requirements. The United States is far more fortunate than other countries inasmuch as there are only eight metals which may be classified as being strategic metals; namely, aluminum, antimony, chromium, manganese, nickel, mercury, tin, and tungsten. The work on nickel covered herein was …

Coal Mine Safety Engineering, Charles F. Herbert

Professional Degree Theses

"The progress of coal mine safety may be compared to the development in mining through the years. When coal was first discovered centuries ago, it was taken from river or creek beds and from the outcroppings on the sides of hills. After removing the most accessible coal from the surface, it was necessary to mine the coal by quarrying or stripping the overburden from the coal seams. It is reasonable to assume that when such operations began, accidents of a serious nature also began to occur. Such accidents were no doubt due to rolling rocks or stones, falling material, and …

Some Causes For Porosity And Leakage In Non-Ferrous Castings, Alfred H. Hesse

Professional Degree Theses

"Non-ferrous copper base alloys find many applications in industry. Among these alloys one finds the tin bronzes rather widely used for many purposes, and by delving still farther one finds pressure castings as one of their important applications. In many foundries the percentage of rejections due to leakage or porosity is quite high. This is obviously very costly since leakage is generally only found after machining. It is with a view to determine the causes for leakage in pressure castings and to devise methods for its prevention that the work described in this thesis was undertaken. It is not intended …

Test 368: Mccormick-Deering Farmall Model Md (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Cornell University School Of Civil Engineering Tests On Light Beams Of Cold-Formed Steel, Cornell University School Of Civil Engineering

CCFSS Library (1939 - present)

I. SCOPE OF THIS REPORT In the preceding 14th Progress Report a method was proposed to determine the forces acting in the welds in the web of I-beams composed of two channels. This method essentially has been based on the magnitude "e", the distance of the flexural center from the axis of the web. A formula for "e" was given which applies to symmetrical channels of uniform thickness. In the present report this expression for "e" will be simplified and a more general expression will be derived for "e" for symmetrical channels with web thickness differing from flange thickness. Furthermore, …

The Effect Of Glaze Fit Upon The Strength Of Missouri Zadock, Karl Emil Krill, Floyd Rolland Elliott

Bachelors Theses

"We know that, in the case of a beam, the really effective part of the cross-sectional area is that part farthest from the neutral axis. The I-beam, with most of the central area eliminated, is just as strong as is the rectangular beam of similar outside dimensions. Why should not the glaze on a piece of ceramic ware play as important a part in the strength of the piece as does the outermost area in a beam? Microscopic cracks in the flanges of an I-beam weaken it appreciably. Might not a parallel case exist in a piece of glazed pottery …

Characteristics Of Pyrometric Cone Equivalent Test Furnaces, Alfred W. Allen, Joseph T. Dusza

Bachelors Theses

"Though the method of determining the pyrometric cone equivalent of various silicate materials used in the refractories industry has been standardized by the American Society for Testing Materials (A.S.T.M. Designation: C24-35) as to the rate of heating, method of preparation of sample, mounting of test cones, and the interpretation of results, there still remains some variation in the results obtained by different operators using different types of P.C.E. furnaces. The three types of furnaces most generally used are: the Fulton-Coursen Granular Resistance Furnace, the Denver Fireclay Furnace developed by the American Refractories Institute using gas, and the General Refractories' Oxy-acetylene …

The Chemical Engineering Aspects Of The Saint Louis Smoke Problem, George Augustus Hale

Professional Degree Theses

"During past years smokeless combustion of fuels has been conscientiously sought only in those larger industrial plants where fuel costs were a major factor. Smoke was considered a sign of prosperity in some moderate and even large size industrial practice, and no wholehearted effort was made to utilize the vast amount of energy lost through the smoke stack in the form of unoxidized carbon.

Inefficient combustion, which is so common today, is due in part to a wrong approach to the study of this problem. Industrial combustion, as a science, has, to a certain extent, been left to the mechanical …

The Scope Of Functions Delegated To The Engineering Department Of A Typical, Progressive Metal Mine, Alvin William Knoerr

Professional Degree Theses

"Nearly every conscientious engineering student will subject his college courses to an occasional critical analysis in an effort to assure himself that the studies he is pursuing will be a valuable aid to him in future practice. Possibly this skeptical attitude is accentuated by published letters of graduate mining engineers who decry the courses of mining schools in general and clamor for more practicability and higher specialization. Pure science as it is taught may at times seem to be very remote from any possible practical application. Mathematics may appear to be highly abstract. It seems quite logical that the degree …

Dewatering & Rehabilitating The Oronogo-Webb City Mining Area, Robert Knox Stroup

Professional Degree Theses

"The object of this paper is to describe the dewatering of the Oronogo-Webb City mining area, and the subsequent mining operations which were carried on in the northern section of that area. It deals with the development in that district during the time the writer was familiar with operations there; i.e., from 1935 to 1939, inclusive, and no attempt is made to describe the open pit mining and local milling which have been carried out as a latter part of this same project. Also, no attempt is made to describe the surface drainage work which was planned and carried out …