Digital Commons Network^™

A Study Of The Effects Of Quick Freezing On Saturated Fragments Of Rocks, John W. Scott, George R. Laughlin

Kentucky Transportation Center Research Report

Quick freezing of a fragment of rock which is fully saturated with water is, perhaps, the most rigorous of all tests for soundness, durability, or resistance to weathering. So-called soundness or quality tests employed currently, or heretofore, for evaluating concrete aggregates are usually less rigorous inasmuch as the state of saturation at the outset of freezing is not at a critical level. Hence, the number of freeze-thaw cycles endured by a rock specimen undergoing freezing and thawing in the presence of available water may merely reflect the duration of the exposure before the rock becomes vulnerable to damage -- i.e., …

The Anodic Dissolution Of Cadmium In Aqueous Solution, Yun-Chung Sun

Masters Theses

"The increasing importance of prevention of corrosion in industry has stimulated extensive studies on the fundamental behavior of metals in corrosive media.

The basic mechanism of the anodic dissolution of metals such as cadmium, magnesium, and zinc in salt solutions is not completely known. Several mechanisms have been proposed by different investigators, but evidence is still lacking to draw unquestionable conclusions to explain the discrepancies which often arise between coulometric data and weight loss of metal electrodes in certain salt solutions.

The purpose of this investigation was to obtain experimental data for anodic dissolution of cadmium in various electrolytes and …

Radiation Characteristics Of A U-Slot Antenna., Richard Paul Brueggemann

Masters Theses

"The radiation equations for a simple rectangular slot antenna are derived as a function of the field distribution in the slot. The electric field distribution in the slot is then formulated as a function of the aperture dimensions. The U-shaped slot antenna is described as an extension of the rectangular slot theory and the actual field is measured in the slot for comparison.

The far field equations a.re derived for the U-slot antenna similar to those for the rectangular slot antenna and are evaluated using the formulated distributions in the slot for antennas of two different electrical sizes. The equations …

Compensator Design For Unity Feedback Systems Using An Analytical Method, Chang-Yu Wu

Masters Theses

“In control systems engineering it is frequently necessary to compensate a fixed plant whose transfer function cannot be changed. Usually the characteristics of the resulting system are established in terms of steady-state and transient performance specifications. Generally it is necessary to insert a compensator which insures stability as well as satisfies the specifications.

In this thesis an analytical method is developed to determine the transfer function of the compensator in order to satisfy the following set of specifications. The fixed system is assumed to contain one non-linearity, saturation. The input to the saturable device is constrained in a statistical …

Microscopic Observations On Etched Surfaces Of Zinc Single Crystals And On Anodic Disintegration., Yun Wang

Masters Theses

"The technique used to grow single zinc crystals was based on the Bridgman method. Zinc-gold, zinc-aluminum, and zinc-magnesium alloys were prepared and their single crystals were grown. Four crystallographic planes of the single zinc crystals were used for both chemical and anodic etching. The zinc alloys were etched more easily by acids than the purest (99.999%) zinc. The etching patterns changed for the different crystallographic planes of the single zinc crystals.

The appearance of particles during anodic dissolution of the single zinc crystals depended on time, acid concentration and current density. The partial disintegration of single zinc crystals is promoted …

The Toxic Effects And Fate Of Selected Pesticides In Natural Water., Donald Lee Evans

Masters Theses

"The extensive application of synthetic organic pesticides in the United States has created many problems, particularly with respect to fish life. While a number of investigations have been undertaken to determine the toxicity of several pesticides to various species of fish, a great deal of research work is needed before the problem is completely understood.

The individual toxicities of DDT, BHC, 2.,4-D, and Sevin to western golden shiners were determined by means of the bioassay procedure at a t empera t ure Of 16oc. The four chemicals studied were found to be toxic to the test fish with Median Tolerance …

Estimating Bench Design Parameters For Open-Cut Excavation, Rajni K. Gandhi

Masters Theses

"There are no direct relationships available that provide a basis for bench design of multiple-bench, open-cut earth excavations in competent materials when power shovels are employed. This study was undertaken to determine if mathematical design expressions could be developed when the production rate, material's properties, and equipment operating characteristics were known.

It was found that all bench dimensions were a function of the bench height, which in turn was controlled by the required rate of production. The investigation revealed that suitable relationships could be developed to guide in the control of bank stability, choice of shovel capacity, determination of the …

The Anodic Dissolution And Disintegration Of Gallium And Aluminum And The Initial Valency Of The Ions Entering Aqueous Solutions., Kenneth Anderson Poush

Masters Theses

Gallium dissolved very slowly in dilute acids like HC1, H₂SO₄and HCIO₄. The rate was substantially accelerated if the metal was connected with a platinum electrode in the same solution. From the volume of the hydrogen developed the trivalency of gallium ions going into solution was calculated. This same ionic charge was obtained from coulometric measurements using gallium-amalgam as the anode. The initial ionic charge of aluminum dissolving from an aluminum amalgam anode was evidenced as being plus three by coulometric measurements.

Gallium and aluminum anodes were found to partially disintegrate while the current flowed. …

Solid Solubility Of Sodium Oxide In Tricalcium Aluminate, Joel A. Conwicke

Masters Theses

"The tie line connecting the compounds 3CaO·Al₂O₃ and Na₂O·8CaO·3Al₂O₃ in the ternary system CaO-Al₂O₃-Na₂O was studied at 1250° Celsius.

It was determined that Na₂O can exist in crystalline solution with 3CaO·Al₂O₃ in percentages of about 2.3% or less without any apparent change in the structure of 3CaO·Al₂O₃. X-ray diffraction peaks in the back-reflection region shifted to lower d-spacing values on increasing Na₂O contents.

At a Na₂O content of about 2.7%, each major x-ray …

A Study Of The Separation Of A Mixture Of Carbon Dioxide And Hydrogen By Means Of An Orifice., Larry Gene Bauer

Masters Theses

"The purpose of the investigation was an attempt to verify a statement made by Partridge in an effort to discover a new method of separating gaseous mixtures. Partridge stated that when a constant pressure is applied on two gases of different specific gravity, a larger volume of the l igl1ter gas is forced through the orifice. Orifices of 1.016, 0.319, and 0.222 millimeter in diameter were used in the course of the investigation.

It was found that with the apparatus used in the research endeavor, no separation of the mixture of hydrogen and carbon dioxide could be obtained"--Abstract, p. i

The Effect Of Surface Roughness, Cure Pressure, And Temperature Level On The Thermal Resistance Of Bonds And Contacts, David Leo Schwaller

Masters Theses

"This investigation was conducted to determine the thermal effect of temperature level, surface roughness, and curing pressure on bars and bonded interfaces.

The equipment used in this investigation is shown in Fig. 1 and Fig. 2. The four specimens used, cylindrical aluminum alloy bars, were cut radially at their midpoints and faced on a lathe. Heat was supplied by an electrical resistance heating element and an ice bath was used to conduct heat from the alloy specimen. A heat shield was used to insure one dimensional heat flow. Spacers were placed in the insulation at the top, the interface, and …

Ignition Time Lag: A Measure Of Explosive Energy Release, Paul H. Rydlund

Masters Theses

"By means of the resistance-element, or probe-wire, detonation-velocity measurement technique, explosive reactions from various blasting agents were studied. To reduce the number of variables, only standard AN-FO 94/6 mixtures were used, as are commonly employed today in constructions and mining operations. Accuracy of the data obtained was excellent, and the method proved itself not only relatively simple to operate but versatile in providing considerable information under many testing conditions. Studies of test records revealed the presence of a time-lag frequently occuring [sic] after primer detonation. Environmental factors such as confinement, charge diameter, primer size and energy content, and surface coatings …

The Indole Acetic Acid Oxidase Of Hygrophorus Conicus., Dilip N. Patel

Masters Theses

"The purpose of this investigation was to determine an assay method for measuring the activity of the indole acetic acid oxidase present in Hygrophorus conicus. This enzyme converts tryptamine or indole acetic acid (IAA) into oxindole acetic acid (OIAA).

An assay method for measuring the activity of the enzyme was developed based on the spectrophotometric measurement of tryptamine, IAA, and OIAA. Several other assay methods were tried. The colorimetric method of Gordon and Weber ^(l4) was found to be useful for a quantitative determination of IAA and was insensitive to OIAA. Paper chromatography proved to be useful as a qualitative …

Velocity And Kinetic Energy Distribution Of A Submerged Jet., Patrick Shepard Couch

Masters Theses

"The velocity distribution in a cylindrically bounded region of water induced by a submerged axisynnnetric jet of water, has been investigated. Velocity profiles at successive levels were constructed. The continuity equation was shown to be only approximately verified by the velocity profiles.

The kinetic energy for each level was computed and given mathematical expression"-- Abstract, p. 2

Laboratory Thermal Expansion Measuring Techniques Applied To Bituminous Concrete : Informational Report, C. C. Hooks, William Harner Goetz

JTRP Technical Reports

No abstract provided.

The Anodic Dissolution Of Zinc In Nitrate Solution., Jo Lisle Reed

Masters Theses

"The increasing demand for protective metals as coatings and non-corrosive alloys has stimulated extensive research on the fundamental behavior of metals in corrosive media.

One of the problems still unsolved is the nature of the mechanism of the anodic dissolution of metals like zinc, magnesium, beryllium, cadmium, and aluminum in aqueous salt solutions. Several schools of investigators have proposed different and opposing theories to explain the discrepancies which often arise between coulometric data and the weight loss of metal electrodes in certain salt solutions.

The purpose of this investigation was to obtain experimental data for the anodic dissolution of zinc …

The Effect Of Metallic And Inert Electrodes On The Electrochemical Degradation Of Alkyl Benzene Sulfonate., Thomas Patrick O'Farrell

Masters Theses

"The purpose of this study was to investigate the effects of various metallic and inert electrode combinations on the electrochemical degradation of alkyl benzene sulfonates (ABS) in water and to determine the rate and degree of AB3 removal.

Selected combinations of copper, aluminum, iron, and carbon plate electrodes were studied in systems of tap, distilled and river waters containing an initial ABS concentration of 10 mg/1, using a current density of approximately 0.5 milliamperes per square centimeter and a total detention time of 6 hours. Samples were collected at appropriate time intervals and were analyzed for ABS, chemical oxygen demand …

Thermal Resistance Of Bonds And Contacts, David Marion Lewis

Masters Theses

"The adhesive and sealant Industry has more than kept pace with our rapidly expanding technology of today. This growth has left the standardization of data on adhesives far behind and lack of this data is obvious. Of the many applications, particularly as related to space technology and energy conversion, the resistance to the flow of heat offered by the bond layer is of considerable importance.

Little information is available on the effect of adhesives on heat transfer. In connection with their work on honeycomb panels, Rankle, Gier, and Bevans (7) determined the thermal resistance of the particular type of adhesives …

Design, Construction And Characterization Of A 10-Liter Batch Pilot Plant Fermentor., Sylvester Ogden

Masters Theses

"A 10-liter batch type pilot plant fermentor has been designed and constructed. The design incorporated most of the desirable features of previous designs reported in the literature.

The stainless steel fermentor has a multi-speed agitator and aeration rates as high as 15 cubic feet per hour. Temperature indicating, temperature controlling, pH measuring, and automatic foam controlling systems are included in the design.

Sulfite oxidation rates have been determined for the unit at 15 operating conditions. A maximum sulfite oxidation rate of 1060 millimoles of oxygen per liter per hour has been obtained.

Fermentation using a Torulopsis utilis yeast culture has …

A Preliminary Study Of The Controlled Crystallization Of A Bottle Glass., Narayan M. Sedalia

Masters Theses

The effect of addition of Ti0₂ as a nucleating agent was studied with a bottle glass composition of 74 weight percent Si0₂, l percent Al₂O₃, 5.4 percent Cao, 3.7 percent MgO, 15. 3 percent Na₂O, and 0.6 percent K₂O as a base or original composition. The addition of titanium dioxide ii varied from 3 to 20 weight percent. The composition of this bottle glass was changed by increasing the following ingredients and keeping the other ingredients in the same ratios:

1. Increased 5 weight percent of Al₂O …

Influence Of The Heat Release On Thermodynamic Characteristics Of Diesel Engines., Shirish Amritlal Desai

Masters Theses

"A Diesel. engine is an internal. combustion engine in which the fuel. is ignited by the heat of compression. Thus, the Diesel. engines are known as compression-ignition (C.I.) engines. The engine received its name: from its inventor, Dr. Rudolf Diesel., who in 1893 published a book under the title, '' Theory and Construction 0£ Rational. Diesel Engine". The first successf'u1 Diesel. engines, using liquid: fuel., which was injected into the cylinder by a blast of high-pressure air, were manufactured by the M.A.N. Company of Germany in 1895"-- Introduction, p. 1

6th Annual Rocky Mountain Spectroscopy Conference Abstracts Of Papers

Rocky Mountain Conference on Magnetic Resonance

Abstracts of papers presented at the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

Heat Flux Measurement By Miniature Calorimeters, Gary Rex Coffin

Theses and Dissertations

During recent years an increasing number of technical firms and manufacturers have begun to specify heat flux, energy input per unit area per unit time, as a testing and designing criteria. This change in the boundary condition (to heat flux from temperature excess or others) evolved from the idea that each material has a characteristic burning temperature. Therefore, the rate of ablation or burning depends mainly upon the rate of energy input into the specimen, and not its temperature. Thus, the need for a flux measuring device became more acute.

The Irish Plumber And Heating Contractor, August 1963 (Complete Issue)

Building Services Engineering

No abstract provided.

The Electrical And Optical Properties Of Organic Semiconductors. Part 1 : Preliminary Survey And Purification Techniques, Bohdan Robert Czorny

Theses

The purpose of this work was to investigate the field of organic semiconductors and in particular to develop the means for preparing these materials in suitable condition for measurement and study of semiconducting properties. The first aspects of this project concerned with a preliminary survey of the field and techniques of ultra purification are covered in this work.

Anthracene was selected for investigation because it is the organic semiconductor most commonly studied by other investigators, and considerable published information exists for corroboration.

The preliminary survey elucidated the most promising methods of purification, which were chemical synthesis, sublimation, recrystallization from solvents …

B-147-63, Computation Of Outflow From Breached Dams, June 1963, Defense Intelligence Agency, Production Center, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This guide contains detailed instructions for computing the outflow from breached dams supplemented by extensive tables and charts. The preface state that the document “contains intelligence which is not readily available through other media required for the accomplishment of the assigned mission of the Production Center and of interest to other agencies.

Investigation Of The Ternary System Silver-Aluminum-Indium (Ag-Al-In), Elvin H. Beardslee

Bachelors Theses and Reports, 1928 - 1970

This thesis paper contains material pertaining to & preliminary investigation of the ternary system Ag-Al-In. Procedures in this preliminary investigation are discussed in detail.

Preliminary Examination Of The Aluminum Corner Of The Ternary System Aluminum-Silver-Indium (A1-Ag-In), Jerome J. Blake

Bachelors Theses and Reports, 1928 - 1970

In this paper the author attempts to lay the groundwork for future work on the Al-Ag-In system.

Quality Requirements For Concrete Aggregates, Stanton Walker

Kentucky's Annual Forum on Transportation

No abstract provided.

Planning And Financing County Bridge Programs, Jean E. Hittle, D. G. Shurig

Indiana Local Technical Assistance Program (LTAP) Publications

This manual has been developed to review several different areas of information related to county bridge improvement programs, including (1) the authority and jurisdiction over county bridges (Section II), (2) the various sources of funds for construction and repair of county bridges (Section III) , and (3) the fiscal process of making appropriations and expenditures for construction and repair of bridges (Section VI). These topics are presented in terms of the current Indiana statutes, and for this reason should be of considerable assistance to county road officials as a guide to the official duties of their office.