Digital Commons Network^™

Growth And Expression Of Halorhodopsin For Application In A Protein-Based Artificial Retina, Megan Ryan Gillespie

Honors Scholar Theses

Halorhodopsin (HR), a light-activated chloride ion pump, demonstrates potential for use as the scaffolding in an artificial retina. Retinal implants are needed to restore vision to people afflicted with ophthalmic diseases, such as age-related macular degeneration (AMD) and retinitis pigmentosa (RP). A protein-based chloride ion-patch would be utilized by the eye to create an influx of chloride ions, similar to ion concentrations in healthy retinas during the conversion of light stimuli to electrochemical signals. This protein-based retinal prosthesis will directly stimulate the bipolar cells of the retina, replacing the function of damaged photoreceptor cells. Other alternative treatments for AMD and …

Electronic Circuit To Mimic The Neural Network For The Saccade Controller, Justin D. Morse

Honors Scholar Theses

The proposed device is an electronic circuit that mimics the neural network controlling fast eye movements, or saccades. The device simulates the signals produced by each neuronal population during the control of a horizontal saccade and allows for observing and recording. It will serve as a valuable teaching tool in the field of neural control. Furthermore, the device will have applications in the realm of diagnosing and properly treating brain injury. Finally, this device could be incorporated into a system for controlling the eye movements of a realistic, artificially intelligent robot.

The FitzHugh-Nagumo model of the action potential is used …

High Speed Atomic Force Microscopy Techniques For The Efficient Study Of Nanotribology, James L. Bosse

Master's Theses

As mechanical devices scale down to micro/nano length scales, it is crucial to understand friction and wear at the nanoscale (nanotribology) especially at technically relevant sliding velocities. Accordingly, three novel techniques have been developed to study nanotribology, leveraging recent advances in high speed AFM. The first method utilizes high line-scanning rates coupled with sinusoidal scanning along the AFM fast scan axis, enabling rapid friction measurements as a function of velocity up to 20 mm/sec. The second method rapidly acquires friction versus force curves through disabling the feedback loop during scanning and relating the resulting lateral data with the correspondingly varying …

Nanocharacterization Of Porous Materials With Atomic Force Microscopy, Yasemin Kutes

Master's Theses

Scanning Probe Microscopy techniques have proven very useful in the investigation of porous nanostructured surfaces. Especially, Atomic Force Microscopy (AFM) has been widely used due to its compatibility with non-conducting surfaces. In particular, AFM often complements other techniques like scanning and transmission electron microscopy by providing quantitative surface information coupled with nanoscale spatial resolution. Its ability to operate in fluid is also important, as this allows researchers to mimic the physiological environment of biological materials and systems. In this work, two main types of porous materials are studied with AFM, including Phosphoric Acid Fuel Cell (PAFC) electrode catalyst layers, and …

Eurotech Students In Germany: Preparation, Experience And Outcome, Daisy A. Michaels

Master's Theses

Higher education study abroad programs for U.S. students are on the rise. A variety of undergraduate disciplines are being coupled with international components to bring U.S. students to a higher level of global awareness to meet the demands of today’s economy. The University of Connecticut’s Eurotech Program is an example of this trend. Its students earn degrees in both German and engineering in a five year program. They are given practical training through study and internships in Germany under the auspices of the Baden-Württemberg Exchange Program. One of the Eurotech Program’s major goals is to enhance job opportunities for its …

Improved Tumor Contrast Achieved By Single Time Point Dual-Reporter Fluorescence Imaging, Kenneth M. Tichauer, Kimberley S. Samkoe, Kristian J. Sexton, Jason R. Gunn, Tayyaba Hasan, Brian W. Pogue

Dartmouth Scholarship

In this study, we demonstrate a method to quantify biomarker expression that uses an exogenous dual-reporter imaging approach to improve tumor signal detection. The uptake of two fluorophores, one nonspecific and one targeted to the epidermal growth factor receptor (EGFR), were imaged at 1 h in three types of xenograft tumors spanning a range of EGFR expression levels (n  =  6 in each group). Using this dual-reporter imaging methodology, tumor contrast-to-noise ratio was amplified by >6 times at 1 h postinjection and >2 times at 24 h. Furthermore, by as early as 20 min postinjection, the dual-reporter imaging signal …

Ceas E-News 05.04.2012, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

2012 CEAS Outstanding Seniors, Academic All-Mid-American Conference, Dr. Anthony Vizzini Appointed to State Board of Professional Engineers by Governor Snyder, Team 1677 Quantum Ninja Win FIRST Robotics Competition, Inaugural Service Learning Award, Spring 2012 Tau Alpha Pi Induction Ceremony, WMU SAE Chapter Wins World Congress Competition!, BroncoBike Team Wins Human Assisted Green Energy Vehicle Design Competition

An Investigation Of Fraxinus Americana Branch Sway Using A 3 Dimensional Motion Capture System, Anna T. Campiformio

Master's Theses

Abstract

Wind is a dominant abiotic factor that a tree experiences throughout its lifetime and can cause severe tree damage, resulting in risk of injury to humans, and economic and ecological losses. It is thought that trees develop structural properties and architectures that help withstand loading conditions by dissipating wind energy through damping mechanisms. The role of branch motion in reducing potential dangerous wind loads has been the focus of relatively few studies. Even fewer studies have examined tree sway response to natural wind loaded conditions. In this investigation, branch frequencies were calculated for three Fraxinus americana using a three-dimensional …

Bivariate Drought Analysis Using Entropy Theory, Zengchao Hao, Vijay P. Singh

2011 Symposium on Data-Driven Approaches to Droughts

Drought duration and severity are two properties that are usually needed for drought analysis. To characterize the correlation between the two drought properties, a bivariate distribution is needed. A new method based on entropy theory is proposed for constructing the bivariate distribution that is capable of modeling drought duration and severity with different marginal distributions. Parameters of the joint distribution are estimated with Newton’s method. Monthly streamflow data from Brazos River at Waco, Texas, are employed to illustrate the application of the proposed method to model drought duration and severity for drought analysis.

Surface Mass Transfer In Large Eddy Simulation (Les) Of Langmuir Turbulence, Cigdem Akan

USF Tampa Graduate Theses and Dissertations

Over the past century the study of gas exchange rates between the atmosphere and the ocean has received increased attention because of concern about the fate of greenhouse gases such as CO₂ released into the atmosphere. Of interest is the oceanic uptake of CO₂ in shallow water coastal regions as biological productivity in these regions is on average about three times larger than in the open ocean. It is well-known that in the absence of breaking surface waves, the water side turbulence controls gas transfer of sparingly soluble gases such as CO₂ from the air to the …

Design, Fabrication, And Testing Of A Pdms Micropump With Moving Membranes, Charles Cartin

Theses and Dissertations

This paper will discuss the design, fabrication, and testing of a Poly(dimethylsiloxane) (PDMS) microfluidic pump. PDMS is commonly described as a soft polymer with very appealing chemical and physical properties such as optical transparency, low permeability to water, elasticity, low electrical conductivity, and flexible surface chemistry. PDMS microfluidic device fabrication is done easily with the use of soft lithography and rapid prototyping. PDMS microfluidic devices make it easier to integrate components and interface devices with particular users, than using typically harder materials such as glass and silicon. Fabrication and design of single and multilayer PDMS microfluidic devices is much easier …

In Vivo Immunotoxicological Evaluation Of Electrospun Polycaprolactone (Epcl) And Investigation Of Epcl As A Drug Delivery System For Immunomodulatory Compounds, Colleen Mcloughlin

Theses and Dissertations

Electrospun materials have potential use in many biomedical applications such as soft tissue replacements or as scaffolds to target drug delivery to local sites. Electrospinning is a polymer processing technique that can be used to create materials composed of fibers with diameters ranging from the micron to the nanoscale. We investigated the effects of microfibrous and nanofibrous electrospun polycaprolactone (EPCL) on innate, cell-mediated, and humoral components of the immune system. Results demonstrated that in both young (12 week) and old (6 month) mice, EPCL had no effect on various immune parameters. With its lack of immunotoxicity, EPCL presents an excellent …

Experimental Investigation Of An Actively Controlled Three-Dimensional Turret Wake, Patrick Ryan Shea

Mechanical and Aerospace Engineering - Dissertations

Hemispherical turrets are bluff bodies commonly used to house optical systems on airborne platforms. These bluff bodies develop complex, three-dimensional flow fields that introduce high mean and fluctuating loads to the turret as well as the airframe support structure which reduce the performance of both the optical systems and the aircraft. An experimental investigation of the wake of a three-dimensional, non-conformal turret was performed in a low-speed wind tunnel at Syracuse University to develop a better understanding of the fundamental flow physics associated with the turret wake. The flow field was studied at a diameter based Reynolds number of 550,000 …

Thromboresistance Characterization Of Extruded Nitric Oxide Releasing Silicone Catheters, Kagya Amoako, Christopher Archangeli, Hitesh Handa, Terry Major, Mark E. Meyerhoff, Gail M. Annich, Robert H. Bartlett

Mechanical and Industrial Engineering Faculty Publications

Intravascular catheters used in clinical practice can activate platelets, leading to thrombus formation and stagnation of blood flow. Nitric oxide (NO)-releasing polymers have been shown previously to reduce clot formation on a number of blood contacting devices. In this work, trilaminar NO-releasing silicone catheters were fabricated and tested for their thrombogenicity. All catheters had specifications of L = 6 cm, inner diameter = 21 gauge (0.0723 cm), outer diameter = 12 gauge (0.2052 cm), and NO-releasing layer thickness = 200 ± 11 µm. Control and NO-releasing catheters were characterized in vitro for their NO flux and NO release duration by …

Testing The Efficiency Of Vertically Aligned Gold Nanowires On A Titanium Needle Implantable Neural Electrodes In The Rattus Norvegicus Hippocampus, Lauren Kegley

Electrical Engineering Undergraduate Honors Theses

Miniaturized multi-electrode arrays are MEMS devices that have found use as neural prosthetics (Neuro-MEMS). As implants they can interface with neurons as sensors or actuators and help compensate for loss of sensory input, motor control, or cognitive function. The micro-electrodes, studied here, were developed in-house. They have a vertically aligned gold nanowire array and are mounted on a sturdy fine gauge titanium needle. Hence, the bill of materials and design characteristics encourage its use as neural probe. For this study, a probe was tested in vivo for signal acquisition in the hippocampus of a Rattus Norvegicus (Sprague Dawley Rat). Using …

Synergy Of Alum And Chlorine Dioxide For Curbing Disinfection Byproduct Formation Potential At Central Arkansas Water, Corey W. Granderson

Graduate Theses and Dissertations

Central Arkansas Water (CAW), the water utility for Little Rock, AR, draws their source water from Lake Maumelle and Lake Winona. To curb disinfection byproduct (DBP) formation, CAW has begun retrofitting their two plants to use chlorine dioxide as an alternative primary disinfectant followed by free chlorine secondary disinfection in the distribution system. In this study, fluorescence parallel factor (PARAFAC) analysis was combined with free chlorine simulated distribution system (SDS) tests and DBP formation potential (DBPFP) tests to study the benefit of chlorine dioxide primary disinfection (CDPD) with alum coagulation. Of the DBPs screened, trichloromethane (TCM) was formed in highest …

A Multi-Modal Sensing And Communication Platform For Continental-Scale Migratory Bird Tracking, David J. Anthony

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

This thesis presents a novel platform for tracking migratory birds on a continental scale. Cellular technology is used to augment the short-range radios that have traditionally been used in wireless sensor networks. The platform utilizes multiple sensors, including a GPS and solid state compass. By using these sensors, the platform is capable of not only tracking a bird’s migration path, but also provides information on a bird’s behavior during its life-cycle. Testing methodology utilizing simulations and aspect-oriented programming is used to reveal faults in the platform prior to deployment on wild animals. In collaboration with the International Crane Foundation, and …

Technological Aspects Of Molecular Diagnosis Of Bacterial Infectious Diseases, Christine S. Booth

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

The polymerase chain reaction (PCR) is continually growing in its application, particularly in the field of molecular diagnosis of disease from clinical specimens. The main focus has been in the detection and identification of pathogens. However, quantitative PCR is increasingly utilized to determine initial pathogen load. A well-designed PCR protocol is required in all of these instances. Just as importantly, in the context of disease diagnosis; is the design of the sample processing methodology. The ideal method should concentrate the DNA and effectively isolate a high-quality DNA product, free of PCR inhibitors, while also being simple, reproducible and safe.

The …

Response Strategies For Critical Supply Shortages In Healthcare, Christopher Adkins

Industrial Engineering Undergraduate Honors Theses

The shortage of critical medical supplies in healthcare facilities is of obvious concern to both medical professionals and patients. Speci cally, the growing concern in this area is motivated, at least in part, by our dependence on generic pharmaceuticals. In the absence of FDA restrictions on the production of critical generic goods (e.g. morphine), manufacturers possess little financial incentive to produce numerous products whose patents have expired, but remain critical to patient care. Therefore, faced with crippling shortages, hospitals are left seeking ad-hoc solutions for meeting patient demand of these items. This work considers quantitative response strategies to mitigate the …

Bioengineering Approach To Understanding Tmj Pathobiology, Jonathan Kuo

All Dissertations

The temporomandibular joint (TMJ) is a load-bearing joint consisting of the condyle of the mandibular bone, the fossa eminence of the temporal bone, and a fibrocartilaginous disc held in between the bone surfaces by ligaments. The TMJ disc serves to distribute stress, lubricate movement, and protect the articular surfaces of the joint. Over ten million Americans suffer from TMJ disorders (TMD) that affect the movement and function of the joint, making everyday tasks like talking and eating difficult and painful. A wide variety of treatments and surgeries have been proposed and undertaken with limited success based on the varying degree …

Surface Characterization Of Nephila Clavipes Dragline Silk, Benoit Faugas

All Theses

To design synthetic fibers for extreme applications, many research groups are trying to identify how the structure of natural fibers (such as spider silk) leads to desirable properties such as high tensile strength.
Spider silk is a biological fiber having mechanical properties that exceed those of the best man made fibers in terms of high tensile strength and large extensibility, this combination providing the silk with a large work of rupture. While the bulk structure, composition and properties have been intensively studied elsewhere, this study focuses on elucidating the Nephila clavipes spider dragline silk surface structure and composition, as well …

Sparsity Enhanced Spatial Resolution And Depth Localization In Diffuse Optical Tomography, Venkaiah C. Kavuri, Zi-Jing Lin, Fenghua Tian, Hanli Liu

Bioengineering Faculty Publications - Archive

No abstract provided.

Carbon Fiber Reinforced Carbon Foams For Repair And Reconstruction Of Bone Defects, Brock Holston Marrs, Rodney Andrews, Larry Cunningham Jr.

Center for Applied Energy Research Faculty Patents

The present invention relates to a tissue scaffold and a method of preparing a tissue scaffold for implantation. The tissue scaffold includes a body having a graphite foam core. At least a first portion of the external surface of that graphite foam core is covered by a composite material to provide additional mechanical strength to the scaffold.

The Effect Of Chlorine And Ozone In Controlling Microbes On Organically Grown Cilantro And Carrots, Adam Holtz

BioResource and Agricultural Engineering

This senior project investigates the relative efficacy of ozonated water and chlorinated water for the purpose of sanitizing freshly-harvested organic produce. The aim of this study was to assist the Cal Poly Organic Farm in deciding whether or not to invest in an ozone generator. The crops used for testing were grown organically in the same field. Carrots and cilantro were harvested and promptly treated with 5 ppm ozone solution or 25 ppm sodium hypochlorite solution. Carrots were sampled at 0, 7, and 14 days storage to determine microbial populations. Cilantro was similarly tested at 0, 6, and 12 days …

The Effects Of Coated Gold Nanorods On Porcine Atrioventricular Valve Tissues Using Atomic Force Microscopy, Heather L'Ecuyer

All Theses

In this Master's thesis we examine the effect of surface modified gold nanorods (AuNRs) coated with polyelectrolyte multilayers (PEMs) on the mechanical properties of porcine mitral valve tissue ex vivo. The presence of healthy mitral valve tissue in the body is important to ensuring unidirectional flow of blood through the systemic circuit. Unfortunately, due to its anatomic complexity and unique mechanical behavior, pathological mitral valve tissue remains difficult to treat with conventional methods. We hope that the knowledge gleaned from these studies could be useful for developing new and novel treatments treating pathological mitral valve mechanical properties.
Specifically, we examine …

Research And Development Effort In Developing The Optimal Formulations For New Tablet Drugs, Zhe Li

All Dissertations

Seeking the optimal pharmaceutical formulation is considered one of the most critical research components during the drug development stage. It is also an R&D effort incorporating design of experiments and optimization techniques, prior to scaling up a manufacturing process, to determine the optimal settings of ingredients so that the desirable performance of related pharmaceutical quality characteristics (QCs) specified by the Food and Drug Administration (FDA) can be achieved. It is widely believed that process scale-up potentially results in changes in ingredients and other pharmaceutical manufacturing aspects, including site, equipment, batch size and process, with the purpose of satisfying the clinical …

Engineering Design Of A Prototype Ammonia Absorption Tower, Andrew Warren Calogero

Honors Capstones

No abstract provided.

Design And Implementation Of A Shoulder Simulator, Chelsea Lynn Kowal

Renée Crown University Honors Thesis Projects - All

The main objective of this thesis project is to build a shoulder simulator to be able to understand the mechanics of the shoulder, specifically the rotator cuff and deltoid muscles. The shoulder simulator should be able to mimic the important motions of the human shoulder by pulling on tendons of cadaver shoulders and moving the shoulder in various specified motions. In my thesis project, I worked on creating a shoulder simulator that would control the rotator cuff muscles along with the three deltoid muscles. In order to do this, I needed to design and test the shoulder simulator using cadaver …

Escherichia Coli Hm22 Biofilm Viability When In Contact With Implant-Grade, Titanium-6aluminum-4-Vanadium Alloy Under Varied Electrochemical Conditions, Alexander Ross Weiss

Renée Crown University Honors Thesis Projects - All

No abstract provided.

Modeling And Managing Engineering Changes In A Complex Product Development Process, Weilin Li

Mechanical and Aerospace Engineering - Dissertations

Today's hyper-competitive worldwide market, turbulent environment, demanding customers, and diverse technological advancements force any corporations who develop new products to look into all the possible areas of improvement in the entire product lifecycle management process. One of the areas that both scholars and practitioners have overlooked in the past is Engineering Change Management (ECM).

The vision behind this dissertation is to ultimately bridge this gap by identifying main characteristics of a New Product Development (NPD) process that are potentially associated with the occurrence and magnitude of iterations and Engineering Changes (ECs), developing means to quantify these characteristics as well as …