Digital Commons Network^™

The Use Of A Steady State Flow Reactor In The Study Of Rapid Gas Phase Reactions, Ormond Kennedy Lay

Masters Theses

"The demonstration of the feasibility of rocket propelled devices for various purposes within the past few years has initiated an intensive search for suitable reactants for use as rocket fuels. Consequently, the investigation of the properties of chemical reactions which rapidly liberate large quantities of energy has assumed major importance. In order that such reactions may be adapted to practical use as rocket propellants knowledge of the characteristics of these reactions is required. Properties such as+ the mechanism of the reaction, the speed of the reaction under varied conditions of temperature, pressure and concentrations, the conditions required for the initiation …

An Investigation Of Continuous Steel Beams In The Plastic Range, Robert Adams Shoolbred

Masters Theses

"The purpose of this thesis is to investigate the action of beams in the plastic range. The test specimen will be a 4WF 13 structural shape continuous over three supports having equal span lengths of seven feet. Three types of loading were chosen. The first loading will be concentrated in the center of each span. The second loading will be a concentrated load in the center of one span only. The third loading will be the settlement of the two end supports until a plastic hinge forms at the center support, then the two spans will be loaded with concentrated …

Investigation Of Soil Bricks As A Building Material, Ahmet Ilter

Masters Theses

"The need of a cheap construction material for small village farm construction in Turkey makes soil-cement a most desirable material. What is more, as far as the author knows, soil-cement has not found any application in farm house construction in Turkey as yet. So the author, being acquainted with his native country's house construction problem, and seeing the suitable application soil-cement have on such construction, came to the decision that he should investigate this problem thoroughly.

The main objective of the tests run in this investigation will be to find the strength of different samples of soil-cement. The stabilizer used …

Testing Of Missouri Shales For Light Weight Aggregate Production, Jerry D. Plunkett

Masters Theses

"The original objective of this investigation was to determine by testing those clays, shales, and loesses occuring in Missouri in large deposits (over 15 feet in thickness with little overburden), which would be suitable for the production of light weight aggregate. The second objective was to investigate the mechanism of bloating as related to the physical and chemical properties of the above materials, and by using these relationships cause clays which do not naturally bloat, to bloat using some addition. The use of additives would permit the economical use of material closer to the market in many instances.

After the …

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

A Study Of The Deformation Texture And Its Variation In Cold Drawn Nickel Rods, Krishan Kumar Tangri

Doctoral Dissertations

"The production of rods by cold drawing is a development of recent years as compared to other methods of fabrication. Though a good many investigations correlating the observed mechanical properties to the mill practices employed have been reported, the results nevertheless are more of a qualitative and empirical nature. It is well known that the physical properties of a metal product are related to its deformation textures which are characteristic of the metal and the fabricating method used. Thus a study of the deformation textures of cold-drawn rods, specially by x-ray diffraction techniques should provide a much more precise and …

The Rate Of Dissolution Of Aluminum In Hydrofluoric Acid, Yen-Ngen Wang

Doctoral Dissertations

"Pure aluminum has a relatively low strength, and its use is, therefore, rather limited. However, the resistance of pure aluminum to the attack of acids and many neutral solutions is higher than that of less pure aluminum or most of the aluminum-base alloys. For this reason, alclad alloy sheets, are made with a coating of pure aluminum on one or both sides of an aluminum alloy core. The coating is metallurgically bonded to the core over the entire area of contact. Thus the coating electrochemically protects the core from corrosive attack.

Aluminum is more negative in the electrochemical series than …

Hydrogen Overvoltage On Titanium, Sheng-Tai Shih

Doctoral Dissertations

"The hydrogen overvoltage has been defined as the difference between the potential of the working electrode (cathode) and the theoretical reversible value for the same solution. This definition brings out the difficulty involved in the measurement of the "theoretical reversible potential for the same solution” as the potential of the hydrogen electrode in such a solution is usually different from the value of a standard reversible hydrogen electrode, for which the activity of hydrogen ions is set as being “1” and the potential arbitrarily set as being “0”. Besides, it is sometimes necessary to add addition agents to the solution …

Carbon Monoxide Attack Of Refractories, William A. Frad

Doctoral Dissertations

"The disintegration and failure of fire clay refractories due to the action of carbon monoxide has been studied tor a period at about fifty years. The most important application is in blast furnace refractories. Similar failures due to carbon deposition, involving other gases such as methane, have been noted and less extensively studied. Failures due to the action of gases other than carbon monoxide are beyond the scope of this thesis. Occasional attempts to find some agent to prevent disintegration have been mentioned in the literature. In this study the number of such substances and the results of their action …

An Investigation Of The Characteristics Of High Alumina Refractory Castables, Gajendra Nath Mohanty

Doctoral Dissertations

"Refractory castables or concretes, a comparatively new member of the refractories family, are an admixture of highly aluminous cements and graded refractory aggregates, blended in predetermined proportions very much like structural concrete. The refractory aggregates must contain a large amount of fines contrary to the requirements of ordinary concrete. Unlike the Portland cements, which are mainly combinations of calcium silicates, the highly aluminous cements are predominantly calcium aluminates. They are comparatively of a refractory natures, having the hydraulic setting property combined also with high early strength. The discovery of the fact that these refractory concretes could be cast, in situ, …

A Study Of The Bonding By Air-Setting Refractory Mortar At Elevated Temperatures, Bhikhubhai Mahadeo Sedalia

Doctoral Dissertations

"The importance of a suitable material for the laying of bricks in furnace and kiln construction has been recognized by the refractory industry for a long time. It is necessary that a strong bond should develop between the bricks to impart strength to the entire construction work. A weak joint would form the weakest link and dangerously weaken the whole structure.

Such being the importance of the bond, the refractory industry has made quite an effort to develop jointing materials which would produce strong bonds. During the last two decades, due to intensive research and development work, many good bonding …

Mechanism And Measurement Of First Stage Graphitization In White Cast Iron, David S. Gould

Masters Theses

"The original object of this thesis was to ascertain if coercive force measurements could be used for the determination of degree of malleablization in malleable iron. Since first stage graphitization was involved, it was only natural that an interest in the mechanism of first stage graphitization developed. The investigation which resulted from this interest was done primarily for the edification of the author, however it was subsequently deemed of enough importance to be included in this thesis. For this reason the thesis may appear at times to deviate from the original objective"--Preface, page iii.

Design Of A Precast Concrete Deck Girder Highway Bridge, Robert V. Gevecker

Professional Degree Theses

"In the Fall of 1951, as a result of an agreement between the Portland Cement Association and the Missouri State Highway Department, with the approval and good wishes of the United States Department of Commerce, Bureau of Public Roads, the State Highway Department embarked on a program to design and construct several precast, prestressed, and precast-prestressed concrete highway bridges"--Introduction, page 1.

The purpose of this extensive program being to indicate to State Highway officials and other interested parties the advantages of these types of construction. In the words of Mr. S. W. O'Brien, District Engineer for the Bureau of Public …

An Analysis Of A Cathode-Coupled Multivibrator, Fred T. Sinnott

Electrical and Computer Engineering ETDs

The purpose of this study is to develop an analysis for monostable cathode-coupled multivibrators and verify the analysis by experimental results.

Engineering Geology For Dams, Howard T. Bolton

Civil Engineering ETDs

No abstract provided.

Investigations In Prestressed Concrete Design, Anthony Radosevich

Civil Engineering ETDs

No abstract provided.

A Plane Coordinate System For Bernalillo County, Karl V. Morin

Civil Engineering ETDs

The first purpose of this thesis is to frame an enabling act that could be submitted to legislature for adoption. Such an act would authorize the use of plane coordinate system, but not make it mandatory. Twenty-four states have passed laws establishing state coordinate systems.

A second purpose of this thesis is to provide practicing engineers with all the necessary information and explanatory material in one manuscript to permit them to apply the system to their work. An example is worked out in detail using local points known to local men and fully explained step by step.

In addition to …

An Analysis Of The Monostable Cathode-Coupled Multivibrator, Joseph C. Connell

Electrical and Computer Engineering ETDs

II. PURPOSE OF THESIS

The foregoing comments pointed out the facts that: 1) little has been done to show the similarity between the multivibrator and the RC amplifier with degenerative feedback; 2) the existing treatment of the conditions under which a linear relationship between pulse duration and applied grid voltage will exist does not give results which are in very good agreement with the values used in a practical circuit.

It is the purpose of this study to fill in these gaps by showing that the equations resulting from an analysis of the cathode-coupled multivibrator are, in general, those of …

A Historical Study Of Flood Prior To 1892 In The Rio Grande Watershed, New Mexico, Rufus H. Carter

Civil Engineering ETDs

The purpose of this study is twofold: first, to collect as much recorded data as possible on the floods in the Rio Grande watershed in New Mexico prior to 1892, and second, to summarize that data with particular reference to hydrologic and economic facts that appear in the record.

An Investigation Of The Water Supply Of The Laramie River Basin And Its Utilization, Omer D. Hall

Civil Engineering ETDs

Many plans have been proposed during the last quarter century for increasing the water supply available to the Laramie River Basin. It is the purpose of this thesis to consider physically possible plans for increasing the available water and to estimate the amount of this increase. The lining of canals on the Wheatland project is suggested and studied in detail.

A Proposed Traffic Interchange For The City Of El Paso, Paul C. Hassler

Civil Engineering ETDs

This survey was conducted at the request of the Traffic Division of the El Paso Police Department for the purpose of improving the supervision and administration of the department. The main conclusions, in addition to the recommendation of certain changes and expansions of the Police Department, was that the city hire a traffic engineer to unsnarl its traffic problems. At this writing preliminary steps have been taken in both directions by the commission.

An Investigation Of The Effect Of Feedback On Amplifier Figure Of Merit, John L. Crone

Electrical and Computer Engineering ETDs

It was the purpose of this investigation to determine the effect of feedback on the figure of merit of (1) the resistance coupled amplifier; (2) the shunt peaked amplifier; and (3) the single tuned amplifier.

An Experimental Method Of Predicting Strength Variations In Portland Cement, James H. Sprouse Jr.

Civil Engineering ETDs

It was the purpose of this study (1) to show the variations that may be expected in the strength characteristics of different shipments of Portland cement of the same brand from the same cement mill; (2) to show the variations in the strength characteristics of different brands of cement; and (3) to develop an accelerated strength test for Portland cement upon which the strength of the concrete made from the cement could be predicted.

Growth And Development Of The Present Division Of Technology At Utah State Agricultural College, Lynn R. Willey

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis traces the growth and development of the Division of Technology at the Utah State Agricultural College from 1890, when the first mechanic arts classes were taught as part of the offering in Mechanical Engineering, to the present, covering as thoroughly as possible from the source material available, the chain of events out of which the present expansive and complex program has evolved. The intention here is not merely to itemize the steps in this development, but wherever possible to investigate the influences involved; also, to give some attention to the industrial, education, and war-time needs that have created …

Highways In Civil Defense, R. E. Bagby

Kentucky's Annual Forum on Transportation

No abstract provided.

Metallurgical Pulp Mill Processing For The White Pine Copper Company Project, White Pine, Michigan, Steve Theodorides

Professional Degree Theses

No abstract provided.

News Bulletin - January, 1953, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A three page newsletter of the Airline Medical Examiners Association which was published on an irregular basis from 1950-1957. This organization was a predecessor of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Organization And Execution Of A Major Industrial Electrification Project, Robert F. Mccaw

Professional Degree Theses

"All emergencies, especially those created by war, have marshalled the industrial might of nations, among other things. World War II was no exception; in fact, it produced the greatest expansion of industrial facilities in history.

Most all plants in the country underwent some degree of expansion. In certain industries, the experienced workers of existing plants were employed as nuclei for the organization of the gigantic new plants required to produce the arms and equipment necessary to the conduct of a global war.

This thesis pertains to one phase of the design and construction of such an enterprise. This particular phase …

The Preparation Of Zirconium Powder, Herbert S. Kalish

Professional Degree Theses

"The preparation of zirconium powder by several different methods is fully described and evaluated. Most of the methods described are of a rather classical nature and these methods are discussed as taken from their original sources with suggestions for possible streamlining. Flow sheets are provided.

The first series of steps to produce zirconium powder is almost invariably the production of pure zirconium tetrachloride or pure zirconium oxide from the tetrachloride. The processes described include the sodium reduction of zirconium tetrachloride, sodium reduction of the double alkali fluorides, the calcium reduction of zirconium oxide, hydrogen embrittlement and comminution of reduction products. …

A Historical Study Of The Influence Of The Railroad Upon Ogden, Utah, 1868-1875, Alma W. Hansen

Theses and Dissertations

The general plan of this study is to sketch the beginning of Ogden settlement and the early history up to the beginnings of the influence of the coming of the railroad, then to follow in more detail the conditions and influences that developed as the railroad was built and the changes that followed the completion of the line.