Operations Research, Systems Engineering and Industrial Engineering Commons^™

Fault Detection Based On Sliding Window And Multiblock Convolutional Autoencoders, Jianpeng Mou, Weili Xiong

Journal of System Simulation

Abstract: In order to further improve the fault detection performance and fully mine the timing and hidden feature information, a fault detection method based on convolutional auto encoder is proposed. On the basis of modeling the original information set, the modeling of cumulative information and rate of change information is added to enhance the mining of implicit information; The three reconstructed information sets are sampled by sliding windows, and time series feature extraction and modeling are performed based on convolutional auto encoders. Bayesian fusion of the decision results of the convolutional auto encoder is performed to obtain the statistics, and …

Improved Multi-Objective Swarm Algorithm To Optimize Wash-Out Motion And Its Simulation Experiment, Hui Wang, Le Peng

Journal of System Simulation

Abstract: Addressing the issues such as signal loss, distraction, and bad wash-out effect caused by improper parameter selection in classic wash-out algorithms, an improved multi-objective artificial bee colony algorithm is proposed to optimize the filter parameters of the classical wash-out algorithm to improve the effect. For the problems in the initialization and local optimization of traditional swarm algorithm, Circle mapping and Pareto local optimization algorithm are introduced. The human perception error model, acceleration difference model, and displacement model are established, and the model function is used as the objective function, the parameters of the classical wash-out algorithm is optimized by …

Reconnaissance Mission Planning Method For Air-Ground Heterogeneous Unmanned Systems, Guohui Zhang, Ya'nan Zhang, Ang Gao, Aoyu Xu

Journal of System Simulation

Abstract: Compared with the air-based homogeneous unmanned system, the motion capabilities, resource payloads, and combat scenes in the air-ground heterogeneous unmanned system increase the number of constraint conditions and significantly increase the computational complexity of the solution model. The modeling of collaborative combat missions and the efficient solution of large-scale problems are the key issues. With the time, path cost, and reconnaissance benefit as the objective functions, considering the constraints such as the endurance of unmanned platforms, a multi-objective programming model for the reconnaissance missions of an air-ground heterogeneous unmanned system is constructed. Aiming at the urban combat environments with …

Ground Target Recognition And Damage Assessment Of Patrol Missiles Based On Multi-Source Information Fusion, Yibo Xu, Qinghua Yu, Yanjuan Wang, Ce Guo, Shiru Feng, Huimin Lu

Journal of System Simulation

Abstract: For the multiple patrol missiles to attack the high defense capacity targets, a mobile ground target detection and damage assessment method based on multi-source information fusion is proposed. The multi-source information fusion of infrared images and RGB images is carried out by using IoU determination. A novel two-stage tightly coupled damage assessment method based on YOLO-VGGNet of patrol missiles to mobile ground targets is proposed. This method can fully use the advantage of deep semantic information extraction of CNNs and introduce the infrared damaging information simultaneously to achieve the online and real-time damage assessment of mobile ground targets. The …

Design And Application Of Hardware-In-The-Loop Simulation System For Infrared Imaging Guide Missile Test And Evaluation, Jianbin Dou, Xiaobing Wang, Hongjian Yang, Yulong Gao

Journal of System Simulation

Abstract: The characteristics of the army's conventional infrared imaging guide missile hardware-in-theloop simulation system used for test and evaluation is analyzed, and a system that can meet the test and evaluation requirement of infrared imaging guide missile is designed. The key technologies such as universal system design, rapid iterative development design of heterogeneous communication data, high radiation infrared interference dual channel coupling simulation, high-precision timing and synchronization, generation of complex battlefield environment are solved. The application of the system is verified on the typical anti-tank missile and helicopter borne missile tests. The system can be used for infrared imaging guide …

Design Of 3d Visualization Monitoring System For Oil Field Pumping Unit Based On Unity3d, Liqiang Liu, Wenlei Sun, Yi Wang, Bingkai Wang

Journal of System Simulation

Abstract: Aiming at the defects of single monitoring form, low degree of 3D visualization and poor linkage of pumping unit, the information-physical real-time mapping is introduced to develop the 3D visualization monitoring system for oil field pumping unit. The digital space of pumping unit are designed and the design architecture of virtual-real interaction layer is built. The composition and relation framework of 3D visualization system are built. Combined with the inverse kinematics, the mathematical model is built, and the overall architecture of the pumping unit 3D visualization system is designed based on the five-dimensional model and Unity3D platform. The beam …

Optimal Scheduling Strategy Of Virtual Power Plant With Carbon Emission And Carbon Penalty Considering Uncertainty Of Wind Power And Photovoltaic Power, Jijun Shui, Daogang Peng, Yankan Song, Qiang Zhou

Journal of System Simulation

Abstract: To better meet the development needs of China's new power system, an optimal scheduling strategy of virtual power plant(VPP) with carbon emission and carbon penalty considering the uncertainty of wind power and photovoltaic power is proposed. The mathematical description of photovoltaic(PV), wind turbine(WT), combined heat and power(CHP) unit and energy storage system (ESS) is carried out, and a wind-solar output model considering the uncertainty is established. The scenario generation and reduction method is used to generate the typical scenario. To maximize the overall operation benefit of VPP, considering carbon emission cost and carbon penalty, an optimal scheduling model of …

Flipper Control Method For Tracked Robot Based On Deep Reinforcement Learning, Hainan Pan, Bailiang Chen, Kaihong Huang, Junkai Ren, Chuang Cheng, Huimin Lu, Hui Zhang

Journal of System Simulation

Abstract: Tracked robots with flippers have certain terrain adaptation capabilities. To improve the intelligent operation level of robots in complex environments, it is significant to realize the flipper autonomously control. Combining the expert experience in obstacle crossing and optimization indicators, Markov decision process(MDP) modeling of the robot's flipper control problem is carried out and a simulation training environment based on physics simulation engine Pymunk is built. A deep reinforcement learning control algorithm based on dueling double DQN(D3QN) network is proposed for controlling the flippers. With terrain information and robot state as the input and the four flippers' angle as the …

Short-Term Bus Passenger Flow Prediction Based On Convolutional Long-Short-Term Memory Network, Jing Chen, Zhaochong Zhang, Linkai Wang, Mai An, Wei Wang

Journal of System Simulation

Abstract: To address the problem that the traditional short-time passenger flow prediction method does not consider the temporal characteristics similarity between the inter-temporal passenger flows, a shorttime passenger flow prediction model k-CNN-LSTM is proposed by combining the improved k-means clustering algorithm with the CNN and the LSTM. The k-means is used to cluster the intertemporal timeseries data, the k-value is determined by using the gap-statistic, and a traffic flow matrix model is constructed. A CNN-LSTM network is used to process the short-time passenger flows with spatial and temporal characteristics. The model is tested and parameter tuned by the real dataset. …

Bus Traffic Strategy Based On Immune Theory In Network Environment, Cao Li, Rui Zheng, Xiaolu Ma, Ziqiong Ding, Junyi Zhong, Sheng Zhang, Jingjing Qi

Journal of System Simulation

Abstract: In V2X network environment, the bus system can obtain dynamic global information and the bus traffic strategy is carried out based on the road scene between adjacent bus stops. The mathematical model of bus rapid traffic is constructed with the difference of green time ratio as the main parameter. A hybrid genetic operator is proposed on the basis of the combination of genetic algorithm and immune theory, the design of affinity, the selection of excellent antibodies. A bus traffic strategy based on immune theory is proposed on the basis of the improvement of adaptive crossover and mutation probability. The …

Research On Vehicle Detection Method Based On Improved Yolox-S, Xiliu Zhang, Xiaoling Zhang, Minjun He

Journal of System Simulation

Abstract: A improved vehicle detection model based on multi-scale feature fusion of YOLOX network is proposed to solve the problem of missing and false detection of small vehicle targets. Ghost-cross stage partial(CSP) based on the depth separable convolution is designed to replace part of cross stage partial in network to speed up the speed of detection. The max pooling mode of model is improved to Softpool mode, and coordinate attention mechanism is introduced to enhance the feature expression of target to be detected and to optimize the problem of target missing detection. Focal Loss is selected as the confidence loss …

A Review On Additive Manufacturing For Aerospace Application, Radhika C, Ragavanantham Shanmugam, Monsuru Ramoni, Gnanavel Bk

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing, a cutting-edge technology often colloquially known as 3D printing, is a transformative process used to meticulously fabricate complex components by adding material layer upon layer. This revolutionary manufacturing method allows for precise control and customization, making it a go-to choice in various industries, from aerospace to healthcare. The adroitness of additive manufacturing in creating a complex geometry as a whole is very much harnessed by the aerospace Industry. Generating a component using additive manufacturing involves optimal design, methods, and processes. This review gives a broad knowledge in developing a part or product by choosing the appropriate design, method, …

Fatigue Characteristics Of Steel–Concrete Composite Beams, Ayman El-Zohairy, Hani Salim, Hesham Shaaban, Mahmoud T. Nawar

Faculty Publications

Fatigue in steel–concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on composite beams with various arrangements are presented. Fatigue tests were performed up to 1,000,000 cycles using four-point loading, encompassing various ranges of shear stress at a consistent amplitude. Additionally, the effects of external post-tensioning and the strength of the shear connection were investigated. Static tests were run until failure to assess the enduring strength of the specimens subjected to fatigue. The cyclic mid-span …

Dl-Drl: A Double-Level Deep Reinforcement Learning Approach For Large-Scale Task Scheduling Of Multi-Uav, Xiao Mao, Guohua Wu, Mingfeng Fan, Zhiguang Cao, Witold Pedrycz

Research Collection School Of Computing and Information Systems

Exploiting unmanned aerial vehicles (UAVs) to execute tasks is gaining growing popularity recently. To address the underlying task scheduling problem, conventional exact and heuristic algorithms encounter challenges such as rapidly increasing computation time and heavy reliance on domain knowledge, particularly when dealing with large-scale problems. The deep reinforcement learning (DRL) based methods that learn useful patterns from massive data demonstrate notable advantages. However, their decision space will become prohibitively huge as the problem scales up, thus deteriorating the computation efficiency. To alleviate this issue, we propose a double-level deep reinforcement learning (DL-DRL) approach based on a divide and conquer framework …

Characterizing Linearizable Qaps By The Level-1 Reformulation-Linearization Technique, Lucas Waddell, Warren Adams

Faculty Journal Articles

The quadratic assignment problem (QAP) is an extremely challenging NP-hard combinatorial optimization program. Due to its difficulty, a research emphasis has been to identify special cases that are polynomially solvable. Included within this emphasis are instances which are linearizable; that is, which can be rewritten as a linear assignment problem having the property that the objective function value is preserved at all feasible solutions. Various known sufficient conditions for identifying linearizable instances have been explained in terms of the continuous relaxation of a weakened version of the level-1 reformulation-linearization-technique (RLT) form that does not enforce nonnegativity on a subset …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Glop: Learning Global Partition And Local Construction For Solving Large-Scale Routing Problems In Real-Time, Haoran Ye, Jiarui Wang, Helan Liang, Zhiguang Cao, Yong Li, Fanzhang Li

Research Collection School Of Computing and Information Systems

The recent end-to-end neural solvers have shown promise for small-scale routing problems but suffered from limited real-time scaling-up performance. This paper proposes GLOP (Global and Local Optimization Policies), a unified hierarchical framework that efficiently scales toward large-scale routing problems. GLOP partitions large routing problems into Travelling Salesman Problems (TSPs) and TSPs into Shortest Hamiltonian Path Problems. For the first time, we hybridize non-autoregressive neural heuristics for coarse-grained problem partitions and autoregressive neural heuristics for fine-grained route constructions, leveraging the scalability of the former and the meticulousness of the latter. Experimental results show that GLOP achieves competitive and state-of-the-art real-time performance …

Natural Language Processing Analysis Of Online Reviews For Small Business: Extracting Insight From Small Corpora, Benjamin J. Mccloskey, Phillip M. Lacasse, Bruce A. Cox

Faculty Publications

Receiving and acting on customer input is essential to sustaining and growing any service organization, particularly a small family business whose livelihood depends on strong relationships with its customers. The competitive advantage offered by advanced analytical approaches for supporting decisions is not trivial, and enterprises across virtually all domains of society are investing heavily in this emerging discipline. Natural Language Processing (NLP) is a subset of computer science that employs computational approaches to analyze human language; it is effective at extracting insight from text data but frequently requires large corpora to train its models, in the scale of thousands or …

Investigation Of Machine Learning Driven Adaptive Control Strategy For Heat Exchanger Under Varying Fouling Conditions, Reshma Madhu Pk

Theses and Dissertations

Fouling is an undesirable and inevitable phenomenon that affects Heat Exchanger (HE) dynamics, increases maintenance cost (>50%), and loss of production. Conventional fouling prediction and control techniques demand an in-depth understanding of the HE-specific fouling dynamics. Hence, machine learning emerges as an ideal tool for learning the fouling process from the available measurement dataset.

The proposed work aims to design a machine learning-driven adaptive control technique for an industrial HE, subjected to varying fouling conditions. Naphtha cooler, an industrial HE utilized in petroleum refineries, employs cooling water to lower Naphtha temperature, but the high impurities in the recycled cooling …

Application Of Learning Processes For Improving Last-Mile Logistics Optimization At Scale, Seyedeh Shaghayegh Rabbanian

LSU Doctoral Dissertations

The escalating demands of omnichannel retailing, rapid urbanization and shifting customer behaviors have propelled last-mile vehicle routing logistics to the forefront of research. This last-mile phase, recognized as a significant contributor to costs and pollution in the supply chain, necessitates efficient route optimization to minimize expenses and environmental impact. This research delves into machine learning based techniques for solving large-scale Vehicle Routing Problem (VRP), a fundamental concern in last-mile logistics, aiming to optimize delivery vehicle routing amidst diverse customer nodes and operational constraints. Three primary research subproblems are analyzed: utilizing machine learning for constructive solutions, Variable Neighborhood Search (VNS) metaheuristic, …