Operations Research, Systems Engineering and Industrial Engineering Commons^™

A New Milp Approach For The Facility Layout Design Problem With Rectangular And L/T Shaped Departments, Yossi Bukchin, Michal Tzur

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In this paper we propose a new approach for the facility layout problem (FLP) and suggest new mixed-integer linear programming (MILP) formulations. The proposed approach considers simultaneously the location of the departments within the facility and the internal arrangement of the machines. Two models are suggested, where the first addresses the rectangular department case and the second allows nonrectangular departments defined by an L/T shape. New regularity constraints are developed to avoid irregular department shapes.

Strategic Design Of A Robust Supply Chain, Marc Goetschalckx, Edward Huang

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The strategic design of a robust supply chain has as goal the configuration of the supply chain structure so that the performance of the supply chain remains of a consistently high quality for all possible future scenarios. We model this goal with an objective function that trades off the central tendency of the supply chain profit with the dispersion of the profit as measured by the standard deviation for any value of the weights assigned to the two components. However, the standard deviation, used as the dispersion penalty for profit maximization, has a square root expression which makes standard maximization …

Evaluating The Effect Of Operational Conditions And Practices On Warehouse Performance, Andrew L. Johnson

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Analyzing warehouse performance across different environments is critical to improving overall productivity and reducing costs. Although two-stage DEA estimators have been shown to be statistically consistent, the finite sample bias of DEA in the first stage carries over to the secondstage regression, which causes bias in the estimated coefficients of the contextual variables. The bias is particularly severe when the contextual variables are correlated with inputs. To address this shortcoming, we apply insights from Johnson and Kuosmanen (2010), who demonstrate that DEA can be formulated as a constrained special case of the Convex Nonparametric Least Squares (CNLS) regression to develop …

Comparing Transport Policies In A Full-Scale 300mm Wafer Manufacturing Facility, J. E. Kiba, S. Dauz`Ere-P´Er`Es, C. Yugma, G. Lamiable

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Research in semiconductor manufacturing ideally wants to determine the “best” transport policy to ensure continuous production. Determining such a policy is difficult because it depends on many factors such as the layout, the product types, the equipment, etc. Most of the transport policies found in the literature combine dispatching policies (scheduling of transport requests) and routing policies (selection of the path to move from one point to another). This paper investigates a policy called "minimum service" which consists in keeping a minimum number of available vehicles in bays, so that they can quickly answer transport requests and empty travel times …

The Human-Centric Warehouse, Kevin R. Gue

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In theory and in practice, the objective of warehouse design has long been to meet operational requirements of throughput and service performance at minimum cost. A natural product of this “bottom line” approach has been warehouse buildings and operations ill-suited to the humans who spend their working lives interacting with them. We offer an explanation for the current approach, and argue that a new approach— a new paradigm —is needed. We then describe a comprehensive approach to warehouse design that includes human well-being as a primary goal.

Forklift Routing In Warehouses Using Dual-Commands And Stackable Pallets, Ahmed Hassan, Bill Ferrell

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This research determines time optimal routes for loading and picking pallets that can be stacked on top of each other during transport in a manual warehouse that only contains full pallets and utilizes single deep storage. This research was motivated by the fact that we are seeing this situation on an ever increasing basis, particularly in warehouses that supply parts to automotive assembly. In practice, forklift drivers have developed strategies to take advantage of this opportunity but to our knowledge there is no literature that addresses this problem rigorously. The important features of this work are that a time based …

Plug-And-Work Material Handling Systems, Kai Furmans, Frank Schonung, Kevin R. Gue

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

One disadvantage of automated material handling systems is their relative Inflexibility: once racks are installed and conveyors are laid, making even mi-nor changes to a system can be cumbersome and expensive. However, recent progress in the capabilities and cost of basic system components, such as controllers, drives, and sensors, has made possible a new class of material handling systems having a much higher degree of flexibility. We propose underlying de- sign principles for such systems and describe several prototype plug-and-work" systems, which feature decentralized control and ease of reconfiguration.

Control Policies For A Dynamic Storage System With Multiple Lifts And Shuttles, Iris F.A. Vis, Hector J. Carlo, Paloma Diaz, Maria E. Laboy, Bruno Vanwijgaarden

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

New types of Automated Storage and Retrieval Systems, able to achieve high throughput levels, are continuously being developed and require new control polices to take full advantage of the developed system. In this paper we study a dynamic storage system as developed by Vanderlande Industries consisting of a conveyor, two lifts, multiple transfer shuttles, and a storage rack. One of the decision problems for this system is the scheduling problem of the two lifts. In other words, which lift is going to handle which request and in which order. In this paper, we derive an integrated look-ahead heuristic based on …

Digital Human Models Of People With Disabilities, Ron Hamameh

Wayne State University Theses

The current state-of-the-art in Digital Human Modeling (DHM) allows for full simulation and analysis of any task a person is required to perform at home, at work, in the military, in space, in sports, etc. The problem is that the software is missing a very important population: people with physical disabilities. What modifications and enhancements must be made to existing, commercially available DHM software to include this population?

Low-Cost Obstacle Detection Sensor Array For Unmanned Agricultural Vehicles, Santosh Pitla, Joe D. Luck, Scott A. Shearer

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

Mobile robots deployed for agricultural applications must operate in harsh environments where they encounter a variety of both moveable and immovable obstacles. Typically, robots utilize vision sensors to learn about the environment in which they are working. In this study, a low-cost infra-red (IR) sensor array was developed to act as an obstacle detection aid for an unmanned agricultural vehicle (UAgV). The IR sensor array developed consists of six IR sensors mounted on two orthogonal steel plates. The array of sensors was continuously oscillated about the yaw-axis to traverse a 200° field of view in front of the UAgV. Three …

Microbial Treatment Of Swine Fecal Waste To Generate Long-Chain Linear Alkanes After Fast Pyrolysis, Lisa A. Fitzgerald, C. Ziemer, S. E. Lizewski, Bradley R. Ringeisen, K. Henry, Justin C. Biffinger

United States Navy: Publications

Research into the generation of energy from human and animal waste has been primarily focused on gas production (especially methane and hydrogen). While there is some work concentrated on ethanol and biodiesel creation from wastes (fuels used for ground transportation primarily), increasing research interest has been recently directed toward long chain hydrocarbon production for aviation fuels. Kerosene components from swine fecal waste have been generated from four natural sources: undigested dietary lipids, host lipids excreted in feces, bacterial cell walls and products of bacterial fermentation.

Structure–Property Relations Of Cyclic Damage In A Wrought Magnesium Alloy, J. D. Bernard, J. B. Jordon, M. F. Horstemeyer, H. El Kadiri, J. Baird, Dabid Lamb, Alan A. Luo

United States Army: Publications

The fatigue properties of an extruded Mg–3Al–0Mn magnesium alloy component were evaluated experimentally. Fully reversed, strain control fatigue tests were conducted on specimens extracted from regions with a varying grain size and texture. Scanning electron microscopy was employed to establish structure–property relations between microstructure and cyclic damage. Relations were drawn between microstructural features such as particle size, grain size, initial Taylor factor and the number of cycles to failure.

Time And Degree Of Glycemic Derangement Are Associated With Increased Mortality In Trauma Patients In The Setting Of Tight Glycemic Control, Michael G. Corneille, Celina Villa, Steven Wolf, Joel E. Michalek, Inkyung Jung, Charles E. Wade, John G. Meyers, Daniel L. Dent, Deborah Mueller, Ronald M. Stewart

United States Army: Publications

BACKGROUND: Tight glucose control (TGC) may reduce mortality in critically ill trauma patients. We hypothesize that euglycemia is beneficial, and a measure considering time and degree of hyperglycemia is most associated with mortality.

METHODS: We performed a review of intensive care unit trauma patients admitted for more than 3 days between January 2005 and December 2007 on a TGC protocol with a goal of 80 to 110 mg/dL. Hyperglycemic, hypoglycemic, and euglycemic time ranges, and area of interpolated curves above and below 80 to 110 mg/dL were assessed. Associations with mortality were based on logistic regression models adjusted for age, …

Activity Of Topical Antimicrobial Agents Against Multidrug-Resistant Bacteria Recovered From Burn Patients, Jessie S. Glasser, Charles H. Guymon, Katrin Mende, Steven E. Wolf, Duane R. Hospenthal, Clinton K. Murray

United States Army: Publications

Background:

Topical antimicrobials are employed for prophylaxis and treatment of burn
wound infections despite no established susceptibility breakpoints, which are becoming vital in an era of multidrug-resistant (MDR) bacteria. We compared two methods of determining topical antimicrobial susceptibilities.

Methods:

Isolates of Pseudomonas aeruginosa, methicillin-resistant Staphylococcus aureus (MRSA), extended spectrum beta-lactamase (ESBL) producing Klebsiella pneumoniae, and Acinetobacter baumanii-calcoaceticus (ABC) from burn patients were tested using broth microdilution and agar well diffusion to determine minimum inhibitory concentrations (MICs) and zones of inhibition (ZI). Isolates had systemic antibiotic resistance and clonality determined. MDR included resistance to antibiotics in three or more …

Socio-Demographic And Drug Use Factors Associated With Hiv-1 Recombinants And Dual Infections In Northern Thai Drug Users: Associations Of Risk With Genetic Complexity, G. H. Kijak, C. Beyrer, S. Tovanabutra, T. Sripaipan, V. Suriyanon, N. Moqueet, E. Sanders-Buell, P. Saokhieo, U. Timpan, J. Jittiwutikarn, M. L. Robb, D. L. Birx, D. D. Celentano, F. E. Mccutchan

United States Army: Publications

Background:

Dual infection with diverse HIV strains can foster the emergence of recombinants. The resulting  increase in viral genetic diversity is a major challenge for vaccine development HIV treatment. In this study we aim to investigate the socio demographic factors associated with an increasing level of genetic diversity among HIV strains in a population of drug-users in Northern Thailand.

Methods:

From 1999 through 2000, 2231 volunteers were enrolled in the Opiate- Users Research in Chiang Mai, Thailand. HIV subtype analysis was conducted among those HIV-1 seropositive (n = 347) using a multi-region hybridization assay. Social and demographic variables were assessed …

Toxicity And Bioaccumulation Of Tnt In Marine Fish In Sediment Exposures, Guilherme R. Lotufo, William Blackburn, Sydney J. Marlborough, John W. Fleeger

United States Army: Publications

The bioaccumulation potential and toxicity of 2, 4, 6-trinitrotoluene (TNT) spiked to sediment was evaluated in juvenile sheeps head minnows (JSHM, Cyprinodon variegatus) and adult freckled blennies (FB, Hypsoblennius ionthas). The JSHM were exposed for 4 days in the presence or absence of a mesh separating fish from sediment. FB were exposed to sediment for 7 days. During the 24-day storage period(4 °C), extensive transformation of spiked TNT occurred and concentrations are expressed as the sum of TNT, aminodinitrotoluenes and diaminonitrotoluenes (Sum TNT), on a dry weight basis. Sum TNT in the overlying water, not exchanged during exposure, …

Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management, Ra'ed M. Jaradat, Rani A. Kady, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Risk managers are constantly faced with the challenge of making decisions at various levels of their organizations. One of the challenges, which often times is unavoidable, lies in assigning a monetary value to human risks. Such challenge necessitates engineering managers to make educated decisions on the level of risk that the organizations and businesses should accept when it comes to human. The purpose of this study is to suggest a suitable framework that captures this aspect of engineering Risk Management in order to make rational and sustainable decisions about such assessed risk. This will be accomplished by exploring the tools, …

Investigating Fabrication Methods For Micro Single-Chamber Solid Oxide Fuel Cells, Man Yang

Dissertations

A Solid Oxide Fuel Cell (SOFC) is a green energy technology that offers a cleaner and efficient alternative to fossil fuels. The efficiency and utility of SOFCs can be enhanced by fabricating miniaturized component structures within the fuel cell footprint. This research focuses on the microfabrication of parallel-connected inter-digitized design of micro single chamber SOFC (µ-SC-SOFCs). In this dissertation, candidate micro/nano fabrication techniques to precisely fabricate micro patterns on planar substrates have been studied. These include EBL, soft lithography, photolithography, and direct-writing. After analyzing preliminary results, two combinational approaches were further investigated. The first method involves the combination of the …

Project And Risk Management: A Systematic Approach, Baqer Alali, C. Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The main purpose of this paper is to discuss three related topics of project management, systems management, and risk management. The issue that would be addressed in this paper is how risks are addressed in project and systems management, and how risks are propagated between projects and systems. A framework is proposed to overcome the problem of risk propagation from project to the systems. It was shown that the proposed framework can be deployed to existing risk management process with reasonable interventions (e.g. process prescribed by PMI). Finally a proof-of-concept application shows potential of the framework for various types of …

Enterprise Business Alignment Using Quality Function Deployment, Multivariate Data Analysis And Business Modeling Tools, Diala Gammoh

Electronic Theses and Dissertations

This dissertation proposes two novel ideas to enhance the business strategy alignment to customer needs. The proposed business alignment clock is a new illustration to the relationships between customer requirements, business strategies, capabilities and processes. To line up the clock and reach the needed alignment for the enterprise, a proposed clock mechanism is introduced. The mechanism integrates the Enterprise Business Architecture (EBA) with the House of Quality (HoQ). The relationship matrix inside the body of the house is defined using multivariate data analysis techniques to accurately measure the strength of the relationships rather than defining them subjectively. A statistical tool, …