Operations Research, Systems Engineering and Industrial Engineering Commons^™

Disaster Relief Models: Location Of Points Of Distribution, Othman Boudhoum

Industrial Engineering Undergraduate Honors Theses

This project consists of developing a Location Allocation model that focuses on determining the locations of relief supply Points of Distribution (PODs) after a natural disaster and how to assign demand points to them. According to FEMA, PODs are “centralized locations where the public picks up life sustaining commodities following a disaster or emergency” [1]. After each disaster, decisions have to be made to ensure a good delivery of resources in a timely manner. The road infrastructure may be damaged due to the disaster. Some roads might become inoperable, and some bridges are expected to fail. The model studied in …

Testing Virtual Machines For Cadrc Server Hosting, Robin Verweij

Computer Science and Software Engineering

No abstract provided.

Relative Value Iteration For Average Reward Semi-Markov Control Via Simulation, Abhijit Gosavi

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper studies the semi-Markov decision process (SMDP) under the long-run average reward criterion in the simulation-based context. Using dynamic programming, a straightforward approach for solving this problem involves policy iteration; a value iteration approach for this problem involves a transformation that induces an additional computational burden. In the simulation-based context, however, where one seeks to avoid the transition probabilities needed in dynamic programming, value iteration forms a more convenient route for solution purposes. In this paper, hence, we present (to the best of knowledge for the first time) a relative value iteration algorithm for solving average reward SMDPs via …

A Dynamic Programming Approach To Achieving An Optimal End State Along A Serial Production Line, Shih-Fen Cheng, Blake E. Nicholson, Marina A. Epelman, Daniel J. Reaume, Robert L. Smith

Research Collection School Of Computing and Information Systems

In modern production systems, it is critical to perform maintenance, calibration, installation, and upgrade tasks during planned downtime. Otherwise, the systems become unreliable and new product introductions are delayed. For reasons of safety, testing, and access, task performance often requires the vicinity of impacted equipment to be left in a specific “end state” when production halts. Therefore, planning the shutdown of a production system to balance production goals against enabling non-production tasks yields a challenging optimization problem. In this paper, we propose a mathematical formulation of this problem and a dynamic programming approach that efficiently finds optimal shutdown policies for …

Single-Depot Vehicle Routing Problem For Home Delivery Of Pharmaceutical Products, Kimberly Starr Harms

Masters Theses

Some retail pharmacies offer home delivery services to establish a competitive advantage in the growing healthcare market. The handling of orders for home delivery includes several internal and external processing and transportation activities. In this work, models were developed for use in a pharmacy delivery system to assist personnel in their daily activities. This work includes standard operating procedures for picking, packing and loading of delivery orders and the assignment and routing of vehicles to deliver customer orders. Results from simulated delivery areas identified interesting tradeoffs when comparing densely populated areas to sparsely populated areas. In addition, recommendations for order …

College Football Rankings: An Industrial Engineering Approach, Brent H. Wiles

Industrial Engineering Undergraduate Honors Theses

In using an industrial engineering approach, we utilize optimization and mathematical modeling techniques to rank college football teams when viewed as a quadratic assignment problem.

Characteristics And Contributing Factors Of Emergency Vehicle Crashes, Naji Abdelwanis

All Dissertations

The purpose of this study is to determine the contributing factors and characteristics associated with emergency vehicle(EV) crashes in order to generate insights about the emergency crashes. This dissertation consists of three approaches to address the purpose. In the first analysis a binary logistic regression model was used to identify the critical factors associated with EV crashes that resulted in fatality compared to those that did not. In the second analysis, an ordered regression model was used to identify critical factors that contributed to the severity of injuries that EV occupants experience in crashes as well as the effect of …

Use Of Polymer Rapid Tools As Functional Injection Mold Tooling, Sean Derrick

Masters Theses

Conventional tool making for injection molded plastics is expensive, time consuming, and generates a great deal of waste. Presently, industry is waiting for what is commonly referred to as Rapid Tooling (RT). The greatest opportunity for RT implementation would be the use of Additively Manufacturing (AM) technology. Specifically, AM techniques which use a high strength polymer resin substrate.

The following research is an initial feasibility study to determine if Polymer Rapid Tools (PRTs) could be used as functional injection mold tooling. The objective of the research was to determine if a PRT could mold a variety of features to a …

Social Media For Supply Chain Risk Management, Xiuju Fu, Rick S. M. Goh, J. C. Tong, Loganathan Ponnanbalam, Xiaofeng Yin, Zhaoxia Wang, H. Y. Xu, Sifei Lu

Research Collection School Of Computing and Information Systems

With the rapid increase of online social network users worldwide, social media feeds have become a rich and valuable information resource and attract great attention across diversified domains. In social media data, there are abundant contents of two-way and interactive communication about products, demand, customer services and supply. This makes social media a valuable channel for listening to the voices from the market and measuring supply chain risks and new market trends for companies. In this study, we surveyed the potential value of social media in supply chain risk management (SCRM) and examined how they can be applied to SCRM …

An Agent-Based Simulation Approach To Experience Management In Theme Parks, Shih-Fen Cheng, Larry Junjie Lin, Jiali Du, Hoong Chuin Lau, Pradeep Reddy Varakantham

Research Collection School Of Computing and Information Systems

In this paper, we illustrate how massive agent-based simulation can be used to investigate an exciting new application domain of experience management in theme parks, which covers topics like congestion control, incentive design, and revenue management. Since all visitors are heterogeneous and self-interested, we argue that a high-quality agent-based simulation is necessary for studying various problems related to experience management. As in most agent-base simulations, a sound understanding of micro-level behaviors is essential to construct high-quality models. To achieve this, we designed and conducted a first-of-its-kind real-world experiment that helps us understand how typical visitors behave in a theme-park environment. …

Dynamic Queue Management For Hospital Emergency Room Services, Kar Way Tan

Dissertations and Theses Collection (Open Access)

The emergency room (ER) – or emergency department (ED) – is often seen as a place with long waiting times and a lack of doctors to serve the patients. However, it is one of the most important departments in a hospital, and must efficiently serve patients with critical medical needs. In the existing literature, addressing the issue of long waiting times in an ED often takes the form of single-faceted queue-management strategies that are either from a demand perspective or from a supply perspective. From the demand perspective, there is work on queue design such as priority queues, or queue …

Systematic Parameter Analysis For Selective Laser Melting (Slm) Of Silver-Based Materials., Harald Rieper

Electronic Theses and Dissertations

Selective Laser Melting (SLM) is a growing technology for the additive manufacturing of parts and structures. Based on a powder layer technique, a laser locally melts the powder and forms new structures. [1] In this approach, silver-based alloy powders will be used. The processing of this kind of material is considered difficult compared to other powder materials such as mild steels or tool steels. Silver powder is a highly reflecting material and has excellent thermal conductivity. Both properties make it difficult to process using Selective Laser Melting. Due to its high price, industries use silver parts as economically as possible …

Linking Corporate Strategy To Operations : A Critical Review Of Prof. Kaplan’S Theories And The Development Of A Best-Practice Approach., Alexander Bogner

Electronic Theses and Dissertations

The rising speed of change in global frameworks drives international companies into a non-stop changing organization with the need of generating optimal revenues under changing conditions. Regarding to the need to be a flexible and competitive organization the value of a vision and a perfectly streamed strategy to this vision becomes a main success factor for global business. The trend for the need of development of a clear and constant strategy is equally rising with the trend of globalization and intercontinental business companies and therefor the business of strategy consulting rises constantly from the late 1990. Most of the strategy …

The Effects Of Football Helmet Pressure On The Shock Taken During A Controlled Impact, Sullivan Grosz

Industrial Technology and Packaging

College and NFL football teams are focusing their efforts on protecting players more than ever before. With the recent attention on concussions and the troubling long-term effects of head injuries, more research is needed to find ways to ensure players have the adequate protection. The helmets being used have a hard polycarbonate shell with four inner pads that fit tight to the player’s head. These pads are filled with air.

The purpose of the testing and project is to find an ideal air pressure that helmets need to maintain in order to protect the player to the best of its …

Predicting Surgical Flow Disruption Recovery In Cardiothoracic Operating Rooms, Gary Palmer Ii

All Dissertations

Disruptions are common occurrences in a variety of healthcare settings and early research has shown that they are likely contributors to medical errors. For this reason, healthcare researchers have focused on studying and understanding the nature of Surgical Flow Disruptions (SFDs) to increase patient safety and quality of care within the operating room (OR). Many researchers have used simplistic taxonomies to collect and categorize the types of SFD that occur within the OR. Others have gone further to study SFD recovery and have link unrecovered and recovered SFD to minor and major adverse events experienced by patients. This dissertation, focused …

Hybrid Low-Order Modeling For Conceptual Vehicle Design, Robert Mau

All Dissertations

Design freedom, and particularly the freedom to incorporate innovative designs and strategies, is greatest at the very beginning of vehicle conceptual design. Conversely, this is when the least knowledge of the product exists. As product content decisions are made the level of freedom in the design decreases and the design becomes "locked in." The majority of vehicle lifecycle cost is also set by the end of vehicle conceptual design. This makes it critical to make well-informed and validated decisions in the concept design phase to avoid expensive iterations and redesign in the detailed design phase. Parametric vehicle modeling permits rapid …

Decision Trees To Model The Impact Of Disruption And Recovery In Supply Chain Networks, Loganathan Ponnanbalam, L. Wenbin, Xiuju Fu, Xiaofeng Yin, Zhaoxia Wang, Rick S. M. Goh

Research Collection School Of Computing and Information Systems

Increase in the frequency of disruptions in the recent times and their impact have increased the attention in supply chain disruption management research. The objective of this paper is to understand as to how a disruption might affect the supply chain network - depending upon the network structure, the node that is disrupted, the disruption in production capacity of the disrupted node and the period of the disruption - via decision trees. To this end, we first developed a 5-tier agent-based supply chain model and then simulated it for various what-if disruptive scenarios for 3 different network structures (80 trials …

Improving Patient Length-Of-Stay In Emergency Department Through Dynamic Queue Management, Kar Way Tan, Hoong Chuin Lau, Francis Chun Yue Lee

Research Collection School Of Computing and Information Systems

Addressing issue of crowding in an Emergency Department (ED) typically takes the form of process engineering or single-faceted queue management strategies such as demand restriction, queue prioritization or staffing the ED. This work provides an integrated framework to manage queue dynamically from both demand and supply perspectives. More precisely, we introduce intelligent dynamic patient prioritization strategies to manage the demand concurrently with dynamic resource adjustment policies to manage supply. Our framework allows decision-makers to select both the demand-side and supply-side strategies to suit the needs of their ED. We verify through a simulation that such a framework improves the patients' …

Acuta Enews November 2013 Vol. 42, No. 11

ACUTA Newsletters

In this Issue...

1 The Concept of Context-Aware Computing

2 Nominate Now for Ruth A. Michalecki Leadership Award

3 Collaboration Is Not Automatic

4 Nominations for Board of Directors: Deadline November 18

5 Free Webinar: The Evolution of Control Systems Security Brief

5 What's on Your Desk?

6 Bring 8 Fall Seminar Sessions to Your Desktop or Tablet

6 Thanks to Fall Seminar Exhibitors 6 Sponsors

6 Get Your Logos Here

7 Info Links

8 Add Names from Your Campus to Your ' ACUTA Roster

8 Board Report

9 Welcome New Members

9 Check It Out

Extreme Learning Machines, Erik Cambria, Guang Bin Huang, Liyanaarachchi Lekamalage Chamara Kasun, Hongming Zhou, Chi Man Vong, Jiarun Lin, Jianping Yin, Zhiping Cai, Qiang Liu, Kuan Li, Victor C.M. Leung, Liang Feng, Yew Soon Ong, Meng Hiot Lim, Anton Akusok, Amaury Lendasse, Francesco Corona

Engineering Management and Systems Engineering Faculty Research & Creative Works

No abstract provided.