Operations Research, Systems Engineering and Industrial Engineering Commons^™

Service Consistency In Vehicle Routing, Kunlei Lian

Graduate Theses and Dissertations

This thesis studies service consistency in the context of multi-period vehicle routing problems (VRP) in which customers require repeatable services over a planning horizon of multiple days. Two types of service consistency are considered, namely, driver consistency and time consistency. Driver consistency refers to using the fewest number of different drivers to perform all of the visits required by a customer over a planning horizon and time consistency refers to visiting a customer at roughly the same time on each day he/she needs service. First, the multi-objective consistent VRP is defined to explore the trade-offs between the objectives of travel …

Optimizing The B.O.B., Valerie N. Washington, Douglas Starzec

KSU Journey Honors College Capstones and Theses

The Kennesaw State University Department of Transportation manages the Big Owl Bus (B.O.B.). The B.O.B. has 9 routes which provide transportation around and between the Kennesaw and Marietta campuses, as well as to select off-campus apartment complexes and shopping centers. We utilized a number of methodologies to recommend improvements to the efficiency and accessibility of the B.O.B. We first used the vehicle routing problem to develop a binary integer linear programming model. This allowed us to determine a new set of routes that minimize total travel time across the routes. Next, we developed an integer non-linear programming model to assign …

Computer Simulation Of The Attitude Of Lunar Icecube During Early Operations And Deployment, Johnathon F. Fitzpatrick

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Jonathan F. Fitzpatrick on April 21, 2017.

Mapping And Integrating Value Creation Factors With Life-Cycle Stages For Sustainable Manufacturing, P. Bilge, S. Emec, G. Seliger, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Instead of implementing each element individually, engineers must be aware of multiple interactions among all major value creation factors and their life-cycle stages. Interactions are analyzed by a set of factors and hierarchical levels within a production system based on empirical observations and described in analytical models. Such analyses and missing information about the current condition of the system and its parts remain limited to addressing specific aspects of interactions among factors and stages for multiple decision making. To build a case-based scope addressing the interactions among a set of factors and life-cycle stages, a comprehensive approach for mapping and …

Opening Autonomous Airspace–A Prologue, Samuel M. Vance

International Journal of Aviation, Aeronautics, and Aerospace

The proliferation of Unmanned Aerial Vehicles (UAV), and in particular small Unmanned Aerial Systems (sUAS), has significant operational implications for the Air Traffic Control (ATC) system of the future. Integrating unmanned aircraft safely presents long-standing challenges, especially during the lengthy transition period when unmanned vehicles will be mixed with piloted vehicles. Integration of dissimilar systems is not an easy, straight-forward task and in this case is complicated by the difficulty to truly know what is present in the airspace. Additionally, there are significant technology, security and liability issues that will need resolution to ensure property and life are protected and …

Brain Lesions Among Orally Fed And Gastrostomy-Fed Dysphagic Preterm Infants: Can Routine Qualitative Or Volumetric Quantitative Magnetic Resonance Imaging Predict Feeding Outcomes?, Nasser H. Kashou, Irfaan Akram Dar, Mohamed A. El-Mahdy, Charles Pluto, Mark Smith, Ish K. Gulati, Warren Lo, Sudarshan R. Jadcherla

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Introduction: The usefulness of qualitative or quantitative volumetric magnetic resonance imaging (MRI) in early detection of brain structural changes and prediction of adverse outcomes in neonatal illnesses warrants further investigation. Our aim was to correlate certain brain injuries and the brain volume of feeding-related cortical and subcortical regions with feeding method at discharge among preterm dysphagic infants.

Materials and methods: Using a retrospective observational study design, we examined MRI data among 43 (22 male; born at 31.5 ± 0.8 week gestation) infants who went home on oral feeding or gastrostomy feeding (G-tube). MRI scans were segmented, and volumes of brainstem, …

Decision Support Models For A Few Critical Problems In Transportation System Design And Operations, Ran Zhang

USF Tampa Graduate Theses and Dissertations

Transportation system is one of the key functioning components of the modern society and plays an important role in the circulation of commodity and growth of economy. Transportation system is not only the major influencing factor of the efficiency of large-scale complex industrial logistics, but also closely related to everyone’s daily life. The goals of an ideal transportation system are focused on improving mobility, accessibility, safety, enhancing the coordination of different transportation modals and reducing the impact on the environment, all these activities require sophisticated design and plan that consider different factors, balance tradeoffs and maintaining efficiency. Hence, the design …

Strategies For Reducing Preventable Hospital Readmissions On Medicare Patients, Andres Patricio Garcia-Arce

USF Tampa Graduate Theses and Dissertations

The high expenditure of healthcare in the United States (U.S.) does not translate into better quality of care. Indeed, the U.S. healthcare system is recognized by its lack of efficiency and waste (which represents about 20% of the country’s healthcare expenses). Lack of coordination is one of the most referenced causes of waste in the U.S. healthcare system, and preventable hospital readmissions have been acknowledged to be evidence of poor coordination of care. In fiscal year 2013, the Centers for Medicare and Medicaid Services (CMS) established financial penalties for inpatient care reimbursements in hospitals with excessive readmissions. All the same, …

Design And Optimization Of An Explosive Storage Policy In Internet Fulfillment Warehouses, Sevilay Onal

Dissertations

This research investigates the warehousing operations of internet retailers. The primary physical process in internet retail is fulfillment, which typically involves a large internet fulfillment warehouse (IFW) that has been built and designed exclusively for online sales and an accompanying parcel delivery network. Based on observational studies of IFW operations at a leading internet retailer, the investigations find that traditional warehousing methods are being replaced by new methods which better leverage information technology and efficiently serve the new internet retail driven supply chain economy. Traditional methods assume a warehouse moves bulk volumes to retail points where the bulks get broken …

Comparing Critical Chain Project Managemenet With Critical Path Method: A Case Study, Behzad Montazeri

Masters Theses & Specialist Projects

Scheduling is a major task in project management. The current scheduling technique, Critical Path Method (CPM), has been widely applied for several decades, but a large number of projects fail to be completed on time and schedule delays occur in many projects. This raises question about the validity of the current project scheduling system. Critical Chain Project Management (CCPM), derived from Theory of Constraints, is a relatively new alternative approach toward scheduling projects. This study compared CCPM and CPM to determine which scheduling method delivers a shorter project duration and has a better usage of resources. A scheduling software called …

Analysis Of Project Management System Structure Using The Viable System Model (Vsm), Joseph A. Sisti

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to explore the applicability of the Viable System Model as a framework for structural analysis of Project Management Systems using a case study approach. The research used a modified Viable System Model based on the work of Stafford Beer (1979) for the analysis of systems (organizations). The specific research questions explored in this research were: (1) How can the Viable System Model (VSM) be adapted for analysis of project management structure? And, (2) What results from exploration of the Viable System Model framework application to active project management structures?

The research used an exploratory …

A Predictor Analysis Framework For Surface Radiation Budget Reprocessing Using Design Of Experiments, Patricia Allison Quigley

Engineering Management & Systems Engineering Theses & Dissertations

Earth’s Radiation Budget (ERB) is an accounting of all incoming energy from the sun and outgoing energy reflected and radiated to space by earth’s surface and atmosphere. The National Aeronautics and Space Administration (NASA)/Global Energy and Water Cycle Experiment (GEWEX) Surface Radiation Budget (SRB) project produces and archives long-term datasets representative of this energy exchange system on a global scale. The data are comprised of the longwave and shortwave radiative components of the system and is algorithmically derived from satellite and atmospheric assimilation products, and acquired atmospheric data. It is stored as 3-hourly, daily, monthly/3-hourly, and monthly averages of 1°x1° …

Revisiting The One-Sided Ewma Control Chart Design, Duy Anh Duong-Tran

Masters Theses

Over the past half-century, Exponential Weighted Moving Average (EWMA) control charts have been widely used in Statistical Process Control to detect small and persistent process shifts. In theory, EWMA control limits monotonically increase over time to account for the continual growth of the EWMA statistic’s variance. These control limits are often assumed constant and are set to their respective asymptotic limits. While not theoretically correct, this simplifies the process of applying and analyzing the EWMA control chart while having little effect on the chart’s performance. One-Sided EWMA charts are often implemented when it is only desirable to detect shifts in …

Impact Of A Localized Lean Six Sigma Implementation On Overall Patient Safety And Process Efficiency, Luvianca G. Gil-Moreno

Engineering Management & Systems Engineering Theses & Dissertations

Continuous quality improvement tools have been widely used in the Healthcare Industry to increase efficiency and patient safety as well as to reduce cost. This research explores the impact of a Lean Six Sigma (LSS) process improvement initiative on the overall process efficiency and patient safety in the Labor and Delivery (L+D) units of a large hospital provider. This study focuses on the application of a modeling and simulation methodology to investigate the influence of a localized process improvement intervention on the overall L+D unit output by considering patient flow, system capacity, and unit performance. The simulation models capacity profiles …

Role Of Requirements Engineering In Software Project’S Success, Sujatha Alla

Engineering Management & Systems Engineering Theses & Dissertations

Despite considerable time and resources spent on the initiation phase of software projects, discrepancies often exist between formal project documentation, customer requirements, and final project specifications. Such discrepancies in the requirements management process can have a very negative impact on final project outcomes. A Business Requirements Document (BRD) constitutes the formal software requirements documentation, which typically includes stakeholders’ needs and expectations and project scope while providing a clear project roadmap and project plan. According to IEEE standards, a BRD should be a structured document that includes specific elements such as functional and technical requirements while incorporating certain traits such as …

Developing A Greenometer For Green Manufacturing Assessment, Ahmed H. Salem, Ahmed M. Deif

Industrial Technology and Packaging

In this paper a toolbox (Greenometer) to assess the greenness level of manufacturing companies is proposed. The assessment approach is based on capturing the relative greenness position of any company among other industries from different sectors as well as within the same sector. The assessment was based on selected greenness attributes and their composing indicators at each of the two levels of the developed Greenometer. Geometric Mean Method (GMM) was adopted to be the generic assessment technique for cross industries greenness evaluation, while Data Envelopment Analysis (DEA) was employed to assess the greenness level of intra-industries layer. Three different industrial …

An Investigation Into The Indicators Of A Successful Total Force Association, Greg E. Hoyt

Theses and Dissertations

The Air Force, since adopting and subsequently developing the Total Force concept in the early 1970s, has not thoroughly outlined clear objectives by which the progress toward and realization of this strategic vision should be defined and measured. Without clear definition, direction, and method of evaluation, the ability to credibly claim any subsequent successes or failures in the pursuit of this vision become vulnerable to challenge. Indeed, the mere claim that a single, clear vision exists may be challenged. The Total Force concepts degree of success has, on multiple occasions through its history, been critiqued with the most recent instance …

Real-Time Heuristic Algorithms For The Static Weapon-Target Assignment Problem, Alexander G. Kline

Theses and Dissertations

The problem of targeting and engaging individual missiles (targets) with an arsenal of interceptors (weapons) is known as the weapon target assignment problem. As many solution techniques are based upon a transformation of the objective function, their final solutions rarely produce optimal solutions. We propose a nonlinear branch and bound algorithm to provide the first optimization approach to the untransformed problem found in the literature. Further, we propose a new heuristic based upon the branch and bound algorithm which dominates other heuristics explored in optimality gap. We also propose a heuristic based upon the optimal solution to the quiz problem …

A System Dynamics Model Investigating The Efficacy Of Non-Kinetic Policy Strategies On The Diffusion Of Democratic Ideologies In China, Maria S. Phillips

Theses and Dissertations

Shaping the next century of global politics and power, United States-China relations comprise one of the most significant bilateral relationships in the world. A new era of unrestricted warfare is one example of how aggression from China could be very costly for the United States. The growth of democratic ideals within China decreases the risk of detrimental impacts according to democratic peace theory. This thesis explores a multifaceted system of relationships that regulate the diffusion of democratic ideology within China, as defined by a proxy-measure characterized as human rights by Freedom House. Relative deprivation theory coupled with an adapted Bass …

Multi-Plc Exercise Environments For Training Ics First Responders, Joseph K. Daoud

Theses and Dissertations

When systems are targeted by cyber attacks, cyber first responders must be able to react effectively, especially when dealing with critical infrastructure. Training for cyber first responders is lacking and most existing exercise platforms are expensive, inaccessible or ineffective. This paper presents a mobile training platform which incorporates a variety of programmable logic controllers into a single system which facilitates the development of the unique skills required of cyber first responders operating in the realm of industrial control systems. The platform is modeled after a jail in the northeastern United States and was developed to maximize realism. Example training scenarios …