Operations Research, Systems Engineering and Industrial Engineering Commons^™

Impact Of Automonous Delivery And Last-Mile Logistics, Michael G. Kay, Peerapol Sittivijan, Bhagyalakshmi V. Shrikrishna, Bharat Kulkarni

International Material Handling Research Colloquium

Poster 19

15th International Material Handling Research Colloquium Program, College Industry Council On Material Handling Education, Mhi

International Material Handling Research Colloquium

Official Conference Program

An Optimal Airline Revenue Management Seat Pricing Plan Model, Constantine M. Koursaris, James W. Marion Jr.

International Journal of Aviation, Aeronautics, and Aerospace

The goal of an airline is to sell tickets at the highest fare possible, thus yielding maximum profit for the stakeholders. As airline seat pricing is divided into different fare classes, a revenue management system is created and maintained to identify opportunity costs where the airline may sell an optimum number of available seats in both discounted fare and full fare classes. Ideally, under perfect conditions, the airline will sell all available seats at full capacity for each leg of a trip. Under non-ideal conditions for the airline, not all available seats may sell at either full fare or discounted …

In Vitro Cytocompatibility Of Antibacterial Levels Of Polymer Nitric Oxide Release, Rana Gbyli, Christina Zito, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

Although the antibacterial property of nitric oxide (NO) has been well documented in gram positive and gram negative bacteria cultures, its cytotoxic effects are not completely clear. To limit potential in vivo cytotoxicity, our group recently investigated the effects of a range of NO fluxes on S. epidermidis and S. aureus to determine a minimum effective NO level. In this study, we report the antibacterial function of this minimum NO level also on gram negative Pseudomonas aeruginosa as well as its cytocompatibility effects on lung and kidney cells. Standardized bacterial cultures were treated with NO releasing PDMS substrates followed by …

Computational Fluid Dynamics Modeling And In Situ Physics-Based Monitoring Of Aerosol Jet Printing Toward Functional Assurance Of Additively-Manufactured, Flexible And Hybrid Electronics, Roozbeh (Ross) Salary

Graduate Dissertations and Theses

Aerosol jet printing (AJP)—a direct-write, additive manufacturing technique—has emerged as the process of choice particularly for the fabrication of flexible and hybrid electronics. AJP has paved the way for high-resolution device fabrication with high placement accuracy, edge definition, and adhesion. In addition, AJP accommodates a broad range of ink viscosity, and allows for printing on non-planer surfaces. Despite the unique advantages and host of strategic applications, AJP is a highly unstable and complex process, prone to gradual drifts in machine behavior and deposited material. Hence, real-time monitoring and control of AJP process is a burgeoning need. In pursuit of this …

Understanding Transit System Performance Using Avl-Apc Data: An Analytics Platform With Case Studies For The Pittsburgh Region, Xidong Pi, Mark Egge, Jackson Whitmore, Amy Silbermann, Zhen Sean Qian

Journal of Public Transportation

This paper introduces a novel transit data analytics platform for public transit planning, assessing service quality and revealing service problems in high spatiotemporal resolution for public transit systems based on Automatic Passenger Counting (APC) and Automatic Vehicle Location (AVL) technologies. The platform offers a systematic way for users and decision makers to understand system performance from many aspects of service quality, including passenger waiting time, stop-skipping frequency, bus bunching level, bus travel time, on-time performance, and bus fullness. The AVL-APC data from September 2012 to March 2016 were archived in a database to support the development of a user-friendly web …

A Representation Of Tactical And Strategic Precursors Of Supply Network Resilience Using Simulation Based Experiments, Yaneth C. Correa-Martinez

Engineering Management & Systems Engineering Theses & Dissertations

Modern supply chains are becoming increasingly complex and are exposed to higher levels of risk. Globalization, market uncertainty, mass customization, technological and innovation forces, among other factors, make supply networks more susceptible to disruptions (both those that are man-made and/or ones associated with natural events) that leave suppliers unavailable, shut-down facilities and entail lost capacity.

Whereas several models for disruption management exist, there is a need for operational representations of concepts such as resilience that expand the practitioners’ understanding of the behavior of their supply chains. These representations must include not only specific characteristics of the firm’s supply network but …

Robust Assignment Of Customer Orders With Uncertain Configurations In A Production Network For Aircraft Manufacturing, Jens Buergin, Philippe Blaettchen, Juri Kronenbitter, Katharina Molzahn, Yannick Schweizer, Caroline Strunz, Manuel Almagro, Frank Bitte, Stephan Ruehr, Marcello Urgo, Gisela Lanza

Research Collection Lee Kong Chian School Of Business

Production of multi-variant products in a network requires the assignment of customer orders to locations and periods. This is a highly complex planning task, as requirements of procurement, production, distribution, and sales have to be considered. Providing customers with the flexibility of configuring their ordered products after order assignment further increases the complexity of the planning task by taking uncertainty into account. Therefore, a robust optimisation model, using scenarios representing potential customer-specific order configurations, is introduced. By providing enough flexibility to handle maximum work overload caused by the potential order configurations at locations, a robust assignment of orders can be …

Tooling For Injection Molding Using Laser-Powder Bed Fusion., Mohith Ram Buxani

Electronic Theses and Dissertations

Laser-Powder Bed Fusion (L-PBF) has been considered for some time by the injection molding industry for the fabrication of tooling for injection molding in order to address large lead times and costs for tool-making. Computer-aided simulations are also routinely used to evaluate new part and mold designs as well as understanding the effects of material compositions and processing conditions on part quality and overall productivity. However, there remains a significant need to integrate the perspectives from injection molding, 3D printing, metal powders, and component design and process simulation to better utilize LPBF for fabricating tooling required for injection molding. The …

Systems Engineering Analysis For Optimum Selection Protocol For Thermal Expansion Measurement Of A Carbon Fiber Reinforced Composite Tube, Ronald Uchimiya

LMU Theses and Dissertations

A material’s Coefficient of Thermal Expansion (CTE) is a valuable physical property, particularly for structural fiber reinforced composites that are routinely used in satellite/aerospace applications. Satellite space structures are routinely designed with a high degree of dimensional and thermal stability. Designing and verifying for near zero CTE performance is a common design requirement. The CTE is routinely a physical property with known values for common materials. However, the strength, stiffness and CTE properties on a multi-ply graphite fiber reinforced laminate composite can be tailored to specific engineering requirements. Because of this, a method of verification (testing) is routinely performed to …

Assessing The Tensile And Fatigue Behavior Of Aerosol Jet Printed Nano Silver Particle Traces On Polyimide Substrates, Roshan Muralidharan

Graduate Dissertations and Theses

Flexible interconnects are integral to flexible hybrid electronics. Aerosol jet, inkjet or screen printing offer various advantages and disadvantages compared to electroplating, but the behavior of printed metal traces under various types of loading is very different and not yet well understood. This thesis presents an assessment of the electromechanical behavior of aerosol jet printed Nano silver particles on two common polyimide substrates, Upilex and Kapton.

There are many different aspects to electromechanical testing of flexible interconnects, but this work focuses on the effects of tension and cyclic loading. In comparison to the much more widely researched electroplated copper or …

Adopt: Combining Parameter Tuning And Adaptive Operator Ordering For Solving A Class Of Orienteering Problems, Aldy Gunawan, Hoong Chuin Lau, Kun Lu

Research Collection School Of Computing and Information Systems

Two fundamental challenges in local search based metaheuristics are how to determine parameter configurations and design the underlying Local Search (LS) procedure. In this paper, we propose a framework in order to handle both challenges, called ADaptive OPeraTor Ordering (ADOPT). In this paper, The ADOPT framework is applied to two metaheuristics, namely Iterated Local Search (ILS) and a hybridization of Simulated Annealing and ILS (SAILS) for solving two variants of the Orienteering Problem: the Team Dependent Orienteering Problem (TDOP) and the Team Orienteering Problem with Time Windows (TOPTW). This framework consists of two main processes. The Design of Experiment (DOE) …

Sequence-Based Simulation-Optimization Framework With Application To Port Operations At Multimodal Container Terminals, Mariam Aladdin Kotachi

Engineering Management & Systems Engineering Theses & Dissertations

It is evident in previous works that operations research and mathematical algorithms can provide optimal or near-optimal solutions, whereas simulation models can aid in predicting and studying the behavior of systems over time and monitor performance under stochastic and uncertain circumstances. Given the intensive computational effort that simulation optimization methods impose, especially for large and complex systems like container terminals, a favorable approach is to reduce the search space to decrease the amount of computation.

A maritime port can consist of multiple terminals with specific functionalities and specialized equipment. A container terminal is one of several facilities in a port …

A Framework For Executable Systems Modeling, Matthew Amissah

Engineering Management & Systems Engineering Theses & Dissertations

Systems Modeling Language (SysML), like its parent language, the Unified Modeling Language (UML), consists of a number of independently derived model languages (i.e. state charts, activity models etc.) which have been co-opted into a single modeling framework. This, together with the lack of an overarching meta-model that supports uniform semantics across the various diagram types, has resulted in a large unwieldy and informal language schema. Additionally, SysML does not offer a built in framework for managing time and the scheduling of time based events in a simulation.

In response to these challenges, a number of auxiliary standards have been offered …

Throughput And Yield Improvement For A Continuous Discrete-Product Manufacturing System, Md Shahriar J. Hossain

LSU Doctoral Dissertations

A seam-welded steel pipe manufacturing process has mainly four distinct major design and/or operational problems dealing with buffer inventory, cutting tools, pipe sizing and inspection-rework facility. The general objective of this research is to optimally solve these four important problems to improve the throughput and yield of the system at a minimum cost.

The first problem of this research finds the optimal buffer capacity of steel strip coils to minimize the maintenance and downtime related costs. The total cost function for this coil feeding system is formulated as a constrained non-linear programming (NLP) problem which is solved with a search …

A Framework And Exploration Of A Cybersecurity Education Escape Room, Justin Charles Snyder

Theses and Dissertations

This thesis presents a review of educational-escape-room literature followed by a design-oriented framework (the Snyder Escape Room Framework or SERF) and demonstrates the potential efficacy of escape-rooms in cybersecurity education. Several authors have proposed frameworks and guidelines for game and educational design regarding escape rooms. This work coalesces some of those ideas into a more substantial and comprehensive framework (SERF) that designers can use when developing educational escape rooms. The Snyder Escape Room Framework provides heuristics for goals and objectives, players, activities, context, trajectory design, and evaluation. Additionally, this work describes and analyzes the novel prototyped BYU GCC escape room …

A Web Page Classifier Library Based On Random Image Content Analysis Using Deep Learning, Leonardo Espinosa Leal, Amaury Lendasse, Kaj Mikael Björk, Anton Akusok

Engineering Management and Systems Engineering Faculty Research & Creative Works

In This Paper We Present a Methodology and the Corresponding Python Library1 for the Classification of Webpages. the Method Retrieves a Fixed Number of Images from a Given Webpage, and based on Them Classifies the Webpage into a Set of Established Classes with a Given Probability. the Library Trains a Random Forest Model Built Upon the Features Extracted from Images by a Pre-Trained Neural Network. the Implementation is Tested by Recognizing Weapon Class Webpages in a Curated List of 3859 Websites. the Results Show that the Best Method of Classifying a Webpage among the Classes of Interest is to Assign …

A Project-Based Learning Approach In Teaching Simulation To Undergraduate And Graduate Students, Gokhan Egilmez, Dusan Sormaz, Ridvan Gedik

Engineering and Applied Science Education Faculty Publications

In this study, application of experiential learning into graduate and undergraduate curricula of a industrial system simulation course is presented. Simulation has been among the courses against which students feel uncomfortable or frightened due to heavy software use, prerequisite of probability, and statistics knowledge, and its application requirements. To minimize this fear and improve student’s understanding about the subject matters and have them develop ample skills to build complex models, a project-based learning approach is proposed and used in undergraduate and graduate teaching settings. To achieve the project-based learning goals, a 15-week curriculum is designed to have a balanced lecture …

4-D Printing Of Pressure Sensors And Energy Harvesting Devices For Engineering Education, Tzu-Liang Bill Tseng, Aditya Akundi, Hoejin Kim

Manufacturing & Industrial Engineering Faculty Publications

This paper elaborates on the development of laboratory project modules in the Industrial manufacturing and systems engineering department at The University of Texas El Paso based on Four-Dimensional (4D) printing technology. These modules are aimed at introducing the students to interdisciplinary manufacturing and emerging dimensions in manufacturing technology. 4D printing is a new dimension in additive manufacturing wherein, the 3D printed structures react to the change of parameters within the environment such as temperature, and humidity, resulting in shape change or in functionality such as electricity output, and self-healing. Recently 4D printing of simple devices for pressure sensors application were …

Combination Forecasting Of Stock Index Time Series Based On Cooperative Game Theory, Luo Wei

Journal of System Simulation

Abstract: In view of the characteristics of nonlinear, large amplitude, frequent fluctuations in China's stock market, a prediction method of intelligent composite stock index time series based on the cooperative game is presented. The prediction model of stock index time series is established by using neural network method based on the correlations among the various economic indicators, and the development trend and laws of stock index time series are established by using the improved ARIMA method. The two methods are combined by importing cooperative game method. Simulation results show that the prediction accuracy of the presented method is controlled …