Operations Research, Systems Engineering and Industrial Engineering Commons^™

Supply Chain Risk, Ed Pohl

Operations Management Presentations

Supply chains are becoming more and more extended, leaner, and complicated. Not only has the global economy contributed to the complication and risk of our supply chains, we also face significant potential challenges with technology, economic, environmental changes, and social issues. Practitioners have never experienced so many challenges at one time in their career and these challenges are coming in ways we never anticipated. In this presentation, we will address the nature of supply chain risk in today’s world, how to identify the greatest risks in your supply chain, and strategies for mitigating the risks. Examples of specific risk factors …

(Poster) Internal Restoration And Modernization Of A 1948 Wwii Era Jukebox, Miles Furr, Cristiana Olarinre, Joel Carpenter, Elijah Knox, George Ricco, Paul Talaga, Suranga Dharmarathne

ASEE IL-IN Section Conference

Using Six Sigma guidelines under the sponsorship of The University of Indianapolis in cooperation with the client, Brugh Industrial Engineering, this project is to modernize the functionality and interface of a Rockola Model 1428 Jukebox while maintaining its vintage appeal. The process of modernization includes meeting today's industrial safety standards, incorporating ethernet protocol, and utilizing a programmable logic controller, PLC. The jukebox is a showcase of current automation technology. Lighting has been upgraded from fluorescent and incandescent bulbs to addressable nano pixel LEDs. The amplifier, coin system, and record selection system were revitalized to OEM operation standards. All switches within …

Search And Rescue Operations Forecasting And Optimization, Zachary T. Hornberger

Theses and Dissertations

United States Coast Guard District 14 is responsible for the execution of eleven statutory missions across the Pacific region. Despite having the largest geographic area of responsibility (AOR), District 14 has command of among the fewest resources to accomplish these missions. When search and rescue (SAR) emergencies occur, these events take immediate priority because the ability to rapidly coordinate available assets can be the difference between saving or losing a life. Using historic records of SAR incidents for District 14, we leverage an approach called the stochastic zonal distribution model to evaluate spatiotemporal trends in emergency rates and response strategies …

Fracture Toughness And Fatigue Crack Growth Rate Characterization Of Inconel 718 Formed By Laser Powder Bed Fusion, Charles C. Hohnbaum

Theses and Dissertations

Continuing improvement in the field of AM of metals provides the opportunity for direct fabrication of aerospace parts. AM was once used in large part for rapid prototyping but improvements in technology and increases in the knowledge base of AM materials has provided the opportunity for manufacture of AM parts for operational use. The ability to create low numbers of unique parts without having to invest in expensive tooling provides great economic incentive to utilize this technique. IN718 is the most common high temperature alloy used in the aerospace industry and lends itself readily to formation by LPBF. The superior …

Graph Formalisms And Technologies To Support To Systems Engineering Modeling And Analysis, Mil'yonta Williams

Research Horizons Day Posters

No abstract provided.

A 3d Finite Difference Thermal Model Tailored For Additive Manufacturing, Tom Stockman, Judith A. Schneider, Bryant Walker, John S. Carpenter

PRC-Affiliated Research

Physics-based modeling of metal additive manufacturing (AM) processes is computationally challenging due to the very fine meshing required in both time and space. State-of-the-art numerical models that offer great insight into the process have been developed, but they require powerful computational resources and weeks of processing time. Thus, it is often more time-effective to fabricate multiple builds within the time it takes to complete one simulation prediction, further reinforcing the current trial-and-error approach to optimizing the build parameters. This study presents a simplified approach to the transient thermal modeling of the AM process. The numerical model is designed to run …

A 3d Finite Difference Thermal Model Tailored For Additive Manufacturing, Tom Stockman, Judith A. Schneider, Bryant Walker, John S. Carpenter

PRC-Affiliated Research

Physics-based modeling of metal additive manufacturing (AM) processes is computationally challenging due to the very fine meshing required in both time and space. State-of-the-art numerical models that offer great insight into the process have been developed, but they require powerful computational resources and weeks of processing time. Thus, it is often more time-effective to fabricate multiple builds within the time it takes to complete one simulation prediction, further reinforcing the current trial-and-error approach to optimizing the build parameters. This study presents a simplified approach to the transient thermal modeling of the AM process. The numerical model is designed to run …

A 3d Finite Difference Thermal Model Tailored For Additive Manufacturing, Tom Stockman, Judith A. Schneider, Bryant Walker, John S. Carpenter

PRC-Affiliated Research

Physics-based modeling of metal additive manufacturing (AM) processes is computationally challenging due to the very fine meshing required in both time and space. State-of-the-art numerical models that offer great insight into the process have been developed, but they require powerful computational resources and weeks of processing time. Thus, it is often more time-effective to fabricate multiple builds within the time it takes to complete one simulation prediction, further reinforcing the current trial-and-error approach to optimizing the build parameters. This study presents a simplified approach to the transient thermal modeling of the AM process. The numerical model is designed to run …

An Integrated Approach For Remanufacturing Job Shop Scheduling With Routing Alternatives., Ling Ling Li, Cong Bo Li, Li Li, Ying Tang, Qing Shan Yang

Henry M. Rowan College of Engineering Departmental Research

Remanufacturing is a practice of growing importance due to increasing environmental awareness and regulations. However, the stochastic natures inherent in the remanufacturing processes complicate its scheduling. This paper undertakes the challenge and presents a remanufacturing job shop scheduling approach by integrating alternative routing assignment and machine resource dispatching. A colored timed Petri net is introduced to model the dynamics of remanufacturing process, such as various process routings, uncertain operation times for cores, and machine resource conflicts. With the color attributes in Petri nets, two types of decision points, recovery routing selection and resource dispatching, are introduced and linked with places …

Managing Healthcare Data Assets As A Complex Adaptive System, Katie Clifton

Systems Science Friday Noon Seminar Series

A major project is underway to develop a shared platform for data and analytics in a highly federated healthcare delivery organization. In the status quo data environment, analysts have integrated information from various domains — medical records, claims, membership — to produce a multitude of reports and analysis. Duplicative, mis-aligned, and siloed datasets were created as an unintended consequence.

One objective of the project is to produce outcomes (reports, analysis) that are more standardized and efficient than the status quo without sacrificing adaptability. Standards and practices are being intentionally developed as a mechanism for this emerging system to achieve more …

36% Reduction In Fuel Resupply Using A Hybrid Generator & Battery System For An Austere Location, David J. Chester, Torrey J. Wagner, Douglas S. Dudis

Faculty Publications

The DOD energy policy is to increase energy security resiliency, and mitigate costs in the use and management of energy^[1] Forward operating bases (FOBs) are remote, austere base camps that support an operationally defined mission with a limited or no ability to draw from an energy grid and have historically relied on diesel-powered generators for the primary production of energy.^[2] Generators are sized to meet a theoretical peak demand, but steady state loads are far below this peak, resulting in under-loaded generators.^[3] Under-loaded diesel generators decrease efficiency and increase the need for maintenance, affecting the lifespan of …

Development Of A Myoelectric Detection Circuit Platform For Computer Interface Applications, Nickolas Andrew Butler

Master's Theses

Personal computers and portable electronics continue to rapidly advance and integrate into our lives as tools that facilitate efficient communication and interaction with the outside world. Now with a multitude of different devices available, personal computers are accessible to a wider audience than ever before. To continue to expand and reach new users, novel user interface technologies have been developed, such as touch input and gyroscopic motion, in which enhanced control fidelity can be achieved. For users with limited-to-no use of their hands, or for those who seek additional means to intuitively use and command a computer, novel sensory systems …

An Artificial Bee Colony-Based Hybrid Approach For Waste Collection Problem With Midway Disposal Pattern, Qu Wei, Zhaoxia Guo, Hoong Chuin Lau, Zhenggang He

Research Collection School Of Computing and Information Systems

This paper investigates a waste collection problem with the consideration of midway disposal pattern. An artificial bee colony (ABC)-based hybrid approach is developed to handle this problem, in which the hybrid ABC algorithm is proposed to generate the better optimum-seeking performance while a heuristic procedure is proposed to select the disposal trip dynamically and calculate the carbon emissions in waste collection process. The effectiveness of the proposed approach is validated by numerical experiments. Experimental results show that the proposed hybrid approach can solve the investigated problem effectively. The proposed hybrid ABC algorithm exhibits a better optimum-seeking performance than four popular …

Analogies And Comparisons For Stm Data Bodies, Phillip M. Cunio, Brien Flewelling

Space Traffic Management Conference

Space Traffic Management (STM) has already demonstrated its potential to be extremely data-intensive. The large number of objects on orbit today, if observed constantly throughout their lifetimes, could produce a staggeringly large number of observations that might in turn generate large numbers of orbits. Orbit data with a lengthy time history can be used to produce estimates of maneuver frequency, susceptibility to natural forces such as drag, and (if combined with photometric data) assessments of behavioral patterns of life.

A future of mega-constellations and a growing number of nations and organizations with assets on orbit would make it likely that …

A Statistical Approach For Commercial Space Vehicle Integration Into The National Airspace System, Christopher Hays, Daniel Chu, Pedro Llanos

Space Traffic Management Conference

This paper explores commercial space vehicle (CSV) suborbital flight trajectories in the temporal and spatial domains for CSV integration into the National Airspace System. The research data was collected via the Suborbital Space Flight Simulator (SSFS) housed in the College of Aviation at Embry-Riddle Aeronautical University - Daytona Beach campus, and analyzed using an original MATLAB data analytics tool. This study primarily focuses on statistical trends observed in previously simulated flights supported by three Project PoSSUM (Polar Suborbital Science in the Upper Mesosphere) campaigns comprised of 34 flights and 19 control flights, and to identify relevant milestones in the CSV …

Enhancing Suborbital Science Through Better Understanding Of Wind Effects, Pedro Llanos, Diane Howard

Space Traffic Management Conference

This paper highlights the importance of understanding some key factors, such as winds effects, trajectory and vehicle parameters variations in order to streamline the space vehicle operations and enhance science in the upper mesosphere at about 85 km. Understanding these effects is crucial to refine current space operations and establish more robust procedures. These procedures will involve training new space operators to conduct and coordinate space operations in class E above FL600 airspace within the Air Traffic Organization (ATO).

Space vehicles such as Space Ship Two can spend up to 6 minutes in class E airspace above FL600 after launch. …

Iot And Digitization Will Reconnect System Engineering And Science, John Blyler

Systems Science Friday Noon Seminar Series

The fully connected world is quickly becoming a reality. Architects and developers of this new world must understand both the hardware and software basics of IoT and IIoT systems as well as the proven way to deal with the complexities of the integration of sensors, processors, wireless connectivity, edge to cloud networks, data partitioning and processing, AI, machine language, digital threads and twins, and much more. Such complexity can only be handled with a systems-of-systems (SoS) engineering approach.

But while systems engineering may hold many of the solutions to IoT challenges, systems engineering must evolve from its traditional role. Some …

Project Selection: The $1 Trillion Decisions, Leonard Nethercutt

Operations Management Presentations

This webinar will discuss project selection with a focus on both strategic and fi­nancial factors. Project selection directly influences the future results of a busi­ness either positively or negatively over time. During this presentation, we will examine the important link between strategic management, project management, and operations management to create future results and value. You will learn project selection methods and tips to help your organization make a positive impact on the future of your business.

Optimal Design And Implementation Of Fractal Dipole Antenna Based On Arc Of Trigeminal Tree Structure, Xiaohong Zhang, Xiaoxiao Nan, Yixian Yang

Journal of System Simulation

Abstract: A RFID fractal dipole antenna is designed with the arc of the trigeminal tree structure, which is fed by simple microstrip balun to achieve better impedance matching within employing double parallel line structure and by using the dielectric substrate withε_r=4.4 and tan δ=0.035. The results of electromagnetic property simulation analysis of HFSS show that the return loss can reach 36dB, which is much higher than binary arc-shaped fractal antenna which is 16dB; and the impedance matching is very ideal. By physical processing and testing of the antenna, the measured results are in very good agreement with simulation …

Blind Separation Simulation System Of Sound Signals Based On Time-Frequency Analysis Of Short Time Fourier Transformation, Xiaorong Tong

Journal of System Simulation

Abstract: In order to improve the ability of real-time and separation accuracy, a blind separation algorithm based on time-frequency (TF) analysis of short time Fourier transformation is proposed, and the problems of underdetermined sound signal sorting can be solved effectively. The proposed method avoids some of the drawbacks, relaxes the assumption by allowing the sources to be TF-non-disjoint to a certain extent, and the algorithm can be achieved in the condition of TF-non-disjoint. This method was successfully applied to sound signal sorting system; the time domain waves of signals can be got; and the whole signal sorting process can be …