Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Two-Stage Approach To Ridesharing Assignment And Auction In A Crowdsourcing Collaborative Transportation Platform., Peiyu Luo

Electronic Theses and Dissertations

Collaborative transportation platforms have emerged as an innovative way for firms and individuals to meet their transportation needs through using services from external profit-seeking drivers. A number of collaborative transportation platforms (such as Uber, Lyft, and MyDHL) arise to facilitate such delivery requests in recent years. A particular collaborative transportation platform usually provides a two sided marketplace with one set of members (service seekers or passengers) posting tasks, and the another set of members (service providers or drivers) accepting on these tasks and providing services. As the collaborative transportation platform attracts more service seekers and providers, the number of open …

Vision Sensor Based Action Recognition For Improving Efficiency And Quality Under The Environment Of Industry 4.0, Zipeng Wang, Ruwen Qin, Jihong Yan, Chaozhong Guo

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the environment of industry 4.0, human beings are still an important influencing factor of efficiency and quality which are the core of product life cycle management. Hence, monitoring and analyzing humans' actions are essential. This paper proposes a vision sensor based method to evaluate the accuracy of operators' actions. Each action of operators is recognized in real time by a Convolutional Neural Network (CNN) based classification model in which hierarchical clustering is introduced to minimize the effects of action uncertainty. Warnings are triggered when incorrect actions occur in real time and applications of action analysis of workers on a …

Re-Org: An Online Repositioning Guidance Agent, Muralidhar Konda, Pradeep Varakantham, Aayush Saxena, Meghna Lowalekar

Research Collection School Of Computing and Information Systems

No abstract provided.

Application Of The Gradient Projection Method To An Optimal Control Problem In Quantum Biology, Rashad Abdulla

Theses and Dissertations

Quantum biology is an emerging field which seeks to understand and analyze the effects of quantum mechanical phenomena on biological systems. One such phenomenon is the formation of radical pairs, compounds which exist in a quantum superposition of two states until they collapse into one or the other. The probability of the collapse into a preferred state can be calculated from the Schrödinger equation, and is in fact dependent on external magnetic fields. This project utilizes principles of mathematical optimal control and quantum biology to determine the precise sequence of magnetic field pulses that maximize the probability of achieving the …

Extreme Altitude Search And Rescue Helicopter, Matthew J. De Sieno, Anthony Chavarria, David Stuver, Zach Boss

Senior Design Project For Engineers

The goal of this design was to develop an extreme altitude rescue helicopter capable of retrieving hikers stranded on top of Mount Everest. Using the Eurocopter AS350 as a baseline, a conceptual model was produced that is fully capable of hovering and delivering forward flight at the desired altitude of 8,848 meters. Combined blade element momentum theory, proper airfoil selection, and forward flight calculations were utilized in order to optimize the rotor for the given flight conditions on top of Mount Everest. Conceptual fluid dynamics and CAD modeling aided in the process of visually designing the fuselage and rotor. Not …

Optimization Of The Retention Rates Of Ready Mix Usa Drivers, Pruthvi Hira, Jaime Harmon, Kenneth Correa, Destiny Sessums

Senior Design Project For Engineers

Ready Mix USA, a CEMEX company, is a giant in the building materials industry, servicing the Southeastern region of the United States through various commercial and residential projects. The Atlanta Division of RMUSA currently consists of 15 operational plants in the state of Georgia with its headquarters located in Woodstock. From the years 2015 to 2018, managers at Ready Mix USA noticed a drastic increase in turnover rates of ready mix truck drivers and did not have an answer for the increasing percentages. The Continuous Improvement at RMUSA tasked the student project team from the Industrial and Systems Engineering department …

Smart Flow Facility Analysis, Chantal Ann George, Pete Suktankar, Eric Wilson, Matthew Geiger

Senior Design Project For Engineers

The SMART Flow Design Team has been tasked in providing a physical layout for a single building facility used to consolidate three separate business units. The objective for the new facility will be to manufacture, receive, ship, and store the company's finished products. When designing the physical layout, the team must take into consideration stable and seasonal business volumes, current and future volume demand growth, designated inbound, outbound, and storage areas, and product turn rates. All specifications must be met while determining an efficient flow of goods. The team has designed indoor and outdoor layouts using Microsoft Visio, performed various …

90 Day Kit Assessment, Sarah Abdullah, Karim Daoudi, Jennifer Rutledge

Senior Design Project For Engineers

Field Service Products (FSPA) in Atlanta, GA provides Siemens Energy, Inc., with tool sets and systems used to work on Power Generation Equipment. When the FSPA receives the tool systems back from the customer, there is a window of 90 days in which the FSPA must verify that the tool systems were returned complete and operational. If the verification process happens within the 90-day window and something is missing from the system, the FSPA can bill the customer for the missing or damaged items. If the tool system is verified outside of the 90-day window, the FSPA must replace any …

Foster Care Support Foundation Volunteer And Capital Outreach Analysis, Abeer Bhatti, Alexandro Martinez, Sunny Patel, Desmond Vail

Senior Design Project For Engineers

Care Support Foundation (FCSF) provides free goods to children in Georgia. Annually, 11,000 volunteers are needed to deal with the massive influx of donations and fundraising events. Through our analyses, we aim to make recommendations to the FCSF, which can help raise funds and implement mitigating strategies that would increase funds and improve the foundation.

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

The Self-Sufficient Ticketing Response System For The Rajant Support Network, Maria E. Lemaster

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Maria E. Lemaster on April 26, 2019.

Equilibrium-Based Workload Balancing For Robust Emergency Response Operations In Metropolitan Areas, Parya Roustaee

Civil and Environmental Engineering Theses and Dissertations

This thesis presents an equilibrium-based modeling framework for emergency response (ER) workload balancing to achieve robust operation in large-scale metropolitan areas. The problem is formulated as a non-linear mathematical program (NLP), which determines the optimal workload cutoff for each ER station such that the weighted sum of the area-wide expected response time and its variation are minimized. The concept of Marginal Cost of Uncertainty (MCU) is introduced to measure the impact of a station’s workload increase on the area-wide service performance. The solution of the NLP is proved to be equivalent to a state of equilibrium in which all stations …

An Engineered Approach To Site Selection: Determining Where Facilities Should Be Located, Kerry Melton

Operations Management Presentations

The importance of facility location has dramatically increased over the last several years as the U.S. economy has expanded and different metropolitan areas and markets have experienced population growth, infrastructure changes, labor availability improvements, and better technologies. Global competition has also created the need to further drive down costs and strategize the location of facilities such as distribution centers, freight consolidation centers, retail stores, manufacturing plants, supplier locations for raw materials, farms to grow crops, port facilities, etc. Due to the importance of facility location, this presentation will consider and evaluate several traditional and more modern methods for determining the …

An Aco-Inspired, Probabilistic, Greedy Approach To The Drone Traveling Salesman Problem, Jessica Houseknecht

Senior Honors Theses

In recent years, major companies have done research on using drones for parcel delivery. Research has shown that this can result in significant savings, which has led to the formulation of various truck and drone routing and scheduling optimization problems. This paper explains and analyzes a new approach to the Drone Traveling Salesman Problem (DTSP) based on ant colony optimization (ACO).

The ACO-based approach has an acceptance policy that maximizes the usage of the drone. The results reveal that the pheromone causes the algorithm to converge quickly to the best solution. The algorithm performs comparably to the MIP model, CP …

Development Of A Scada System For Alternative Energy, Molom-Ochir Mijid

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirement for the Degree Master of Science by Molom-Ochir Mijid on April 18, 2019.

Multi-Chromosome Genetic Algorithm For Multiple Traveling Salesman Problem, Duofu Ye, Liu Gang, He Bing

Journal of System Simulation

Abstract: A multi-traveling salesman model with time window is established, and two objective functions for the number of traveling salesmen and the sum of travel time are designed. A multi - chromosome coding method is designed to develop complex mutation operator tree, which overcomes the problem of large searching space of traditional genetic algorithms. The performances of algorithms are compared by simulation, and the simulation results show that the genetic algorithm with complex multi-chromosome mutation tree can balance the two objective functions of the number of TSP and total travel time well, improve the algorithm of travel speed, and reduce …

Virtual Scene Simulation Of Pilot Response In Taking-Off And Landing Processes Of Carrier-Based Aircraft, Ke Peng, Chenglin Xu, Songyang Liu, Minggao Li, Zhao Xin

Journal of System Simulation

Abstract: A research and implementation method based on biomechanics simulation and virtual scene simulation was put forward to investigate the dynamics responses of pilots during the taking off and landing processes of carrier-based aircraft. The human biomechanics calculation of pilots and 3D virtual scene simulation of flight scene were combined to design and develop the integrated virtual simulation platform. This platform has the functions of data management and analysis, human biological dynamics calculation, synchronous analysis of key results, 3D virtual scene simulation of taking-off and landing processes and human response. The verification was carried out using the experiments from …

Modeling And Timing Simulation Of Turbojet Engine Starting Process, Wang Lei, Liying Yang, Hongda Zhang, Yuqing He

Journal of System Simulation

Abstract: The turbojet engine is complicated in its starting process and requires collaboration and cooperation involving all the execution structures, thus higher demand is put forward for the control system. How to model the engine starting process, and then accurately describe and analyze the impact of actuator states on engine performance directly affect the engine control system performance. According to the working principle of the JetCat-P400 German turbojet starting process, the rotor speed mathematical model of the turbojet engine starting process is constructed by the component method. The parameters of the model are identified by combining the experimental data of …

Evaluation Of Green Smart Cities In China Based On Entropy Weight - Cloud Model, Chen Li, Haixia Zhang

Journal of System Simulation

Abstract: Based on the research on green smart city at home and abroad; and aiming at the shortcomings and deficiencies of traditional evaluation methods, this paper proposes an evaluation method of combining entropy and cloud model based on the cloud model which can realize the conversion of qualitative concept and quantitative value. This method synthetically considers the subjective and objective factors; carries on the correlation analysis to the index; determines the set of evaluation indicators; uses the X-conditional cloud generator in cloud model to obtain the different levels of membership matrix corresponding to each evaluation object; and carries on the …

Improving Efficiency Of Manufacturing Cells, Conner Deneen

Honors Theses

Mann + Hummel is a tier one automotive supplier located in Portage, Michigan. The industry sponsor for this project is Director of Operations, Dan Kempisty with his supporting team, and the academic advisor for this project is Industrial Engineering Professor, Dana Hammond. The following report focuses on improving the efficiency of Cell 301 A and Cell 301 B which manufactures the air intake manifold for the Toyota Camry and Highlander. Topics analyzed in attempts to improve efficiencies include the following; standard operating procedures, line balancing, improving quality, reducing scrap, and analyzing non-value-added tasks. Time studies were conducted on each operator …