Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery,
2025
Andijan State University named after Zahiriddin Muhammad Babur, Andijan, Uzbekistan E-mail: [email protected].
Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev
Chemical Technology, Control and Management
This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …
Research And Development Of Intelligent Measurement Systems,
2025
Navoi State University of Mining and Technology. Addres: 210100, Navoi region, Navoi, Street Galaba, 27.
Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich
Chemical Technology, Control and Management
The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.
Synthesis Of A Control System For Thermal Energy Facilities Using The Quantum Photon Spin Method,
2025
Tashkent State Technical University, Address: 2 Universitetskaya st., 100095, Tashkent city, Republic of Uzbekistan.
Synthesis Of A Control System For Thermal Energy Facilities Using The Quantum Photon Spin Method, Isomiddin Siddikov, N.S Yakubova
Chemical Technology, Control and Management
Increasing energy efficiency and reducing fuel consumption in the process of generating electricity and heat at thermal power plants is one of the urgent tasks. Such systems operate under conditions of random changes in external and internal influences, as well as measurement uncertainties, which reduce the quality of control. In order to overcome this problem, it was proposed to develop an intelligent control system using the quantum photon-spin method to control technological units of thermal power plants. In the proposed approach, a multi-dimensional heating boiler device was taken as a control object, and the simulation modeling of the control system …
Data Compression In Additive Manufacturing: Recent Progress And Opportunities,
2025
Mississippi State University
Data Compression In Additive Manufacturing: Recent Progress And Opportunities, Dongmin Ethan Kang, Wenmeng Tian
Publications
A crucial aspect of quality control for Additive Manufacturing (AM) processes is the acquisition of diverse data from the entire lifecycle of the product. AM data has grown significantly in terms of diversity and volumes, resulting in diverse data formats of increasing volumes, including time series, images, and point clouds. Large quantities of these data are essential for effective in-situ process monitoring and ex-situ non-destructive evaluation. However, this will result in large manufacturing and inspection datasets that are difficult to manage for users, which will delay the broader adoption of AM for mission critical applications. This motivates the urgent need …
Ibi-Dt: A Novel Approach Combining Individualized Bayesian Inference And Decision Tree For Identifying Cancer Drivers And Their Interactions,
2025
Missouri University of Science and Technology
Ibi-Dt: A Novel Approach Combining Individualized Bayesian Inference And Decision Tree For Identifying Cancer Drivers And Their Interactions, Md Asad Rahman, Gregory F. Cooper, Jinying Zhao, Xinghua Lu, Jinling Liu
Engineering Management and Systems Engineering Faculty Research & Creative Works
Cancer is mainly caused by a relatively small portion of somatic genome alterations (SGAs), called cancer drivers. Despite success in identifying a good number of cancer drivers, many more remain to be discovered to explain various cancers. Moreover, limited tools are available to identify potential interactions among cancer drivers for a better understanding of oncogenesis. To tackle these challenges, we have developed a novel approach called individualized Bayesian inference using a decision tree (IBI-DT). IBI-DT recognizes the genetic heterogeneity among cancer patients, where different individuals or patient subgroups of distinct genomic makeup may have different drivers. IBI-DT works by constructing …
Implementing Lean Principles To Enhance Warehouse Operations At King Abdulaziz Air Base(Kaab): A Case Study Of Royal Saudi Air Force (Rsaf),
2025
Air Force Institute of Technology
Implementing Lean Principles To Enhance Warehouse Operations At King Abdulaziz Air Base(Kaab): A Case Study Of Royal Saudi Air Force (Rsaf), Saleh A. Alghamdi
Theses and Dissertations
The Royal Saudi Air Force (RSAF) relies on efficient logistics to sustain readiness. At King Abdulaziz Air Base, warehouse receiving inefficiencies caused delays and waste. This study used Lean principles and a six-month time–motion analysis, with Pareto and Fishbone tools, to identify 55% waste in dead pile and 75% in palletized shipments. Standard times of 5.98 and 6.55 minutes were set. Key recommendations include SOPs, cross-training, forklift certification, layout redesign, and RFID. Lean adoption could save 100+ labor hours and $4,000 annually, improving safety, accuracy, and mission readiness.
Understanding The Relationship Between Structural Failure And Fatalities In Tornadoes: A Quantitative Investigation Of The 2021 Midwest Tornado Outbreak,
2025
Missouri University of Science and Technology
Understanding The Relationship Between Structural Failure And Fatalities In Tornadoes: A Quantitative Investigation Of The 2021 Midwest Tornado Outbreak, Yi Zhao, Ruwen Qin, John W. Van De Lindt, Justin Sharpe, Grace Yan
Engineering Management and Systems Engineering Faculty Research & Creative Works
During 1950-2011, the number of fatalities caused by tornadoes in the U.S. significantly exceeded the fatalities caused by both hurricanes and earthquakes. To reduce tornado induced fatalities, it is essential to understand how structures/building failures correlate with fatalities and who are more vulnerable to tornadoes. Insights from this study are intended to help provide information to decision-makers on where to allocate limited resources for enhancing tornado resilience. By examining both the fatality data and structural damage data in the 2021 Midwest Tornado Outbreak, the objective of this study is to examine the occurrence of fatalities during tornadoes across various types …
Automation Of Lcmc Logistics Processes: A Delphi Approach,
2025
Air Force Institute of Technology
Automation Of Lcmc Logistics Processes: A Delphi Approach, Kline M. Alt
Theses and Dissertations
As the U.S. Air Force confronts growing complexity in system acquisition, the implementation of digital models in system design and logistics process management allows the incorporation of digital tools and the possibility for automation of portions of logistics processes. This thesis investigates where these technologies can be most effectively integrated within the Air Force Life Cycle Management Center logistics enterprise (AFLCMC). Using a three round Delphi study, AFLCMC logistics subject matter expert (SME) opinions were solicited from program-level senior logisticians, program managers to identify high-need areas, key success factors, and potential barriers to adoption. Quantitative consensus from Likert-scale and ordinal …
A Review Of The United States' Long Term War Support Capabilities In The Indo-Pacific Command Region,
2025
Air Force Institute of Technology
A Review Of The United States' Long Term War Support Capabilities In The Indo-Pacific Command Region, Brian J. Mullin Jr.
Theses and Dissertations
This study examines U.S. maritime transportation readiness in the Indo-Pacific, highlighting fleet age, mariner shortages, shipyard decline, and port vulnerabilities. It also considers contested logistics and technological threats. Recommendations include fleet recapitalization, mariner pipeline growth, port diversification, and defensive upgrades. The study concludes that secure sea line assumptions are outdated and calls for greater resilience, with follow-on efficiency analysis proposed for ports and ships.
Using Statistical Clustering Of Trajectory Data To Support Analysis Of Subject Movement In A Virtual Environment,
2025
The University of Texas Rio Grande Valley
Using Statistical Clustering Of Trajectory Data To Support Analysis Of Subject Movement In A Virtual Environment, Martin Galicia Avila, Douglas Timmer, Alley C. Butler
Manufacturing & Industrial Engineering Faculty Publications
Gracia de Luna conducted experiments with an HMD virtual environment in which human subjects were presented with surprise distractions. His collected data for head, dominant hand, and non-dominant hand included 6 DOF human subject trajectories. This paper examines this data from 57 human subject responses to those surprise virtual environment distractions using statistical trajectory clustering algorithms. The data is organized and processed with a Dynamic Time Warping (DTW) algorithm and then analyzed using the Density Based Spatial Clustering (DBSCAN) algorithm. The K-means method was used to determine the appropriate number of clusters. Chi Squared goodness of fit was used to …
A Technical And Statistical Analysis Of Unleaded Aviation Fuel (Ul94) Adoption In A High- Volume Collegiate Aviation Environment,
2025
University of North Dakota
A Technical And Statistical Analysis Of Unleaded Aviation Fuel (Ul94) Adoption In A High- Volume Collegiate Aviation Environment, Nicholas D. Wilson, Ryan Guthridge, Brandon Wild, Jeremy Roesler, Daniel Kasowski, Nick Geinert, Aaron Terbest, Aaron Fettig, Robert Kraus
Journal of Aviation Technology and Engineering
The University of North Dakota (UND) adopted unleaded aviation fuel (UL94) for approximately a four-month period in the summer and early fall of 2023. The UL94 fuel was used in all reciprocating engine fleets based at the university’s primary training airport, Grand Forks International Airport in North Dakota. During the operational implementation of UL94, the UND flew 46,600 flight hours, consuming 386,778 gallons of fuel across all fleets powered by Lycoming engines. After approximately two months of using UL94, operational reports and maintenance inspections began to indicate potential for exhaust valve seat recession (EVSR), although early indications were limited in …
Köppen-Geiger Climate Effects On F-15 Readiness Spares Package Parts,
2025
Air Force Institute of Technology
Köppen-Geiger Climate Effects On F-15 Readiness Spares Package Parts, Maximus A. Fan
Theses and Dissertations
Readiness Spares Packages (RSP) are critical to deployed operations. Future demands of the Air Force require squadrons to operate in different climate environments from home stations. RSPs can sustain aircraft maintenance operations for up to 30 days. Currently, failure rates of parts within the RSP are assumed to be constant. This research aims to explore whether there is a difference in F-15 RSP failure rates when Koeppen climate classifications are taken into effect. The Koeppen-Geiger system classifies area climates based on the geography, elevation, and location. The history of operations and diversity of F-15 locations make the aircraft an ideal …
Detection Of Small Apple Targets Based On Improved Yolov5 In Natural Environments,
2025
School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
Detection Of Small Apple Targets Based On Improved Yolov5 In Natural Environments, Zilong Liu, Lei Zhang
Journal of System Simulation
Abstract: The distribution of apples usually features occlusion and small and dense targets. To address these issues, a target detection algorithm was proposed based on an improved YOLOv5 model. Specifically, this paper added the coordinate attention (CA) mechanism, receptive field block (RFB), and adaptively spatial feature fusion (ASFF) modules to the YOLOv5, enhancing the ability to detect small targets. Additionally, the proposed algorithm replaced the CIoU in YOLOv5 with SIoU to improve the target detection box's prediction accuracy. Finally, some normal convolutions were replaced with depthwise separable convolutions (DSC), effectively reducing the calculation burden. Experiment results show that the comprehensive …
Scene Generation Method For Maritime Target Recognition Based On Detection Parameters,
2025
National Key Laboratory of Reliability and Environmental Engineering, Beijing 100191, China; School of Reliability and Systems Engineering,
Beihang University, Beijing 100191, China
Scene Generation Method For Maritime Target Recognition Based On Detection Parameters, Yuxuan Run, Dezhen Yang, Yeyang Liu, Wei Deng, Xiangyu Xing, Yi Ren
Journal of System Simulation
Abstract: Traditional scene generation methods for maritime target recognition consider only the effects of different environments on the generated scene data, while overlooking the changes in scene information caused by sensor detection parameters, resulting in a lack of accuracy and authenticity in generated scenes. To address this issue, a detection parameter-based scene generation method for maritime target recognition was proposed. For the task of maritime target recognition, key detection parameters affecting scene generation quality and essential scene features were analyzed. An association relationship modeling method based on Bayesian networks was proposed to construct a mapping relationship model between scene features …
Ship Fire Prediction Method Based On Evidence Theory With Fuzzy Reward,
2025
Navigation College, Dalian Maritime University, Dalian 116026, China
Ship Fire Prediction Method Based On Evidence Theory With Fuzzy Reward, Chunyu Yang, Chuang Zhang, Xiaofan Zhang
Journal of System Simulation
Abstract: A multi-source information fusion approach based on the dempster-shafer (D-S) evidence theory with a fuzzy reward-penalty mechanism was proposed to address the issues of underreporting and false reporting in the early prediction of ship fires. PyroSim was utilized to construct a ship's laboratory model for fire simulation. Variations in carbon monoxide, temperature, and smoke concentration were recorded for data acquisition, followed by the application of a sigmf function for membership assignment. By leveraging the classical D-S theory, a reward-penalty mechanism was applied in weighted evidence fusion. Reward-penalty factors were utilized to differentiate various basic probability assignments, with unified belief …
Research On Joint Simulation Of Special Vehicle Engine Operation Characteristics Based On Virtual Driving Scenarios,
2025
School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100080, China
Research On Joint Simulation Of Special Vehicle Engine Operation Characteristics Based On Virtual Driving Scenarios, Xueyuan Xie, Chen Lin, Han Wu, Qinglan Zhao, Junfei Gao, Qiangguo Hao, Xinqian Zheng
Journal of System Simulation
Abstract: The preliminary design of the overall operation performance of diesel engines cannot be guided by actual vehicle driving tests, which hinders the improvement of the power development level and efficiency of special vehicles. By using the virtual visual simulation engine Unity3D, two virtual driving scenario models were established: a flat road scenario and an undulating road scenario. Based on the speed characteristic parameters of the engine, a diesel engine's operation performance output model was constructed. Combined with the transmission system model and the longitudinal dynamics model of the vehicle's center of mass, a straight vehicle driving dynamics model was …
Simulation And Optimization Of Support Processes For Aircraft Fleet Launch Under Limited Resources,
2025
University of Electronic Science and Technology of China, Chengdu 611731, China; AVIC Chengdu Aircraft Design & Research Institute, Chengdu 610031, China
Simulation And Optimization Of Support Processes For Aircraft Fleet Launch Under Limited Resources, Feng Gong, Tao Jiang, Qin Zhang, Yu Liu
Journal of System Simulation
Abstract: To address the scheduling problem of aircraft fleet support processes under limited resources, a fleet support process optimization model that covered multiple aircraft, activities, and resource constraints was developed. An activity node graph model was used to establish the temporal logic, resource competition, and other constraints in the fleet support process, forming a "time – activity – resource" multidimensional optimization model. A genetic algorithm based on priority encoding was proposed, incorporating a serial decoding strategy and a dynamic penalty function to handle the complex constraints in the model, efficiently solving the optimization problem under complicated temporal and resource constraints. …
Short-Term Load Forecasting Based On Dual-Attention Temporal Convolutional Long Short-Term Memory Network,
2025
Department of Computer, North China Electric Power University, Baoding 071000, China; 2. Department of Electronic & Communication Engineering, North China Electric Power University, Baoding 071000, China; Hebei Key Laboratory of Knowledge Computing for Energy & Power, Baoding 071000, China
Short-Term Load Forecasting Based On Dual-Attention Temporal Convolutional Long Short-Term Memory Network, Lifen Li, Jinyue Zhang, Wangbin Cao, Huawei Mei
Journal of System Simulation
Abstract: In order to improve the accuracy of load forecasting and fully extract the hidden relationships between load and other characteristic factors, a load forecasting method based on dual-attention temporal convolutional LSTM network (DA-TCLSNet) was proposed. Correlation analysis was conducted on the dataset using the maximum information coefficient method to perform feature screening to reduce the computational cost of the model. The model input was constructed using a sliding window. The DATCLSNet forecasting model was constructed. The temporal convolutional layer extracted dependencies at different time scales and captured the nonlinear characteristics among variables such as load and weather. The multi-head …
Research On 3d Visualization Of Safety Monitoring And Early Warning For Steel Continuous Casting Scenarios,
2025
School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Research On 3d Visualization Of Safety Monitoring And Early Warning For Steel Continuous Casting Scenarios, Wei Zhang, Wei Sheng, Yidan Cao, Tingsheng Zhao
Journal of System Simulation
Abstract: In order to improve the visualization and integration of production safety monitoring and fault warning, a three-dimensional (3D) visualization model architecture for whole-process industrial production safety monitoring and early warning for steel continuous casting scenarios was designed. By using 3ds Max and Unity3D, a multi-dimensional and multi-scale model was built, and functional modules such as visualization display and multi-level early warning for safety monitoring data were developed. By combining WebGL technology and Node. js runtime environment, the visualization of whole-process industrial production safety monitoring based on Web terminal was realized. The alarm threshold determination method for whole-process industrial production …
Optimal Scheduling Of An Integrated Energy System Considering Demand Response And Two-Stage P2g,
2025
Department of Automation, North China Electric Power University, Baoding 071003, China; Baoding Sinosimu Technology Co. , Ltd. , Baoding 071051, China
Optimal Scheduling Of An Integrated Energy System Considering Demand Response And Two-Stage P2g, Xinhui Duan, Zelong Cheng, Dongchao Zhang, Xiaochong Duan
Journal of System Simulation
Abstract: In the context of carbon peaking and carbon neutrality goals, this study aims to improve the energy utilization rate and further explore the role of user-side flexible loads and P2G equipment in energy saving and emission reduction. An optimal scheduling model for integrated energy systems considering demand response and two-stage P2G was proposed. A regional integrated energy system coupled with electricity, heating, cooling, gas, storage, and hydrogen was taken as the research object. Models for system equipment and two-stage P2G were established. Based on load characteristics, a multi-load demand response model for electricity, heating, and cooling was constructed using …
