Operations Research, Systems Engineering and Industrial Engineering Commons^™

Robust Emergency Dispatch Method Considering Dynamic Frequency Security And N-K Contingency, Tao Huang, Zhi Zhang, Yujie Ding, Yanbo Chen, Jing Wang, Wenqian Zhang

Journal of System Simulation

Abstract: To address the risk of system inertia loss and frequency instability caused by grid integration of high-proportioned new energy and unit failures, an N-k robust emergency dispatch method considering dynamic frequency security constraints was proposed. With the consideration of the frequency response characteristics of variable-speed pumped storage, a dynamic frequency response model incorporating variable-speed pumped storage was constructed, and the nadir frequency constraint was established through second-order cone transformation. Information entropy theory was employed to quantify the uncertainty of unit failures, and an uncertainty set considering N-k unit failures was developed. A twostage robust emergency dispatch model considering N-k …

Vibration Control Of Offshore Wind Turbine Towers Based On Eddy Current Nonlinear Energy Sink, Xiangxing Yu, Yandong Zhao, Baolin Zhang

Journal of System Simulation

Abstract: To address the issue of tower vibrations induced by wind loads, which can damage the structure of wind turbines, a vibration control method for monopile offshore wind turbine towers based on an eddy current-nonlinear energy sink (EC-NES) was proposed. The dynamic model of monopile offshore wind turbines based on EC-NES was constructed according to the Euler-Lagrange equation, and based on the output response of FAST software, the unknown parameters of the model and the wind loads were identified in terms of parameters. The optimal parameters of EC-NES stiffness and damping were obtained using PSO. The eddy current damper …

Fault Diagnosis Method For Photovoltaic Systems Based On Multi-Strategy Fusion, Bin Li, Yuchuo Wang

Journal of System Simulation

Abstract: To address the problem of frequent PV system faults, a multimodal fusion fault diagnosis model based on the optimization of the improved lemming algorithm was proposed. The one-dimensional time series signals of PV currents and voltages were converted into two-dimensional images by Markov transformation field, and the spatial features of the original waveforms were mined by using multiscale CNN (MCCNN); BiGRU was used to extract the temporal dynamic features of the original waveforms, and complementary enhancement of the temporal and spatial features was realized by the feature fusion layer. The improved lemming algorithm was innovatively introduced to adaptively optimize …

Numerical Simulations Of Ship Liquid Tank Sloshing Based On Graph Neural Networks, Wenkang Zhang, Xiaofeng Sun, Yiping Zhong, Yong Yin

Journal of System Simulation

Abstract: To address the high consumption of computational resources in simulating ship liquid tank sloshing using computational fluid dynamics simulation methods, a data-driven numerical simulation model was proposed based on graph neural networks. An encoder-processor-decoder framework was employed in the proposed model. The encoder extracted features of fluid particles from the first five time steps. The processor learnt latent motion patterns of fluid and updated features, and the decoder predicted features of particles at subsequent time steps. The processor incorporated a self-attention mechanism to enable dynamic adjacency weight allocation and emphasize the influence of irregular tank wall regions. Training …

Lightweight Assembly Workpiece Detection Algorithm Based On Improved Yolov8, Shuheng Wu, Yongkui Liu, Lin Zhang, Yingying Xiao, Lihui Wang

Journal of System Simulation

Abstract: To address the issues of low recognition accuracy and slow detection speed with existing deep learning-based object detection algorithms for robotic automatic assembly tasks, a lightweight assembly workpiece object detection algorithm based on YOLOv8 was proposed. The PConv was introduced to improve the C2f module, and a new Faster_C2f module was designed to enhance the detection speed of the model. The SIoU loss function was employed to optimize the location prediction accuracy of the CIoU loss function and improve the localization accuracy of small targets. The high-level screening-feature fusion pyramid networks (HS-FPN) structure was used to improve the Neck …

Vibrissae-Inspired Vision-Based Magnetic-Actuated Whisker, Zhixian Hu, Yi Cheng, Juan P. Wachs, Yu She

School of Industrial Engineering Faculty Publications

Tactile perception is significant for robotic operation in unstructured environments. Whisker-based sensors offer lightweight bio-inspired solutions, yet most rely on single-whisker sensing and are limited by passive interaction and constrained functionality. Here we present a circular array of eight independently actuated whiskers, each driven by a pulse-switchable permanent magnet and tracked by a camera. This design enables simultaneous multi-point sensing and coordinated actuation, supporting diverse functions. Quantitative analyses demonstrate accurate pixel-to-physical mapping, consistent pixel-to-force characterization, and long-term repeatability. In this work, we show that an vibrissae-inspired vision-based magnetic-actuated whisker array integrating distributed perception with active interaction achieves reliable physical mapping, …

From Test Tracks To Carbon Tracks: Evaluating The Carbon Emissions Of Autonomous Vehicle Development, Sarah Deniz

The Journal of Purdue Undergraduate Research

Autonomous vehicle (AV) development has seen a sharp increase in the past 10 years, and there is a significant energy cost of training AVs to meet safety regulations. The training process includes virtual simulation training as well as physical training on public roads and within private testing facilities. The high energy expenditure associated with AV training has a respective environmental cost that can be quantified as a lifetime “carbon debt” of released carbon emissions. The environmental sustainability of AVs has not been thoroughly studied in currently available literature, and this paper showcases a model that quantifies the total “carbon debt” …

Fasttree-Guided Genetic Algorithm For Credit Scoring Feature Selection, Rashed Bahlool, Nabil Hewahi Prof., Youssef Harrath Dr.

Research & Publications

Feature selection is pivotal in enhancing the efficiency of credit scoring predictions, where misclassifications are critical because they can result in financial losses for lenders and exclusion of eligible borrowers. While traditional feature selection methods can improve accuracy and class separation, they often struggle to maintain consistent performance aligned with institutional preferences across datasets of varying size and imbalance. This study introduces a FastTree-Guided Genetic Algorithm (FT-GA) that combines gradient-boosted learning with evolutionary optimization to prioritize class separability and minimize falserisk exposure. In contrast to traditional approaches, FT-GA provides fine-grained search guidance by acknowledging that false positives and false negatives …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Lecun-Pso Hybrid Initialization Of Neural Network Using Asymmetric Gait Features For Classification Of Parkinson’S Disease, Michael Joseph Carter

Theses and Dissertations

Parkinson's disease (PD) is a complex condition with a wide range of clinical symptoms. It is a progressive neurological disorder that has afflicted an estimated 1 million people in the US and 10 million worldwide. The diagnosis of PD is typically based on the presence of clinical features, with no specific diagnostic test or biomarker. The methods of assessment for PD are also used, in whole or in part, for similar symptom diseases such as Multiple Sclerosis, Essential Tremors, Multiple System Atrophy, Supranuclear Palsy, Dementia with Lewy bodies and Huntington’s disease. Many of the current clinical tests have low sensitivity …

Exploring The Impact Of Incorporating Artificial Intelligence Integrated Systems In The Workplace, Catherine Cruz Agosto Noda

Theses and Dissertations

This study focuses on assessing the impact of incorporating systems integrated with in the workplace by assessing the constructs of usability, cognitive load, and trust. The constructs are assessed by generation and experience level to determine which factors are relevant in a workplace setting. A workplace scenario was simulated by asking participants to complete tasks where they assumed the role of a warehouse manager assigned with assessing two scheduling systems – one with artificial intelligence and one without artificial intelligence. The participants were presented with three tasks of increasing difficulty for each prototype. Both quantitative and qualitative measures were used …

Optimizing Military Fighter Jet Selection: A Decision Analysis Approach For Nuclear-Capable Aircraft, Eni Kelechi Ofong

Theses and Dissertations

This research investigates the strategic decision-making process involved in selecting a nuclear-capable fighter aircraft for NATO (North Atlantic Treaty Organization) nations in Europe. In adaptation to the continuously changing technology landscape and the necessity for enhanced deterrence capabilities, this study evaluates three potential aircraft: the legacy Panavia Tornado (PA-200), the widely deployed F-16 Fighting Falcon (F-16), and the advanced F-35 Lightning II (F-35). Each platform presents distinct advantages and limitations regarding operational performance, mission adaptability, cost-effectiveness, and long-term sustainability. To systematically assess these alternatives, the study employs various decision analysis frameworks, including Multi-Criteria Decision Analysis (MCDA), single dimensional value function …

Warehouse Reconfiguration With Ats Lab, Ed Cantor, Dana Pazhouhesh, Mathew Oshinski, Samantha Sanchez

Senior Design Project For Engineers

The ATS Lab Warehouse Reconfiguration project is a collaborative effort between Kennesaw State University’s Department of Industrial and Systems Engineering and ATS Lab, located in Marietta, GA. The goal of this project is to redesign the current warehouse layout to enhance operational efficiency, reduce travel time, and implement sustainable inventory management practices, including 5S and Kanban. Aaron Roob, ATS Operations Manager, and Franklin Hungerford, Continuous Improvement Manager, led this initiative. Our team, “Sick Sigma’s,” is composed of Ed Cantor, our Project Manager, who is working as an intern at ATS during this process; Dana Pazhouhesh (Process Engineer); Matthew Oshinski (Quality …

Workstation Redesign, Mclean Dowell, Anna Seville, Luz Corral Parra, Farah Talib

Senior Design Project For Engineers

Tellerex is a leading ATM refurbishing and repair company operating from Atlanta, Georgia. Due to its rapid growth, the company is facing challenges pertaining to their parts repair and refurbishing lab. Tellerex aims to fulfill orders by 4:00 pm on the day they are placed, guaranteeing their clients same-day shipping. Orders often build up throughout the day, causing lab technicians to stress, rush through orders, and lose organization.

Tellerex has requested our help regarding one of their repair/refurbishment labs. Our goal is to redesign the lab workspace through human ergonomics and Lean Six-Sigma principles. The company wants us to create …

Philosophy Of Culinary Arts: Reading Truth Through Language And Taste, Devi Dwi Purwanto, Aji Prasetya Wibawa, Syaad Patmanthara

Bulletin of Culinary Art and Hospitality

The development of Natural Language Processing (NLP) technology has transformed the way we analyze and understand culinary arts through a digital approach. NLP enables the transformation of empirical and sensory culinary knowledge into structured data that can be analyzed computationally. This technology opens up opportunities to explore the relationships between ingredients, techniques, and flavors in culinary arts, as well as to represent culinary reality in a more organized form. This study aims to identify how NLP can represent the relationships between ingredients, techniques, and flavors in culinary arts and their impact on the structure of culinary knowledge from an epistemological, …

Optimizing Xo Throughput At Imerys, Derek Beasley, Brennan Chandler, Baris Erarslan, Cynthia Grogin

Senior Design Project For Engineers

This project is conducted in collaboration with Imerys to optimize the performance of the VSI (Vertical Shaft Impactor) system at their Plant 4 facility, focusing on improving the production of XO, a fine material used in products such as textured coatings, acid neutralization, and water filtration systems. The VSI operates continuously, producing several materials at the Marble Hill, Georgia location, including #1 Chip, #2 Chip, OZ, XO, Z, and 30–50. The main focus of this project is to increase the throughput of XO, as it requires both throughput improvement and product quality consistency to meet growing market demand. Imerys’ quality …

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …