Weighted Online Estimation Of Soc Based On Adaptive Battery Model,
2020
Engineering Research Center of Internet of Things Technology Applications Ministry of Education, Jiangnan University, Wuxi 214122, China;
Weighted Online Estimation Of Soc Based On Adaptive Battery Model, Haohao Sun, Tinglong Pan, Dinghui Wu
Journal of System Simulation
Abstract: Aiming at the problem that the traditional lithium battery model has poor adaptive ability in SOC estimation and the local estimation accuracy of the single SOC estimation algorithm is low, online identification of model parameters with Multi-Innovation Stochastic Gradient algorithm and method of weighted online estimation of SOC was proposed. The results of lithium-ion battery model parameters online identification updated in real time, realizing lithium-ion battery model adaptive. Aiming at the estimation of SOC, a method of weighted online estimation method based on the PI (proportion and integral) regulator's OCV combined with Ah (an integral method) was proposed. Weights …
Multi-Variable Modeling Research For Main-Steam Temperature Of Power Station Boiler Based On Improved Differential Evolution Algorithm,
2020
1. College of Electronics and Information Engineering, Tongji University, Shanghai 201804, China;;2. College of Automation Engineering, Shanghai University of Electric Power Shanghai Key Laboratory of Power Station Automation Technology, Shanghai 200090, China;;
Multi-Variable Modeling Research For Main-Steam Temperature Of Power Station Boiler Based On Improved Differential Evolution Algorithm, Li Qin, Zhang Hao, Daogang Peng, Yibo Guo, Nianlong Wang, Yuzhen Sun
Journal of System Simulation
Abstract: By analyzing the factors which affected the main-steam temperature, a multi-variable model was introduced to overcome the bad result of single variable cascade control. An improved differential evolution algorithm was proposed including mutation strategies random selection, crossover ratio and mutation ratio adaptive adjustment, which was used for closed-loop identification of main-steam multi-variable transfer function model. The principle and method how to obtain valid identification data from power plant distributed control system history database was introduced, and the data from some 1 000 MW coal-fired power plant was used to identify and verify the main-steam temperature multi-variable model, …
Research On Wavelength Routing Algorithm Based On Multi-Service In Satellite Optical Networks,
2020
1. Communication and Network Laboratory (Dalian University), Dalian 116622, China;;2. School of Information Engineering, Dalian University, Dalian 116622, China;
Research On Wavelength Routing Algorithm Based On Multi-Service In Satellite Optical Networks, Qingli Liu, Junfei Yao, Zhiguo Liu
Journal of System Simulation
Abstract: An optical wavelength routing algorithm for satellite networks based on multi-service was proposed, in order to solve the problem of low utilization rate of wavelengths, slow convergence and low efficiency of satellite optical networks. In this algorithm, it divided the area of the satellite network and updated the link in the area to improve the convergence speed of algorithm. Different services were assigned different wavelength sets to satisfy requirement of different service. According to the initial link weight, which included wavelength remain number and transmission delay, it changed link weight dynamically to achieve network load balancing and rational use …
Performance Analysis On Multiuser Untrusted Amplify-And-Forward Relay Networks,
2020
1. Guangzhou Panyu Polytechnic, Guangzhou 511483, China;;
Performance Analysis On Multiuser Untrusted Amplify-And-Forward Relay Networks, Deng Dan, Zhou Wen
Journal of System Simulation
Abstract: The effect of the untrusted relaying node was investigated on the secrecy outage probability (SOP) of amplify-and-forward (AF) relay networks in the presence of direct links and multiple users. In the considered system, the best user was selected according a certain criterion. It transmitted signals to the destination node with the aid of the untrusted relaying node. To reduce the useful information leakage, three selection criteria were proposed based on the channel state information of the direct and/or relaying link. The closed-form analytical SOP and the corresponding asymptotic expressions were derived. Computer simulation was conducted to validate the theoretical …
Modeling And Simulation Of Mooring Force Prediction Based On Improved Ga-Bp Network,
2020
1. Mechanical Engineering Inst, Dalian Jiaotong University, Dalian 116028, China;;
Modeling And Simulation Of Mooring Force Prediction Based On Improved Ga-Bp Network, Shifeng Li, Zhanzhi Qiu
Journal of System Simulation
Abstract: According to the mooring security and early warning control requirement of the large open sea terminal, a ship mooring force prediction model based on genetic algorithm and BP network was studied. Environmental dynamic factors were considered and a model structure was determined by a weight statistics method; the learning method was improved by individual parent information and contemporary individual local gradient information; according to the improved model, a ship mooring force prediction method of the open sea terminal was proposed. The simulation results show that the performance of the prediction model has improved in the iteration number, …
Intensity Analysis And Fatigue Life Simulation For Connecting Bolt Of Shearer Machine Body,
2020
1. Mechanical Engineering College of Liaoning Technical University, Fuxin 123000, China;;
Intensity Analysis And Fatigue Life Simulation For Connecting Bolt Of Shearer Machine Body, Zhiyong Hao, Yaolong Lei, Mao Jun, Yuan Zhi
Journal of System Simulation
Abstract: To obtain the cutting load spectrum of themachine body connecting bolt, the method of merging unknown quantities and multi calculation combined with the test experiments of shear mechanical properties was used to solve the overdetermined equations of shearer left haulage unit spatial mechanical model The cutting load spectrum of the machine body connecting bolt was taken to run PSD analysis, and the rainflow counting method was used to script the load spectrum. The frequency domain characteristics and time domain continuation characteristics were therefore obtained. The static analysis and fatigue life simulation analysis combined with the bolt load …
Application Of Weighted Dynamic Svdd In Nonlinear Process Monitoring,
2020
1. Department of Science Shenyang University of Chemical Technology, Shenyang 110142, China;;
Application Of Weighted Dynamic Svdd In Nonlinear Process Monitoring, Yanhong Xie, Chengao Sun, Li Yuan
Journal of System Simulation
Abstract: Due to the complexity of the chemical process, the data are often characterized by dynamics and correlation between sequences. Traditional support vector data description (SVDD) methods are difficult to guarantee real-time monitoring online. A Weighted-Dynamic-SVDD (WDSVDD) method was proposed to monitor fault in real time online. The dynamic method was introduced, and the correlation between the data was considered. The weighted information was used to highlight the useful information. The model was established by using SVDD method, and the online real-time fault monitoring was realized. The method not only overcomes the adverse effect of non-Gaussian and nonlinearity, but …
Research On One-Cycle Controlled Bi-Directional Dc-Dc Converter Based On Switch Capacitor Network,
2020
Institute of Electrical Automation, College of Internet of Things Engineering, Jiangnan University, Wuxi 214122, China;
Research On One-Cycle Controlled Bi-Directional Dc-Dc Converter Based On Switch Capacitor Network, Chen Lei, Tinglong Pan, Yanxia Shen, Dinghui Wu, Zhicheng Ji
Journal of System Simulation
Abstract: According to the switch capacitor network working characteristics of discharging in series, charging in parallel, a high ratio bidirectional DC-DC converter based on switch capacitor network was proposed. In order to improve the converter's ability of resist input voltage disturbance and dynamic response speed, an improved method was focused on which combined the advantage of one-cycle control and the output voltage feedback compensation control, which could realize inhibition the input voltage perturbation in one cycle and improve the converter's resistance ability of load disturbance. The operating principle and control characteristics of the new converter were analyzed. The improved one-cycle …
Simulation On Waste Heat And Water Recovery System Of Flue Gas In Plant Boiler,
2020
School of Energy Power and Mechanical Engineering, North China Electric Power University, Baoding 071003, China;
Simulation On Waste Heat And Water Recovery System Of Flue Gas In Plant Boiler, Jinping Wang, Deng Yu, Bin Li, Zhu Rui
Journal of System Simulation
Abstract: To further improve economy of power plant, the waste heat and water recovery system was put forward. The mathematical model of the gas cooler was established, and the simulation model of this system was built. This simulation model was integrated into the simulation system of a 350mw heating unit, and the simulation experiment was carried out. The influences caused by the introduction of the flue gas waste heat and water recovery system to thermal power unit were analyzed. The dynamic characteristics of the flue gas waste heat and water recovery system based on the valve perturbation experiments were …
Modeling And Simulation For Inter-Harmonics Of Double Pwm Ac Speed Control System For Port Bridge Crane,
2020
1. School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;;
Modeling And Simulation For Inter-Harmonics Of Double Pwm Ac Speed Control System For Port Bridge Crane, Wenhuan Yang, Dirui Yang, Ronggao Li
Journal of System Simulation
Abstract: When the total capacity of double PWM reversible speed control system in distribution network accounts for a larger proportion of power grid capacity, the power quality pollution, or even voltage flicker is generated by interharmonics of double PWM system. Therefore the stable operation of the power grid is affected. Based on the studies on bridge crane system in Shanghai Deep water Port area, a mathematical model of multi-quadrant double PWM reversible speed control system was established. In accordance with the operating characteristics of motor, the inter-harmonic currents, injected into grid were simulated at different speeds respectively in the power …
Rapid Manufacturing Of Critical Industrial Parts: A Method Based On Reverse Engineering, Rapid Prototyping, And Coordinate Metrology,
2020
The University of Texas Rio Grande Valley
Rapid Manufacturing Of Critical Industrial Parts: A Method Based On Reverse Engineering, Rapid Prototyping, And Coordinate Metrology, Immanuel Edinbarough, Aditya Akundi
Manufacturing & Industrial Engineering Faculty Publications
This paper presents a method of rapidly manufacturing industrial parts that are critical to the production. In order to assist the Advanced Manufacturing industry, a senior project team at the University of Texas Rio Grande Valley (UTRGV) applied Rapid Manufacturing (RM) to manufacture or fabricate critical machine parts used to maintain production machines. Failures of parts and tools in industrial settings cost money and hurt output. Usually, the problem arises when the tooling being used is one of a kind and repair or replacements come with long leadtimes. Other problems are encountered when original part or tool engineering drawing is …
Design And Implementation Of Spatial Augmented Reality In Large Scene,
2020
1. National Science Library, Chinese Academy of Sciences, Beijing 100190, China;;
Design And Implementation Of Spatial Augmented Reality In Large Scene, Shuiying Ge, Shuman Liu, Shibiao Xu, Xiaopeng Zhang
Journal of System Simulation
Abstract: To get long distance marker recognition in Augmented Reality, three software development toolkits were used to construct the long distance marker-less registration technology based on depth sensor, and develop a new augmented reality system based on PC platform. The tracking system was constructed by Kinect and camera. Defects in the single camera tracking system for long distance tracking were improved, and human-computer interaction in Augmented Reality was realized. By the detailed description of the main function modules, such as position calibration module, maker-less virtual-real registration module, and natural interaction module, the system design concept was introduced. Experiment results show …
Solving Flexible Job-Shop Scheduling Problem By Improved Chicken Swarm Optimization Algorithm,
2020
1. Key Laboratory of Advanced Process Control for Light Industry, Jiangnan University, Wuxi 214122, China;;
Solving Flexible Job-Shop Scheduling Problem By Improved Chicken Swarm Optimization Algorithm, Shipeng Xu, Dinghui Wu, Kong Fei, Zhicheng Ji
Journal of System Simulation
Abstract: To solve the flexible job-shop scheduling problem (FJSP) more effectively, an improved chicken swarm optimization (ICSO) algorithm was proposed. A flexible job-shop scheduling model was established for the purpose of minimizing the machine makespan. The improved chicken swarm optimization algorithm was presented. Algorithm improved the update formula of chicks and combined the advantages of simulated annealing algorithm and dynamic inertia cosine weight strategy, which achieved an effective balance of global search and local exploration. According to simulating and testing four standard functions and a flexible job shop scheduling model and compared with particle swarm optimization (PSO) and chicken swarm …
Study On Balanced Energy-Consumption Routing Protocol Of Airfield Single-Lamp Monitoring System,
2020
School of Electronic Information and Automation, Civil Aviation University of China, Tianjin 300300, China;
Study On Balanced Energy-Consumption Routing Protocol Of Airfield Single-Lamp Monitoring System, Gao Mei, Bingyuan Wang, Dandan Zhang, Zhaorong Sun
Journal of System Simulation
Abstract: To extend the sensor node lifetime and balance the energy consumption of the wireless sensor network, on the basis of the protocols AL-CAME (Airfield lighting-clustering algorithm based on max energy) and ECOMP (Efficient cluster-based communication protocol), a clustered hierarchy protocol of balanced energy-consumption was proposed for the airfield single-lamp monitoring system. According to the protocol, every two sensor nodes formed a cluster, and the node with the highest remaining energy was elected to be cluster head which was responsible for data aggregation within the cluster. The balanced routing algorithm was adopted in data-transmission from cluster head to …
Study For Solar Seasonal Storage System In Transition Season,
2020
Qingdao Technological University, Qingdao 266033, China;
Study For Solar Seasonal Storage System In Transition Season, Liu Long
Journal of System Simulation
Abstract: The COP (Coefficient of Performance) of the GSHP system has decreased gradually year after year caused by imbalance energy loads especially in heating-dominated climate zones. The solar thermal energy storage system in transition season can solve the problems effectively. The practice of solar seasonal storage was carried out and supplied by a practical project. TRNSYS 16 was used to simulate the solar energy storage experiment process. The correctness of the model was verified by the experimental data and the simulation results were corrected. Results shows that the simulated results and the measured data were well matched with …
Robotic Manipulator's Visual Servo Control Based On Echo State Networks,
2020
Key Laboratory of Industrial Computer Control Engineering of Yanshan University, Qinhuangdao 066004, China;
Robotic Manipulator's Visual Servo Control Based On Echo State Networks, Guoyou Li, Xiafei Su, Xiaolei Qin, Xiangxue Shi
Journal of System Simulation
Abstract: The inaccuracy in robotic manipulator modeling, which due to the nonlinear and strong coupling of robotic manipulator itself, cannot be ignored on the study of the robotic manipulator control problem. Aiming at the inaccuracy in robotic manipulator modeling, this study led echo state network in the visual servo control system of robotic manipulator. In order to achieve the robotic manipulator positioning control, this study used the echo state network to identify inaccurate item and compensates the uncertainties of the model in the control law. The simulation model of the simulated system was built with MATLAB simulation software. The …
Design Of A Printed Circuit Board For A Sensorless Three-Phase Brushless Dc Motor Control System,
2020
California Polytechnic State University, San Luis Obispo
Design Of A Printed Circuit Board For A Sensorless Three-Phase Brushless Dc Motor Control System, Joshua Castle
Master's Theses
The use of brushless motors has increased in recent years due to superior performance characteristics compared with alternatives. The operation of a brushless motor is dependent upon a separate controller which is often in the form of a printed circuit board. As such, the size and performance capability of the controller can restrict the performance of the overall motor control system so advancements of these controllers further the potential use of BLDC motors. This project outlines the design of a PCB based, sensorless motor controller for operation of a three-phase BLDC motor powered by a 24 V, high current external …
Inventory Models For Deteriorating Items With Power Pattern Demand Rate,
2020
Universiti Malaya
Inventory Models For Deteriorating Items With Power Pattern Demand Rate, Olalekan Adaraniwon Amos
Student Works (2020-2029)
Inventory management has become a prevalent topic in the field of operational research over some decades now. It cuts across many areas like management sciences, statistics and engineering. However, research focusing on inventory model with power demand pattern is quite limited. Demand patterns are defined as different ways by which products are removed out of inventory to supply customers demand during the schedule period. Power demand pattern permits suiting the demand to a more practical situation. In this research, four deterministic inventory model for deteriorating items with power demand pattern has been developed. We considered in the first models an …
Meeting Temporary Facility Energy Demand With Climate-Optimized Off-Grid Energy Systems,
2020
Air Force Institute of Technology
Meeting Temporary Facility Energy Demand With Climate-Optimized Off-Grid Energy Systems, Jay F. Pearson, Torrey J. Wagner, Justin D. Delorit, Steven J. Schuldt
Faculty Publications
Remote and contingency operations, including military and disaster-relief activities, often require the use of temporary facilities powered by inefficient diesel generators that are expensive to operate and maintain. Site planners can reduce operating costs by increasing shelter insulation and augmenting generators with photovoltaic-battery hybrid energy systems, but they must select the optimal design configuration based on the region’s climate to meet the power demand at the lowest cost. To assist planners, this paper proposes an innovative, climate-optimized, hybrid energy system selection model capable of selecting the facility insulation type, solar array size, and battery backup system to minimize the annual …
A Multi-Criteria Logistics Analysis Of Photovoltaic Modules For Remote Applications,
2020
Air Force Institute of Technology
A Multi-Criteria Logistics Analysis Of Photovoltaic Modules For Remote Applications, Nathan Thomsen, Dimitri Papazoglou, Torrey J. Wagner, Andrew J. Hoisington, Steven J. Schuldt
Faculty Publications
Reliable electrical power grids are frequently unavailable or inaccessible in remote locations, including developing nation communities, humanitarian relief camps, isolated construction sites, and military contingency bases. This often requires sites to rely on costly generators and continuous fuel supply. Renewable energy systems (RES) in the form of photovoltaic (PV) arrays and energy storage present a rapidly improving alternative to power these remote locations. Previous RES literature and PV optimization models focused on economics, reliability, and environmental concerns, neglecting the importance of logistics factors in remote installations. This paper proposes additional optimization variables applicable to remote PV systems and compares PV …
