Simulation And Analysis On Coupled Vibration Of Fracturing Truck Process,
2020
1. College of Mechanical and Electrical Engineering Southwest Petroleum University, Chengdu 610500, China;;
Simulation And Analysis On Coupled Vibration Of Fracturing Truck Process, Chuan Wang, Zhenqiang Xie, Guorong Wang, Shimin Zhang, Hou Wen, Li Jun, Zhou Xu, Chu Fei
Journal of System Simulation
Abstract: In order to study the effect of vibration of engine and fracturing pump on truck body during fracturing operation, lumped parameter method and state space method were used to build multi-body dynamics coupling model between the balanced suspension, tires, engine, fracturing pump and the frame. Based on this model, the MATLAB/Simulink software was applied to simulate the characteristic of rotational speed, stiffness and damping of the 2 500 fracturing truck during fracturing operation. The results show that the maximum intensity of vertical vibration is stronger hundreds times than pitch motion. Vibration frequency range of 0~10 Hz …
Multipurpose Image Watermarking Algorithm For Progressive Transmission,
2020
1. School of Computer Information and Engineer, Zhejiang Gongshang University, Hangzhou 310018, China;;
Multipurpose Image Watermarking Algorithm For Progressive Transmission, Jianqiu Jin, Bangqing Cao, Wang Xun, Haiyan Wu, Bailing Yang
Journal of System Simulation
Abstract: Multipurpose watermarking, which has the property of both robust and semi-fragile watermarking, can realize two or more purposes in one algorithm, e.g. copyright protection and content authentication usually. It can be classified into multi-segment and single-segment watermark embedding. The latter is better in invisibility, but more challenging than the former. A multi-purpose image watermarking algorithm with single-segment watermark embedding for progressive transmission was proposed. It embedded a watermark abstracted from original image into middle and low-frequency coefficients of block DCT transform. In the watermark embedding process, the intensity of watermark could be dynamically adjusted according to the local texture …
Carrier Disposition Pwm Control With No Dead Zone For Tnpc Inverter,
2020
School of Electric and Electronic Engineering, Harbin University of Science and Technology, Harbin 150080, China;
Carrier Disposition Pwm Control With No Dead Zone For Tnpc Inverter, Wenjuan Li, Feng Jie, Wang Chao
Journal of System Simulation
Abstract: After the addition of dead zone, the carrier disposition PWM modulation method could have some problems, such as distortion of current waveform and decreasing of voltage utilization ratio. Taking the TNPC type three-level inverter as a researching object, a novel method of the carrier disposition PWM modulation with no dead zone for three-level inverter was proposed, in which three PWM modulation signals were generated by using triple carrier wave. By analyzing the effect caused by the dead zone in different operating states, on and off rules of power switches were derived. Simulation results in MATLAB/Simulink environment show that the …
Parameters Optimization For Variable Speed And Pitch Controller Of Wind Turbine Based On Bladed,
2020
School of Control and Computer Engineering, North China Electric Power University, Changping District, Beijing 102206, China;
Parameters Optimization For Variable Speed And Pitch Controller Of Wind Turbine Based On Bladed, Gao Feng, Wang Wei, Xinmei Ling
Journal of System Simulation
Abstract: Due to nonlinearity and time-varying parameters of wind power system, its controller parameters are hard to be calculated and tuned during the process of design and optimization. The linear model which is suitable for parameters tuning was built through model linearization of Bladed and model reducing-order algorithm. The PI parameter was tuned with the IM-PSO (Immune Memory Particle Swarm Optimization). Moreover, the gain coefficient of optimal torque control and the gain divisor of adaptive PI pitch control conducted optimizing calculation based on the identification parameters of Bladed. A set of optimization method for variable speed and pitch controller …
Decoupling Control Of Poultry Hatching Process Based On Α-Order Neural Network Inverse System,
2020
School of Computer and Information Engineering, Central South University of Forestry & Technology, Changsha 410004, China;
Decoupling Control Of Poultry Hatching Process Based On Α-Order Neural Network Inverse System, Guoxiong Zhou, Junchao Li, Aibin Chen
Journal of System Simulation
Abstract: The poultry hatching process is a complex biological process, in which coupling between temperature, humidity and oxygen concentration is serious, and conventional control methods can not guarantee the stability of three parameters. An α-order inverse system decoupling control method for poultry hatching process was proposed. The three factors were grouped by coupling degree analysis, using α-order neural network inverse system to control the two parameters whose coupling degree is stronger, another parameter would be controlled by fuzzy controller, thus ensuring the stability of the three parameters. The experimental results show the effectiveness of this method.
Performance Evaluation Of Automated Warehouse Based On Markov Chain,
2020
1. Logistics School, Beijing Wuzi University, Beijing 101149, China;;
Performance Evaluation Of Automated Warehouse Based On Markov Chain, Xiangguo Ma, Tongjuan Liu, Wang Li, Rongfen Jiang
Journal of System Simulation
Abstract: It is necessary that the way of evaluating the AS/RS is scientific and feasible. However the majority of existing evaluate methods is static and qualitative, whose analysis results deviation, to a certain extent, from the real data. To support the improvement of the AS/RS use, the performance of AS/RS with a dynamic and quantitative method was analyzed. Specifically, the automated stereoscopic warehouse performance evaluation indicators were established; by using Marco analysis, the mathematical model of performance evaluation was got; based on ARENA software, the feasibility and validity of the mathematical solution model were verified.
Novel Distance Measure Between Intuitionistic Fuzzy Sets,
2020
Air and Missile Defense College of Air Force Engineering University, Xi'an 710051, China;
Novel Distance Measure Between Intuitionistic Fuzzy Sets, Luo Xiao, Weimin Li
Journal of System Simulation
Abstract: Distance measure is a basic and crucial notion of set theory. Since the intuitionistic fuzzy sets (IFSs) were put forward, distance between IFSs has been widely concerned by some researchers and many types of measures have been proposed. Most of them have counter-intuitive cases and ignore the characteristics of three parameter properties of IFSs. The concept of fuzzy distance was introduced, which embodied the characteristics of classical distance and highlights the characteristics of hesitance index simultaneously. A new fuzzy distance measure was proposed, and the corresponding proof was included. An artificial benchmark test set of distance measure was constructed …
Visualization Of Multi-Dimensional Effectiveness Indicator Of Weapon System Of Systemsbased On Fusion Manifold Learning,
2020
1. Department of Information Operation & Command Training, NDU of PLA, Beijing 100091, China;;
Visualization Of Multi-Dimensional Effectiveness Indicator Of Weapon System Of Systemsbased On Fusion Manifold Learning, Jianfei Ding, Guangya Si, Yafeng Shi, Liu Yi
Journal of System Simulation
Abstract: It is an important way to compare the comprehensive characteristics of weapon system of systems (WSoS) by means of visualization method to display the various effectiveness indicators information of WSoS construction planning scheme in simulation test. A visualization method for multi-dimensional effectiveness indicator was proposed based on fusion manifold learning. The indicator items and scheme items were converged from high-dimensional space to the same two-dimensional space. The density calculation was used to calculate the effect degree between the multidimensional indicator and scheme. The final multidimensional indicator visualization effect was achieved by radiological calculation. Two sets of experiments were …
Construction Method Of Reconnaissance Assistant Decision Model,
2020
1. Information Operations and Command Training Department, National Defense University, Beijing 100091, China;;2. Bureau Five, Department Three, Strategic Support Force, Beijing 100029, China;;
Construction Method Of Reconnaissance Assistant Decision Model, Guo Rui, Xiaoyuan He, Zhu Feng
Journal of System Simulation
Abstract: The fog of war in modern battlefield information big data generated by the judgment of the battlefield commander had a strong interference, which could increase the difficulty of decision-making. The use of reconnaissance and early warning forces is the beginning of mastering the initiative of the battlefield. Intelligent auxiliary investigation command is to achieve this goal. On the basis of the simulation system field data of a certain operations, through extracting the key information of reconnaissance order, combined with establishing the labels of reconnaissance effect, an auxiliary decision model aimed at reconnaissance and early warning is designed. This model …
Virtual Flight Modeling And Simulation Of Air-Launched Anti-Ship Missile,
2020
School of Automation Science and Electrical Engineering, Beihang University, Beijing 100083, China;
Virtual Flight Modeling And Simulation Of Air-Launched Anti-Ship Missile, Zhipeng Sun, Guanghong Gong
Journal of System Simulation
Abstract: The relationship between the parameters affecting aerodynamic force was studied, and the aerodynamic coefficient was properly linearly simplified. According to the type of airborne anti-ship missile performance model, the "black box modeling" and extrapolation method was adopted to determine its aerodynamic coefficient, a typical anti-ship missile six degrees of freedom of the simplified dynamic model was established. By studying the flight phases after the missile launch, the flight trajectory model of each flight phase was established by using the control method of the track angle. The whole flight trajectory process of the missile attacking a target was realized and …
Implementation And Application Of Complex System Modeling And Simulation Language Compiler,
2020
1. Beihang University, Beijing 100191, China;;
Implementation And Application Of Complex System Modeling And Simulation Language Compiler, Zhou Wen, Chi Peng, Bohu Li, Song Xiao
Journal of System Simulation
Abstract: Simulation language is a key technology of integrated simulation based design software environment. A difficulty of developing simulation language is the compiler that automatically transfers simulation language Semantics to programming language such as C++. The contents and features of CMSL were introduced. And a compiler which could analyze simulation text written in CMSL was implemented. A decouple method for Discrete System was proposed and integrated in the compiler. The features object-oriented and components oriented of CMSL were verified by an example with its ability to describe discrete system.
Research On Visual Objective Test Method Of High-Level Flight Simulator,
2020
Beijing Bluesky Aviation Technology Co. , Ltd, Beijing 100085, China;
Research On Visual Objective Test Method Of High-Level Flight Simulator, Zhangfa Liu, Huiyong Li
Journal of System Simulation
Abstract: With the development of commercial aircraft, the demand of high-level flight simulator will increase. In addition to development and production, qualification test is a key link to ensuring the quality of simulator. Visual system plays an important role of flight simulator. In order to meet the requirement of qualification from CAAC, visual objective test based on main qualification test guide of flight simulator was developed. It is very significant that test requirements, test theory and test methods of visual objective test item were researched deeply, including transport delay, field of view, system geometry, surface contrast, brightness, surface resolution, light …
Modeling And Dynamic Research Based On Ritz Series For Ball Screw Drive System,
2020
1. AECC Commercial Aircraft Engine Co., LTD, Shanghai 200241, China;;2. Shanghai Engineering Research Center of Civil Aero Engine, Shanghai 200241, China;;3. Institute of Advanced Manufacturing Technology, Hefei Institute of Physical Science, Chinese Academy of Sciences, Changzhou 213164, China;
Modeling And Dynamic Research Based On Ritz Series For Ball Screw Drive System, Rongrong Qian, Minzhou Luo, Jianghai Zhao, Li Tao, Li Lu
Journal of System Simulation
Abstract: To analyze the vibration performance of the ball screw drive system, the finite element model (FEM) of the simplified system by Ansys/Workbench was given to acquire the vibration mode and shape. Based on the vibration shape calculated from FEM, a set of hybrid basis function was used to generate the new Ritz series for building the system motion equation of the axial and torsional vibration. The pitch of the ball screw was considered in the method. A mathematical model which was easy to design the controller was developed. Through the numerical simulation, the modal characteristics and shape of …
Thermal And Electric Load Coupling Analysis And Decoupling Coordinated Control In Heat Supply Units,
2020
State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources,North China Electric Power University, Beijing 102206, China;
Thermal And Electric Load Coupling Analysis And Decoupling Coordinated Control In Heat Supply Units, Tuoyu Deng, Tian Liang, Jizhen Liu
Journal of System Simulation
Abstract: Due to large scale wind power integration, heat supply units hardly meet the AGC (automatic generation control) requirement by the existed coordinated control system. It is necessary to analyze coupling characteristics of thermal and electric load thoroughly. A transfer function matrix including characteristics of heat supply part was gained by small deviation linearization of a dynamic unit's model. Coupling characteristics was analyzed based on variable pairings of the existed coordinated control system and decouplers were designed. Relative gain matrix measure and simulation were used to compare the coupling extent before and after decoupling. Simulation experiments show that adding static …
Artillery Company Firepower Assignment Model And Algorithm,
2020
1. Department of Information Operation & Command Training, National Defense University, Beijing 100091, China;;2. Artillery Training Base of General Staff, Xuanhua 075100, China;
Artillery Company Firepower Assignment Model And Algorithm, Xuezhi Lü, Lisheng Chang, Xianwen Wang, Xinhui Zhao
Journal of System Simulation
Abstract: In view of deficiency of traditional firepower assignment method and characteristics of modern artillery, the model and algorithm of firepower assignment of artillery company were studied. The firepower assignment problem of artillery company was described, and the resolving concept was discussed. Three firepower assignment modes based on resolving concept were introduced. The idea of getting optimal solution of firepower assignment with Monte Carlo simulation and golden section search were analyzed. The model and algorithm were validated with an example.
Travel Time Prediction Of Urban Road Based On Deep Learning,
2020
1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China;;2. National Road Traffic Management Engineering Technology Research Center, Beijing 100084, China;;
Travel Time Prediction Of Urban Road Based On Deep Learning, Weiwei Zhang, Ruimin Li, Zhongjiao Xie
Journal of System Simulation
Abstract: Travel time prediction of urban road is a significant support for urban intelligent transportation system. Four types of LSTM neural network architecture were selected to predict the urban road travel time. The number of nodes in the LSTM hidden layer was fixed to determine the optimal input length of the model. The input length of the model was fixed and the predictive performance of the four LSTM models under different hidden layer nodes and considering spatial correlation were tested respectively. The performance of spatial LSTM model was compared with four traditional models, for example, BP neural network. The results …
Image Retrieval Using Weighted Vocabulary Tree With Location Information,
2020
Key Laboratory of Advanced Control Light Process, Jiangnan University, Wuxi 214000, China;
Image Retrieval Using Weighted Vocabulary Tree With Location Information, Chen Ying, Jiayu Guo
Journal of System Simulation
Abstract: Aiming at the positional information ignorance problem in image retrieval based on SIFT feature matching, an image retrieval approach using weighted vocabulary tree based on the spatial location information was proposed. The vocabulary tree is used in the method to quantify SIFT features as the visual words, converting the image match into the visual words' weight vector match. Because only visual words' weight match ignored the mutual position effect, SIFT points' spatial location information was generated, and was classified into the position effect of visual words according to affiliation between SIFT points and visual words. The spatial location information …
Effect Of Properties Of Synchronous Belt On Vibration Characteristics Of A Polishing Machine,
2020
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310000, China;
Effect Of Properties Of Synchronous Belt On Vibration Characteristics Of A Polishing Machine, Baibing Sun, Zhongyu Piao
Journal of System Simulation
Abstract: To form slurry film, hydrodynamic-suspension polishing machine needs polishing clearance extremely small, so any slight vibration will make tremendous influence on machining. The effect of different properties of synchronous belt on vibration characteristics of polishing machine was simulated by Workbench. Motion analysis shows the parameters which influence on transverse vibration of synchronous belt. Orthogonal test was designed and simulation was made by using above parameters. The results released that the material played an important role than the belt width and tension force. According to actual situation, optimum combination was obtained. Consequently, the stability of the machine was obviously improved. …
Two Power Sliding Mode Neural Network Compensation Control For Space Robot After Target Capturing,
2020
Fujian Provincial Collaborative Innovation Center of High-EndEquipment Manufacturing, School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350116, China;
Two Power Sliding Mode Neural Network Compensation Control For Space Robot After Target Capturing, Cheng Jing, Chen Li
Journal of System Simulation
Abstract: The impact analyses of space robot capturing a target and stability control problem in the post-impact process were discussed. The dynamic models of space robot system and target were derived by multi-body theory. The impact effect of rigidcouplingmodel was analyzed by applying geometric relationship and principle of momentum conservation. Atwo power sliding mode neural network control scheme was proposed for the combined system after acquiring with uncertain system parameters and external disturbance. The convergence speed of the control system was guaranteed by applyingtwo power sliding mode reaching raw, and the uncertain part was compensated by using neural …
Modeling Of Steam Turbine's Governing System During Main Steam Valve Activity Test And Control Optimization,
2020
State Grid Hunan Electric Power Corporation Research Institute, Changsha 410007, China;
Modeling Of Steam Turbine's Governing System During Main Steam Valve Activity Test And Control Optimization, Sheng Kai, Shuangjian Peng, Xun Xin, Bochun Wang, Fu Qiang
Journal of System Simulation
Abstract: A Model of 300 MW thermal power unit's governing system of steam turbine is established to analyze its load fluctuation during main steam valve activity test. The model contains three sub-models; they are the model of turbine's governor during main steam valve activity test, the model of electric-hydraulic servo actuator, and the model of turbine considering governing valve's discharge characteristic. The analyses on these models indicate that mismatch among control model, configuration of DEH (Digital Electric Hydraulic Control System) and characteristic of the unit is the cause of load fluctuation. Through simulation, the method for load fluctuation suppression was …
