Operations Research, Systems Engineering and Industrial Engineering Commons^™

Intelligent Evaluation Of Simulation Training For Aerial Ammunition Technical Support, Xu Gang, Zhang Lei, Tian Lei

Journal of System Simulation

Abstract: Quantitative evaluation is an important part of the simulation training of the Aviation Ammunition technical support. In order to realize the automatic evaluation of the simulation training, intelligent evaluation technology is introduced, and a prediction model based on Sigmoid regression is proposed. On the basis of analyzing the linear relationship of the sample data of the performance indicators, a subset of the characteristic indicators is selected as the input of the prediction mathematical model. In order to avoid the gradient descent method falling into the local solution problem, the gradient descent + PSO algorithm is presented. After testing the …

Dynamics Modeling And Simulation Of Gait Rehabilitation Robot Based On Lie Groups And Lie Algebras Theory, Bingjing Guo, Jianhai Han, Xiangpan Li, Yan Lin

Journal of System Simulation

Abstract: A pneumatic-driven gait rehabilitation robot based on rigid mechanism and flexible driver is designed. To explore the dynamic characteristics of the human-robot harmony system constructed by patients and the exoskeleton robot, the dynamic models of human, robot and human-robot system in different gait phases are established based on Lie group and Lie algebra theory. The driving and energy characteristics of three rehabilitation training modes of passive, active assistance and resistance are analyzed. The robot joint driven moment and the human active moment are simulated to verify the Lie group and Lie algebraic modeling method and the dynamic model. It …

Cae Modeling And Fault Simulation For Instantaneous Action Mechanism With High Power And Heavy Load, Teng Lin, Tang Tang, Qiaojie Li, Chen Ming

Journal of System Simulation

Abstract: A FEM simulation of a high voltage circuit breaker under actual conditions is proposed to solve the high-frequency vibration and mechanical failure problems caused by the realistic factors such as the clearance and structural elasticity of the breaker. Its operating characteristic under the high power pulse load is analyzed and the influence of the spring stiffness and dimension error on the breaker’s motion characteristics was predicted. On the basis of the dependency of the breaker’s mechanical characteristics on potential faults, critical parameters and design defects are established. The new FEM of the a high-voltage circuit breaker will replace the …

Augmented Reality Interactive Media System For Ancient Buildings Based On Servomotor, Xingquan Cai, Zhe Yang, He Xin, Chen Chao

Journal of System Simulation

Abstract: Augmented reality is usually limited to the screen devices, and is difficult to realize the stereoscopic dynamic interaction of multiplayer. A large screen interactive display method based on the servo motor is prsented. The serial communication program to control the scanning reciprocating mode of the servo is designed. By using the edge detection methods and deep normal texture processing, the line draft of the ancient buildings is rendered. By combining the hardware and presentation application modules, the user interaction capabilities and seasonal effects is added to the showcase application modules. The experimental results show that the interactive media system …

Simulation Optimization Of Initial Fire Evacuation Schemes For Vertical Ship Lift, Chen Shu, Xi Yan, Jianping Wang, Menghan Shang, Li Zhi

Journal of System Simulation

Abstract: In order to improve the efficiency of fire evacuation in the initial stage of the vertical ship lift and reduce the evacuation time, the structure and evacuation channel of the vertical ship lift are analyzed to identity the vertical evacuation path. The vertical evacuation time is determined by comparing the evacuation time of stairs and elevator based on the docking rules of cargos. Aiming at the shortest vertical evacuation time the evacuation time of the different docking elevations is simulated to obtain the optimal evacuation plan. The results show that, when the distance between the docking elevation and the …

Adaptive Differential Crisscross Optimization Algorithm For Dynamic Economic Emission Dispatch Considering Wind Power, Panpan Mei, Lianghong Wu, Hongqiang Zhang, Huiying Wang

Journal of System Simulation

Abstract: Because of the randomness and fluctuation of the wind power, the large scale wind power integration makes the economic emission dispatch of power systems more complicated. By fusing the advantages of the differential evolution algorithm with the parameter self-adaption and crisscross optimization, a hybrid intelligent optimization algorithm called ADE-CSO is proposed to solve the dynamic economic emission dispatch considering wind power integration. A constraint handling technology is introduced to satisfy the feasibility of the power balance and ramp limits. To demonstrate the effectiveness of the proposed algorithm, a typical test case of five generator bus system is conducted and …

Attribute Proxy Re-Encryption For Ciphertext Storage Sharing Scheme On Blockchain, Xiaohong Zhang, Lanlan Sun

Journal of System Simulation

Abstract: In order to implement the information storage sharing service safely and efficiently, a blockchain storage sharing scheme supporting the attribute proxy re-encryption and keyword retrieval is proposed. By the nodes classification and ciphertext storage separation, the anti-collusion attack is better implemented. The smart contract design of the information transaction is introduced and the information sharing parties can communicate spontaneously without the participation of the central organization. By the attribute-based proxy re-encryption algorithm, the information owner can share the information with other users without re-encrypting, uploading, and downloading information, and relieves the burden of the high-frequency access of the cloud …

Work In Progress: Students' Perception Of Collaborative Online International Learning, Philip Appiah-Kubi, Jennifer Nichwitz

Engineering Management and Systems Faculty Publications

Teaching and learning in the digital age harness the opportunities created by internet technologies to distribute and learn various information all over the world. This is commonly referred to as connectivism, and it values the impact of stakeholder information appraisal skills, virtual and personal communication skills [1], and the sense of cultural awareness. Collaborative Online International Learning (COIL), a type of connectivism, typically involves instructors and students from at least two geographically and culturally distinct areas who collaborate virtually on a common project for four or more weeks.

The objective is to create a culturally diverse virtual environment where students …

Embedding Computer Simulation Based Classroom Activities To Enhance The Learning Experience For Manufacturing Systems, Tzu-Liang Bill Tseng, Md Fashiar Rahman, Richard Chiou, Ivan Arturo Renteria-Marquez, Aditya Akundi, Amit J. Lopes, Jeevarathinam Senthilkumar

Manufacturing & Industrial Engineering Faculty Publications

In recent time, manufacturing environment are bracing higher end technologies to achieve high productivity, efficiency and effectiveness. Due to the adoption of the sophisticated technologies, the system is becoming very complex and stochastic. Moreover, the manufacturing system is interconnected among its different subsystems and components, which cannot be described only through the theoretical explanation. Here, computer simulation can be integrated to design and visualize the stochastic and complex system. This paper uses the advantage of simulation to describe a series classroom activity using SIMIO software, which are deployed in industrial systems simulation course in the University of Texas at El …

Solar Photovoltaic Considerations For Operational And Warfighter Support Capabilities, Dylan Martin-Abood, Douglas Dudis, Torrey J. Wagner

Faculty Publications

This work highlights the fundamental mechanisms and historical perspective for military PV technology applications and addresses the operational considerations for effectively deploying PV technology. PV materials, structures and architectures have matured into competitive and readily available energy technologies based on their levelized cost of energy (LCOE). However, enhancing warfighting capabilities requires attention to systems considerations beyond cost per watt or LCOE. While PV is impractical for fighters and bombers as it can meet less than 1% of their power requirements, there are numerous areas that could benefit from the application of PV technology. For example, installing PV arrays on all …

Investigation Of The Process Of Self-Discharge Acid Batteries, Asilbek Kiryigitovich Mamatkulov, Eldor Ikromovich Ruzmatov, Gulniso Yulchievna Zhumaeva, Furkat Ilyasovich Erkabaev

Chemical Technology, Control and Management

In this study, investigations were conducted on the process of self-discharge of acidic car batteries. The dependence of battery discharge on environmental temperature has been studied. It was found that the self-discharge of batteries increases by up to 60% over 12 months when the temperature rises from +10⁰C to +40⁰С. Replacing the tin in the electrode alloy with a more electronegative metal has been shown to reduce the self-discharge process by up to 2% per month. Because, the self-discharge of electrode batteries made of lead-calcium alloy is relatively low, the consumption of working fluid is relatively …

Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …

Research Properties Of Solving Problems Of Parametric Optimization, Dilnoz Tulkunovna Muhamediyeva

Chemical Technology, Control and Management

A model of parametric optimization with fuzzy initial information is constructed. The conditions and areas of application of the main methods of the theory of fuzzy sets in studies of parametric optimization are determined. A connection is established between the stability of parametric optimization problems and fuzzy optimization problems. An algorithm for solving problems by the method of parametric programming is developed for fuzzy given initial information. The admissible region of the parametric programming problem and the value of its objective function at each point of this region depend on the parameter t. A description of the method for solving …

Development Of A Control Device And Algorithm For Autonomous-Moving Systems, Farhod Qosimov, Ru Jiang, Dong Zhang, Mirkhalil Ismailov

Chemical Technology, Control and Management

The article is devoted to improving the control and algorithm for Autonomous moving systems. The function of the controller is to provide communication between the control computer and the actuator. The ATmega2560 microcontroller is selected as the main processor. The electrical diagram of additional devices of the microcontroller is formed. Printed circuit boards consisting of separate blocks are made on the basis of the electrical circuit. To exchange information with external systems and process the received data, a special algorithm for the microcontroller has been created. The microcontroller is programmed based on this algorithm. The analysis of the functioning of …

International Higher Education Cooperation Under Conditions Of Fuzzy Terminology: Intellectual Mobility Vector, Ulugbek Vasikovich Mannanov, Igor Ivanovich Gancherenok

Chemical Technology, Control and Management

Terminology analysis of higher education internationalization process concerning joint educational programs is fulfilled. Fuzziness of used terminology is demonstrated. Joint higher education establishments development in the framework of fractal model is suggested as a strategic direction of higher education internationalization, enhancement of its quality and a concept of effective intellectual mobility.

Extraction Of Chitosan From Died Honey Bee Apis Mellifera, Gulnora Akmalovna Ixtiyarova, Dilshoda Azamovna Hazratova, Bobur Nosir O’G’Li Umarov, Oksana Muratbayevna Seytnazarova

Chemical Technology, Control and Management

This article presents the results of obtaining biopolymers of chitin and chitosan from a new promising source- died honey bee apis mellifera. To obtain chitin, at the first stage, the protein (deproteination) and mineral (demineralization) constituents of subpestilence, i.e. put them in soluble state and removed. Demineralization was carried out with 2 M hudrochloric acid for 5 hours at room temperature. The process of deproteination is carried out by processing the crushed raw materials with 1 N sodium hudroxide solution for 1 hour at a temperature of 80⁰С. Each process was accompanied by washing the raw materials to …

Remote Measurement Of Plant Biomass By Picosecond Laser Radiation, Abdushukur Abdugafurovich Mukhamedov, Abdirashid Saribaevich Rysbaev, Shamsiddin Norchaevich Ernazarov

Chemical Technology, Control and Management

A description is given of a high-speed optical recording system that uses a solid-state yttrium-aluminum garnet Nd3+ laser that generates a train of picosecond laser pulses. It is shown that by registering and temporarily scanning the secondary fluorescence radiation excited by a sequence of picosecond pulses, it is possible to remotely determine the biomass of plants based on a prematurely created bank of laboratory data.

Using Of Parametric Nonlinear Lc-Circuits In Stabilized Transducers Of The Number Of Phases, Ivan Mikhaylovich Bedritsky, Kamila Komilovna Jurayeva, Laziz Kholboboyevich Bozorov

Chemical Technology, Control and Management

The use of nonlinear circuits of an autoparametric nature with inductive and capacitive elements for obtaining the necessary phase shifts in single-phase-three-phase converters is considered. The amplitude-phase relations between the stresses of windings located on different rods of a three-core core are obtained. The conditions under which it is possible to stabilize the stresses of the artificial phases of the Converter, as well as the phase shifts between them, are shown.

Synergetic Control Of Nonlinear Dynamic Objects, Isomiddin Siddikov, Komil Usmanov, Noilakhon Yakubova

Chemical Technology, Control and Management

Considers the synthesis of effective control algorithms for a chemical reactor, which is the main one in the production of butyl alcohol. The method based on synergetic approach for transferring the apparatus from one capacity to another (specified) maintaining the required quality of the target component is proposed in order to ensure the stabilization of the concentration of target component at the outlet of the reactor under the conditions of uncertain disturbances affecting to an object. A mathematical model of the process based on a stoichiometric matrix taking into account the physicochemical properties of the process is developed. The control …

Application Of A Convolutional Neural Networks For Images Recognition, Avazjon Rakhimovich Marakhimov, Lyudmila Petrovna Varlamova

Chemical Technology, Control and Management

In the problems of image recognition, various approaches used when the image is noisy and there is a small sample of observations. The paper discusses nonparametric recognition methods and methods based on deep neural networks. This neural network allows you to collapse images, to perform downsampling as many times as necessary. Moreover, the image recognition speed is quite high, and the data dimension is reduced by using convolutional layers. One of the most important elements of the application of convolutional neural networks is training. The article gives the results of work on the application of convolutional neural networks. The work …