Research On Matching Measure And Simulation Of Matching Between Sports Industry Technology Innovation Persons And Organizations Under Fuzzy Information,
2020
School of P.E, Shandong University, Jinan 250061, China;
Research On Matching Measure And Simulation Of Matching Between Sports Industry Technology Innovation Persons And Organizations Under Fuzzy Information, Gao Yan, Jinhai Sun
Journal of System Simulation
Abstract: For the matching between sports industry technology innovation persons and organizations under fuzzy information, a new matching modal was proposed. The factors of sports industry technology innovation persons-organization fit were researched. The qualitative key influence factors were quantified using indirect measure based on interval number complementary judgment matrix of the experts. The matching fit modal of sports industry technology innovation persons and organizations was constructed from the perspective of organizational. It is to verify the feasibility and availability of the matching fit model by using a simulation example.
Modeling And Simulation Of Nonlinear Ultrasonic Evaluation For Steel Damage By Finite Element Analysis,
2020
Shanghai Key Laboratory of Power Station Automation Technology, School of Mechatronics Engineering and Automation,Shanghai University, Shanghai 200072, China;
Modeling And Simulation Of Nonlinear Ultrasonic Evaluation For Steel Damage By Finite Element Analysis, Yanyan Liu, Shiwei Ma
Journal of System Simulation
Abstract: A method was developed to theoretically determine the creep damage of steel by using the nonlinear ultrasonic technique. A two-dimensional finite element model was built to simulate the creep damage of the material and the ultrasonic wave propagation through the degraded material. The nonlinear phenomenon of wave distortion was due to the microstructural changes of the material, which caused distortion that accumulated with propagation distance. Based on the model, the nonlinear parameter of the second-harmonic wave increased with the increase of temperature, which gave some guidelines for the evaluation of the early stage of the degradation of mechanical properties …
Topology-Aware Dynamic Load-Balancing Of Conservative Simulation,
2020
1. School of Computer Science, Beijing Institute of Technology, Beijing 100081, China;;
Topology-Aware Dynamic Load-Balancing Of Conservative Simulation, Yanlong Zhai, Nana Jia, Xinyu Zhang, Yang Kai, Duzheng Qing
Journal of System Simulation
Abstract: In parallel and distributed discrete-event simulation, the work load of logical processes (LPs) may become imbalanced due to the change of resources or newly generated events. This will increase LPs' waiting time in conservative simulations and the rollback times in the optimistic simulation. A topology-aware dynamic load-balancing approach of conservative simulation was proposed to solve this problem. The working time was monitored and calculated to detect whether imbalance occurs based on K-means clustering algorithm. The load balancing scheme was calculated according to the load and topology. Experimental results show that the proposed approach can balance the load rapidly and …
Affinity Propagation Based Improved Group Search Optimizer Clustering Algorithm,
2020
Key Laboratory of Advanced Control and Optimization for Chemical Process, Ministry of Education East China University of Science and Technology, Shanghai 200237, China;
Affinity Propagation Based Improved Group Search Optimizer Clustering Algorithm, Zhang Kang, Xingsheng Gu
Journal of System Simulation
Abstract: The essence of clustering is an optimization problem. It can be solved by swarm intelligent algorithms which are the popular research area in recent years. A novel Group Search Optimizer (GSO) algorithm named Fast Global Group Search Optimizer (FGGSO) was proposed. FGGSO improved the individuals' updating strategies of GSO, adopting the campaign strategy, destruction-construction strategy and accelerating-jumping strategy. By this means, the proposed algorithm improved the global and local search capability of the original GSO. Furthermore, based on this FGGSO algorithm, a novel improved AP algorithm was proposed. On account of deficiency of AP clustering unable to deal with …
Research And Application Of Multidisciplinary Optimization Technology Based On Virtual Prototyping,
2020
Beijing Simulation Center, Beijing 100854, China;
Research And Application Of Multidisciplinary Optimization Technology Based On Virtual Prototyping, Tao Luan, Junhua Zhou, Baocun Hou
Journal of System Simulation
Abstract: The main body of the article briefed the total frame, composing, application case of multidisciplinary optimization technology for weapon equipment system,and introduced 5 kinds of multidisciplinary optimization method detailedly. It took a certain equipment's virtual prototyping optimization design requirement in the engineering develop phase as the background, and advanced the way of multidisciplinary virtual prototyping optimization based on local subsystem analysis viably, shortened form LSA-IDF. Then through an actual case application, the article constructed the weapon equipment system's virtual prototyping optimization design flow, actualized intelligent optimization design based on virtual prototyping. Finally it sums up the applying …
Design And Implementation Of Electromagnetic Spectrum Visualization System,
2020
1. National Key Laboratory of Science and Technology on Multi-Spectral Information Processing, School of Automation, Huazhong University of Science and Technology, Wuhan 430074, China;;
Design And Implementation Of Electromagnetic Spectrum Visualization System, Bin Fang, Ma Jie, Keyu Sun
Journal of System Simulation
Abstract: Battlefield environment, filled with all kinds of devices with frequency electromagnetic signals, results in complex and rapidly changing electromagnetic environment. And the uncertainty brought by the complexity and the time variability not only makes it hard to predict the result of a war, but also leads to higher requirements for the current electromagnetic visualization platform serving for decision. To satisfy the visual needs for the electromagnetic spectrum data in the battlefield environment, the electromagnetic spectrum trend was designed in the perspective of temporal, spatial, frequency, and the energy domain. Four situations were proposed: equipment frequency radiation situation, spectrum …
Integrated Modeling Method Of Flight Director And Guarantee Process,
2020
1. China State Shipbuilding Corporation System Engineering Research Institute, Beijing 100094, China;;
Integrated Modeling Method Of Flight Director And Guarantee Process, Yongliang Luo, Zhang Jun, Yuanhui Qin, Han Sheng, Yuanming Wang
Journal of System Simulation
Abstract: The flight director and guarantee process as a kind of typical complex process, the modeling problem has become the current hot and difficult problem in the research field of the complex processes. An integrated modeling method of flight director and guarantee process was proposed combined with the typical process equipment air command and support building requirements. The following several aspects were mainly elaborated: The meta model of flight director process, service operation sequence modeling, machine process choreography. A prototype simulation and evaluation system was developed, and the rationality of the proposed method was analyzed combined with the application example.
Study On Key Techniques About Refueling Simulation In Air,
2020
93199th Army Flight Simulation Technology Research Institute, Harbin 150001, China;
Study On Key Techniques About Refueling Simulation In Air, Hongtu Li, Guan Wei, Jijiang Song, Guangxing Zhao, Zewei Ma
Journal of System Simulation
Abstract: The four key techniques of refueling flight simulation are studied on the base of a modern avion effective refueling flight simulation in the air. Characteristic of the usual scene simulation techniques is analyzed and the best scene simulation solution is found out, the theories of vortex interference and control & stability are explored deeply, and the models of vortex interference and control & stability are built with engineer data, system real time performance is researched, and the irregular back and fro of the refueling plane is worked off. the ideal result is harvested.
Research And Application Of Improved Cmms Descriptive Method,
2020
1. School of marine science and technology of Northwestern Polytechnical University, Xi'an 710072, China;;2. National Key Laboratory of Underwater Information Process and Control, Xi'an 710072, China;
Research And Application Of Improved Cmms Descriptive Method, Shengjie Wang, Fengju Kang, Han Hong
Journal of System Simulation
Abstract: In order to describe both the hybrid Agent behaviors and the mission space during the description process of combat system, the advantages of the PICS method and the CMMS describe method were combined. The ETDB describe method which stood for the entity was proposed by expanding the four factors of the CMMS describe method and was used for dividing the elements of MCSSU(The Man-machine Cooperative-combat System of Submarine and UUVs Formation) and concept modeling, and by describing an example, the method is compared with the traditional one. The concept models of MCSSU were formalized described by UML. The …
A Research Of Virtual Human Assembly Intelligent Simulation Technology,
2020
1. CIM Research Institute, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;;
A Research Of Virtual Human Assembly Intelligent Simulation Technology, Yunfei Yang, Gu Yan, Xiumin Fan, Qichang He, Shiguang Qiu
Journal of System Simulation
Abstract: Virtual human assembly simulation is an important part of virtual assembly simulation, and it is also a key link in the process of product design verification. To simulate the human operation more accurately, efficiently and really has been the research focus of the related areas. For the human body, which could be taken as a complex movement system, a multi rigid body model was built in virtual environment; the model was divided into different joint chains according to the operating characteristics of the human body and ergonomics knowledge was used to construct the model's optimal target function; a multi-objective …
Parallel Radiosity Based Light Distribution Simulation Within Virtual Plant Canopy,
2020
National Engineering Research Centre of Geospatial Information Technology, Spatial Information Research Center of Fujian Province, Fuzhou University, Fuzhou, 350002, China;
Parallel Radiosity Based Light Distribution Simulation Within Virtual Plant Canopy, Can Hou, Liyu Tang, Chongcheng Chen, Yifei Yang
Journal of System Simulation
Abstract: Owing to the computing-cost calculation of the form factor and the radiation energy in the traditional radiosity, a new method of parallel radiosity Based on CUDA (Compute Unified Device Architecture) was proposed to improve the performance of the implementation. Specifically, the implementation processes were as follows. The detailed 3D plant canopy model was loaded in the virtual scene. The solar altitude angle, solar azimuth and the radiation intensity were estimated according to the given time and the geographic location, and the light panel was generated afterwards, which was defined as radiation source on the basis of uniform triangular subdivision. …
Batched 3d Reconstruction Of Uav Images Fused Low Precision Position And Orientation Parameters,
2020
Institute of Geographic Spatial Information, Information Engineering University, Zhengzhou 450001, China;
Batched 3d Reconstruction Of Uav Images Fused Low Precision Position And Orientation Parameters, Xuefeng Cao, Qinghe Wang, Lixiang Xie
Journal of System Simulation
Abstract: The images sequence captured by UAV has the high resolution and high overlapping characteristics, so it is used in a wide range of scene reconstruction. However, the result of these state-of-art multi-view 3D reconstruction algorithms is unstable when dealing with large-scale UAV thousands of images. In this regard, the UAV low accuracy GPS / IMU parameters sequence was fused to the large-scale UAV image reconstruction process and the UAV sequence batched image reconstruction method was proposed. The image matching time and false matching number was reduced by using low-precision GPS / IMU priori information. Through the establishment of a …
Gpu-Based Fluid Collision Detection Method With Surface Of Three-Dimensional Scenes,
2020
Faculty of Information Science and Technology, Ningbo University, Ningbo 315211, China;
Gpu-Based Fluid Collision Detection Method With Surface Of Three-Dimensional Scenes, Liangping Liu, Liu Zhen, Fang Hao, Cuijuan Liu, Tingting Liu
Journal of System Simulation
Abstract: Virtual simulation of fluid phenomena is of great value, and SPH fluid simulation-based method can truly reflect the motion of the fluid. However, as the size of the fluid increasing, the computation becomes large, especially fluid collision detection in complex scenes significantly reduces the efficiency of fluid simulation. By using GPU to accelerate SPH physical calculation and collision detection, and use of new neighbors particles chain table building method for particles searching, can improve fluid simulation efficiency. By using voxel scene rasterization of sampling methods, the calculation of collision detection was speeded up, and the storage space was saved …
Improved Pivoting Ball Algorithm For Nonuniform Point Cloud Data,
2020
1. Engineering Research Center of Virtual Reality and Applications, Beijing 100875, China;;2. Beijing Key Laboratory of Digital Preservation and Virtual Reality for Cultural Heritage, Beijing 100875, China;
Improved Pivoting Ball Algorithm For Nonuniform Point Cloud Data, Silan Hu, Mingquan Zhou, Wuyang Shui, Zhongke Wu
Journal of System Simulation
Abstract: Ball Pivoting algorithm is mainly used for surface reconstruction of point cloud data, the algorithm starts from a seed triangle, the ball along the seed triangle a side of rotation until the ball is exposed to a point and the edge and the composition of a triangle. The main disadvantage of this algorithm is that when the point cloud data is not uniform when the ball in the rolling process does not contact the point, and therefore will have a hole. A non-uniform point cloud data for improved reconstruction of the Ball Pivoting algorithm of the original point cloud …
Ship Stern Wave Reconstruction From Single Viewpoint Video,
2020
School of Automation, Nanjing University of Science and Technology, Nanjing 210094, China;
Ship Stern Wave Reconstruction From Single Viewpoint Video, Yafei Guo, Yichao Yao, Lu Ying, Zhiyong Su
Journal of System Simulation
Abstract: To simulate the ship track in the marine virtual battle environment, a novel algorithm based on the single viewpoint video was proposed to reconstruct the ship stern wave. Gaussian filter was used to preprocess the video image and extract the long tail region from the video image; SFS algorithm was employed to compute the height field of the ship stern wave and generate its grid mesh; The normal of each vertex was computed based on the CUDA technology. The experimental results show that the reconstructed stern wave yields a good sense of reality. At the same time, it …
Research On Skin Color Image Post-Processing Methods For Gesture Recognition System,
2020
1. Key Laboratory of Marine Dynamic Simulation & Control for Ministry of Communications, Dalian Maritime University, Dalian 116026, China;;
Research On Skin Color Image Post-Processing Methods For Gesture Recognition System, Renda Wang, Yin Yong, Shengwei Xing
Journal of System Simulation
Abstract: Skin color region image post-processing methods suitable for gesture recognition system based on computer vision was proposed. To solve the problem of face and hand often occur simultaneously in the image frame, the training process and grouping strategy of AdaBoost face detector based on Haar-like template were studied, and a rapid culling method of face region based on fusion of color information was proposed. To reduce the influence of noise in skin color region image, impulse noise suppression and skin-like region rejection was proposed. The test results have shown that the proposed methods can greatly speed up the face …
Optimize Visual Hull With Concave Based On Depth Map,
2020
College of Computer and Communication Engineering, China University of Petroleum, Qingdao 266580, China;
Optimize Visual Hull With Concave Based On Depth Map, Guojun Chen, Wei Xin
Journal of System Simulation
Abstract: Traditional method based on color image can recover the boundary of an object, but it can't recover the concave part. Although reconstruction based on depth image can revert the concave part, but the result has bad boundary which means that the edge information lost seriously. The method that fused the depth and RGB image was proposed to solve the individual shortcomings. Based on space subdivision the origin visual hull was computed based RGB image and depth image individually. In the following step, the two type visual hulls were combined for analyzing concave area and then fused into one. A …
Research Of Light Weight 3d Models Repository And Key Techologies,
2020
School of Software Engineering, Tongji University, Shanghai 201804, China;
Research Of Light Weight 3d Models Repository And Key Techologies, Zhou Wen, Jinyuan Jia, Laixiang Wen, Zhao Long
Journal of System Simulation
Abstract: With the development of computer graphics, the demand of the 3D model based on the Internet is growing; the related 3D models repository platform and service have emerged. The prototype system of 3D lightweight models repository, at the same time, it introduced the related cloud platform architecture and the framework of system platform was proposed and realized, moreover, the realized process of the system and some related key technologies were introduced, including lightweight JSON conversion algorithm, dynamic transaction management mechanism, adapter-based dynamic model loading mechanism, lightweight progressive meshes algorithm, sketch-based retrieval Using Content-Aware Hashing. …
Constructing Panoramic High Dynamic Range Image Based On Different Amounts Of Exposures,
2020
School of Computer Science and Technology, Changchun University of Science and Technology, Changchun 130022, China;
Constructing Panoramic High Dynamic Range Image Based On Different Amounts Of Exposures, Quan Wei, Wang Ying, Yanchun Wang, Xuyang Wang, Yunrui Zhu
Journal of System Simulation
Abstract: A method of constructing panoramic high dynamic range image was proposed. The classical method about different amounts of exposures was adopted by choosing sampling point carefully to generate better response curves for each child camera of the panoramic camera. Weighted method was applied to obtain panoramic response curve based on six response curves of each child camera. According to characteristics of spatial frequency, a template of panoramic image was selected, so as to complete the synthesis of high dynamic panoramic image. Experiments show that the response curve of panoramic camera can better reflect the characteristics, so the …
Three-Dimensional Virtual Simulation Of Overflow Dam,
2020
School of Mechanical and Automotive Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou 310018, China;
Three-Dimensional Virtual Simulation Of Overflow Dam, Guisheng Fang, Hongfa Wang
Journal of System Simulation
Abstract: Overflow dam is one of hydraulic structures widely used in the water conservancy projects. The surface structure of overflow dam and the open mode of sluice gate have huge influence to the flood flow. The Navier-Stokes equation was used as the turbulence control equation. The Smoothed Particle Hydrodynamics method was used to simulate the 3D flood flow. The shape of water flow and the distribution of pressure and the distribution of flow velocity were respectively analyzed in the case of different gate opening state. The experimental results show that the virtual simulation of overflow dam is the same as …
