Operations Research, Systems Engineering and Industrial Engineering Commons^™

Systems Statistical Engineering – Hierarchical Fuzzy Constraint Propagation, Hengameh Fakhravar, Hesamoddin Tahami

Engineering Management & Systems Engineering Faculty Publications

Driven by a growing requirement during the 21st century for the integration of rigorous statistical analyses in engineering research, there has been a movement within the statistics and quality communities to evolve a unified statistical engineering body of knowledge (Hoerl & Snee, 2010). Systems Statistical Engineering research seeks to integrate causal Bayesian hierarchical modeling (Pearl, 2009) and cybernetic control theory within Beer's Viable System Model (S Beer, 1972; Stafford Beer, 1979, 1985) and the Complex Systems Governance framework (Keating, 2014; Keating & Katina, 2015, 2016) to produce multivariate systemic models for robust dynamic systems mission performance. (Cotter & Quigley, 2018) …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

État Des Récentes Avancées En Matière De Développement De Sièges À Suspension, Subhash Rakheja, Pierre Marcotte, Karim Hamouda, Krishna Dewangan, Darshan Dorugade

Rapports de recherche scientifique

Dans divers secteurs d’activité du Québec, les conducteurs de véhicules sont exposés à des niveaux notables de vibrations globales du corps (VGC) et à des chocs intermittents, associés dans les deux cas à un risque accru de douleurs lombaires et de dégénérescence de la colonne vertébrale. Les sièges à suspension sont largement utilisés pour limiter l'exposition des conducteurs aux VGC. L’efficacité d'un siège à suspension à réduire les vibrations est fortement dépendante de la nature des vibrations du véhicule (amplitude, direction et fréquence). Un siège à suspension ne peut donc offrir une efficacité optimale que lorsque la suspension est mise …

State-Of-The-Art In Recent Developments Concerning Suspension Seats, Subhash Rakheja, Pierre Marcotte, Karim Hamouda, Krishna Dewangan, Darshan Dorugade

Rapports de recherche scientifique

Dans divers secteurs d’activité du Québec, les conducteurs de véhicules sont exposés à des niveaux notables de vibrations globales du corps (VGC) et à des chocs intermittents, associés dans les deux cas à un risque accru de douleurs lombaires et de dégénérescence de la colonne vertébrale. Les sièges à suspension sont largement utilisés pour limiter l'exposition des conducteurs aux VGC. L’efficacité d'un siège à suspension à réduire les vibrations est fortement dépendante de la nature des vibrations du véhicule (amplitude, direction et fréquence). Un siège à suspension ne peut donc offrir une efficacité optimale que lorsque la suspension est mise …

Evolution Of Publications, Subjects, And Co-Authorships In Network-On-Chip Research From A Complex Network Perspective, Weilong Chen, Xiaohang Wang, Ye Sun, Qiao Hu, Letian Huang, Yingtao Jiang, Amit Kumar Singh, Terrence Mak, Mei Yang

College of Engineering Faculty Research

The academia and industry have been pursuing network-on-chip (NoC) related research since two decades ago when there was an urgency to respond to the scaling and technological challenges imposed on intra-chip communication in SoC designs. Like any other research topic, NoC inevitably goes through its life cycle: A. it started up (2000-2007) and quickly gained traction in its own right; B. it then entered the phase of growth and shakeout (2008-2013) with the research outcomes peaked in 2010 and remained high for another four/five years; C. NoC research was considered mature and stable (2014-2020), with signs showing a steady slowdown. …

An Application Of An Unequal-Area Facilities Layout Problem With Fixed-Shape Facilities, Alan Mckendall, Artak Hakobyan

Faculty & Staff Scholarship

The unequal-area facility layout problem (UA-FLP) is the problem of locating rectangular facilities on a rectangular floor space such that facilities do not overlap while optimizing some objective. The objective considered in this paper is minimizing the total distance materials travel between facilities. The UA-FLP considered in this paper considers facilities with fixed dimension and was motivated by the investigation of layout options for a production area at the Toyota Motor Manufacturing West Virginia (TMMWV) plant in Buffalo, WV, USA. This paper presents a mathematical model and a genetic algorithm for locating facilities on a continuous plant floor. More specifically, …

Third Party Risk Management And Cyber Supply Chain Risk Management, Jerald Garner

Operations Management Presentations

Today’s business environment continues to be a challenge. Businesses whether small, or large leverage third-party vendors to provide critical services like data handling (security, transmitting, and storage), cloud storage/applications, and systems security monitoring.

Each business must ask themselves a few simple questions about one of their most valuable assets “Data”. If or when it leaves your secure working environment:

• How secure is your customer data in transit and storage?
• Do your third-party vendors handle your “critical information”?
  • Provide a secure environment for processing?
  • Comply with a proven Cyber Security Framework?
  • Perform a “Due Diligence” on-boarding step for the Nth vendors …

Research On Cgf-Oriented Intention Recognition Behavioral Modeling Framework, Xu Kai, Yunxiu Zeng, Wansen Wu, Quanjun Yin, Yabing Zha

Journal of System Simulation

Abstract: As an important cognitive behavior in Computer Generated Forces (CGF), Intention Recognition reasons the temporal relations between actions of friends and enemies to recognize their true intentions, and provides the observer with far more focused decision-making ability. In order to further formalize the modeling of CGF-oriented intention recognition, the paper reviews the worldwide research development from 1980s, along with the designs and implementations of different methods. Following the theory of Situation Awareness, the paper analyzes the situation awareness process of CGF, its impacting factors and constraints and proposes a generalized intention recognition framework considering different problem characteristics, constraints and …

Identification Of Main Steam Temperature System Based On Improved Particle Swarm Optimization, Zhenqian Cao, Yin Jiang, Jinhua Zhang

Journal of System Simulation

Abstract: Establishing an accurate mathematical model of main steam temperature is the basis of improving the performance of control system. Aiming at the problems of early maturity and slow convergence in traditional particle swarm optimization (PSO) algorithm in model identification, an improved PSO algorithm with shrinkage factor is proposed. The algorithm improves the global optimization capability and convergence speed of the algorithm by adjusting the shrinkage factor. The on-site operating data of a 350 MW circulating fluidized bed (CFB) boiler in a power plant in Shanxi province are used in the identification of the main steam model parameters, and the …

Dqn-Based Path Planning Method And Simulation For Submarine And Warship In Naval Battlefield, Xiaodong Huang, Haitao Yuan, Bi Jing, Liu Tao

Journal of System Simulation

Abstract: To realize multi-agent intelligent planning and target tracking in complex naval battlefield environment, the work focuses on agents (submarine or warship), and proposes a simulation method based on reinforcement learning algorithm called Deep Q Network (DQN). Two neural networks with the same structure and different parameters are designed to update real and predicted Q values for the convergence of value functions. An ε-greedy algorithm is proposed to design an action selection mechanism, and a reward function is designed for the naval battlefield environment to increase the update velocity and generalization ability of Learning with Experience Replay (LER). Simulation results …

Research On Path Tracking Control Strategy Of Four-Wheel Steering Intelligent Vehicle, Jingbo Zhao, Liangpeng Zhu, Chengye Liu

Journal of System Simulation

Abstract: Aiming at the instability of path tracking control of intelligent vehicle at high speed, a path tracking control strategy of four-wheel steering combined with differential braking is proposed. In the upper layer, the front wheel active steering controller is designed based on the path tracking model. In the lower layer, the integrated controller of active rear steering and additional yaw moment is designed using the sliding mode control method. The additional yaw moment is transformed into the control of single wheel by designing differential braking distribution strategy. Simulation results show that the tracking accuracy of the combined control strategy …

Fixed-Time Event-Triggered Formation Control For Multiple Uavs, Ye Shuai, Guoping Jiang, Yingjiang Zhou, Liu Shang

Journal of System Simulation

Abstract: To solve the quadrotor UAV formation control problem, an event-triggered fixed time formation control algorithm of multi quadrotor UAV system is studied. For the attitude loop control problem of UAV, the switching fixed time sliding surface is selected to make the system reach the equilibrium point in a fixed time when the system state is on the sliding surface. A fixed-time sliding mode controller is designed so that the system state which is not on the sliding surface can reach the sliding surface within a fixed time. In view of the position loop control problem of UAV, the event-driven …

Virus Propagation And System Simulation Based On Cellular Automata Model, Lijuan Zhang, Fuchang Wang, Zhengang Li

Journal of System Simulation

Abstract: A susceptible-latent-infected-cured-immune virus spreading model is established according to the characteristics of epidemic transmission and the actual urban spatial map model. Individuals in the environment are regarded as agents, and the spreading mechanism is established according to the principle of cellular. The effects of different strategies and different characteristics of virus spreading on epidemic have been studied. The role and effect of important factors on epidemic prevention and control method are discussed, and the model is validated taking Shijiazhuang epidemic as an example . The results show that the number of initial latent, the infectivity of disease, vaccination proportion …

Research On Accurate Gesture Recognition Algorithm In Complex Environment Based On Machine Vision, Xu Sheng, Wenyu Feng, Zhicheng Liu, Xintao Tu, Minrui Fei, Kun Zhang

Journal of System Simulation

Abstract: To address the issue of cross infection caused by elevator public buttons during COVID-19, a software algorithm based on machine vision for non-contact control of public buttons by gesture recognition is designed. In order to improve the accuracy of gesture recognition, an improved YOLOv4 algorithm is proposed. A Ghost module is designed based on attention mechanism, and the ResBlock module in YOLOv4 is improved to Ghost module. The experimental results show that, in the task of gesture recognition, the detection speed is improved by 14% and the detection accuracy is improved by 0.1% compared with the original model. The …

Simulation Of Civil Aircraft Takeoff Scenario Based On Mbse, Liangyu Zhao, Junjie Ye, He Qi, Guo Wei, Zhao Yong

Journal of System Simulation

Abstract: Aiming at the interactions and flaws of design being difficult to be fully discovered, the requirements being hard to be traced, the early verification of system design being difficult to be realized and so on, a Model-Based System Engineering (MBSE) method is adopted to realize the simulation of civil aircraft take-off scenario. Based on the analysis of civil aircraft takeoff scenario requirements, the civil aircraft takeoff scenario simulation architecture, take-off scenario discrete logic model, and continuous physical simulation model are established. The method of fusing the SysML model and Simulink model and the 3D visualization of simulation data …

An Equivalent Method Of Uav Simulating High-Altitude Reconnaissance Equipment Optical Imaging, Jiangang Tu, Xu Cheng, Wang Hui, Zenghui Shen

Journal of System Simulation

Abstract: Aiming at the situation that the actual image of enemy reconnaissance equipment is difficult to be obtained, and the process of using similar equipment of our army is complicated and expensive in the detection of the camouflage effect of our important military targets, an equivalent detection method of using the UAV aerial photography to generate the high-altitude optical reconnaissance images is proposed. The number of pixels in the equivalent image is determined by comparing the acquisition height and the optical imaging device’s parameters of the UAV and the high-altitude reconnaissance equipment. The compressed pixel value is calculated through the …

Joint Distribution Location-Routing Problem And Large Neighborhood Search Algorithm, Zhenping Li, Yuwei Zhao, Yuwei Zhang, Lining Xing, Ren Teng

Journal of System Simulation

Abstract: Based on the characteristics of two-echelon, multi-center, and heterogeneous fleets in urban logistics joint distribution system, the two-echelon joint distribution location routing problem is studied. The problem is formulated into a mixed integer programming model to minimize the total costs. An adaptive large neighborhood search algorithm (ALNS) for solving the model with multiple deletion and insertion operators is proposed to obtain neighborhood solution. The selection probability of each operator is adjusted according to the neighborhood solution to accelerate the convergence speed. Several test examples are generated based on the benchmark of location-routing problem. Both ALNS algorithm and Gurobi software …

Modeling And Simulation Of Crowd Multi-Perception Behavior Model In Closed Public Places, Ma Jun, Hu Jun

Journal of System Simulation

Abstract: The social forces-based multi-agent modeling method is used to build the crowd simulation models in most of the existing crowd behavior simulation software systems. From the perspective of cognitive psychology, combined with the spatial logic model of the generalized influence of the crowd obtained by the author’s previous research, and based on the sigmoid function, the mathematical model of the individual visual and auditory perception of the crowd is constructed. Taking the typical subway transfer hall as an example, the objective function of large passenger volume evacuation optimization is established to construct the crowd evacuation simulation model. The simulation …

High Performance Simulation Method And Test Platform For Full Envelop Of Flight Vehicle, Jianlin Wang, Sufang Chen, Tie Ming, Liu Jing, Zhang Jun

Journal of System Simulation

Abstract: In order to meet the needs of the overall performance simulation and verification of the vehicle with large subsamples and massive states, a high-performance simulation method is proposed, in which a parallel simulation architecture based on high-performance computers is established, the technologies and software such as decoupling of simulation tasks, real-time monitoring of simulation, concurrent conflict control and automatic aggregation of large-scale test results are realized, and a test platform for the large-scale parallel verification of flight performance is developed. Simulation results show that the method has high acceleration ratio and scalability, and can complete the verification efficiently, …

Research On Simulation And Optimization Of Maintenance Support Mode And Human Resources Auocation For Complex Equipment, Junhai Cao, Yiming Guo, Chuang Zhang, Qingyi Guo

Journal of System Simulation

Abstract: Aiming at the single maintenance support mode of the army’s complex equipment and the strong randomness of human resource allocation, the military-level equipment maintenance process is taken as the research object, the complex equipment maintenance plan, maintenance support mode, human resource configuration, and maintenance process flow are analyzed. The simulation model of a complex equipment maintenance workshop is constructed, the influence of maintenance plans, maintenance support modes, and human resource allocation on indicators of “maintenance support time” and “human resource satisfaction rate” is explored, the internal laws is analyzed and the manpower optimal allocation for the maintenance of …