Operations Research, Systems Engineering and Industrial Engineering Commons^™

Simulation-Based Optimization: Implications Of Complex Adaptive Systems And Deep Uncertainty, Andreas Tolk

VMASC Publications

Within the modeling and simulation community, simulation-based optimization has often been successfully used to improve productivity and business processes. However, the increased importance of using simulation to better understand complex adaptive systems and address operations research questions characterized by deep uncertainty, such as the need for policy support within socio-technical systems, leads to the necessity to revisit the way simulation can be applied in this new area. Similar observations can be made for complex adaptive systems that constantly change their behavior, which is reflected in a continually changing solution space. Deep uncertainty describes problems with inadequate or incomplete information about …

Combining Green Metrics And Digital Twins For Sustainability Planning And Governance Of Smart Buildings And Cities, Casey R. Corrado, Suzanne M. Delong, Emily G. Holt, Edward Y. Hua, Andreas Tolk

VMASC Publications

Creating a more sustainable world will require a coordinated effort to address the rise of social, economic, and environmental concerns resulting from the continuous growth of cities. Supporting planners with tools to address them is pivotal, and sustainability is one of the main objectives. Modeling and simulation augmenting digital twins can play an important role to implement these tools. Although various green best practices have been utilized over time and there are related attempts at measuring green success, works in the published literature tend to focus on addressing a single problem (e.g., energy efficiency), and a comprehensive approach that takes …

Precursors Of Email Response To Cybersecurity Scenarios: Factor Exploration And Scale Development, Miguel A. Toro-Jarrin, Pilar Pazos-Lago, Miguel Padilla

Engineering Management & Systems Engineering Faculty Publications

In the last decade, information security research has further expanded to include human factors as key elements of the organization's cybersecurity infrastructure. Numerous factors from several theories have been explored to explain and predict the multitude of information security-related behaviors in organizations. Lately, there has been a call for the study of specific cybersecurity behaviors in contextualized scenarios that reflect specific and realistic situations of a potential cyber-attack. This paper focuses on precursors of email response in situations that can be the origin of cybersecurity incidents in organizations (i.e., phishing attacks, ransomware, etc.). This study explores participants' intentions to follow …

Grounding Evaluation Capacity Development In Systems Theory, Sarah D. Klier, Raphael J. Nawrotzki, Nataly Salas-Rodríguez, Sven Harten, Charles B. Keating, Polinpapilinho F. Katina

Engineering Management & Systems Engineering Faculty Publications

While “systemic thinking” is popular in the context of capacity development and evaluation, there is currently a lack of understanding about the benefits to employing systems theory in evaluation capacity development. Systems theory provides a useful orientation to the work involved in complex systems (e.g. national evaluation systems). This article illustrates how evaluation capacity development practitioners can use systems theory as a conceptual tool to gain a better understanding of the functional aspects and interrelationships present within a given evaluation system. Specifically, the systems theory perspective can help elucidate the reasons for the success or failure of a given evaluation …

A Human Factors Study Of Risk Management Of Complex Agile Scrum Projects In Large Enterprises, Ravi Kalluri

Engineering Management & Systems Engineering Faculty Publications

Agile Project Management methods have gained phenomenal success in the IT software world in managing projects of high complexity and uncertainty. However, Agile projects come with their unique set of risks. This paper seeks to explore the risks posed by human factors to complex Agile Scrum projects in large enterprises. Project Risk Management is crucial in determining the future performance of a complex project. Increasing project complexity makes it more and more difficult to anticipate potential events that could affect the project and to make effective decisions to reduce project risk exposure. This is even more true for Agile projects …

Improved Warehouse For Smt Material Management Using Modern Technology Retrieval System And Better Traceability, Ferdinand Mabeya

All Graduate Theses, Dissertations, and Other Capstone Projects

Warehouse plays a vital role in the manufacturing and distributing goods from raw material to manufacturer and finally to the end-user. Optimizing warehouse material management will make an impact on productivity, quality, and on-time delivery. My thesis focuses on material management of surface mount (SMT) from suppliers, receiving and inspection, and warehouse to maximize efficiency. With SMT line costing over 2 million, the warehouse material management is improved. Things like cycle count and picking material are much faster. It makes the overall equipment efficiency (OEE) very low. To make this material management process possible, manufacturers must embrace Six Sigma and …

Printed Circuit Board Defect Detection Using Image Processing, Nandeera Kamalaja De Silva Munaweera Tanthirige

All Graduate Theses, Dissertations, and Other Capstone Projects

This study was conducted to verify the hypothesis of the possibility to design an Automated Defect Detection system at a budget using image processing software. Focusing mainly on simplicity of integration with the capability to inspect a high variation of PCB with less user input. Reference comparison method was utilized to construct the defect detection algorithm where a defect free reference PCB gets compared with an inspection image to identify defects and anomalies. The paper discusses the range of possible defects for inspection on non-assembled PCBs, suggests methods for image processing and presents a final inspection algorithm, including their testing. …

Importance Measure-Based Maintenance Strategy Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta M. Tomovic

Engineering Technology Faculty Publications

Maintenance is an important way to ensure the best performance of repairable systems. This paper considers how to reduce system maintenance cost while ensuring consistent system performance. Due to budget constraints, preventive maintenance (PM) can be done on only some of the system components. Also, different selections of components to be maintained can have markedly different effects on system performance. On the basis of the above issues, this paper proposes an importance-based maintenance priority (IBMP) model to guide the selection of PM components. Then the model is extended to find the degree of correlation between two components to be maintained …

Performance Degradation Based On Importance Change And Application In Dissimilar Redundancy Actuation System, Yadong Zhang, Chao Zhang, Shaoping Wang, Rentong Chen, Mileta M. Tomovic

Engineering Technology Faculty Publications

The importance measure is a crucial method to identify and evaluate the system weak link. It is widely used in the optimization design and maintenance decision of aviation, aerospace, nuclear energy and other systems. The dissimilar redundancy actuation system (DRAS) is a key aircraft control subsystem which performs aircraft attitude and flight trajectory control. Its performance and reliability directly affect the aircraft flight quality and flight safety. This paper considers the influence of the Birnbaum importance measure (BIM) and integrated importance measure (IIM) on the reliability changes of key components in DRAS. The differences of physical fault characteristics of different …

A Combined Additive - Deformation - Machining (Adm) Manufacturing Process With Controlled Microstructures, Ahmed Nabil Taher Elalem

Wayne State University Dissertations

ABSTRACTA COMBINED ADDITIVE - DEFORMATION - MACHINING (ADM) MANUFACTURING PROCESS WITH CONTROLLED MICROSTRUCTURES by AHMED NABIL TAHER ELALEM August 2022

Advisor: Dr. Xin WuMajor: Mechanical Engineering Degree: Doctor of Philosophy

Direct metal additive manufacturing provides great flexibility in 3D shaping compared to traditional manufacturing processes of metal casting, deformation followed by machining and joining for obtaining the final production shape. On the other hand, it suffered from its dendric microstructure produced during solidification. This study reports the development of new combined metal additive and deformation processes to take advantage and reduce/eliminate the drawback of individual processes. The heating source mainly …

Comparison Of Lean Healthcare Systems Engineering Process (Lhse) For Healthcare Improvement Projects With Earlier Improvement Initiatives, Bohdan W. Oppenheim, Michael H. Kanter, Aleksander Buczacki

Systems Engineering Faculty Works

A new process called Lean Healthcare Systems Engineering (LHSE) recently invented for improving healthcare workflows and designing new care is reviewed and compared to previous quality initiatives: PDSA, TQM, Six Sigma, Lean, Theory of Constraints, and several others. LHSE is applicable to workflow improvement or new care design projects in clinical environments, including hospitals, operating suites, emergency departments, clinics, imaging and clinical laboratories, pharmacies, population health, and telemedicine. LHSE integrates the strengths of Lean Six Sigma and Systems Engineering (SE). Lean’s overarching philosophy of “do what is necessary to deliver the value and reject everything else as waste” governed the …

Chemical Clean Automated Loader, Jordyn Bryner

Williams Honors College, Honors Research Projects

TTM Technologies (TTM) is a global printed circuit board (PCB) manufacturer. The work described in this report was completed in the TTM North Jackson, Ohio location. This plant focuses primarily on the manufacturing of rigid and rigid-flex PCBs for the aerospace and defense industry. TTM North Jackson has an ongoing labor dependency issue due to the shortage of workers the nation is facing. To solve this problem, TTM has focused the efforts of their new engineers and interns on automating processes that are labor dependent. The goal is to provide design guidance to be used later by TTM to automate …

Grinding And Super-Finishing Test Machine Project, Michael Simon

Williams Honors College, Honors Research Projects

A research project in The University of Akron to study grinding and super-finishing of silicon nitride ceramic was initiated by Dr. Siamak Farhad and sponsored by the Timken Company, with the assistance of undergraduate students Michael Simon, Ryan Hosso and Mathew Rozmajzl. The study required analysis of forces and scratches generated during grinding processes of silicon nitride samples. A testing assembly was designed and constructed to record the forces generated during grinding and super-finishing of silicon nitride samples in a computer-numerical-control machine. Silicon nitride samples were subjected to desired grinding and super-finishing operations and all forces generated during the process …

The Two-Echelon Vehicle Routing Problem With Transshipment Nodes And Occasional Drivers: Formulation And Adaptive Large Neighborhood Search Heuristic, Vincent F. Yu, Minh P. K. Nguyen, Kuza Putra, Aldy Gunawan, I. Gusti Bagus Budi Dharma

Research Collection School Of Computing and Information Systems

This research introduces a new variant of the two-echelon vehicle routing problem (2EVRP) called the two-echelon vehicle routing problem with transshipment nodes and occasional drivers (2EVRP-TN-OD). In addition to city freighters in the second-echelon network, a set of occasional drivers (ODs) is available to serve customers. ODs are the basis of a crowd-shipping system in which crowds with planned trips are willing to take detours to deliver packages in exchange for some compensation. To serve customers, ODs collect the assigned packages at either satellite served by first-echelon trucks or transshipment nodes served by city freighters. We formulate this problem as …

Moyens De Réduction Des Risques Lors Des Phases De Nettoyage Et De Désinfection Des Machines Dans Le Domaine Agroalimentaire : Étude Exploratoire France-Québec, Laurent Giraud, Jean-Christophe Blaise, Nellie Perrin, Yuvin Chinniah, Pascal Poisson

Rapports de recherche scientifique

L’industrie de la transformation alimentaire est le plus important employeur industriel au Québec avec près de 56 000 emplois dans plus de 1 400 établissements en 2016. Cependant, au Québec, la Commission des normes, de l’équité, de la santé et de la sécurité du travail (CNESST) estime que le degré de risque de la plupart des secteurs agroalimentaires est critique. Cette industrie est également considérée à haut risque en Europe, notamment en France et en Grande-Bretagne, ainsi qu’aux États-Unis. Les statistiques dans ces pays montrent que les accidents surviennent majoritairement lors de tâches courantes et prévisibles comme le nettoyage et …

Evaluating The Factors Influencing Alignment Of It And Business In A Cloud Computing Environment, Dr. Shailja Tripathi

Journal of International Technology and Information Management

Aligning IT with business strategically is the recent area of attention among researchers and practitioners because of its potential impact on organizational performance. Currently, large numbers of enterprises are migrating towards cloud computing as on-premise implementation of Information technology (IT) infrastructure is expensive. The purpose of this research is to examine the factors that influence the alignment of IT and business in cloud computing environment. Therefore, this study used the Strategic Alignment Maturity (SAM) model as a framework to validate the evolution of IT-business alignment in a cloud computing platform. A questionnaire-based survey method was employed for data collection. The …

Examining Factors Influencing Intention To Use M-Health Applications For Promoting Healthier Life Among Smartphone Users In Tanzania, Herman Mandari, Mahija Yahaya

Journal of International Technology and Information Management

Deaths related with Non-Communicable Diseases (NCDs) have recently increases, similarly, development of mobile technologies have paved a way in which Smartphone users can use m-health applications to address high level of sedentary behaviours that relates to negative health consequences. Therefore, this study was conducted to examine factors which may influence generation Y who are Smartphone users to adopt m-health applications in controlling NCDs in Tanzania. TAM theory was extended with awareness, trust and perceived cost to develop a research conceptual model of this study. Google form was used to developed online questionnaire which was distributed through social media platforms to …

The Relationship Between First Case On-Time Starts, Turnover Times, And Operating Room Productivity, Rhafia Bucoy

Walden Dissertations and Doctoral Studies

Operating room (OR) managers struggle to manage day-to-day surgical operations while meeting and exceeding organizational productivity amid the COVID-19 pandemic. The deferral of surgeries contributes to millions of backlogs of surgical case volume and unintended negative consequences. Grounded in the proposition that first-case on-time starts (FCOTS) and turnover time (TOT) are correlates of OR productivity, the purpose of this quantitative correlational study was to examine the relationship between FCOTS, TOT, and OR productivity. Archival data from 136 electronic surgical records were collected from two free-standing ambulatory surgery centers and analyzed using multiple regression. The results of the one-service, eye-specialized, ambulatory …

Mixed-Integer Programming Methods For Modeling And Optimization Of Cascading Processes In Complex Networked Systems, Cheng-Lung Chen

Electronic Theses and Dissertations, 2020-2023

Dynamics and growth of many natural and man-made systems can be represented by large-scale complex networks. Entity interactions and community interconnections within complex networks increase the level of difficulty for the investigation on structural network properties such as robustness, vulnerability and resilience. In this dissertation, we develop methodologies based on mixed-integer programming techniques to solve challenging optimization problems that model cascading processes in complex networked systems. In particular, we seek to provide decision making recommendations for problems related to different types of cascading processes in networks commonly considered in a variety of applications: interdependent infrastructure networks and social networks. In …

Assessing Patient Safety Culture In United States' Hospitals, Abdulmajeed Azyabi

Electronic Theses and Dissertations, 2020-2023

Patient safety is founded on continuous learning because there is an urgent need to report and learn from errors, accidents, near misses, and adverse events. The traditional approach to patient safety, based on forming mortality committees and investigating accidents, will no longer be effective. Frameworks, surveys, and assessment tools have been developed over the last decade to assist organizations in measuring and understanding their culture. This a retrospective cross-sectional study included 67,010 respondents from Agency for Health care Research and Quality (AHRQ) 2018 comparative database was analyzed using partial least squares structural equation modeling (PLS-SEM). This research explored whether the …