Methodology For Choosing An Appropriate Inland Vessels As A Floating Distribution Centers,
2016
University of Pardubice,
Methodology For Choosing An Appropriate Inland Vessels As A Floating Distribution Centers, Andrea Seidlova, David Sourek
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
The primary goal of this paper is to propose a methodology for the choice of an appropriate vessel type under the specific condition of floating distribution center. The right choice of the appropriate type of vessel has a fundamental influence on the long-term success of city logistic projects with water transport. In this paper, we propose a methodology for vessel choice according to its inner layout and technology of handling. The possibility of an application in practice will be defined for each option.
Integrated Versus Sequential Scheduling And Assignment At A Unit Load Cross-Dock,
2016
Erasmus University
Integrated Versus Sequential Scheduling And Assignment At A Unit Load Cross-Dock, Arpan Rijal, Marco Bijvank, Rene De Koster
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
Within a cross-dock, the assignment of trucks to dock-doors and the scheduling of trucks to be processed are two major operational decisions. Conventionally, assignment and scheduling decisions are made sequentially. However, solving the two problems sequentially can lead to sub-optimal solutions because the objectives of the two problems are in conflict with each other. To gain further insights, we create an integrated model which is capable of simultaneously scheduling and assigning trucks at cross-docks. We contrast the integrated model with a sequential model which first schedules trucks for processing and then assigns them to dock-doors. Experiments demonstrate that the integrated …
A Heuristic Approach To Storage System Design With Simultaneous Assignment Of Goods,
2016
Universität München
A Heuristic Approach To Storage System Design With Simultaneous Assignment Of Goods, Tobias Staab, Willibad A. Gunthner
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
In the paper at hand, we analyze the planning of manually operated storage systems consisting of different storage areas. When solving design problems like dimensioning or equipment selection, the assignment of goods to storage areas has to be considered. Based on a general model to describe the geometry and performance calculation of a warehouse, we present a heuristic approach to assign goods to storage areas while simultaneously determining the design of the storage areas in a way that generates the lowest running costs. Our approach aims to support planners during the rough planning stage by providing a quick overview of …
Intermodal Hubs In The Physical Internet,
2016
Clemson University
Intermodal Hubs In The Physical Internet, Nadeepa Wickramage, Bill Ferrell
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
Distribution of finished goods is currently an effective but inefficient process that consumes significant quantities of fossil fuel to move empty assets. This results in increased costs that are passed to the consumer and unnecessarily increased carbon emissions. The Physical Internet (PI) is focused on shared logistics that could prove to be an important element of next-generation logistics systems. The idea is to store and transport goods in anonymous standard-sized containers so that transportation and warehousing can be efficiently shared by many companies including competitors. If implemented, this idea has the potential of dramatically increasing efficiency thereby reducing fuel consumption …
Analyzing Order Throughput Times In A Milkrun Picking System,
2016
Erasmus Universiteit Rotterdam
Analyzing Order Throughput Times In A Milkrun Picking System, J. P. Van Der Gaast, M.B. M. De Koster, Ivo J.B.F. Adan
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
E-commerce fulfillment competition evolves around cheap, speedy, and time-definite delivery. Milkrun order picking systems have proven to be very successful in providing handling speed for a large, but highly variable, number of orders. In this system, an order picker picks orders that arrive in real time during the picking process; by dynamically changing the stops on the picker’s current picking route. The advantage of milkrun picking is that it reduces order picking set-up time and worker travel time compared to conventional batch picking systems. This paper is the first in studying order throughput times of multi-line orders in a milkrun …
A Lagrangian Relaxation For Capacitated Single Allocation P-Hub Median Problem With Multiple Capacity Levels,
2016
Yuan-Ze University
A Lagrangian Relaxation For Capacitated Single Allocation P-Hub Median Problem With Multiple Capacity Levels, Ching-Jung Ting, Kuo-Rui Lu
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
In this paper we consider a capacitated single allocation p-hub median problem with multiple capacity levels (CSApHMPMC) in which the decisions are to determine the location of p hubs and their capacity levels, the single allocation of non-hub nodes to hubs in the logistics network. This problem is formulated as an integer programming model with the objective of minimizing the sum of total transportation cost and fixed cost of the selected p hubs with established capacity levels. A Lagrangian relaxation (LR) approach is proposed to solve the CSApHMPMC. The Lagrangian function that we formulated decomposed the original problem into smaller …
An Efficient Solution To The Mixed Shop Scheduling Problem Using A Modified Genetic Algorithm,
2016
Old Dominion University
An Efficient Solution To The Mixed Shop Scheduling Problem Using A Modified Genetic Algorithm, V. Nguyen, H. P. Bao
Mechanical & Aerospace Engineering Faculty Publications
The mixed job shop scheduling problem is one in which some jobs have fixed machine orders and other jobs may be processed in arbitrary orders. In past literature, optimal solutions have been proposed based on adaptations of classical solutions such as by Johnson, Thompson and Giffler among many others, by pseudopolynomial algorithms, by simulation, and by Genetic Algorithms (GA). GA based solutions have been proposed for flexible Job shops. This paper proposes a GA algorithm for the mixed job shop scheduling problem. The paper starts with an analysis of the characteristics of the so-called mixed shop problem. Based on those …
The Influence Of Operational Resources And Activities On Indirect Personnel Costs: A Multilevel Modeling Approach,
2016
Air Force Institute of Technology
The Influence Of Operational Resources And Activities On Indirect Personnel Costs: A Multilevel Modeling Approach, Bradley C. Boehmke, Alan W. Johnson, Edward D. White, Jeffery D. Weir, Mark A. Gallagher
Faculty Publications
Indirect activities often represent an underemphasized, yet significant, contributing source of costs for organizations. In order to manage indirect costs, organizations must understand how these costs behave relative to changes in operational resources and activities. This is of particular interest to the Air Force and its sister services, because recent and projected reductions in defense spending are forcing reductions in their operational variables, and insufficient research exists to help them understand how this may influence indirect costs. Furthermore, although academic research on indirect costs has advanced the knowledge behind the modeling and behavior of indirect costs, significant gaps in the …
Achieving Value Co-Creation In It Outsourcing,
2016
National Kaohsiung First University of Science and Technology
Achieving Value Co-Creation In It Outsourcing, Szu-Yuan Sun, Li-Shan Chen
Journal of International Technology and Information Management
Over the past few decades, information technology outsourcing has become a widely used and researched means for enterprises to enhance their performance. As future collaboration is the most desirable outcome between enterprises and IT outsourcing vendors, the purpose of this study is to construct a new model to examine: 1) whether information technology outsourcing satisfaction impact future collaboration, 2) whether value co-creation impact outsourcing satisfaction, 3)which factors influence value co-creation, and 4) whether trust influence enterprises’ commitments. This research assumes that: 1) trust predicts enterprises’ commitments; 2) customer orientation and participation, service quality, communication culture, and enterprises’ commitment predicts value …
Identifying Four Key Means Of Business Value Creation Using Enterprise Systems: An Empirical Study,
2016
Higher Colleges of Technology
Identifying Four Key Means Of Business Value Creation Using Enterprise Systems: An Empirical Study, Prithvi Bhattacharya
Journal of International Technology and Information Management
Enterprise Systems (ES) is increasingly becoming the choice of IT platform for most large organizations in the world. As a result, the potential of such systems to create more business value is of key interest to both industry and academia. The aim of this study is to identify the key means of business value creation that Enterprise Systems can enable. The contribution of this paper is that it identifies and proposes four key means by which Enterprise Systems can create business value: (a) Operational Efficiency (b) Mergers and Acquisitions, (c) Innovation (in product and process), (d) Strategic Decision Making. This …
Choice Of Agile Methodologies In Software Development: A Vendor Perspective,
2016
Indian Institute of Technology Madras
Choice Of Agile Methodologies In Software Development: A Vendor Perspective, Sriram Rajagopalan, Saji K. Mathew
Journal of International Technology and Information Management
The purpose of this research was to develop understanding about how vendor firms make choice about agile methodologies in software projects and their fit. Two analytical frameworks were developed from extant literature and the findings were compared with real world decisions. Framework 1 showed that the choice of XP for one project was not supported by the guidelines given by the framework. The choices of SCRUM for other two projects, were partially supported. Analysis using the framework 2 showed that except one XP project, all others had sufficient project management support, limited scope for adaptability and had prominence for rules.
Enhancing The Use Of Web 2.0 Technologies In Higher Education: Students’ And Lectures’ Views,
2016
University of the West of Scotland
Enhancing The Use Of Web 2.0 Technologies In Higher Education: Students’ And Lectures’ Views, Razep Echeng, Abel Usoro
Journal of International Technology and Information Management
Learning quality enhancement with Web 2.0 tools needs good implementation framework and lessons from best practice. However, there is not much research on what constitutes best practice in the implementation of Web 2.0 in learning activities. This research seeks to fill this gap by seeking the views of students and lecturers on increased adoption of Web 2.0 social tools in learning activities. The research reports on the quantitative and qualitative study carried out in UK. This research reveals that improved learning experience with the use of Web 2.0 tools in higher education is positively related to perceived usefulness, perceived ease …
Trends In Commercial-Off-The-Shelf Vs. Proprietary Applications,
2016
University of Nebraska at Kearney
Trends In Commercial-Off-The-Shelf Vs. Proprietary Applications, Vijay K. Agrawal, Vipin K. Agrawal, A. Ross Taylor
Journal of International Technology and Information Management
This study examines factors valued by IS managers in deciding if COTS software is a viable alternative to proprietary software. The results indicate managers who anticipate increased usage of COTS packages in 5 years used the same top three factors in the formation of their decisions to adopt COTS as their colleagues who anticipated either zero change in COTS usage or an increased usage of proprietary software used in deciding not to adopt COTS software. Managers anticipating increased COTS usage had a statistically significant higher value for each of those items compared to managers not anticipating growth in COTS software.
Online Trust Cues: Perceptions And Application,
2016
Emporia State University
Online Trust Cues: Perceptions And Application, Antonina A. Bauman
Journal of International Technology and Information Management
This qualitative study analyzes perceptions of online trust cues as identified by shoppers from three countries: Germany, Russia, and the USA. A novel approach of the repertory grid method is used to study online trust cues in business-to-consumers commercial online transactions. This study resulted in the list of web site elements and features that consumers recognize as trust cues and use to evaluate e-vendor’s trustworthiness. Findings show that out of fourteen categories of online trust cues, identified by online shoppers, three categories of online trust cues are found to be common across three cultures while eleven categories are culture specific. …
Evaluation Of Classification And Ensemble Algorithms For Bank Customer Marketing Response Prediction,
2016
Tilburg University
Evaluation Of Classification And Ensemble Algorithms For Bank Customer Marketing Response Prediction, Olatunji Apampa
Journal of International Technology and Information Management
This article attempts to improve the performance of classification algorithms used in the bank customer marketing response prediction of an unnamed Portuguese bank using the Random Forest ensemble. A thorough exploratory data analysis (EDA) was conducted on the data in order to ascertain the presence of anomalies such as outliers and extreme values. The EDA revealed that the bank data had 45, 211 instances and 17 features, with 11.7% positive responses. This was in addition to the detection of outliers and extreme values. Classification algorithms used for modelling the bank dataset include; Logistic Regression, Decision Tree, Naïve Bayes and the …
The Perceived Business Benefit Of Cloud Computing: An Exploratory Study,
2016
Global ECommerce Service, Inc
The Perceived Business Benefit Of Cloud Computing: An Exploratory Study, Thomas Chen, Ta-Tao Chuang, Kazuo Nakatani
Journal of International Technology and Information Management
The objective of the research is to study the benefits of cloud computing perceived by adopters and examine the impact of moderating factors on the relationship between the type of cloud computing and the perceived benefit. The moderating factors include firm size and value-chain activities. A measurement instrument of a 5-point Likert scale was administered on businesses of different sizes in Taiwan. The benefit of cloud computing measured in the study were: cost reduction, improved capability and enhanced scalability. The results show that the perceived benefit of cloud computing varies depending on the type of cloud computing, the value chain …
Using Mavt To Incorporate Public Perception When Choosing A Nuclear Fuel Cycle,
2016
Virginia Commonwealth University
Using Mavt To Incorporate Public Perception When Choosing A Nuclear Fuel Cycle, Stephen Clement
Theses and Dissertations
Nuclear energy is a source of carbon free power. With many countries striving to make deep carbon cuts in their energy sectors, nuclear energy could be a large part of the solution. One of the main obstacles standing in the way of the use of nuclear energy is the issue of used nuclear fuel disposal. According to the NEI, the U.S. creates about 2000 metric tons of used nuclear fuel per year and has generated around 76,000 metric tons of used nuclear fuel over the last 4 decades. While there are technical problems that need to be solved, it is …
การปรับปรุงกระบวนการออกแบบชุดสายไฟในรถยนต์,
2016
คณะวิศวกรรมศาสตร์
การปรับปรุงกระบวนการออกแบบชุดสายไฟในรถยนต์, ทิวารัตน์ สวัสดี
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยฉบับนี้ ทำการศึกษาเกี่ยวกับบริษัท ออกแบบสายไฟในรถยนต์ที่ให้ความสำคัญในเรื่องความพึงพอใจของลูกค้า ซึ่งเป็นหนึ่งในปัจจัยที่สำคัญที่สุดในการออกแบบผลิตภัณฑ์ ด้วยเหตุนี้บริษัท จึงใช้วิธีการทั้งหมดในการออกแบบกระบวนการออกแบบผลิตภัณฑ์ตามความต้องการที่หลากหลายของลูกค้า จึงทำให้มีการเปลี่ยนแปลงการออกแบบเป็นจำนวนมาก งานวิจัยนี้มีวัตถุประสงค์เพื่อปรับปรุงกระบวนการออกแบบชุดสายไฟในรถยนต์ที่มีผลต่อกำหนดการผลิตโดยใช้การวิเคราะห์ Fault Tree และ Failure Mode and Effect Analysis (FMEA) เป็นเครื่องมือหลัก FTA ใช้สำหรับการวิเคราะห์สาเหตุหลักและใช้ FMEA เพื่อจัดลำดับความสำคัญสูง (RPN) ซึ่งแสดงให้เห็นถึงความสำคัญของปัจจัยต่างๆในชุดสายไฟในรถยนต์ที่มีผลกระทบสูงต่อการออกแบบชุดสายไฟในรถยนต์ และหลังจากมีการปรับปรุงกระบวนการออกแบบและควบคุมปัจจัยที่ส่งผลเสียต่อกระบวนการออกแบบจะพบการขอเปลี่ยนแปลงการออกแบบที่ลดลงจาก 0.26 ครั้ง ต่อการออกแบบ 1 ครั้ง เป็น 0.06 ครั้ง ต่อการออกแบบ 1 ครั้ง แสดงถึงกระบวนการออกแบบที่ถูกปรับปรุงให้สามารถสร้างความพึงพอใจแก่ลูกค้าที่มีต่อผลิตภัณฑ์มากขึ้น
The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles,
2016
Old Dominion University
The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles, Ana M. Djuric, Vukica Jovanovic, Mirjana Filipovic, Ljubinko Kevac
Engineering Technology Faculty Publications
A novel methodology for the calculation, visualisation and analysis of the Reconfigurable Machinery Efficient Workspace (RMEW), based on the twist angles, is presented in this paper. The machinery's kinematic parameters are used for calculating the workspace, while the efficient workspace is associated with the machinery's path and includes the end-effector position and orientation. To analyse and visualise many different machinery efficient workspaces at the same time, the calculation is based on the previously developed and validated complex reconfigurable machinery's kinematic structure named n-DOF Global Kinematic Model (n-GKM). An industrial robot is used as an example to demonstrate …
Toward An Engineering Discipline Of Warehouse Design,
2016
Stewart School of Industrial and Systems Engineering
Toward An Engineering Discipline Of Warehouse Design, Leon Mcginnis, Timothy Sprock
14th IMHRC Proceedings (Karlsruhe, Germany – 2016)
Warehouses today are complex dynamic engineered systems, incorporating automation, mechanization, equipment, fixtures, computers, networks, products and people, and they can support the flow of tens or hundreds of thousands of different items to enable fulfilling thousands or tens of thousands of orders daily. In that sense, they represent a design challenge that is not terribly different from the design of other complex dynamic engineered systems, such as a modern passenger airplane, an automobile, or a unique building. What is different is that the design of these other complex dynamic engineered systems typically follows some engineering design discipline. Here, we argue …
