Industrial Engineering Commons^™

Optimal Global Supply Chain And Warehouse Planning Under Uncertainty, Avnish Kishor Malde

All Dissertations

A manufacturing company's inbound supply chain consists of various processes such as procurement, consolidation, and warehousing. Each of these processes is the focus of a different chapter in this dissertation.

The manufacturer depends on its suppliers to provide the raw materials and parts required to manufacture a finished product. These suppliers can be located locally or overseas with respect to the manufacturer's geographic location. The ordering and transportation lead times are shorter if the supplier is located locally. Just In Time (JIT) or Just In Sequence (JIS) inventory management methods could be practiced by the manufacturer to procure the raw …

Adaptive Design And Flexible Approval Of Clinical Trials, Saeid Delshad Sisi

All Dissertations

Dose-finding clinical trials are among the most critical cornerstones of the healthcare system. In this broad research area, there are many decision making problems that are extremely challenging to address. However, a small improvement may result in significant benefits to the society. Dose-finding clinical trials are extremely expensive and require multiple time-consuming and complicated R&D phases. Despite all the costs and the long time these trials need to conclude (on average over ten years for each new drug/technology), only less than 15\% of these trials successfully end up in a new approved drug entering the market. This problem is even …

Scheduling, Complexity, And Solution Methods For Space Robot On-Orbit Servicing, Susan E. Sorenson

Graduate Theses and Dissertations

This research proposes problems, models, and solutions for the scheduling of space robot on-orbit servicing. We present the Multi-Orbit Routing and Scheduling of Refuellable On-Orbit Servicing Space Robots problem which considers on-orbit servicing across multiple orbits with moving tasks and moving refuelling depots. We formulate a mixed integer linear program model to optimize the routing and scheduling of robot servicers to accomplish on-orbit servicing tasks. We develop and demonstrate flexible algorithms for the creation of the model parameters and associated data sets. Our first algorithm creates the network arcs using orbital mechanics. We have also created a novel way to …

Evaluation Of Generative Models For Predicting Microstructure Geometries In Laser Powder Bed Fusion Additive Manufacturing, Andy Ramlatchan

Computer Science Theses & Dissertations

In-situ process monitoring for metals additive manufacturing is paramount to the successful build of an object for application in extreme or high stress environments. In selective laser melting additive manufacturing, the process by which a laser melts metal powder during the build will dictate the internal microstructure of that object once the metal cools and solidifies. The difficulty lies in that obtaining enough variety of data to quantify the internal microstructures for the evaluation of its physical properties is problematic, as the laser passes at high speeds over powder grains at a micrometer scale. Imaging the process in-situ is complex …

A Quality Systems Economic-Risk Design Theoretical Framework, Abdallah S. Thefeid

Engineering Management & Systems Engineering Theses & Dissertations

Quality systems, including control charts theory and sampling plans, have become essential tools to develop business processes. Since 1928, research has been conducted in developing the economic-risk designs for specific types of control charts or sampling plans. However, there has been no theoretical or applied research attempts to combine these related theories into a synthesized theoretical framework of quality systems economic-risk design. This research proposes to develop a theoretical framework of quality systems economic-risk design from qualitative research synthesis of the economic-risk design of sampling plan models and control charts models. This theoretical framework will be useful in guiding future …

Modeling The Impact And Accelerating The Process Of Transitioning To A Sustainable Healthy Diet Through Decision Support Systems, Prince Agyemang

Graduate Theses and Dissertations

Food production and consumption are essential in human existence, yet they are implicated in the high occurrences of preventable chronic diseases and environmental degradation. Although healthy food may not necessarily be sustainable and vice versa, there is an opportunity to make our food both healthy and sustainable. Attempts have been made to conceptualize how sustainable healthy food may be produced and consumed; however, available data suggest a rise in the prevalence of health-related and negative environmental consequences of our food supply. Thus, the transition from conceptual frameworks to implementing these concepts has not always been effective. This paper explores the …

Park Equity Modeling: A Case Study Of Asheville, North Carolina, Anisa Young

All Theses

Parks and greenspaces are publicly available entities that serve the vital purpose of promoting multiple aspects of human welfare. Unfortunately, the existence of park disparities is commonplace within the park setting. Specifically, marginalized individuals encounter limited park access, insufficient amenity provision, and poor maintenance. To remedy these disparities, we propose a process in which we select candidate park facilities and utilize facility location models to determine the optimal primary parks from both existing and candidate sites.

We note that platforms currently exist to identify the geographical areas where residents lack sufficient access to parks. However, these platforms do not yet …

Probabilistic Risk Assessment For Life Extension Of Turbine Engine Rotors, Jace A. Carter, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Maintaining the component service life beyond its historical limits requires the ability to accurately quantify component reliability and address the uncertainties in material responses. A probabilistic method for predicting the total fatigue life was developed and applied to determine the probability of failure of a Ti-6Al-4V turbine disk component. The total fatigue life incorporates a dual mechanism approach including the crack initiation life and propagation life while simultaneously determining the associated initial flaw sizes. A microstructure-based model was employed to address the uncertainties in material response and relate the crack initiation life with crack size. The propagation life was characterized …

Validation Of Experimental And Finite Element Biomechanical Evaluation Of Human Cadaveric Mandibles, Shirish M. Ingawale, Deepak G. Krishnan, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background: Biomechanical analysis of human mandible is important not only to understand mechanical behavior and structural properties, but also to diagnose and develop treatment options for mandibular disorders. Therefore, the objective of this research was to generate analytical and experimental data on mandibles, construct custom 3D models, and compare the analytically derived maximum strains with strain gage data in five areas of interest for each mandible. Methods: We investigated the surface strains in the cadaveric human mandibles under different configurations of cyclic compressive loads in an experimental setting and compared these experimental strain data with results derived from computational finite …

Characterization Of In Vivo Damage On Retrieved Total Shoulder Glenoid Liners, Eric Cheatwood, Gerard Simon, Lynn Crosby, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

An attempt was made to retrieve glenoid liners from revision surgery to undertake a retrospective study to measure the resulting in vivo damage. Since the glenoid liners are circumferential, the curvature changes at every point in the component, an “assisting arm” was designed to hold the liner firmly, thus allowing accurate microscopic measurements. We characterized the damage in terms of pitting, embedded debris, complete fracture, abrasion, deformation, delamination, burnishing, grooving, and scratching that took place mutually exclusively. This study of 26 liners showed embedded debris was the most underrated damage mode found on the liners, followed by pitting and abrasion, …

Etiology Of Breast Development And Asymmetry, Elisabeth N. Adkins, Shaina Anderson, Trevor Mckoy, Nakachi Maduka, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Etiology of breast development and asymmetry is a fascinating research topic physiologically as well as pathophysiology from a certain condition. The shape, contour, and size of the breast are unique to each female. These factors are influenced by genetics, weight, exercise, menstruation cycles, pregnancy, menopause status, and age. An attempt was made to research the breast development at fetal development and transitioning into adulthood and menopause. Additionally, we compare breast development in males to the developments in females. Although breast asymmetry is experienced by all women, it ranges from grossly undetectable to the need for surgical intervention. It is thought …

Application Of Probabilistic Methods To Turbine Engine Disk Life Prediction And Risk Assessment, Paul Copp, Ashley Whitney-Rawls, Jace Carter, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Turbine engine disk life prediction and understanding the associated risk remains a significant challenge for today’s designer. Despite advances made in materials testing and characterization, as well as, the application of damage tolerance and linear elastic fracture mechanics modeling, there remains a void in properly assessing loading, geometry, and material design property variability. Add to this the application of advanced hybrid and composite material systems and the need to accurately deal with material variability is even greater. There still remain incidents of failure of critical components which were not properly accounted for by the existing analytical methods, testing, and inspections …

Assessment Of Energy Efficiency In Beverage Industry, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

The brewery industry has a significant contribution to the national income. However, it is also associated with energy intensive processes and pollution. In this work, the energy efficiency assessment of the largest brewery in Tanzania i.e., Tanzania Breweries Limited has been conducted. Energy consumption analysis was conducted according to IEEE SA 739 1995. Important parameters used to assess brewery energy efficiency were boiler efficiency and losses, equipment energy productivity as well as load factor. It was found that the main energy consumers are packaging (54.63%), brewing (29.30%) and utilities (15.17%). More importantly, it was found that about 68% of the …

A Model For Sustainable Adoption Of Solar Photovoltaic Technology In Tanzania, Joseph Kihedu

Tanzania Journal of Engineering and Technology (TJET)

The aim of the study was to develop a sustainable model for enhancement of the solar PV technology adoption in Tanzania. The model was developed based on the identified barriers that hinder the adoption of solar PV technology and adopted the best strategies from successful projects. Further, the drivers and activities were developed based on selected best strategies from successful projects. The identified barriers to the adoption of solar PV technology, which are grouped into five associated categories and their significances, are lack of access to finance (32%), non-enforcement of policy and regulation (31%), technical (18%), lack of awareness (9%) …

Effect Of Temperature, Catalyst Concentration And Time, On Polylactic Acid Production From Sisal Boles Juice By Ring Open Polymerization, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

Polylactic acid (PLA) is a biodegradable and renewable alternative to non-biodegradable petrochemical-based polymers that is environmentally friendly and green. PLA can be made from a variety of agricultural wastes that contain sugars, such as sisal boles. This study aimed at analysing the possibility of producing PLA from lactic acid (LA) produced from sisal bole. A 2n factorial design was used to analyse the effects of temperature (160-180ºC), time (1-2 hrs) and tin octoate catalyst concentration (0.025-0.05%) on the PLA yield during polymerization. Minitab Version 20.2.0 was used to design the experiment and analyse the effects on the responses through ANOVA. …

Production Of Paper Pulp Using Sisal Fiber Waste From Sisal Spinning Processes, Ekael Mbise

Tanzania Journal of Engineering and Technology (TJET)

Disposal of large volumes of textile waste is an escalating problem for textile industries. Sisal spinning industry is the one of the textile industries releasing large volumes of textile waste in the landfills. The rising costs, and reduction of available space together with increasing stringent environmental measures are making burying and land filling of textile waste, a declining option. This study therefore explores recycling options where the potential of using sisal fiber waste produced during sisal spinning processes as raw materials for the production of paper pulp was investigated. Sampling was done at 21stCentury Holdings Limited allocated at Chang’ombe industrial …

Viability Analysis Of Ubungo Ii Gas Power Plant Efficiency Improvement Using Co-Generation System, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters …

Effectiveness Of Mesoporous Bioglass In Drug Delivery, Sheila Galbreath, Bailey Krueger, Taylor Frazier, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Since the invention of bioactive glass 50 years ago, it has become a versatile material used in healthcare in a variety of applications and compositions. Bioactive glass has shown superior capabilities of drug delivery compared to traditional carriers. For example, time-released medications are less likely to reach toxic levels, while delivering a specific, therapeutic dose to a localized area. The objective of this paper is to investigate the properties and effectiveness of mesoporous bioglass (MBG) as a drug delivery carrier. A literature review of various polymer coated 45S5 Bioglass^® loaded with vancomycin was analyzed to determine their drug release …

Degradation Performance Modeling And Optimal Maintenance Planning Of Deteriorating Critical Infrastructures, Hung Q. Nguyen

USF Tampa Graduate Theses and Dissertations

Serving as the backbone of the nation’s economy, a large and growing number of deteriorating critical infrastructures, such as transportation and water infrastructures, are underperforming, aging, becoming structurally deficient, and must be repaired or replaced. Due to the influence of a variety of factors (e.g., material structure, design, operation, and environmental conditions) at different phases of lifecycle and the costly data acquisition process, field degradation of deteriorating infrastructures is highly uncertain with limited degradation data. The co-location and spatial proximity between many infrastructures, such as road and water infrastructures, further makes them physically and operationally interdependent. The sheer deterioration of …

Computational Methods For Solving The Combinatorial Optimization Problems In Transportation, Xufei Liu

USF Tampa Graduate Theses and Dissertations

This dissertation discusses three transportation problems. The first problem is a bi-level optimization problem that simultaneously optimizes facility locations and network design in hazardous materials transportation. In the upper level, the leader intends to reduce the facility setup cost and the hazmat exposure risk, by choosing facility locations and road segments to close for hazmat transportation. When making such decisions, the leader anticipates the response of the followers who want to minimize the transportation costs. A robust optimization approach with multiplicative uncertain parameters and polyhedral uncertainty sets is applied to deal with the uncertain risk and demand.

The second problem …