Mining Engineering Commons^™

Role Of Ergonomics In The Selection Of Stemming Plugs For Surface Mining Operations, Atta Ur Rehman, Muhammad Zaka Emad, Muhammad Usman Khan

Mining Engineering Faculty Research & Creative Works

Stemming plugs are one of the widely used accessories in surface mining operations. Stemming plugs assist conventional stemming material in gas retention and help in better fragmentation and explosive utilization. Effective use of the stemming plugs results in economic benefits and enhance the efficacy of the project. Economic and productive viability of stemming plugs have been conducted in depth by different researchers. Addition of stemming plugs to a new system requires ergonomic challenges for operators conducting drilling and blasting operation. Induction of a newer product in already established system is subject to overall positive feedback. This work investigates ergonomics of …

Predicting Fracture Extension Around A Borehole Using The Numerical Displacement Discontinuity Method, Nathaniel Schaefer

Theses and Dissertations--Mining Engineering

Prediction of blast damage radius is integral in the optimization of mining safety and production. The damage radius can be related to blasting variables such as fragmentation size as well as overbreak in hard rock. Various methods have been developed to predict and assess damage radius extension for individual holes to aid in blast design. These methods range from experimental and observational techniques to theoretical applications. Some of these methods have been used with a degree of success. However, many of them lack a comprehensive combination of experimental and theoretical contributions. Since post-blast environments are not conducive to assessing whether …

Proof Of Concept For The Development Of A Ground Vibration Sensor System For Future Research In Blasting, John Meuth

Theses and Dissertations--Mining Engineering

Ground vibrations from blasting are one of the leading limitations to mining (underground and surface). There is a need for a low-cost scalable vibration monitoring system to conduct large scale ground vibration projects in the mining industry. Studies conducted on ground vibrations use any number of different sensors to obtain their data, the different sensor capabilities and methods for data processing lead to uncertainties in the research and regulations set for ground vibrations. Commercial Systems do not allow researchers to obtain raw output data, and the data processing procedures are not provided or disclosed for these systems. In order to …

The Effect Of Delay And Sequence On Blasting Fragmentation Results, Tristan Worsey

Theses and Dissertations--Mining Engineering

Blasters use the delay between charges and the firing sequence of the explosive charges to help reduce vibrations and achieve the desired fragmentation. Although delay and sequence are recognized as very important for vibrations and fragmentation, only vibration models consider timing as a variable in the prediction tool, without any known model for fragmentation prediction based on the delay sequence. Of the few fragmentation models available, very few take delay into account and do not give guidance on row delay and/or sequence selections. With the invention of electronic detonators in 1984, there are new avenues to explore with sequence and …

The Potential Of Gold Mine Development Project : A Case Study Of Chifunde District In Mozambique, Sara Mario Mabecuane

Chulalongkorn University Theses and Dissertations (Chula ETD)

This research presents the results of the gold exploration activities developed in the district of Chifunde, Province of Tete in Mozambique. The works showed that in the study area there are two types of deposits which are primary and secondary deposits. There was clear evidence that they have undergone high-grade metamorphism of greenschist due to the grenade occurrences in hornblende in the form of porphyroblast which indicated a high probability of gold occurrence inside amphibolic schist. The results of the SGS laboratory revealed that all samples collected in the area contained gold ranging from 1 to 2,500 ppb, whereas in …

Characterization Of Rare Earth Elements In The Illinois Basin Coals, Alireza Valian

Theses and Dissertations--Mining Engineering

The purpose of this study is to characterize the distribution and occurrence of rare earth elements (REEs) in the coal and coal-related material from the Illinois Basin. For characterizing the distribution of REEs, 17 core samples were investigated from various parts in the basin. Also, several individual samples from coal preparation plants and isolated geological occurrences were included in the study. In result, the average REE concentrations were calculated on a bed-to-bed basis, although the distribution of REEs in the coal beds was found laterally and vertically heterogeneous. A number of trends were found that describe the variations. Most importantly, …

Investigation Into Mine Pillar Design And Global Stability Using The Ground Reaction Curve Concept, Ravi Chandan Ray

Theses and Dissertations--Mining Engineering

Pillars form an important support structure in any underground mine. A bulk of the overburden load is borne by the mine pillars. Thus, the strength of pillars has been a subject of detailed research over more than 6 decades. This work has led to the development of largely empirical pillar design formulations that have reduced the risk of pillar failures and mine collapse. Current research, however, has drawn attention to the fact that some of the assumptions used in the development of conventional pillar design methodologies are not always valid. Conventional pillar design methodology assumes that the pillars carry the …

Numerical Approximation Of The Ground Reaction And Support Reaction Curves For Underground Limestone Mines, Jesus Castillo Gomez

Theses and Dissertations--Mining Engineering

Pillar stability has been a matter of study for the last 70 years. The determination of pillar strength had taken different solutions and approaches over that time. This research has led to numerous empirical formulations that have reduced the number of pillar failures worldwide. However, new numerical approaches are being studied. In the last 20 years, the Ground Reaction Curve concept has been examined as a way of understanding the convergence of the rock-mass. Although the Ground Reaction Curve was first introduced in the civil tunneling industry, several authors have introduced the Ground Reaction Curve concept as an approach for …

Solution Tool To Predict Filter Cake Formation For Acid Mine Drainage (Amd) Slurries, Roberto Ecuador Martinez Ochoa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Acid Mine Drainage (AMD), also known as alkaline mine drainage resulted from abandoned and active coal mining areas has been a major water pollutant in the mid-Atlantic region of the United States affecting aquatic life, recreational areas, tourism, etc. AMD results from during and post mining activities all around the US and the world containing high levels of acidic materials such as sulfate and other heavy metals.

The United States Environmental Protecting Agency (EPA) has recommended the use of different mechanisms for mitigation purposes due to considerable existing and potential damage generated by AMD. This report focuses on the usage …

Application Of Geophysics And Remote Sensing Techniques For Economic Mineral Exploitation In Libya, Awad Abdussalam Henish Lemnifi

Doctoral Dissertations

“This study investigates crustal thickness and properties within the north central Africa region. Results obtained from 15 seismic stations belonging to the Libyan Center for Remote Sensing and Space Science are reported, in addition to 3 seismic stations publically available, using receiver functions, the first P-to-S receiver function investigation of the 410 km and 660 km depth discontinuities bounding the mantle transition zone (MTZ), and P wave tomography methods. The results from the first method show crustal thicknesses ranging from 24 km to 36 km (with uncertainties ranging between ±0.10 km and ±0.90 km). More specifically, crustal thickness ranges from …

Shock Wave Propagation Behavior At Corners And Crosscuts In Five Small-Scale Tunnel Scenarios, David Pierre Doucet

Masters Theses

"Shock wave propagation in tunnels and other enclosed environments is substantially more complicated than in an open-air or even a surface detonation. There is still much to learn about how shock wave properties change as a wave propagates in an enclosed space, such as a mine tunnel, inside of a building, or city street. The geometry of the enclosure will have a large role in the propagation of the shock wave. This means that many different tunnel designs must be studied. This work tested five different designs using a modular small-scale model. The scenarios tested were Straight-line, Single Turn, Around …

On The Investigation Of Hot Tearing Behavior Of Continuous Cast Steel, Yanru Lu

Masters Theses

”Hot tearing has long been recognized as a major problem that plagues the development of the continuous casting process and results in low-quality products. Understanding of the mechanisms and the required conditions for the hot tearing formation is important for industries but has not been well-established yet. Thus, this research focuses on the hot tearing issue observed in continuous cast steel, by providing a summary of the current research progress and then introducing a new laboratory method to determine the thermo-mechanical properties relevant to hot tearing of different steel grades under different solidification conditions. In this method, an apparatus was …

Additive Manufacturing Of Linear Shaped Charges To Address Run Up And Run Down Phenomena, Jason Ho

Masters Theses

”A shaped charge is an explosive device used to focus detonation energy in a desired direction. Additive Manufacturing (AM) can allow greater design freedom and geometric complexity for the liner portion of the shaped charge.

In this work, the following hypotheses were tested: 1) Adjusting the initial apex angle of a linear shaped charge liner reduces the amount of run up that occurs, and 2) implementing a backstop at the end of a linear shaped charge liner reduces the amount of run down that occurs.

Linear shaped charge liners with a continuously changing apex angle were created with additive manufacturing. …

Environmental Impact Of The Mechanical Coal Processing Plant, Witold Bialy, Wes Grebski, Greg Galecki, Wojciech Kaniak

Mining Engineering Faculty Research & Creative Works

The enrichment of hard coal is one of the stages of mineral resources management. It is aimed at adapting its quality parameters to different recipients' requirements, considered as a stage of mineral resources management. This process is treated as a stage of clean coal technologies or as a process of improving the economics of mining plants, which takes place in the Mechanical Coal Processing Plant (ZMPW). Adaptation of the quality of commercial coal products to the needs of specific recipients consists of removing useless components of the excavated material. In this publication, factors having a negative impact on the environment …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Evaluating The Effect Of Emulsion On Wax Deposition Prevention Of Oil From Fang Oil Field, Tanapol Ruengnam

Chulalongkorn University Theses and Dissertations (Chula ETD)

Due to the COVID-19 situation, the energy consumption demand right now declines. However, the trend predicted by EIA is that the demand will be fully recovered at the end of 2022. Thus, it is important to maintain the production without disruption from flow assurance issue. In addition, wax deposition is one of the important issues for flow assurance. To manage the wax deposition, there are 3 major methods which are mechanical, thermal and chemical methods. The chemical method can easily be utilized. For this study, wax deposition prevention is studied with chemical method. Also, the study is investigating the effect …

Cobalt Partitioning And Solubility In Low-Temperature Carbonate-Hydrothermal Systems, Seth Kurtis Coursey

Graduate Research Theses & Dissertations

Cobalt mineralization has been documented in low temperature Mississippi Valley-type (MVT) deposits in southeast Missouri. Lead and zinc are the most economically important metals in these deposits and are contained within galena (PbS) and sphalerite (ZnS), respectively. Cobalt is also mined in some of the deposits with cobalt-bearing ores, e.g., siegenite ((Ni,Co)3S4) and fletcherite (Cu,(Ni,Co)2S4), occurring stratigraphically below main-stage galena and sphalerite. The hydrothermal fluids responsible for cobalt mineralization are thought to be chemically distinct from the predominant MVT ore-bearing fluids and represent a distinct mineralizing event. Cobalt is likely transported as CoCl2 in hydrothermal fluids and sourced from structures …

Development, Analysis And Case Studies Of Impact Resistant Steel Sets For Underground Roof Fall Rehabilitation, Dakota D. Faulkner

Graduate Theses, Dissertations, and Problem Reports (ETD)

Underground mines often experience roof falls in entries, crosscuts, and intersections of active mining sections, main travel ways, and belt entries. Roof fall heights greater than 20 ft (6 m) make re-bolting of the newly exposed roof dangerous and impractical. To protect mine personnel, belts, moving vehicles, and other equipment, mine operators typically install steel structures such as square or arch sets in the roof fall areas. Wood lagging is usually installed between the steel-sets to enclose the area and protect the entry from recurring falls. Usually the void space above the steel-sets and wood lagging is backfilled. However, backfilling …

Adaptation Of Coal Mine Floor Rating (Cmfr) To Eastern U.S. Coal Mines, Sena Cicek

Graduate Theses, Dissertations, and Problem Reports (ETD)

Floor heave—the excessive deformation and failure of floor strata—is a serious problem for many underground coal mining operations in the U.S. There is an accepted floor heave design methodology developed for the Illinois basin coal mines (Gadde, 2009). However, for Eastern U.S. coal mines in the Appalachian region, there is not any systematic design method to assess floor heave potential. In order to prevent stability problems associated with floor failure and to ensure the safety of the miners in this region, a systematic and proactive method to assess the potential of floor stability that also takes the floor failure mechanisms …

Fundamental Studies On The Recovery Of Rare Earth Elements From Acid Mine Drainage, Xue Huang

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Rare Earth Elements (REEs) are a group of 17 chemically similar elements that are essential raw materials for modern society. Given their increasing importance in civil and defense applications, many national governments, including the US, have denoted the REEs as critical materials and emphasized the need to identify and develop both conventional and unconventional resources to meet the growing demand. To address this challenge, the US Department of Energy has recently spearheaded efforts to evaluate the technical and economic feasibility of recovering REEs from coal and coal byproducts, which have been shown to contain REEs at an elevated concentration …