Robotics Commons^™

Efficient Data Mining Algorithm Network Intrusion Detection System For Masked Feature Intrusions, Kassahun Admkie, Kassahun Admkie Tekle

African Conference on Information Systems and Technology

Most researches have been conducted to develop models, algorithms and systems to detect intrusions. However, they are not plausible as intruders began to attack systems by masking their features. While researches continued to various techniques to overcome these challenges, little attention was given to use data mining techniques, for development of intrusion detection. Recently there has been much interest in applying data mining to computer network intrusion detection, specifically as intruders began to cheat by masking some detection features to attack systems. This work is an attempt to propose a model that works based on semi-supervised collective classification algorithm. For …

Moving Targets: Addressing Concept Drift In Supervised Models For Hacker Communication Detection, Susan Mckeever, Brian Keegan, Andrei Quieroz

Conference papers

Abstract—In this paper, we are investigating the presence of concept drift in machine learning models for detection of hacker communications posted in social media and hacker forums. The supervised models in this experiment are analysed in terms of performance over time by different sources of data (Surface web and Deep web). Additionally, to simulate real-world situations, these models are evaluated using time-stamped messages from our datasets, posted over time on social media platforms. We have found that models applied to hacker forums (deep web) presents an accuracy deterioration in less than a 1-year period, whereas models applied to Twitter (surface …

Action Recognition Using The Motion Taxonomy, Maxat Alibayev

USF Tampa Graduate Theses and Dissertations

In the last years, modern action recognition frameworks with deep architectures have achieved impressive results on the large-scale activity datasets. All state-of-the-art models share one common attribute: two-stream architectures. One deep model takes RGB frames, while the other model is fed with pre-computed optical flow vectors. The outputs of both models are combined to be used as a final probability distribution for the action classes. When comparing the results of individual models with the fused model, it is common to see that that latter method is more superior. Researchers explain that phenomena with the fact that optical flow vectors serve …

Short Run Box Maker, Jesus Valdez-Ruelas

General Engineering

Small businesses with short run product catalogs have trouble finding the right size box that will work for multiple products. In turn, this leads most businesses to use oversized boxes resulting in unnecessary shipping fees. The objective of this project was to develop and test a cost-effective prototype of a box making machine that could create a short run of custom sized boxes. A Co2 laser was found to be the best option for cutting cardboard and a vertically standing machine was designed to feed the cardboard via rollers. To control cardboard movement stepper motors were used and controlled using …

Robust Drone Landing, Alvin Xuan Quan Chui

Computer Engineering

The growth of drone technology goes with the demands of computer vision. Computer vision provides opportunities for developers to design and create, giving rise to a new innovation. It is also a basis for a full autonomous system when implemented with an intelligent agent. Surveillance drones are installed with cameras, and cameras are the most common approach to computer vision. However, a high-resolution camera with great performance could be expensive, while other low-cost cameras might lack reading accuracy. To improve the performances and maximize a camera’s capability, many different object trackers come into play. This paper will investigate and study …

Rchex: A Radio-Controlled Hexapod, Dominique Sayo

Computer Engineering

rcHex is a radio-controlled hexapod with 18 degrees of freedom, capable of positional and rotational body adjustment as well as omnidirectional travel at variable speeds using three common gaits. Its general-purpose design accessible to hobbyists makes rcHex an platform for further development, whether it be experimentation in advanced robotic movement or retrofitting sensors to utilize technologies such as computer vision and artificial intelligence. This report explores some of the design intricacies of hexapod movement, including gait sequencing and the application of inverse kinematics to multi-jointed limbs.

Surface Autonomous Vehicle For Emergency Rescue, Max Emerick, Ryan Shields, Christopher Feickert, Raymond Impara

Mechanical Engineering

The goal of this document is to clearly define the problem parameters and project objectives and to clearly describe the design process, planned final design, and manufacturing and testing procedures for the senior design project of Team 26: SAVER -- the Surface Autonomous Vehicle for Emergency Rescue. This is both for the purpose of project planning and for clear communication between all parties involved in the project.

The objective of the SAVER project is to develop a proof of concept for an autonomous maritime search and rescue vehicle for aiding in man-overboard missions. To accomplish this goal, a list of …

Autonomous Butter Robot, David Chau, Michael Hegglin

Computer Engineering

Don’t you wish your butter would come to you? Well now it can with the patented Michael and David butter robot! Based on an idea from a TV show, our team set out to see if a similar robot was possible to make in real life. The objective was simple. Can we make a small table sized robot that can bring a person butter using image detection software? With that question in mind we set out buying our components. We wanted to keep it small, so we looked up devices that could do simple image processing and from there we …

Curriculum Development For Robotics Technology Program, Sanjeevi Chitikeshi, Shirshak K. Dhali, Betsey Odell, Vukica Jovanovic, Cheng Y. Lin

Engineering Technology Faculty Publications

With a growing need for a more skilled workforce, providing industry-driven and employment centric training services is an important national priority. Over 3.4 million manufacturing jobs will need to be filled across the United Sates over the next decade. The skills gap is becoming greater based on the statistics provided by the Global Robotics Technology Market: Forecast, 2014-2020 published by Research and Markets, reporting that the worldwide robotics market is forecast to grow from the 2015 level of $26.98B to $82.78B in 2020. This 11 % compounded average growth in the next five years is unprecedented. Given the anticipated growth …

Lawn Buddy, Jayson Johnston, Andrew Brown, Jacob Maljian

Electrical Engineering

Grass lawns are a common hallmark of the American home. In 2019, a survey from the National Association of Landscape Professionals found that 81% of all Americans owned a lawn [1]. Mowing is a time consuming and costly chore that is part of maintaining a grass lawn. The manual labor in mowing a lawn can exceed 40 hours per year [2]. People commonly incur weekly costs on mowing services to save time. Traditional gas powered mowers are physically demanding and use engines that need routine maintenance. They operate loudly enough that users should be wearing hearing protection and the noise …

Reading Robot, Gillian Watts, Andrew Myers, Sabrinna Tan, Taylor Klein, Omeed Djassemi

General Engineering

Presently, there is an insufficient availability of human experts to assist students in reading competency and comprehension. Our team’s goal was to create an improved socially assistive robot for use by therapists, teachers, and parents to help children and adults develop reading skills while they do not have access to specialists. HAPI is a socially assistive robot that we created with the goal of helping students practice their reading comprehension skills. HAPI enables a student to improve their reading skills without an educator present, while enabling educators to review the student's performance remotely. Design constraints included: physical size, weight, duration …

Flexible Fault Tolerance For The Robot Operating System, Sukhman S. Marok

Master's Theses

The introduction of autonomous vehicles has the potential to reduce the number of accidents and save countless lives. These benefits can only be realized if autonomous vehicles can prove to be safer than human drivers. There is a large amount of active research around developing robust algorithms for all parts of the autonomous vehicle stack including sensing, localization, mapping, perception, prediction, planning, and control. Additionally, some of these research projects have involved the use of the Robot Operating System (ROS). However, another key aspect of realizing an autonomous vehicle is a fault-tolerant design that can ensure the safe operation of …

Non-Obstetrical Robotic-Assisted Laparoscopic Surgery In Pregnancy: A Systematic Literature Review., Courtney Capella, Joseph Godovchik, Thenappan Chandrasekar, Huda B. Al-Kouatly

Department of Urology Faculty Papers

Urologic and gynecologic surgeons are the top utilizers of robotic surgery; however, non-obstetrical robotic-assisted laparoscopic surgery (RALS) in pregnant patients is infrequent. A systematic literature review was performed to ascertain the frequency, indication and complications of RALS in pregnancy. Results showed thirty-eight pregnancies from eleven publications between 2008-2020. Five cases were for urologic indication and thirty-three for gynecologic indication. Minimal surgical alterations were required. Although no adverse maternal-fetal outcomes were reported, there are not enough cases published to determine safety. This review demonstrates the feasibility of RALS for the pregnant population in the hands of competent robotic surgeons.

Using Taint Analysis And Reinforcement Learning (Tarl) To Repair Autonomous Robot Software, Damian Lyons, Saba Zahra

Faculty Publications

It is important to be able to establish formal performance bounds for autonomous systems. However, formal verification techniques require a model of the environment in which the system operates; a challenge for autonomous systems, especially those expected to operate over longer timescales. This paper describes work in progress to automate the monitor and repair of ROS-based autonomous robot software written for an a-priori partially known and possibly incorrect environment model. A taint analysis method is used to automatically extract the data-flow sequence from input topic to publish topic, and instrument that code. A unique reinforcement learning approximation of MDP utility …

Using Robotics And Engineering Design Inquiries To Optimize Learning For Middle Level Teachers: A Case Study, Iman Chafik Chahine, Norman Robinson Iii, Kimbeni Mansion

Publications & Research

This exploratory case study reports findings on 20 middle-level science and mathematics teachers’ perceptions of the effectiveness of a one-year project in which teachers engaged in using robotics and engineering design inquiries in their classrooms. Principled by Bandura’s Social Learning Theory (SLT) and using mixed methods approaches, the study measured teachers' efficacy through the Mathematics Teaching Efficacy Belief Instrument (MTEBI) and observation logs before and after the program. The results of this study showed statistically significant differences between PRE MTEBI and POST MTEBI scores. Furthermore, five themes emerged that illuminated potential affordances and constraints that teachers perceive as opportunities and …

Coordinated Autonomy Of Unmanned Aerial Vehicles (Uavs), Paribartan Dhakal

Honors Theses

Unmanned Aerial Vehicles (UAVs) are being extensively used in diverse sectors of the society for various tasks ranging from videography to an extremely sensitive situation such as first responders helping during a disaster. It has been seen that if a fleet of UAVs is deployed, they can perform a task quicker and more efficiently than a single UAV. With an increase in the number of UAVs, a problem arises of handling them with proper control structures. It has been studied that the Behavior Trees (BT) can be a better control architecture to handle the autonomous vehicles, as BTs are more …

Qlime-A Quadratic Local Interpretable Model-Agnostic Explanation Approach, Steven Bramhall, Hayley Horn, Michael Tieu, Nibhrat Lohia

SMU Data Science Review

In this paper, we introduce a proof of concept that addresses the assumption and limitation of linear local boundaries by Local Interpretable Model-Agnostic Explanations (LIME), a popular technique used to add interpretability and explainability to black box models. LIME is a versatile explainer capable of handling different types of data and models. At the local level, LIME creates a linear relationship for a given prediction through generated sample points to present feature importance. We redefine the linear relationships presented by LIME as quadratic relationships and expand its flexibility in non-linear cases and improve the accuracy of feature interpretations. We coin …

Vex U Robotics, Kyle Lutterman, Jeffrey Ryan, Sierra Wong, Elizabeth Geiger

Discovery Day - Prescott

VEX U is a competition hosted by the REC Foundation for university students to get engaged in hands-on engineering. Each team produces two robots using the VEX provided parts to compete in the VEX U competition. The competition changes every year with the only constants being the size of the field, the tools and parts teams are able to use, and the size constraints of the robots. The teams compete in regional competitions in order to qualify for the World Championship Competition, which is the highest competition a team can compete in for VEX U. The VEX U teams at …

Tech Comm Eagle Eye-Tracking Control System, Gabiella Lail, Robert Shaw, Hunter Smatla, Matthew Gary

Discovery Day - Prescott

Mobile eye-tracking systems provide usability research support as well as access to a wide range of robotics and technical communication research opportunities. Optical tracking systems are often prohibitively expensive and do not provide the mobility or flexibility needed for a variety of research application possibilities. Our team proposes building a simple mobile eye-tracking system to be used in-house at ERAU for heat-mapping, robotics, control systems, and various technical communication applications in a structured research environment. The mobile eyetracking system will become part of a larger research and hands-on technical communication usability lab and research center. The research team intends to …

Drone Proximity Detection Via Air Disturbance Analysis, Qian Zhao, Jason Hughes

Faculty Publications

The use of unmanned aerial vehicles (drones) is expanding to commercial, scientific, and agriculture applications, including surveillance, product deliveries and aerial photography. One challenge for applications of drones is detecting obstacles and avoiding collisions. A typical solution to this issue is the use of camera sensors or ultrasonic sensors for obstacle detection or sometimes just manual control (teleoperation). However, these solutions have costs in battery lifetime, payload, operator skill. We note that there will be an air disturbance in the vicinity of the drone when it’s moving close to obstacles or other drones. Our objective is to detect obstacles from …