Computer Engineering Commons^™

Current-Based Fault Detection For Wind Turbine Systems Via Hilbert-Huang Transform, Dingguo Lu, Wei Qiao, Xiang Gong, Liyan Qu

Department of Electrical and Computer Engineering: Faculty Publications

Mechanical failures of wind turbines represent a significant cost in both repairs and downtime. Detecting incipient faults of wind turbine components permits maintenance to be scheduled and failed parts to be repaired or replaced before causing failures of other components or catastrophic failure of the system. This paper proposes a Hilbert-Huang transform (HHT)-based algorithm to effectively extract fault signatures in generator current signals for wind turbine fault diagnosis by using the HHT’s capability of accurately representing the instantaneous amplitude and frequency of nonlinear and nonstationary signals. A phase-lock-loop (PLL) method is integrated to estimate wind turbine rotating speed, which is …

Low-Power Analog Processing For Sensing Applications: Low-Frequency Harmonic Signal Classification, Daniel J. White, Peter E. Williams, Michael W. Hoffman, Sina Balkir

Department of Electrical and Computer Engineering: Faculty Publications

A low-power analog sensor front-end is described that reduces the energy required to extract environmental sensing spectral features without using Fast Fourier Transform (FFT) or wavelet transforms. An Analog Harmonic Transform (AHT) allows selection of only the features needed by the back-end, in contrast to the FFT, where all coefficients must be calculated simultaneously. We also show that the FFT coefficients can be easily calculated from the AHT results by a simple back-substitution. The scheme is tailored for low-power, parallel analog implementation in an integrated circuit (IC). Two different applications are tested with an ideal front-end model and compared to …

Fiber-Optic Refractometer Based On An Etched High-Q Π-Phase-Shifted Fiber-Bragg-Grating, Qi Zhang, Natale J. Ianno, Ming Han

Department of Electrical and Computer Engineering: Faculty Publications

We present a compact and highly-sensitive fiber-optic refractometer based on a high-Q π-phase-shifted fiber-Bragg-grating (πFBG) that is chemically etched to the core of the fiber. Due to the π phase-shift, a strong πFBG forms a high-Q optical resonator and the reflection spectrum features an extremely narrow notch that can be used for highly sensitivity refractive index measurement. The etched πFBG demonstrated here has a diameter of ~9.3 μm and a length of only 7 mm, leading to a refractive index responsivity of 2.9 nm/RIU (RIU: refractive index unit) at an ambient refractive index of 1.318. The reflection spectrum of the …

Optimal Receiver Antenna Location In Indoor Environment Using Dynamic Differential Evolution And Genetic Algorithm, Shu-Han Liao, Chien-Hung Chen, Chien-Ching Chiu, Min-Hui Ho, Tadeusz A. Wysocki, Beata J. Wysocki

Department of Electrical and Computer Engineering: Faculty Publications

Using the impulse responses of these multipath channels, the bit error rate (BER) performance for binary pulse amplitude modulation impulse radio ultra-wideband communication system is calculated. The optimization location of receiving antenna is investigated by dynamic differential evolution (DDE) and genetic algorithm (GA) to minimize the outage probability. Numerical results show that the performance for reducing BER and outage probability by DDE algorithm is better than that by GA.

Terahertz Antenna Phase Shifters Using Integrally-Gated Graphene Transmission-Lines, Pai-Yen Chen, Christos Argyropoulos, Andrea Alu

Department of Electrical and Computer Engineering: Faculty Publications

We propose the concept and design of terahertz (THz) phase shifters for phased antenna arrays based on integrally- gated graphene parallel-plate waveguides (GPPWGs). We show that an active transmission-line may be realized by combining GPPWGs with double-gate electrodes, in which the applied gate voltage can control the guiding properties of the gated sections. This may enable the realization of THz electronic switches and tunable loaded-lines for sub mm-wave antenna systems. Based on these active components, we theoretically and numerically demonstrate several digital and analog phase shifter designs for THz frequencies, with a wide range of phase shifts and small return …

Testing Robustness Of Relative Complexity Measure Method Constructing Robust Phylogenetic Trees For Galanthus L. Using The Relative Complexity Measure, Yasin Bakis, Hasan H. Otu, Nivart Tasci, Cem Meydan, Nese Bilgin, Sirri Yuzbasioglu, O Ugur Sezerman

Department of Electrical and Computer Engineering: Faculty Publications

Background: Most phylogeny analysis methods based on molecular sequences use multiple alignment where the quality of the alignment, which is dependent on the alignment parameters, determines the accuracy of the resulting trees. Different parameter combinations chosen for the multiple alignment may result in different phylogenies. A new non-alignment based approach, Relative Complexity Measure (RCM), has been introduced to tackle this problem and proven to work in fungi and mitochondrial DNA.

Result: In this work, we present an application of the RCM method to reconstruct robust phylogenetic trees using sequence data for genus Galanthus obtained from different regions in Turkey. Phylogenies …

Transparent, Flexible, And Solid-State Supercapacitors Based On Graphene Electrodes, Y. Gao, Y. S. Zhou, W. Xiong, L. J. Jiang, M. Mahjouri-Samani, P. Thirugnanam, X. Huang, M. M. Wang, L. Jiang, Y. F. Lu

Department of Electrical and Computer Engineering: Faculty Publications

In this study, graphene-based supercapacitors with optical transparency and mechanical flexibility have been achieved using a combination of poly(vinyl alcohol)/ phosphoric acid gel electrolyte and graphene electrodes.An optical transmittance of ∼67% in a wavelength range of 500-800 nm and a 92.4% remnant capacitance under a bending angle of 80◦ have been achieved for the supercapacitors. The decrease in capacitance under bending is ascribed to the buckling of the graphene electrode in compression. The supercapacitors with high optical transparency, electrochemical stability, and mechanical flexibility hold promises for transparent and flexible electronics.

Mass Sensor, Mathias M. Schubert, Eva Schubert, Tino Hofmann, Daniel Schmidt

Department of Electrical and Computer Engineering: Faculty Publications

A mass sensor is provided for determining the mass of small objects. The mass sensor has a plurality of nanostructures attached to a substrate. The nanostructures and the substrate are irradiated with an electromagnetic wave to determine a first mechanical-electromagnetic wave to determine a first mechanical-electromagnetic resonant frequency of the mass sensor. After a particle is attached to the nanostructures, the substrate and the nanostructures to which the particle is attached are irradiated with an electromagnetic wave to determine a second mechanical electromagnetic resonant frequency of the mass sensor. A mass of the particle is determined based on a difference …

Terahertz Resonator, Eva Schubert, Mathias M. Schubert, Tino Hofmann

Department of Electrical and Computer Engineering: Faculty Publications

A tunable terahertz resonator includes a semiconductor Substrate and a metal layer contacting a surface of the semiconductor substrate. A depletion layer is formed in the semiconductor substrate near an interface between the metal layer and the semiconductor Substrate. A chiral nanostructure is coupled to the substrate or the metal layer, the chiral nanostructure including a conducting or semiconducting material and having an inductance. A bias circuit applies a bias Voltage across the metal layer and the semiconductor Substrate to control a capacitance of a tunable capacitor that includes the depletion layer. The chiral nanostructure and the tunable capacitor form …

A Single-Switch Lcl-Resonant Isolated Dc-Dc Converter, Jianwu Zeng, Wei Qiao, Liyan Qu

Department of Electrical and Computer Engineering: Faculty Publications

Isolated converters are desirable in the DC-DC power conversion applications where isolation and/or a large voltage step-up gain is needed. Traditional isolated DC-DC converters either utilize many switches to achieve high efficiency or use few switches which result in low efficiency. This paper proposes a new single-switch isolated DC-DC converter with a LCL-resonant circuit. The proposed isolated DC-DC converter has the advantages of not only using the least number of (i.e., one) switch, but also achieving zero-current switching (ZCS) and zero-voltage switching (ZVS) when the switch is turned on and off, respectively. Experimental results are provided to validate the theoretical …

An Isolated Three-Port Bidirectional Dc-Dc Converter For Photovoltaic Systems With Energy Storage, Jianwu Zeng, Wei Qiao, Liyan Qu

Department of Electrical and Computer Engineering: Faculty Publications

This paper proposes a new isolated, three-port, bidirectional, DC-DC converter for simultaneous power management of multiple energy sources. The proposed converter has the advantage of using the least number of switches and soft switching of the main switch, which is realized by using a LCL-resonant circuit. The converter is capable of interfacing sources of different voltage-current characteristics with an isolated load. In this paper, one photovoltaic (PV) panel, one rechargeable battery, and an isolated load are interfaced by the proposed converter. Simulation and experimental results show that the proposed converter is capable of maximum power point tracking control for the …

An Adaptive Quasi-Sliding-Mode Rotor Position Observer-Based Sensorless Control For Interior Permanent Magnet Synchronous Machines, Yue Zhao, Wei Qiao, Long Wu

Department of Electrical and Computer Engineering: Faculty Publications

Advantages such as parameter insensitivity and high robustness to system structure uncertainty make the sliding-mode observer (SMO) a promising solution for sensorless control of interior permanentmagnet synchronousmachines (IPMSMs). In practical industry applications, in order to utilize digital controllers and achieve comparable performance under a lower sampling frequency, a discrete-time or quasi-SMO (QSMO) is commonly used. However, because of the saliency of an IPMSM, the magnitude of the extended electromotive force (EMF) will change with load (torque and/or speed) variations, whichmakes it challenging for the QSMO to estimate the extended EMF accurately. Without proper observer parameters, a phase shift will be …

An Extended Flux Model-Based Rotor Position Estimator For Sensorless Control Of Interior Permanent Magnet Synchronous Machines, Yue Zhao, Zhe Zhang, Wei Qiao, Long Wu

Department of Electrical and Computer Engineering: Faculty Publications

Starting from the classical dynamic model of interior permanent magnet synchronous machines (IPMSMs) expressed in the stationary reference frame, this paper presents a mathematical model reconstruction process for IPMSMs, from which an extended flux-based IPMSM model is derived. Compared with the commonly used extended electromotive force-based model, the extended flux-based model has notable advantages of simpler model structure and less sensitive to machine parameter and speed variations. An extended flux model-based position estimator is then proposed for sensorless control of an IPMSM by utilizing a sliding-mode observer with a dynamic position compensator. The latter improves the dynamic performance and low-speed …

Sensorless Control Of Surface-Mounted Permanent-Magnet Synchronous Machines For Low-Speed Operation Based On High-Frequency Square-Wave Voltage Injection, Yue Zhao, Zhe Zhang, Cong Ma, Wei Qiao, Liyan Qu

Department of Electrical and Computer Engineering: Faculty Publications

This paper proposes a high-frequency signal injection-based position estimation scheme for surface-mounted permanent-magnet synchronous machines (SPMSM) operating in the low-speed range. A square-wave voltage vector is injected in the estimated rotating reference frame. The rotor position information is then extracted from the envelopes of the resulting induced high-frequency currents in the stationary reference frame. The proposed position estimation method has almost no dependence on machine asymmetric properties and, therefore, is well suited for SPMSM applications. Simulation results are provided to verify the effectiveness of the proposed method from 1 Hz to 50 Hz electric fundamental frequency under all load conditions. …

Directed Test Suite Augmentation, Zhihong Xu

School of Computing: Dissertations, Theses, and Student Research

Test suite augmentation techniques are used in regression testing to identify code elements affected by changes and to generate test cases to cover those elements. Whereas methods and techniques to find affected elements have been extensively researched in regression testing, the problem of generating new test cases to cover these elements cost-effectively has rarely been studied. We believe that reusing existing test cases will help us achieve this task. This research develops test suite augmentation techniques that reuse existing test cases to automatically generate new test cases to cost-effectively cover affected elements. We begin by using two dynamic test case …

Nonlinear Control For Dual Quaternion Systems, William D. Price

Doctoral Dissertations and Master's Theses

The motion of rigid bodies includes three degrees of freedom (DOF) for rotation, generally referred to as roll, pitch and yaw, and 3 DOF for translation, generally described as motion along the x, y and z axis, for a total of 6 DOF. Many complex mechanical systems exhibit this type of motion, with constraints, such as complex humanoid robotic systems, multiple ground vehicles, unmanned aerial vehicles (UAVs), multiple spacecraft vehicles, and even quantum mechanical systems. These motions historically have been analyzed independently, with separate control algorithms being developed for rotation and translation. The goal of this research is to study …

Dynamics And Control Of Higher-Order Nonholonomic Systems, Jaime Rubio HerváS

Doctoral Dissertations and Master's Theses

A theoretical framework is established for the control of higher-order nonholonomic systems, defined as systems that satisfy higher-order nonintegrable constraints. A model for such systems is developed in terms of differential-algebraic equations defined on a higher-order tangent bundle. A number of control-theoretic properties such as nonintegrability, controllability, and stabilizability are presented. Higher-order nonholonomic systems are shown to be strongly accessible and, under certain conditions, small time locally controllable at any equilibrium. There are important examples of higher-order nonholonomic systems that are asymptotically stabilizable via smooth feedback, including space vehicles with multiple slosh modes and Prismatic-Prismatic-Revolute (PPR) robots moving open liquid …

Evaluating And Training Intraoperative Analysis Of The Mitral Valve, Neil A. Tenenholtz

Link Foundation Modeling, Simulation and Training Fellowship Reports

Mitral valve repair is the recommended method of treating valve incompetency. However, the procedure is quite difficult and, as a result, underperformed due to surgeon’s need to predict the closed valve shape of the patient’s arrested heart. While the interactive process of predicting closed valve shape is achieved by physically manipulating valve tissue (known as valve analysis), surgical training consists of traditional, non-interactive pedagogy (e.g., book-based learning and lectures) followed by an apprenticeship model where the trainee is gradually given hands-on experience, resulting in post-medical school training that is often 10 years or greater. The continuing education of practicing cardiac …

The Effect Overall Density Plays On Performance And Preference In A Windowed Environment, Lucas M. Downard

UNF Graduate Theses and Dissertations

This thesis consists of fundamental research into the effect that a display’s overall density has on a user’s performance and preference while performing simple tasks using a window-styled computer application specifically developed for this study. This study sought to reevaluate previous findings by exploring their application in the more current, present-day environment. In this research, overall density was considered to be a measure of a screen’s complexity and was examined at three different levels. Users performed a series of tasks using only one of three available screens with different density levels. The same tasks were performed by all users to …

Performance Evaluation Of Data Intensive Computing In The Cloud, Bhagavathi Kaza

UNF Graduate Theses and Dissertations

Big data is a topic of active research in the cloud community. With increasing demand for data storage in the cloud, study of data-intensive applications is becoming a primary focus. Data-intensive applications involve high CPU usage for processing large volumes of data on the scale of terabytes or petabytes. While some research exists for the performance effect of data intensive applications in the cloud, none of the research compares the Amazon Elastic Compute Cloud (Amazon EC2) and Google Compute Engine (GCE) clouds using multiple benchmarks. This study performs extensive research on the Amazon EC2 and GCE clouds using the TeraSort, …