Model-Based Test Case Prioritization Using Cluster Analysis: A Soft-Computing Approach,
2015
TÜBİTAK
Model-Based Test Case Prioritization Using Cluster Analysis: A Soft-Computing Approach, Ni̇da Gökçe, Fevzi̇ Belli̇, Mübari̇z Emi̇nli̇, Beki̇r Taner Di̇nçer
Turkish Journal of Electrical Engineering and Computer Sciences
Model-based testing is related to the particular relevant features of the software under test (SUT) and its environment. Real-life systems often require a large number of tests, which cannot exhaustively be run due to time and cost constraints. Thus, it is necessary to prioritize the test cases in accordance with their importance as the tester perceives it, usually given by several attributes of relevant events entailed. Based on event-oriented graph models, this paper proposes an approach to ranking test cases in accordance with their preference degrees. For forming preference groups, events are clustered using an unsupervised neural network and fuzzy …
Predictive Control Of A Constrained Pressure And Level System,
2015
TÜBİTAK
Predictive Control Of A Constrained Pressure And Level System, Erkan Kaplanoğlu, Taner Arsan, Hüseyi̇n Selçuk Varol
Turkish Journal of Electrical Engineering and Computer Sciences
The focus of this paper is the implementation of a constrained predictive control algorithm implemented in Multi-Parametric Toolbox (MPT), which is a free MATLAB toolbox for design, analysis, and implementation of controllers for constrained linear, nonlinear, and hybrid systems. In general, MPT is used for modeling systems offline. The novelty of this study is that real-time mode MPT is used in process control. We also combined the Model Predictive Control Toolbox with MPT. This novel controller is considered a real-time controller of level-pressure systems. In this study, a special type of model predictive control algorithm, the constrained continuous-time generalized control, …
A New Hysteresis Band Current Control Technique For A Shunt Active Filter,
2015
TÜBİTAK
A New Hysteresis Band Current Control Technique For A Shunt Active Filter, Murat Kale, Engi̇n Özdemi̇r
Turkish Journal of Electrical Engineering and Computer Sciences
This paper proposes a hysteresis band (HB) current control technique to reduce the power losses in a shunt active filter. During a switching period in the zero-crossing region, the inverter output current flows through a transistor. By changing the direction, it flows through the free-wheeling diode of the same switch in an inverter leg, or vice versa. The shunt active filter current typically has 6 zero-crossing regions during a fundamental frequency cycle. This paper presents a HB current control technique where there is not any switching in these 6 zero-crossing regions per period, which results in reducing the power losses. …
Approximations Of Higher-Order Fractional Differentiators And Integrators Using Indirect Discretization,
2015
TÜBİTAK
Approximations Of Higher-Order Fractional Differentiators And Integrators Using Indirect Discretization, Richa Yadav, Maneesha Gupta
Turkish Journal of Electrical Engineering and Computer Sciences
This paper describes new approximations of fractional order integrators (FOIs) and fractional order differentiators (FODs) by using a continued fraction expansion-based indirect discretization scheme. Different tenth-order fractional blocks have been derived by applying three different s-to-z transforms described earlier by Al-Alaoui, namely new two-segment, four-segment, and new optimized four-segment operators. A new addition has been done in the new optimized four-segment operator by modifying it by the zero reflection method. All proposed half (s$^{\pm 1/2})$ and one-fourth (s$^{\pm 1/4})$ differentiator and integrator models fulfill the stability criterion. The tenth-order fractional differ-integrators (s$^{\pm \alpha })$ based on the modified new optimized …
Using The Finite Element Method To Calculate Parameters For A Detailed Model Of Transformer Winding For Partial Discharge Research, Seyed Mohammad Hassan Hosseini, Seyed Mohsen Enjavi Madar, Mehdi Vakilian
Turkish Journal of Electrical Engineering and Computer Sciences
Power transformers are considered to be one of the most essential and costly pieces of equipment in a power system. Identifying insulation faults in the shortest possible time prevents the occurrence of irreparable damage. Partial discharge (PD) is one of the most significant insulation faults. The first step in the study of PD is the precise modeling of transformer winding at high frequencies. In this paper, the finite element method is used to calculate the parameters for a detailed model of transformer winding. For this reason, a detailed model of transformer winding and the analytic formulations are first presented for …
Mechanical Fault Detection In Permanent Magnet Synchronous Motors Using Equal Width Discretization-Based Probability Distribution And A Neural Network Model, Mehmet Akar, Mahmut Heki̇m, Umut Orhan
Turkish Journal of Electrical Engineering and Computer Sciences
This paper focuses on detecting the static eccentricity and bearing faults of a permanent magnet synchronous motor (PMSM) using probability distributions based on equal width discretization (EWD) and a multilayer perceptron neural network (MLPNN) model. In order to achieve this, the PMSM stator current values were measured in the cases of healthy, static eccentricity, and bearing faults for the conditions of three speeds and five loads. The data was discretized into several ranges through the EWD method, the probability distributions were computed according to the number of current values belonging to each range, and these distributions were then used as …
Estimating Facial Angles Using Radon Transform,
2015
TÜBİTAK
Estimating Facial Angles Using Radon Transform, Mohamad Amin Bakhshali, Mousa Shamsi
Turkish Journal of Electrical Engineering and Computer Sciences
Analysis of human facial images has become increasingly important due to its numerous applications. In this regard, extracting facial parameters is vital and various studies have been done in this field. Using these methods, different facial parameters such as the location of eyebrows, eye length, and nose angles are extracted. In this article, a robust and automatic method is introduced for determining facial angles from profile view images using the Radon transform. The Radon transform is a type of linear integration along a specific direction and angles play an important role in its performance. The proposed algorithm not only has …
Active And Reactive Power Transmission Loss Allocation To Bilateral Contracts Through Game Theory Techniques,
2015
TÜBİTAK
Active And Reactive Power Transmission Loss Allocation To Bilateral Contracts Through Game Theory Techniques, Hamed Nafisi, Hossein Mahdinia Roudsari, Seyed Hossein Hosseinian, Hossein Askarian Abyaneh, Vahid Rasouli Disfani
Turkish Journal of Electrical Engineering and Computer Sciences
Transmission loss has a considerable effect in overall power generation. For fairly distributing the charge of losses to generators and consumers in a deregulated power system, the allocation of this loss is very important. Game-theoretic methods seem fairer for share determination of each participant of a coalition with no discrimination. In this paper, the active and reactive power transmission losses are allocated to bilateral transactions simultaneously through load flow calculations and cooperative game theory solutions. The loss allocation problem and each bilateral transaction are treated as a game and a player of the game, correspondingly. Two game theory-based approaches, the …
Energy Management Of Solar Car In Circuit Race,
2015
TÜBİTAK
Energy Management Of Solar Car In Circuit Race, Erkan Atmaca
Turkish Journal of Electrical Engineering and Computer Sciences
This study develops an optimal driving strategy for solar car on a track with nonzero gradients and sharp corners. This strategy consists of finding the racing line and the speed profile that minimizes the lap time with a given amount of energy. The problem is formulated in proper form for a commercial nonlinear optimization software program. The track is modeled into segments identified by their spatial coordinates on its own surface. The speed-distance behavior of the vehicle is linearized at each segment. The constraints set by the brushless DC motor, battery, and circuit are formulated accordingly. This is the motor …
Decode-And-Forward Relaying Based On Orthogonal Complementary Codes,
2015
TÜBİTAK
Decode-And-Forward Relaying Based On Orthogonal Complementary Codes, Refi̇k Çağlar Kizilirmak
Turkish Journal of Electrical Engineering and Computer Sciences
In this note, we propose a full-duplex decode-and-forward cooperative diversity scheme based on code division with orthogonal complementary codes. We consider a simple case in which a single user is assisted by a single relay to achieve cooperative diversity. When the cooperation is full-duplex, the operational delay of the relay makes the channel asynchronous and this may cause multiple-access interference (MAI) between the user and relay. The orthogonal complementary codes have perfect autocorrelation and cross-correlation properties that provide MAI-free operation in asynchronous channels. In the proposed scheme, the user and relay terminals spread their messages with complementary codes and the …
Solution Of Tio$_{2}$ Memristor-Capacitor Series Circuit Excited By A Constant Voltage Source And Its Application To Calculate Operation Frequency Of A Programmable Tio$_{2}$ Memristor-Capacitor Relaxation Oscillator, Reşat Mutlu
Turkish Journal of Electrical Engineering and Computer Sciences
The memristor is a new-found circuit element and its applications in programmable circuits are also under study. Analysis of most of its combinations with other circuit elements such as resistors, capacitors, and inductors does not exist. In this work, a TiO$_{2}$ memristor model with linear dopant drift speed is used and the solution of a TiO$_{2}$ memristor and capacitor series circuit driven by a constant voltage source is given. It is then used to analyze a novel M-C oscillator circuit. In previous programmable oscillator studies, the memristance of the oscillator was assumed to be constant. However, in this study, the …
Semiconductor Laser Beam Bending,
2015
TÜBİTAK
Semiconductor Laser Beam Bending, Remzi̇ Yildirim, Fati̇h Vehbi̇ Çelebi̇
Turkish Journal of Electrical Engineering and Computer Sciences
This study is about a single-component cylindrical structured lens with a gradient curve that was used for bending laser beams. It operates under atmospheric conditions and bends the laser beam independently of temperature, pressure, polarity, polarization, magnetic field, electric field, radioactivity, and gravity. A single-piece cylindrical lens that can bend laser beams was developed. Lenses are made of transparent, tinted, or colored glass and are used to undermine or absorb the energy of laser beams. This study is not a work of a plasma filamentation, nor is related to a self-accelerating wave packet. Rather, it focuses on bending the laser …
Automatic Classification Of Harmonic Data Using $K$-Means And Least Square Support Vector Machine,
2015
TÜBİTAK
Automatic Classification Of Harmonic Data Using $K$-Means And Least Square Support Vector Machine, Hüseyi̇n Eri̇şti̇, Vedat Tümen, Özal Yildirim, Belkis Eri̇şti̇, Yakup Demi̇r
Turkish Journal of Electrical Engineering and Computer Sciences
In this paper, an effective classification approach to classify harmonic data has been proposed. In the proposed classifier approach, harmonic data obtained through a 3-phase system have been classified by using $k$-means and least square support vector machine (LS-SVM) models. In order to obtain class details regarding harmonic data, a $k$-means clustering algorithm has been applied to these data first. The training of the LS-SVM model has been realized with the class details obtained through the $k$-means algorithm. To increase the efficiency of the LS-SVM model, the regularization and kernel parameters of this model have been determined with a grid …
Prescient: A Predictive Channel Access Schemefor Ieee 802.15.4-Compliant Devices Considering Ieee 802.11 Coexistence,
2015
TÜBİTAK
Prescient: A Predictive Channel Access Schemefor Ieee 802.15.4-Compliant Devices Considering Ieee 802.11 Coexistence, Tolga Çöplü, Sema Fatma Oktuğ
Turkish Journal of Electrical Engineering and Computer Sciences
Coexistence is among the most significant challenges for IEEE 802.15.4-compliant devices in indoor environments. Previous works have shown that IEEE 802.11-compliant devices are the major sources of interference in the 2.4 GHz industrial, scientific, and medical band. In order to overcome the coexistence problem, IEEE 802.15.4-compliant devices should monitor the communication channel and access the channel when it is not in use. In this study, the impact of IEEE 802.11 traffic on IEEE 802.15.4 communication is analyzed and a novel predictive channel access scheme, PRESCIENT (PREdictive channel access SCheme for IEee 802.15.4-compliaNT devices), is proposed. The performance evaluation of the …
Dielectric Loaded Tem Horn-Fed Ridged Horn Antenna Designfor Ultrawideband Ground-Penetrating Impulse Radar,
2015
TÜBİTAK
Dielectric Loaded Tem Horn-Fed Ridged Horn Antenna Designfor Ultrawideband Ground-Penetrating Impulse Radar, Ahmet Serdar Türk, Ahmet Kenan Keski̇n, Mustafa Dağcan Şentürk
Turkish Journal of Electrical Engineering and Computer Sciences
A modified double-ridged horn structure is proposed to obtain ultrawideband antenna characteristics over a bandwidth ratio of greater than 40:1 for impulse radar systems. The Vivaldi-shaped TEM horn feeder has been designed to extend the lower cut-off frequency and the partial dielectric loading technique using a small lens inward while the aperture has been implemented to enhance the gain of the standard double-ridged horn antenna without changing the physical dimensions. The starting frequency of the antenna operation band is lowered from 800 MHz to 400 MHz. Moreover, approximately 5 dB gain increment level is achieved from 4 to 10 GHz. …
An Implementable Approach In Order To Model A Nonideal Incremental Encoder In Speed Measurement Studies,
2015
TÜBİTAK
An Implementable Approach In Order To Model A Nonideal Incremental Encoder In Speed Measurement Studies, Mahdi Maaref, Alireza Rezazadeh
Turkish Journal of Electrical Engineering and Computer Sciences
Incremental encoders have attracted significant attention to measure motor speed worldwide. Due to the advantages of incremental encoders a noticeable percentage of Servo system drives have been built based on these sensors. The nonideality of encoders, especially mechanical misalignments, is one of their most important problems, affecting the precision of calculations. In the current paper we present an analytical formula to model the nonideal incremental encoder and calculate both the frequency and magnitude of vibrations due to this nonideality. Moreover, a nonideality identity parameter of the encoder is defined. This parameter can be used for quality assurance purposes. Moreover, it …
A New High-Performance Current-Mode Fuzzy Membership Function Circuit And Its Application,
2015
TÜBİTAK
A New High-Performance Current-Mode Fuzzy Membership Function Circuit And Its Application, Turgay Temel
Turkish Journal of Electrical Engineering and Computer Sciences
A new current-mode fuzzy-membership function circuit is proposed. The circuit has a very compact and simple architecture based on the simultaneous use of winner- and loser-take-all topologies. The circuit has also the advantage of easily adjusting generated membership function characteristics such as center or mean and width with a straightforward application of respective input currents. It is shown that the new circuit outperforms previous counterparts in terms of speed, power consumption, layout area, and robustness to variations in design parameters and errors. As an application, a fuzzy-classifier is designed with a new membership circuit as a seven fuzzy level controller.
Fuzzy Sliding Mode Control Applied To A Doubly Fed Induction Generator For Wind Turbines,
2015
TÜBİTAK
Fuzzy Sliding Mode Control Applied To A Doubly Fed Induction Generator For Wind Turbines, Sid Ahmed El Mehdi Ardjoun, Mohamed Abid
Turkish Journal of Electrical Engineering and Computer Sciences
In this paper an indirect vector control using fuzzy sliding mode control is proposed for a double-fed induction generator (DFIG), applied for a wind energy conversion system in variable speed. The objective is to independently control the active and reactive power generated by the DFIG, which is decoupled by the orientation of the flux. The sliding mode control finds its strongest justification for the problem concerning the use of a robust nonlinear control law for the model uncertainties. As far as the fuzzy mode control is concerned, it aims at reducing the chattering effect. The obtained results show the increasing …
Model-Reference Sliding Mode Control Of A Three-Phase Four-Leg Voltage Source Inverter For Stand-Alone Distributed Generation Systems, Ayhan Özdemi̇r, İrfan Yazici, Zeki̇ye Erdem
Turkish Journal of Electrical Engineering and Computer Sciences
This paper proposes a discrete-time model-reference sliding mode control of three-phase four-leg voltage source inverters for stand-alone distributed generation systems. Three-phase four-leg voltage source inverters (VSIs) are used in a broad area. A discrete-time model-reference sliding mode controller, having superior advantages such as insensitivity to external disturbances, system parameter variations, and modeling errors, is applied to control the output voltage of three-phase four-leg VSIs. As a new study, the discrete-time model-reference sliding mode control with a supplemented output feedback integral controller is proposed so that the controlled output voltages of the VSI tracks the input reference signal. The controller is …
Performance Analysis Of A 500-Kwp Grid-Connected Solar Photovoltaic Power Plant In Kahramanmaraş,
2015
TÜBİTAK
Performance Analysis Of A 500-Kwp Grid-Connected Solar Photovoltaic Power Plant In Kahramanmaraş, Şaban Yilmaz, Hasan Riza Özçalik
Turkish Journal of Electrical Engineering and Computer Sciences
In today's world, the daily need for and cost of energy sources increase and this forces industrial institutions to seek for new ways to generate their own energy. The developments in photovoltaic systems have recently drawn attention in the business world. Although their installation costs are high, they are environmentally friendly and profitable investments in the long run. The cost analysis of a large-scale photovoltaic generator in the climatic conditions of Kahramanmara\c{s} will lead the way to new investments. In this study, the modeling and cost analysis of an on-grid photovoltaic generator of 500 kW, which was installed to provide …
