Computer Engineering Commons^™

Forumsphere.Com, Nicholas Scott Gatehouse, Sam Robert Rastovich

Computer Science and Software Engineering

We live in the Age of Information & Technology where social media has become an integral part of our society. Social media platforms such as Facebook help bring people and ideas together in one place. However, currently there is no centralized hub on the internet that is geared towards individual college campuses. Our goal is to create an environment that promotes structured and productive discussion between students, alumni, and staff. A platform like ours is needed to bring a campus closer if the community is willing and able to help one another.

There are other platforms that focus on social …

Roborodentia Robot: Treadbot, Stephen C. Schmidt

Computer Science and Software Engineering

This document is a summary of my contest entry to the 2018 Cal Poly Roborodentia competition. It is meant to be a process overview and design outline of the mechanical, electrical, and software components of my robot.

Dynamic Routing And Network Monitoring For The Polywog Protocol, Ryan Lawrence, Josh Pfeffer

Computer Science and Software Engineering

This document analyzes the implementation of dynamic routing for router nodes in a mesh network. It examines the algorithm used to populate both the minimum-distance and the routing tables. Furthermore, it describes the node configurations used for testing and applications for mesh networks.

Additionally, this document describes the implementation and testing of network monitoring in a mesh network. It discusses the steps used to forward active nodes in the network between router nodes, a gateway node, and a network monitor.

Lastly, this paper details our future plans for implementing additional features for a network monitor.

Extension Of Cpe 454 Operating System, Joseph Nathaniel Arhar

Computer Science and Software Engineering

This project extended on the operating system I wrote in CPE 454 by adding additional features on top of the existing implementation. In order to implement them, I researched operating system design patterns and hardware details. I used wiki.osdev.org for most research, just like I did in CPE 454. The source code for the project is at https://github.com/josepharhar/jos.

Pressure Ulcer Prevention System, Rey-David Palomares, Ojus Rao

Interdisciplinary Design Senior Theses

Pressure ulcers, also known as bedsores, are a widespread but often understated problem. A pressure ulcer is an injury that develops with constant pressure on an area of skin for a long time. They range from bruises to open wounds to even exposed bone. These injuries especially impact bedridden and elderly hospital inpatients, since these people must depend on nursing staff for mobility.

Pressure ulcers can seem to be a solved problem. Solutions that completely eliminate pressure ulcers do exist. These solutions, however, are too expensive for widespread use, at thousands of dollars per bed. Other solutions, such as relying …

Book-Hunt! Android Mobile Application Using Indoor Positioning Technology, Sneha Pantam

Electronic Theses, Projects, and Dissertations

Indoor Positioning System (IPS) focuses on locating objects inside

Buildings. Till date, GPS has helped us obtain accurate locations outdoors. These locations have helped us in many ways like navigating to a destination point, tracking people etc. Indoor Positioning System aims at navigating and tracking objects inside buildings. [1] IndoorAtlas is a technology that works on the theory of Indoor Positioning System. Book-Hunt is an Android mobile application which majorly makes use of IndoorAtlas therefore making use of the technique of indoor tracking. This Android mobile application is designed for Libraries. It is designed specifically for John M. Pfau Library, …

Dynamic Model For Simulating Motion Of The Right Ventricle, Brian Michael Larsen, Sam Koopman Porter, John Francis D'Ambrosio

Mechanical Engineering

This report documents all the research, ideation, and mockups used to determine right ventricle motion and develop a system capable of reproducing that motion on a tissue sample. The model is intended for evaluating anchoring systems being developed by Edwards Lifesciences for use with tricuspid valve therapies. Several design solutions were considered for the primary functions of recreating motion of the right ventricle and attaching tissue to the device. From these ideas a primary means of producing motion and attaching tissue was selected. These ideas were then developed over the course of a school year to become the final system …

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …

Developing, Evaluating, And Demonstrating An Open Source Gateway And Mobile Application For The Smartfarm Decision Support System, Caleb D. Fink

Master's Theses

The purpose of this research is to design, develop, evaluate, and demonstrate an open source gateway and mobile application for the SmartFarm open source decision support system to improve agricultural stewardship, environmental conservation, and provide farmers with a system that they own. There are very limited options for an open source gateway for collecting data on the farm. The options available are: expensive, require professional maintenance, are not portable between systems, improvements are made only by the manufacturer, limited in customization options, difficult to operate, and data is owned by the company rather than the farmer. The gateway is designed …

Autonomous Navigation And Mapping Using Lidar, Steven E. Alsalamy, Ben C. Foo, Garrett C. Frels

Computer Engineering

The goal of this project was to make a fully autonomous robot, capable of mapping its surroundings and navigating through obstacles. This was done through the use of a chassis fitted with tracks and two motors, a lidar, a compass, and a Raspberry Pi. The robot also contains two batteries and is self powered. Encoders are used on the motors in order to track the distance traveled for more precise mapping and movements.

Darling, Robot For Roborodentia 2018, Michael Le, Steven Liu

Computer Engineering

For our senior project, our group decided to build a robot to participate in Roborodentia 2018, an annual robotics competition overlooked by Professor Seng that takes place during open house. When taking into consideration the classes that Computer Engineering students had to have taken and the skills that we have developed throughout our time here on campus, a robotics project seemed to be an appropriate culmination of both the technical and non-technical skills that we have acquired.

Dynamic Video Streaming For Nano Quadcopters, Shane Daniel Kent, Ryan Weideman, Nicholas Kimball

Computer Engineering

The objective of this project was to develop a system that streams real-time video from a Crazyflie 2.0 nano quadcopter. We discuss the motivation behind the project including applications to swarm robotics and computer vision research. We highlight the initial research and design goals that guided the development of the system such as hardware selection and system specifications. We detail the software and hardware subsystems that we implemented including the video-streaming board, firmware, and video-streaming user application. We examine the performance of the final system and discuss the limitations imposed by the hardware. We conclude by describing future work that …

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Roborodentia, Bryan D. Hendricks

Computer Engineering

This project is an autonomous robot, designed to perform a series of basic tasks without any human input. It’s based on the 2018 Roborodentia competition, in which teams of students design and build a small (roughly 1 square foot) robot that collects small foam spheres from vertical tubes on the edges of a table-sized arena, and shoot them into goals across the field. The more foam spheres the robot makes into the goals after a 3 minute time period, the more points they get. The challenge is doing so autonomously, without any human input after the initial timer for the …

Otd 360 Corsa Plate And Pcb Recreation, Patrick Ryan Malapira

Computer Engineering

Mechanical keyboards have a rich history alongside the development of personal computers with keyboards from leading manufacturers such as IBM and Apple, which are sought after by today’s enthusiast. As the hobby matured and hobbyist began straying from original equipment manufacturer, OEM, mechanical keyboards, enthusiasts sought to create their own keyboards.The custom mechanical keyboard hobby’s origins can be traced back to Korea on an online forum otd.kr. Custom mechanical keyboards has progressed far past the provided OEM solutions focusing on various aspects such as ergonomics, programmability, and portability. In today’s do it yourself, DIY, culture, hobbyists can play a role …

Lionfish Detection System, Carmelo Furlan, Andrew Boniface

Computer Engineering

Deep neural networks have proven to be an effective method in classification of images. The ability to recognize objects has opened the door for many new systems which use image classification to solve challenging problems where conventional image classification would be inadequate. We trained a large, deep convolutional neural network to identify lionfish from other species that might be found in the same habitats. Google’s Inception framework served as a powerful platform for our fish recognition system. By using transfer learning, we were able to obtain exceptional results for the classification of different species of fish. The convolutional neural network …

Roborodentia Final Report, Trevor James Gesell, Zeph Colby Nord, Mitchell Tyler Myjak

Computer Engineering

The Senior Project consisted of competing in Roborodentia, a competition in which groups build robots to complete a particular task. This event took place at the Cal Poly Open House on Saturday, April 12th, 2018. For the competition, the robot was to collect Nerf balls from supply tubes raised approximately 7” from the board and shoot them into nets placed along the opposite side of the course. The design, manufacture, and testing of the robot began the first week of Cal Poly winter quarter and lasted until the day of the competition.

Urinalysis Screening For Rural Communities, Dana Bren-Cardali, Lilian Dao, Jeffrey Destruel, Ryan Fernandez

Interdisciplinary Design Senior Theses

Access to medical care and health screenings is a necessity for patients around the globe, but it can be difficult to provide this without screenings becoming costly or convoluted. In rural and underdeveloped areas, patients are often disadvantaged when it comes to finding reliable and affordable healthcare. The isolation provided by their location and the rising costs of physicians makes it impossible for most impoverished communities to attain personalized care. Because of this, treatable diseases often go unaddressed, allowing diseases to progress to a critical condition. Mortality rates have shown to be higher in communities located in rural areas and …

The Human Keyboard, Derek Char, Thomas Chung, Alexander Mckee, Allen Pai

Interdisciplinary Design Senior Theses

Most products that implement features for user interactions utilize buttons or switches for the user to command to select actions to perform. Such designs are typically controlled with direct motions, such as touch or voice and are seldom designed in consideration of those unable to utilize direct control. In this project, we designed technology that reads naturally occuring biosignals from the body, which then can be apply those signals with any interface. For our specific application in this project, we decided to implement a keyboard. Instead of teaching the fingers how to type on a mechanical keyboard, the body can …

Leave The Features: Take The Cannoli, Jonathan Joseph Catanio

Master's Theses

Programming languages like Python, JavaScript, and Ruby are becoming increasingly popular due to their dynamic capabilities. These languages are often much easier to learn than other, statically type checked, languages such as C++ or Rust. Unfortunately, these dynamic languages come at the cost of losing compile-time optimizations. Python is arguably the most popular language for data scientists and researchers in the artificial intelligence and machine learning communities. As this research becomes increasingly popular, and the problems these researchers face become increasingly computationally expensive, questions are being raised about the performance of languages like Python. Language features found in Python, more …