Computer Engineering Commons^™

Transferring And Regularizing Prediction For Semantic Segmentation, Yiheng Zhang, Zhaofan Qiu, Ting Yao, Chong-Wah Ngo, Dong Liu, Tao Mei

Research Collection School Of Computing and Information Systems

Semantic segmentation often requires a large set of images with pixel-level annotations. In the view of extremely expensive expert labeling, recent research has shown that the models trained on photo-realistic synthetic data (e.g., computer games) with computer-generated annotations can be adapted to real images. Despite this progress, without constraining the prediction on real images, the models will easily overfit on synthetic data due to severe domain mismatch. In this paper, we novelly exploit the intrinsic properties of semantic segmentation to alleviate such problem for model transfer. Specifically, we present a Regularizer of Prediction Transfer (RPT) that imposes the intrinsic properties …

Communications With Spectrum Sharing In 5g Networks Via Drone-Mounted Base Stations, Liang Zhang

Dissertations

The fifth generation wireless network is designed to accommodate enormous traffic demands for the next decade and to satisfy varying quality of service for different users. Drone-mounted base stations (DBSs) characterized by high mobility and low cost intrinsic attributes can be deployed to enhance the network capacity. In-band full-duplex (IBFD) is a promising technology for future wireless communications that can potentially enhance the spectrum efficiency and the throughput capacity. Therefore, the following issues have been identified and investigated in this dissertation in order to achieve high spectrum efficiency and high user quality of service.

First, the problem of deploying DBSs …

From Protecting To Performing Privacy, Garfield Benjamin

The Journal of Sociotechnical Critique

Privacy is increasingly important in an age of facial recognition technologies, mass data collection, and algorithmic decision-making. Yet it persists as a contested term, a behavioural paradox, and often fails users in practice. This article critiques current methods of thinking privacy in protectionist terms, building on Deleuze's conception of the society of control, through its problematic relation to freedom, property and power. Instead, a new mode of understanding privacy in terms of performativity is provided, drawing on Butler and Sedgwick as well as Cohen and Nissenbaum. This new form of privacy is based on identity, consent and collective action, a …

Evaluating Driving Performance Of A Novel Behavior Planning Model On Connected Autonomous Vehicles, Keyur Shah

Honors Scholar Theses

Many current algorithms and approaches in autonomous driving attempt to solve the "trajectory generation" or "trajectory following” problems: given a target behavior (e.g. stay in the current lane at the speed limit or change lane), what trajectory should the vehicle follow, and what inputs should the driving agent apply to the throttle and brake to achieve this trajectory? In this work, we instead focus on the “behavior planning” problem—specifically, should an autonomous vehicle change lane or keep lane given the current state of the system?

In addition, current theory mainly focuses on single-vehicle systems, where vehicles do not communicate with …

Reducing Run-Time Adaptation Space Via Analysis Of Possible Utility Bounds, Clay Stevens, Hamid Bagheri

School of Computing: Conference and Workshop Papers

Self-adaptive systems often employ dynamic programming or similar techniques to select optimal adaptations at run-time. These techniques suffer from the “curse of dimensionality", increasing the cost of run-time adaptation decisions. We propose a novel approach that improves upon the state-of-the-art proactive self-adaptation techniques to reduce the number of possible adaptations that need be considered for each run-time adaptation decision. The approach, realized in a tool called Thallium, employs a combination of automated formal modeling techniques to (i) analyze a structural model of the system showing which configurations are reachable from other configurations and (ii) compute the utility that can be …

Algorithms For Data Reliability Based On A Cryptographic Distributed Database (Blockchain), Fayzullo M. Nazarov, Akmal R. Akhatov, Farkhod F. Meliyev

Scientific Journal of Samarkand University

The ever-growing information flow in modern society, the diversity of information technologies, the complexity of tasks solved on a computer, have set many tasks for users of these technologies. Currently, due to the numerous data streams, the need to process this data in a short period is also growing. Due to the large number of data streams for their storage and processing in the shortest possible time it is required to create automated systems. This research paper presents algorithms for solving the problem of increasing data flow by forming a distributed database. Based on this, methods for optimizing the storage …

Analysis Of Human Affect And Bug Patterns To Improve Software Quality And Security, Md Rakibul Islam

LSU New Orleans Theses and Dissertations

The impact of software is ever increasing as more and more systems are being software operated. Despite the usefulness of software, many instances software failures have been causing tremendous losses in lives and dollars. Software failures take place because of bugs (i.e., faults) in the software systems. These bugs cause the program to malfunction or crash and expose security vulnerabilities exploitable by malicious hackers.

Studies confirm that software defects and vulnerabilities appear in source code largely due to the human mistakes and errors of the developers. Human performance is impacted by the underlying development process and human affects, such as …

Facilitating Mixed Self-Timed Circuits, Alexandra R. Hanson

University Honors Theses

Designers constrain the ordering of computation events in self-timed circuits to ensure the correct behavior of the circuits. Different circuit families utilize different constraints that, when families are combined, may be more difficult to guarantee in combination without inserting delay to postpone necessary events. By analyzing established constraints of different circuit families like Click and GasP, we are able to identify the small changes necessary to either 1) avoid constraints entirely; or 2) decrease the likelihood of necessary delay insertion. Because delay insertion can be tricky for novice designers and because the likelihood of its requirement increases when mixing different …

Non-Obstetrical Robotic-Assisted Laparoscopic Surgery In Pregnancy: A Systematic Literature Review., Courtney Capella, Joseph Godovchik, Thenappan Chandrasekar, Huda B. Al-Kouatly

Department of Urology Faculty Papers

Urologic and gynecologic surgeons are the top utilizers of robotic surgery; however, non-obstetrical robotic-assisted laparoscopic surgery (RALS) in pregnant patients is infrequent. A systematic literature review was performed to ascertain the frequency, indication and complications of RALS in pregnancy. Results showed thirty-eight pregnancies from eleven publications between 2008-2020. Five cases were for urologic indication and thirty-three for gynecologic indication. Minimal surgical alterations were required. Although no adverse maternal-fetal outcomes were reported, there are not enough cases published to determine safety. This review demonstrates the feasibility of RALS for the pregnant population in the hands of competent robotic surgeons.

Design Of A Drone-Flight-Enabled Wireless Isolation Chamber, John Wensowitch

Electrical Engineering Theses and Dissertations

The next wave of drone applications is moving from repeatable, single-drone activities such as evaluating propagation environments to team-based, multi-drone objectives such as drone-based emergency services. In parallel, testbeds have sought to evaluate emerging concepts such as highly-directional and distributed wireless communications. However, there is a lack of intersection between the two works to characterize the impact of the drone body, antenna placement, swarm topologies, and multi-dimensional connectivity needs that require in-flight experimentation with a surrounding testbed infrastructure. In this work, we design a drone-flight-enabled isolation chamber to capture complex spatial wireless channel relationships that drone links experience as applications …

Side-Channel Power Resistance For Encryption Algorithms Using Implementation Diversity, Ivan M. Bow

Electrical and Computer Engineering ETDs

This thesis paper investigates countermeasures to hardware side-channel attacks and proposes a new solution to this ever growing threat against data integrity and security. The side-channel attack methods, differential power analysis and correlation power analysis, are both very powerful techniques and are used to gain access to secrets inside of a field programmable gate array that are otherwise inaccessible, in particular the cryptographic key for the Advanced Encryption Standard algorithm. To counter these attacks, we propose a method of changing the internal hardware configuration of the field programmable gate array using dynamic partial reconfiguration. Using this method, we change the …

Design And Research On Semi-Physical Simulation Test System Of Aero Engine, Jingfeng Shen, Chulei Li, Dianliang Wu, Jiaxin Zhang

Journal of System Simulation

Abstract: Aiming at the high danger and difficulty of the operation in the aero-engine test, a semi-physical simulation test system that integrates the functions of the test-run operation training, process analysis, simulation of the typical engine performance fault is proposed. Based on the fast response, accurate calculation and high human operation simulation of the engine digital model, the key problems of the research and implementation, such as the structural design of the distributed semi-physical simulation system, visualization of the calculation model of the engine subsystem and real-time visualization of the aero-engine test data displaying in the three-dimensional cave automatic …

Simulation Of Human Body Temperature Distribution Based On New Solution For Heat Conduction Differential Equation, Sina Dang, Hongjun Xue, Xiaoyan Zhang, Chengwen Zhong, Caiyong Tao

Journal of System Simulation

Abstract: In the traditional rectangular coordinate system, the human body characteristics can not match the differential equation. This leads to the low accuracy of the simulation results. Based on the geometric characteristics of the elliptic cylinder, the differential equation of the heat conduction is transformed from the rectangular coordinate system to the elliptic one, and the finite volume method of the alternating direction full implicit scheme pair is adopted. The improved heat conduction differential equation is applied to the simulation of the human body temperature. The simulation results, compared with the calculated values of the traditional differential equation …

A New Interactive Simulation Method For Virtual Tape Measurement, Dongjin Huang, Chenfeng Jiang, Xianglong Wang, Linhui Gu

Journal of System Simulation

Abstract: The virtual tape measurement is an extremely important process in the industrial training systems, and the fidelity of the measurement depends on the stability of the grasp and the accuracy of the tape measure. Combined with the virtual hand, a new interactive simulation method for the virtual tape measurement is proposed and applied to the wind-driven generator alignment training simulation system. The fusion of the geometric rules and physical rules improves the grasping judgment method, and the quaternion adjusts the grasp gesture. Based on the 3D algorithm, the tape width uneven is solved by optimizing the vertex setting to …

Modeling Analysis And Prediction On Ncp Epidemic Transmission, Huaxiong Sheng, Wu Lin, Changliang Xiao

Journal of System Simulation

Abstract: The modeling analysis on the NCP (Novel Coronavirus Pneumonia) epidemic transmission before and after the closure of Wuhan is presented. On the basis of preprocessing the epidemic data, the classical SIR model and differential recurrence method are used to analyze and forecast the epidemic situation in the stage of control. The theoretical value and measured value fits well. In the stage of free transmission, the logistic model is used to compare and analyze the epidemic data five days in advance or later with the actual data to show the importance of taking the epidemic prevention measures in time. The …

Research On Failure Modes Analysis Based On Weighted Evidence Theory, Lulu Shao, Jihong Han, Niu Kan, Xiaohu Liu, Shao Fang

Journal of System Simulation

Abstract: Aiming at the risk priority numbers of different failure modes being equal and the criticality of the fault modes changing greatly due to the tiny change of the risk parameters, a method of the failure modes analysis based on the weighted evidence theory is proposed from the perspective of the methodology of dealing with the uncertainty problem. The method qualifies the epistemic uncertainty existing in the expert evaluation of the risk parameters into the basic belief assignment and expert attribute weight respectively, and the information propagation and processing of the epistemic uncertainty is solved, and the ordered arrangement …

Design And Implementation Of Reconfigurable Video Array Processor Test Platform, Jiang Lin, Feilong He, Shan Rui, Wang Shuai, Haoyue Wu, Wu Xin

Journal of System Simulation

Abstract: Aiming at the design requirements of the reconfigurable video array processor and the problem of traditional method testing the video codec system with slow speed, low precision and poor observability. A Qt-based user interface is developed, and a hardware-software co-testing platform based on FPGA is designed and implemented. The platform realizes the data transmission and image reproduction based on the software simulation on the PC side, and the parallel mapping of the video encoding and decoding algorithms based on the reconfigurable video array processor on the FPGA side. The experiment results show that the data can be transmitted correctly …

Force/Position Hybrid Control Method For Surface Parts Polishing Robot, Yufeng Ding, Xinpu Min

Journal of System Simulation

Abstract: A force/position hybrid control method for polishing the complex surface with an industrial robot is put forward. The method can achieve the stable force control and precise position control to ensure the consistency of the material removal rate at different normal vectors. After the trajectory of the normal vector is planned in CAD software, the force signal feedback from the sensor and the PI controller in the normal vector direction are combined,and the robot end tool corrects the motion trajectory in the vector direction of the surface to indirectly control the contact force between the tool and the surface. …

High-Fidelity Simulation Of Video-Assisted Thoracoscopic Surgery Lobectomy, Peng Liu, Weixin Si, Zheng Rui, Xiangyun Liao, Dongliang Xu, Ping'an Wang

Journal of System Simulation

Abstract: The virtual reality simulator of the video-assisted thoracoscopic (VATS) surgery lobectomy is of great value to the surgeon's surgical training and planning. In order to simulate the high-fidelity video-assisted thoracoscopic lobectomy, a VATS lobectomy simulator to realistically and efficiently simulate the different surgical operations during the VATS lobectomy procedure is developed. Based on the Position-Based Dynamics framework, the deformation induced by tool-tissue and tissue-tissue interactions, soft tissue cuts as well as subsequent surgical suture operations is simulated. The Marching Cubes algorithm is employed to achieve the surface rendering, especially for the cutting process. The GPU parallel computing technique is …

Application Of Improved Inverse Decoupling Active Disturbance Rejection Internal Model Control In Grinding, Zhou Ying, Qiaojuan Jia, Zhang Yan, Mingxin Chang

Journal of System Simulation

Abstract: Aiming at the characteristics of the multivariable, strong coupling and large time delay of the grinding classification system, the improved inverse decoupling active disturbance rejection internal model control method is proposed. The inverse decoupling method is used to realize the decoupling of the grinding classification system, and the improved internal model control and linear active disturbance rejection control are adopted for the decoupled subsystem. By introducing the internal model compensator and the gain to compensate the time delay, the dependence of the system upon the model is reduced .The model mismatch, external disturbance and uncertainties are suppressed by adjusting …