Multi-Floor Evacuation Model Based On Wavelet Neural Network,
2022
1.School of Computer Science, Chengdu Normal University, Chengdu 611130, China;2.Key Laboratory of Interior Layout Optimization and Security, Institutions of Higher Education of Sichuan Province, Chengdu Normal University, Chengdu 611130, China;
Multi-Floor Evacuation Model Based On Wavelet Neural Network, Juan Wei, Lei You, Yangyong Guo, Zhihai Tang
Journal of System Simulation
Abstract: Crowd evacuation in a multi-floor environment is a popular social concern, while the stagnation phenomenon easily occurs when simulating a multi-floor complex environment with the traditional social force model. Therefore, An improved social force model is proposed by a wavelet neural network, and a new multi-floor evacuation model is built. In the model, a pedestrian's direction of movement is obtained by the field model, which is used as the self-driving direction of the social force model. Meanwhile, the evaluation indexes of the exit congestion degree, path congestion degree, and average velocity in a multi-floor environment are given, and a …
Zoomfft-Based Demodulation Algorithm For Underwater Acoustic Ofdm Signals,
2022
1.School of Electronic Engineering and Automation, Guilin University of Electronic Technology, Guilin 541004, China;2.Guangxi Key Laboratory of Automatic Detection Technology and Instruments, Guilin 541004, China;
Zoomfft-Based Demodulation Algorithm For Underwater Acoustic Ofdm Signals, Qing Guo, Angdi Li, Jing Wu, Haitao Su
Journal of System Simulation
Abstract: The picket fence effect of fast Fourier transform (FFT) restricts the demodulation performance of the underwater acoustic(UWA) communication systemusing orthogonal frequency division multiplexing (OFDM). To solve this problem, we propose a demodulation algorithm based on ZoomFFT. Specifically, the received signal is processed by frequency shifting and downsampling forarefined spectrum, which improves the spectralresolution and weakens the picketfence effect.Meanwhile, the channel response is refined, and the channel equalization algorithm is constructed on the basis of the minimum mean square error (MMSE) principle to eliminate the channel influence. Simulations show that the performance of underwater acoustic OFDM demodulation algorithm based on …
Design Of Fatigue Driving Detection System Based On Cascaded Neural Network,
2022
1.College of Engineering, Zunyi Normal University, Zunyi 563006, China;
Design Of Fatigue Driving Detection System Based On Cascaded Neural Network, Bangqian Ao, Sha Yang, Jinqing Linghu, Zhenhuan Ye
Journal of System Simulation
Abstract: An algorithm is proposed to greatly improves the face detection rate and ensures the accuracy by adjusting the size of input images, expanding the minimum face size, and reducing the scaling ratio between layers of the detection window. The detection efficiency of this algorithm is 18 times higher than that of the original MTCNN. By building a new CNN structure model for the detection of eyes and mouths, we can achieve network detection accuracy of 95.6%. The proposed network is cascaded with the original MTCNN to continue classifying and locating the eyes and mouth in the formerly …
Segmentation Line Detection In Dental Model Based On Target Region Constraint,
2022
College of Computer Science & Technology, Xi'an University of Science and Technology, Xi'an 710054, China;
Segmentation Line Detection In Dental Model Based On Target Region Constraint, Tian Ma, Yun Li, Jiaojiao Li, Yuancheng Li
Journal of System Simulation
Abstract: It is an important pretreatment of a virtual orthodontic system to accurately segment teeth from a dental model. In the present methods, all patches are computed directly. To solve this problem, this paper proposes a segmentation line detection method based on target region constraint, which narrows down the detection range to the area around the actual segmentation line. In this method, the cutting plane and the cutting line are automatically formed according to the positions of seed points. The detection range is determined by the search for the position with the greatest negative curvature on the cutting line. The …
Constructing The Agent Discrete Simulation Based On Devs Atomic Model,
2022
1.Beihang University, Beijing 100191, China;2.Engineering Research Center of Complex Product Advanced Manufacturing Systems, Ministry of Education, Beijing 100191, China;
Constructing The Agent Discrete Simulation Based On Devs Atomic Model, Xiaohan Wang, Lin Zhang, Yuanjun Laili, Kunyu Xie, Tingchun Hu
Journal of System Simulation
Abstract: In order to resolve the nonlinear and ill-posed inverse problem of the image reconstruction of electrical capacitance tomography (ECT), an image reconstruction algorithm based on one-dimensional convolutional neural network (1D CNN) is presented. The nonlinear mapping relationship between the independent measurement value of ECT system and the gray value of reconstructed image is established by 1D CNN. Six typical flow regimes with random distribution are obtained by the finite element simulation software and a 1D CNN is successfully trained. Simulation and static experiments are carried out and the reconstructed images using linear back projection, Landweber iterative algorithm and 1D …
Review Of System Of Systems Combat Effectiveness Evaluation And Optimization Methods,
2022
1.Military Exercise and Training Center, Army Academy of Armored Forces, Beijing 100072, China;2.Unit 32128 of PLA, Jinan 250024, China;
Review Of System Of Systems Combat Effectiveness Evaluation And Optimization Methods, Ziwei Zhang, Qisheng Guo, Zhiming Dong, Ang Gao, Yifei Wang
Journal of System Simulation
Abstract: The characteristics of system-of-systems combat effectiveness evaluation and optimization are analyzed. In light of the "holism", this paper proposes an idea of dividing system of systems combat effectiveness evaluation and optimization into three stages of comprehensive evaluation, analysis, and optimization. As for the practical problems that need to be solved in the three stages, typical methods suitable for each stage are summarized.The advantages and disadvantages of different methods are then compared. In view of the practical difficulties in implementing system of systems combat effectiveness evaluation and optimization guided by the "holism", this paper puts forward the next research directions …
Simulation And Optimization Of A New Multi-Channel Contact Center System,
2022
Business School, University of Shanghai for Science and Technology, Shanghai 200093, China;
Simulation And Optimization Of A New Multi-Channel Contact Center System, Junxiang Li, Lichao Li, Kun Ma
Journal of System Simulation
Abstract: In the actual operation of a contact center, it often encounters a large number of calls caused by an emergency. A traditional call center with a simple first-come-first-served queuing rule can hardly handle the rapid increase of calls properly. In this regard, without changing the number of seats, the call-back service channel for evacuating tasks and the special service channel for ensuring the service level are added. Considering customer abandonment, a new multi-channel queuing model for a contact center is built. This model is simulated by FlexSim software, and the results are comparatively analyzed. It is found that …
Modeling And Optimization For Manufacturing Cell Scheduling Based On Improved Wolf Pack Algorithm And Simulation,
2022
School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;
Modeling And Optimization For Manufacturing Cell Scheduling Based On Improved Wolf Pack Algorithm And Simulation, Zi'an Zhao, Hong Zhou, Yingjian Lei
Journal of System Simulation
Abstract: Aiming at the domestic aircraft stall spin simulation training need, a stall spin simulation training system is developed. The training system consists of the multi-channel dome visual system, the semi-physical simulation cockpit and the maneuvering force control loading system, etc. Distributed simulation technology is used to develop a realistic man-in-the-loop simulation training environment. For the stall spin simulation, the multi-source aerodynamic data is processed comprehensively, and an unsteady aerodynamic model at high angle of attack (AOA) is constructed, and the heavy-load digital electric control loading technology is used to realize the simulation of stall spin alternating force and jitter …
Vehicle Routing Problem With Refined Oil Secondary Distribution Considering Workload Balance,
2022
1.School of Information, Beijing Wuzi University, Beijing 101149, China;
Vehicle Routing Problem With Refined Oil Secondary Distribution Considering Workload Balance, Zhenping Li, Guang Yang, Qianqian Han
Journal of System Simulation
Abstract: The small-signal model of a DC/DC converter is usually built by the analytic method, and its accuracy is verified by the frequency domain method. A new idea is developed to model the small signal of the converter, i.e., directly using the frequency domain method.The design process is as follows: The principle and modeling mechanism of the frequency domain method are analyzed, and the realization flow of Matlab modeling is introduced. A typical phase-shifted full-bridge converter is taken as the design object, and a simulation model is built by Simulink. The transfer function is obtained on the basis of …
Monocular Semantic Slam Method Based On Object Relation Description,
2022
Department of Automation, University of Science and Technology of China, Hefei 230027, China;
Monocular Semantic Slam Method Based On Object Relation Description, Shiqi Lin, Jikai Wang, Haoyuan Pei, Hao Zhao, Zonghai Chen
Journal of System Simulation
Abstract: Semantic information perception of the external environment and accurate positioning are the keys to autonomous navigation and operation of mobile robots. This paper proposes a method of semantic simultaneous localization and mapping (SLAM) based on a monocular camera. The system completes three-dimensional (3D) object detection while estimating the trajectory. We model the 3D objects with cuboids. Then, the semantic meanings, color distribution, size and neighborhood topology of the objects are extracted as descriptors for the accurate matching of objects between different frames. The camera pose, map points and object landmarks are optimized jointly in the backend of the system. …
Research On Design Method For Transfer Function Of Dc/Dc Converter System Based On Frequency Domain Method,
2022
School of Mechanical and Electrical Engineering, Chengdu University of Technology, Chengdu 610059, China;
Research On Design Method For Transfer Function Of Dc/Dc Converter System Based On Frequency Domain Method, Song Gao, Xue Yin, Jiantao Xu, Yuhao Miao
Journal of System Simulation
Abstract: A robust optimal synchronization control method based on coupling dynamics model of the H-type motion platform is proposed for the problem that the H-type motion platform driven directly by permanent magnet linear synchronous motor has uncertainties such as biaxial coupling, parameter perturbation and external disturbances, which affect the synchronization control accuracy and robustness of the system. A biaxial coupling dynamics model is established based on Euler-Lagrange equation. The cross coupling synchronization controller is designed to effectively combine the single-axis tracking error with the biaxial synchronization error and its rate of change. TheH∞robust optimal synchronous controller …
Research On Decision-Making Of Closed-Loop Supply Chain For Dual-Channel Recovery Based On Game Theory,
2022
Business School, University of Shanghai for Science and Technology, Shanghai 200093, China;
Research On Decision-Making Of Closed-Loop Supply Chain For Dual-Channel Recovery Based On Game Theory, Ying Xu, Qinming Liu, Linsen Zhou
Journal of System Simulation
Abstract: To tackle the difficulties and resource depletion in current packaging recycling, this paper constructs a centralized decision-making game model and three Stackelberg game models. Specifically, these Stackelberg game models are developed depending on the differences in the game power of participants in the closed-loop supply chain for dual-channel recovery, respectively corresponding to the cases where the manufacturer, the distributor or the third-party recycler is dominant. The optimal solutions of the four models are compared and analyzed. The benefits of decentralized decision-making do not reach the Pareto optimality as compared with centralized decision-making. An improved revenue sharing contract is …
Component Design And Simulation Of Netted Radar Fusion Processing,
2022
State Key Laboratory of Complex Electromagnetic Environment Effects on Electronics and Information System, National University of Defense Technology, Changsha 410073, China;
Component Design And Simulation Of Netted Radar Fusion Processing, Jing Wu, Zhiming Xu, Xiaofeng Ai, Feng Zhao, Shunping Xiao
Journal of System Simulation
Abstract: Data fusion processing technology is the core of netted radars. Taking the air-defense radar network as the reference, this paper builds a component-based and reconfigurable data fusion algorithm library. With the component design method, the process of data fusion is divided into different components, such as data validity check, error match, time-space match, plot association, plot fusion, track initiation, track filtering, track association, track fusion, and track management. Each component involves different algorithms with a unified external interface, and algorithms can be chosen by parameter setting to meet different fusion requirements. Then, the complete processing template forplot fusion and …
Large Scale Dataset Of Real Space Electronic Charge Density Of Cubic Inorganic Materials From Density Functional Theory (Dft) Calculations,
2022
University of South Carolina - Columbia
Large Scale Dataset Of Real Space Electronic Charge Density Of Cubic Inorganic Materials From Density Functional Theory (Dft) Calculations, Fancy Qian Wang, Kamal Choudhary, Jianjun Hu, Ming Hu
Faculty Publications
Driven by the big data science, material informatics has attracted enormous research interests recently along with many recognized achievements. To acquire knowledge of materials by previous experience, both feature descriptors and databases are essential for training machine learning (ML) models with high accuracy. In this regard, the electronic charge density ρ(r), which in principle determines the properties of materials at their ground state, can be considered as one of the most appropriate descriptors. However, the systematic electronic charge density ρ(r) database of inorganic materials is still in its infancy due to the difficulties in …
A Precise Dispenser Design
For Canine Cognition
Research,
2022
University of Nebraska-Lincoln
A Precise Dispenser Design For Canine Cognition Research, Walker Arce, Jeffrey R. Stevens
Department of Electrical and Computer Engineering: Faculty Publications
Some forms of canine cognition research require a dispenser that can accurately dispense precise quantities of treats. When using off-the-shelf or retrofitted dispensers, there is no guarantee that a precise number of treats will be dispensed. Often, they will over-dispense treats, which may not be acceptable for some tasks. Here we describe a 3D-printed precise treat dispenser with a 59-treat capacity driven by a stepper motor drive and controlled by an integrated Raspberry Pi. The dispenser can be built for less than 200 USD and is fully 3D printable. While off-the-shelf dispensers can result in an error rate of 20–30%, …
Books Within Books In Fantasy And Science Fiction: “You Are The Dreamer And The Dream”,
2022
Southwestern Oklahoma State University
Books Within Books In Fantasy And Science Fiction: “You Are The Dreamer And The Dream”, Phillip Fitzsimmons
Faculty Books & Book Chapters
This chapter discusses books that exist only within works of science fiction and fantasy—what the “List of Fictional Books” on Wikipedia calls a “fictional book” and what Claire Fallon calls “invented books” in her article for the Huffpost website, “Fictional Books Within Books We Wish Were Real.”
The David Oberhelman Collection Of Science Fiction, Fantasy, And Tolkieniana At Oklahoma State University,
2022
Southwestern Oklahoma State University
The David Oberhelman Collection Of Science Fiction, Fantasy, And Tolkieniana At Oklahoma State University, Phillip Fitzsimmons
Faculty Books & Book Chapters
In September 2020 I drove to the Oklahoma State University (OSU) Stillwater campus to see “The David Oberhelman J. R. R. Tolkien Collection” exhibit, on display on the Edmon Low Library’s second-floor mezzanine in the Lisa and Mark Snell Gallery.
A New Approach For Grasp Quality Calculation Using Continuous Boundary Formulation Of Grasp Wrench Space,
2022
Western University
A New Approach For Grasp Quality Calculation Using Continuous Boundary Formulation Of Grasp Wrench Space, Shuwei Qiu, Mehrdad Kermani Ph.D., P.Eng.
Electrical and Computer Engineering Publications
In this paper, we aim to use a continuous formulation to efficiently calculate the well-known wrench-based grasp metric proposed by Ferrari and Canny which is the minimum distance from the wrench space origin to the boundary of the grasp wrench space. Considering the L∞" role="presentation" style="box-sizing: border-box; margin: 0px; padding: 0px; display: inline-block; line-height: normal; font-size: 16.200000762939453px; word-spacing: normal; word-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; position: relative;"> metric and the nonlinear friction cone model, the challenge of calculating this metric is to determine the boundary of the grasp …
Performance Analysis Of Lightweight Internet Of Things Devices On Blockchainnetworks,
2022
TÜBİTAK
Performance Analysis Of Lightweight Internet Of Things Devices On Blockchainnetworks, Cem Kösemen, Gökhan Dalkiliç, Şafak Öksüzer
Turkish Journal of Electrical Engineering and Computer Sciences
Potential integration or cooperation of the Internet of things (IoT) systems and the blockchain technology is nowadays attracting remarkable interest from the researchers. These inter-operating systems often have to rely on lowcost, low-power, and robust IoT devices that can communicate with the blockchain network through smart contracts. In this work, we designed and ran a benchmark study for ESP32-based lightweight IoT devices interacting within the Quorum blockchain. A software library was built for ESP32 devices to enable elliptic-curve digital signing, Keccak-256 hashing, decoding, encoding, and secure private key generation capabilities, which all are the basic functional requirements for running a …
Tri-Op Redactable Blockchains With Block Modification, Removal, And Insertion,
2022
TÜBİTAK
Tri-Op Redactable Blockchains With Block Modification, Removal, And Insertion, Mohammad Sadeq Dousti, Alpteki̇n Küpçü
Turkish Journal of Electrical Engineering and Computer Sciences
In distributed computations and cryptography, it is desirable to record events on a public ledger, such that later alterations are computationally infeasible. An implementation of this idea is called blockchain, which is a distributed protocol that allows the creation of an immutable ledger. While such an idea is very appealing, the ledger may be contaminated with incorrect, illegal, or even dangerous data, and everyone running the blockchain protocol has no option but to store and propagate the unwanted data. The ledger is bloated over time, and it is not possible to remove redundant information. Finally, missing data cannot be inserted …
