Other Computer Engineering Commons^™

Deepfakes, Shallowfakes, And The Need For A Private Right Of Action, Eric Kocsis

Dickinson Law Review (2017-Present)

For nearly as long as there have been photographs and videos, people have been editing and manipulating them to make them appear to be something they are not. Usually edited or manipulated photographs are relatively easy to detect, but those days are numbered. Technology has no morality; as it advances, so do the ways it can be misused. The lack of morality is no clearer than with deepfake technology.

People create deepfakes by inputting data sets, most often pictures or videos into a computer. A series of neural networks attempt to mimic the original data set until they are nearly …

Book Review: This Is How They Tell Me The World Ends: The Cyberweapons Arms Race (2020) By Nicole Perlroth, Amy C. Gaudion

Dickinson Law Review (2017-Present)

No abstract provided.

An Automated Framework To Debug System-Level Concurrency Failures, Tarannum Shaila Zaman

Theses and Dissertations--Computer Science

The ever-increasing parallelism in computer systems has made software more prone to concurrency failures, causing problems during both pre- and post-development. Debugging concurrent programs is difficult because of the non-deterministic behavior and the specific sequences of interleaving in the execution flow. Debugging is a technique where programmers reproduce the bug, identify the root cause, and then take necessary steps to remove the bug from the system. The failure information may come from the bug reports of the testing phase or the production runs. In both cases, there should be steps taken to reproduce and localize the failure. However, reproducing and …

An Experimental Study Towards Underwater Propulsion System Using Structure Borne Traveling Waves, Shreyas Suhas Gadekar

Dissertations, Master's Theses and Master's Reports

The method of generating steady-state structure-borne traveling waves underwater in an infinite media creates abundant opportunities in the field of propulsive applications, and they are gaining attention from several researchers. This experimental study provides a framework for harnessing traveling waves in a 1D beam immersed under quiescent water using two force input methods and providing a motion to an object floating on the surface of the water.

In this study, underwater traveling waves are tailored using structural vibrations at five different frequencies in the range of 10Hz to 300Hz. The resulting fluid motion provides a propulsive thrust that moves a …

Reflecting On Recurring Failures In Iot Development, Dharun Anandayuvaraj, James C. Davis

Department of Electrical and Computer Engineering Faculty Publications

As IoT systems are given more responsibility and autonomy, they offer greater benefits, but also carry greater risks. We believe this trend invigorates an old challenge of software engineering: how to develop high-risk software-intensive systems safely and securely under market pressures? As a first step, we conducted a systematic analysis of recent IoT failures to identify engineering challenges. We collected and analyzed 22 news reports and studied the sources, impacts, and repair strategies of failures in IoT systems. We observed failure trends both within and across application domains. We also observed that failure themes have persisted over time. To alleviate …

Reflections On Software Failure Analysis, Paschal C. Amusuo, Aishwarya Sharma, Siddharth R. Rao, Abbey Vincent, James C. Davis

Department of Electrical and Computer Engineering Faculty Publications

Failure studies are important in revealing the root causes, behaviors, and life cycle of defects in software systems. These studies either focus on understanding the characteristics of defects in specific classes of systems or the characteristics of a specific type of defect in the systems it manifests in. Failure studies have influenced various software engineering research directions, especially in the area of software evolution, defect detection, and program repair.

In this paper, we reflect on the conduct of failure studies in software engineering. We reviewed a sample of 52 failure study papers. We identified several recurring problems in these studies, …

Sok: Analysis Of Software Supply Chain Security By Establishing Secure Design Properties, Chinenye Okafor, Taylor R. Schorlemmer, Santiao Torres-Arias, James C. Davis

Department of Electrical and Computer Engineering Faculty Publications

This paper systematizes knowledge about secure software supply chain patterns. It identifies four stages of a software supply chain attack and proposes three security properties crucial for a secured supply chain: transparency, validity, and separation. The paper describes current security approaches and maps them to the proposed security properties, including research ideas and case studies of supply chains in practice. It discusses the strengths and weaknesses of current approaches relative to known attacks and details the various security frameworks put out to ensure the security of the software supply chain. Finally, the paper highlights potential gaps in actor and operation-centered …

Exploiting Input Sanitization For Regex Denial Of Service, Efe Barlas, Xin Du, James C. Davis

Department of Electrical and Computer Engineering Faculty Publications

Web services use server-side input sanitization to guard against harmful input. Some web services publish their sanitization logic to make their client interface more usable, e.g., allowing clients to debug invalid requests locally. However, this usability practice poses a security risk. Specifically, services may share the regexes they use to sanitize input strings — and regex-based denial of service (ReDoS) is an emerging threat. Although prominent service outages caused by ReDoS have spurred interest in this topic, we know little about the degree to which live web services are vulnerable to ReDoS.

In this paper, we conduct the first black-box …

Discrepancies Among Pre-Trained Deep Neural Networks: A New Threat To Model Zoo Reliability, Diego Montes, Pongpatapee Peerapatanapokin, Jeff Schultz, Chengjun Guo, Wenxin Jiang, James C. Davis

Department of Electrical and Computer Engineering Faculty Publications

Training deep neural networks (DNNs) takes significant time and resources. A practice for expedited deployment is to use pre-trained deep neural networks (PTNNs), often from model zoos.collections of PTNNs; yet, the reliability of model zoos remains unexamined. In the absence of an industry standard for the implementation and performance of PTNNs, engineers cannot confidently incorporate them into production systems. As a first step, discovering potential discrepancies between PTNNs across model zoos would reveal a threat to model zoo reliability. Prior works indicated existing variances in deep learning systems in terms of accuracy. However, broader measures of reliability for PTNNs from …

An Empirical Study On The Impact Of Deep Parameters On Mobile App Energy Usage, Qiang Xu, James C. Davis, Y Charlie Hu, Abhilash Jindal

Department of Electrical and Computer Engineering Faculty Publications

Improving software performance through configuration parameter tuning is a common activity during software maintenance. Beyond traditional performance metrics like latency, mobile app developers are interested in reducing app energy usage. Some mobile apps have centralized locations for parameter tuning, similar to databases and operating systems, but it is common for mobile apps to have hundreds of parameters scattered around the source code. The correlation between these "deep" parameters and app energy usage is unclear. Researchers have studied the energy effects of deep parameters in specific modules, but we lack a systematic understanding of the energy impact of mobile deep parameters. …

Design Project: 3d Printer/Injection Molder Hybrid, Lee Paolucci, Luke Everhart, Brandon Leap, Karson Lorey

Williams Honors College, Honors Research Projects

In the realm of rapid, small-scale prototyping, there are a few main factors that drive decisions to invest resources in technology to make that prototyping possible. Cost and ease of use are two of the most influential when looking at most SMEs (Small to Medium-sized Enterprises). The U.S. Small Business Administration defines an SME as smaller than 1,250 employees. According to An Assessment of Implementation of Entry-Level 3D Printers from the Perspective of Small Businesses, 59% of small manufacturers had implemented 3D printers as of 2014. However, no matter what technology is used in rapid prototyping, there are common …

Adapting Deep Learning For Underwater Acoustic Communication Channel Modeling, Li Wei

Dissertations, Master's Theses and Master's Reports

The recent emerging applications of novel underwater systems lead to increasing demand for underwater acoustic (UWA) communication and networking techniques. However, due to the challenging UWA channel characteristics, conventional wireless techniques are rarely applicable to UWA communication and networking. The cognitive and software-defined communication and networking are considered promising architecture of a novel UWA system design. As an essential component of a cognitive communication system, the modeling and prediction of the UWA channel impulse response (CIR) with deep generative models are studied in this work.

Firstly, an underwater acoustic communication and networking testbed is developed for conducting various simulations and …

Synthesizing Dysarthric Speech Using Multi-Speaker Tts For Dsyarthric Speech Recognition, Mohammad Soleymanpour

Theses and Dissertations--Electrical and Computer Engineering

Dysarthria is a motor speech disorder often characterized by reduced speech intelligibility through slow, uncoordinated control of speech production muscles. Automatic Speech recognition (ASR) systems may help dysarthric talkers communicate more effectively. However, robust dysarthria-specific ASR requires a significant amount of training speech is required, which is not readily available for dysarthric talkers.

In this dissertation, we investigate dysarthric speech augmentation and synthesis methods. To better understand differences in prosodic and acoustic characteristics of dysarthric spontaneous speech at varying severity levels, a comparative study between typical and dysarthric speech was conducted. These characteristics are important components for dysarthric speech modeling, …

An Efficient Ar Model-Based Method For The Detection Of Forced Oscillations In Power Networks: Implementation And Analysis, Maria Waleska Suarez

Graduate Theses, Dissertations, and Problem Reports (ETD)

An active research topic is the detection of various oscillations that may lead to instability and potential disruption in the operation of a power network. Forced Oscillations (FOs) play a unique role in power system stability among various oscillations. They are perturbances that change the system’s state and are caused for many reasons, including but not limited to persistent load changes and oscillatory load or generation, fault, triplane, and other mechanical anomalies. These factors can hugely affect the power grid by either increasing or decreasing the amplitude, causing corrupt modes leading to blackouts, affecting the equipment involved, delivering poor power …

Intelligent Voice Guidance In Vr: Understanding The Value Of Nlp In Virtual Environments, Zhiyu Xiao

Dartmouth College Master’s Theses

Virtual assistants such as Google Assistant, Alexa and Siri emerged because of the growth of NLP(natural language processing) technology. At the same time, virtual reality has developed rapidly in recent years and has become a crucial tool in engineering product development procedures. However, people feel overwhelmed in some complicated VR environments. Thus, this thesis tries to incorporate NLP technology into the VR environment and explores the value of intelligent voice guidance in VR environments. In this thesis, a car repair training system with intelligent voice guidance is designed: users can utilize voice to perform various tasks in this system, such …

Backlog Burner: An Adventure Into Automated Scheduling, Anjolaoluwa J. Olubusi

Senior Independent Study Theses

The focus of this independent study is to explain the nurse scheduling problem (NSP) and use it as a basis to create an automated scheduling program. The nurse scheduling problem is an operational research problem that sets to find an optimal hospital schedule that fulfills the needs of the hospital and the personal requests of the nurses. The majority of solutions for the nurse scheduling problem are often designed within a hospital setting. The objective of this independent study is to use the solutions of the nurse scheduling problem to develop an automated scheduling program for the College of Wooster …

Efficacy Of Reported Issue Times As A Means For Effort Estimation, Paul Phillip Maclean

Graduate Theses, Dissertations, and Problem Reports (ETD)

Software effort is a measure of manpower dedicated to developing and maintaining and software. Effort estimation can help project managers monitor their software, teams, and timelines. Conversely, improper effort estimation can result in budget overruns, delays, lost contracts, and accumulated Technical Debt (TD). Issue Tracking Systems (ITS) have become mainstream project management tools, with over 65,000 companies using Jira alone. ITS are an untapped resource for issue resolution effort research. Related work investigates issue effort for specific issue types, usually Bugs or similar. They model their developer-documented issue resolution times using features from the issues themselves. This thesis explores a …

Generation Of High Performing Morph Datasets, Kelsey Lynn O'Haire

Graduate Theses, Dissertations, and Problem Reports (ETD)

Facial recognition systems play a vital role in our everyday lives. We rely on this technology from menial tasks to issues as vital as national security. While strides have been made over the past ten years to improve facial recognition systems, morphed face images are a viable threat to the reliability of these systems. Morphed images are generated by combining the face images of two subjects. The resulting morphed face shares the likeness of the contributing subjects, confusing both humans and face verification algorithms. This vulnerability has grave consequences for facial recognition systems used on international borders or for law …

Face Representation Learning And Its Applications: From Image Editing To 3d Avatar Animation, Xudong Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

Face representation learning is one of the most popular research topics in the computer vision community, as it is the foundation of face recognition and face image generation. Numerous representation learning frameworks have been integrated into applications in daily life, such as face recognition, image editing, and face tracking. Researchers have developed advanced algorithms for face recognition with successful commercial productions, for example, FaceID on the smartphone. The performance record on face recognition is constantly updated and becoming saturated with the help of large-scale datasets and advanced computational resources. Thanks to the robust representation in face recognition, in this dissertation, …

Incentive Analysis Of Blockchain Technology, Rahul Reddy Annareddy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Blockchain technology was invented in the Bitcoin whitepaper released in 2008. Since then, several decentralized cryptocurrencies and applications have become mainstream. There has been an immense amount of engineering effort put into developing blockchain networks. Relatively few projects backed by blockchain technology have succeeded and maintained a large community of developers, users, and customers, while many popular projects with billions of dollars in funding and market capitalizations have turned out to be complete scams.

This thesis discusses the technological innovations introduced in the Bitcoin whitepaper and the following work of the last fifteen years that has enabled blockchain technology. A …