Hardware Systems Commons^™

Improving The Programmability Of Networked Energy Systems, Noman Bashir

Doctoral Dissertations

Global warming and climate change have underscored the need for designing sustainable energy systems. Sustainable energy systems, e.g., smart grids, green data centers, differ from the traditional systems in significant ways and present unique challenges to system designers and operators. First, intermittent renewable energy resources power these systems, which break the notion of infinite, reliable, and controllable power supply. Second, these systems come in varying sizes, spanning over large geographical regions. The control of these dispersed and diverse systems raises scalability challenges. Third, the performance modeling and fault detection in sustainable energy systems is still an active research area. Finally, …

Barrier Knockdown Test Control System For The Cal Poly Kinesiology Department, Regina M. Chapuis

Computer Engineering

The goal of this project is to design and implement a new control system for the LEDs and buttons on an existing Barrier Knockdown setup in the Cal Poly Kinesiology department. The Barrier Knockdown test is a testing apparatus in which subjects knock down a series of mechanical barriers in one of three patterns. The computer system times their reaction and movement time, and the test as a whole provides students with data to study the phenomenon of Contextual Interference. This system was previously controlled by an old computer setup that ultimately crashed. This project recreates the logic and user …

Mars Prototype Rover Environmental Measurement System, James A. Renick

Computer Engineering

In my senior project, the problem I am trying to solve is how to efficiently design, create, and install an original library onto a Mars prototype rover operating system and to further use that library to integrate a new weather measurement sensor device into the rover system with the necessary software and hardware implementations. This is an important and highly valued problem as many aerospace and other engineering companies utilize rovers and other autonomous systems for important research, explorations, and reconnaissance missions and goals. In solving this problem, I utilized many resources that were available to me such as advisors, …

Therapeutic Mechanical Horse, Cade M. Liberty, Aleya Dolorfino, Peter Philips, Zuzanna Dominik, Luke Watts

Mechanical Engineering

Jack's Helping Hand and its hippotherapy participants required a device to serve as an alternative to a live horseback riding experience that could also increase the range of riders. This would provide more clients with equine-assisted therapy that has proven to better the lives of people with both physical and mental disabilities. Horses can be unpredictable, tall, and sometimes anxiety-inducing, especially for new riders. Our group’s aim was to develop a mechanical horse that will be able to reduce these issues for equine therapy centers and the riders they help. When a rider gets to practice sitting on the horse …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Accelerating Graphics Rendering On Risc-V Gpus, Joshua Simpson

Master's Theses

Graphics Processing Units (GPUs) are commonly used to accelerate massively parallel workloads across a wide range of applications from machine learning to cryptocurrency mining. The original application for GPUs, however, was to accelerate graphics rendering which remains popular today through video gaming and video rendering. While GPUs began as fixed function hardware with minimal programmability, modern GPUs have adopted a design with many programmable cores and supporting fixed function hardware for rasterization, texture sampling, and render output tasks. This balance enables GPUs to be used for general purpose computing and still remain adept at graphics rendering. Previous work at the …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …

Open Hardware In Science: The Benefits Of Open Electronics, Michael Oellermann, Jolle W. Jolles, Diego Ortiz, Rui Seabra, Tobias Wenzel, Hannah Wilson, Richelle L. Tanner

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Openly shared low-cost electronic hardware applications, known as open electronics, have sparked a new open-source movement, with much untapped potential to advance scientific research. Initially designed to appeal to electronic hobbyists, open electronics have formed a global “maker” community and are increasingly used in science and industry. In this perspective article, we review the current costs and benefits of open electronics for use in scientific research ranging from the experimental to the theoretical sciences. We discuss how user-made electronic applications can help (I) individual researchers, by increasing the customization, efficiency, and scalability of experiments, while improving data quantity and quality; …

Designing A Digital Electronics Lab, Ben Buckwalter

Honors Theses

Hardware electronics tools can be more expensive than a new learner is willing to invest resulting in a barrier to entry. Furthermore, it can be difficult for a new learner to know where to start when learning electronics. To resolve this issue, we first explore current mobile app solutions that provide free electronics tooling. Then, we propose a design for a new mobile app that contains basic function generator and oscilloscope functionality as well as the learning resources necessary in order to guide new learners in the basics of digital electronics.

Design Of Hardware To Aid Smartphone-Based Oscilloscope App, Riddock Moran

Honors Theses

A smartphone-based oscilloscope improves on traditional lab oscilloscopes in accessibility and portability but faces several performance limitations compared to traditional oscilloscopes. Among these, an oscilloscope app that uses the phone’s audio to read voltage signals will have a sampling rate and voltage bottlenecked by the capabilities of the audio codec, which will rarely exceed a rate of 48 kHz and 1 volt, respectively. Additionally, smartphones lack the ability to read line-in audio, allowing only one channel input through the microphone. Direct connections to an audio source may not be possible due to requiring an audio jack connection, and different poles …

Structural Checking Tool Restructure And Matching Improvements, Derek Taylor

Graduate Theses and Dissertations

With the rising complexity and size of hardware designs, saving development time and cost by employing third-party intellectual property (IP) into various first-party designs has become a necessity. However, using third-party IPs introduces the risk of adding malicious behavior to the design, including hardware Trojans. Different from software Trojan detection, the detection of hardware Trojans in an efficient and cost-effective manner is an ongoing area of study and has significant complexities depending on the development stage where Trojan detection is leveraged. Therefore, this thesis research proposes improvements to various components of the soft IP analysis methodology utilized by the Structural …

Side-Channel Analysis On Post-Quantum Cryptography Algorithms, Tristen Teague

Computer Science and Computer Engineering Undergraduate Honors Theses

The advancements of quantum computers brings us closer to the threat of our current asymmetric cryptography algorithms being broken by Shor's Algorithm. NIST proposed a standardization effort in creating a new class of asymmetric cryptography named Post-Quantum Cryptography (PQC). These new algorithms will be resistant against both classical computers and sufficiently powerful quantum computers. Although the new algorithms seem mathematically secure, they can possibly be broken by a class of attacks known as side-channels attacks (SCA). Side-channel attacks involve exploiting the hardware that the algorithm runs on to figure out secret values that could break the security of the system. …

Autonomous Navigator Mobile Robot Upgrade, David Sansoucy

Thinking Matters Symposium

The mobile robot platform has been developed over the course of 10 years at USM. In Spring 2020, Belle-Isle and Werner updated the previous framework by rewriting the software to use the ROS framework running on an on-board Raspberry Pi 3. They also implemented navigation using an A* motion planning algorithm and image processing. In Summer 2021, Ames incorporated Lidar and Kinect sensors onto the robot to improve its real-time navigation capabilities. He also made improvements to the power distribution systems. This project aimed to build on the ROS frameworks developed by the previous 2 teams with the main goal …

Unconventional Computation Including Quantum Computation, Bruce J. Maclennan

Faculty Publications and Other Works -- EECS

Unconventional computation (or non-standard computation) refers to the use of non-traditional technologies and computing paradigms. As we approach the limits of Moore’s Law, progress in computation will depend on going beyond binary electronics and on exploring new paradigms and technologies for information processing and control. This book surveys some topics relevant to unconventional computation, including the definition of unconventional computations, the physics of computation, quantum computation, DNA and molecular computation, and analog computation. This book is the content of a course taught at UTK.

Cognality Vr: Exploring A Mobile Vr App With Multiple Stakeholders To Reduce Meltdowns In Autistic Children, Louanne E. Boyd, Espen Garner, Ian Kim, Gianna Valencia

Engineering Faculty Articles and Research

Many autistic children can have difficulty communicating, understanding others, and interacting with new and unfamiliar environments. At times they may suffer from a meltdown. The major contributing factor to meltdowns is sensory overwhelm. Technological solutions have shown promise in improving the quality of life for autistic children-however little exists to manage meltdowns. In this work with stakeholders, we design and deploy a low cost, mobile VR application to provide relief during sensory discomfort. Through the analysis of surveys from 88 stakeholders from a variety of groups (i.e., autistic adults, children with autism, parents of autistic individuals, and medical practitioners), we …

A Low-Cost, Arduino-Based Platform For Emulating Energy Harvesting In Wireless Sensor Networks, Braden A. Miller

ONU Student Research Colloquium

This paper presents an Arduino-based platform for emulating energy harvesting in Wireless Sensor Networks (WSNs) as a form of hardware-in-the-loop simulation. The platform makes use of a battery monitoring circuit and code implemented on the Arduino as an alternative to using significantly more expensive fully equipped energy harvesting nodes. Using embedded code to emulate the energy harvesting process allows for various energy harvesting models and processes to be tested using the same platform. The main contributions of this paper are the experimental data and analyses demonstrating the energy use characterization of the Arduino-based platform in a three-node relay network using …

Real-Time Illumination Capture And Rendering On Mobile Devices, Snehal Padhye, James A. Ferwerda

Frameless

We present our efforts to develop methods for rendering 3D objects on mobile devices using real-world dynamic illumination from the user’s environment. To achieve this, we use the front and back cameras on the mobile device to estimate the light distribution in the environment in real time. We then create a dynamic illumination map and render the object at interactive rates in a browser on the device using a web-based graphics API. This project achieves one of the goals of our related work on realistic visualization of virtual objects: to make virtual objects appear to be situated within the scene …

Mixed Reality Prototype Device Showcase: Using Smart Glasses To Enhance Language Access, Aaron Parker, Connor Switenky, Roshan Mathew, Wendy Dannels

Frameless

While the use of American Sign Language (ASL) interpreters and real-time captioning significantly increases deaf individuals’ ability to participate in a wide variety of functions, there are some limitations. The major problem is that current ways of providing communication and information access to deaf people require them to split their attention between the visual focus of the specific content and the interpreter/captioning display. At any given point in time, deaf people are forced to decide what explanation to miss with subsequent effects on topic comprehension and perceptions of the interaction and environments.

Warehouse And Logistics: Smart Picking With Vuzix Smart Glasses, Elise Hemink

Frameless

Vuzix is an industry leader in augmented reality (AR) technology. We provide innovative products to an array of industries, a few being defense, security, enterprise, and consumers. Our AR technology provides a perfect balance of engagement in the digital and real worlds thanks to their innovative optics, AI apps and 5G capability.

Development Of A Ppg Sensor Array As A Wearable Device For Monitoring Cardiovascular Metrics, Jose Ignacio Rodriguez-Labra

Masters Theses

Wearable devices with integrated sensors for tracking human vitals are widely used for a variety of applications, including exercise, wellness, and health monitoring. Photoplethysmography (PPG) sensors use pulse oximetry to measure pulse rate, cardiac cycle, oxygen saturation, and blood flow by passing a light beam of variable wavelength through the skin and measuring its reflection. A multi-channel PPG wearable system was developed to include multiple nodes of pulse oximeters, each capable of using different wavelengths of light. The system uses sensor fusion along with a machine learning model to perform feature extraction of relevant cardiovascular metrics across multiple pulse oximeters …