Hardware Systems Commons^™

3d Printing Of Human Microbiome Constituents To Understand Spatial Relationships And Shape Parameters In Bacteriology, Jacques Izard, Teklu Kuru Gerbaba, Shara R. P. Yumul

Department of Food Science and Technology: Faculty Publications

Effective laboratory and classroom demonstration of microbiome size and shape, diversity, and ecological relationships is hampered by a lack of high-resolution, easy-to-use, readily accessible physical or digital models for use in teaching. Three-dimensional (3D) representations are, overall, more effective in communicating visuospatial information, allowing for a better understanding of concepts not directly observable with the unaided eye. Published morphology descriptions and microscopy images were used as the basis for designing 3D digital models, scaled at 20,000×, using computer-aided design software (CAD) and generating printed models of bacteria on mass-market 3D printers. Sixteen models are presented, including rod-shaped, spiral, flask-like, vibroid, …

Annual Report 2020-2021, Depaul University College Of Computing And Digital Media

CDM Annual Reports

LETTER FROM THE DEAN

As I write this letter during the beginning of the 2021–22 academic year, we have started to welcome the majority of our students to campus— many for the very first time, and some for the first time in a year and a half. It has been wonderful to be together, in-person, again. Four quarters of learning and working remotely was challenging, to be sure, but I have been consistently amazed by the resilience, innovation, and hard work of our students, faculty, and staff, even in the most difficult of circumstances. This annual report, covering the 2020–21 …

Enabling Machine Learning On The Edge Using Sram Conserving Efficient Neural Networks Execution Approach, Bharath Sudharsan, Pankesh Patel, John G. Breslin, Muhammad Intizar Ali

Publications

Edge analytics refers to the application of data analytics and Machine Learning (ML) algorithms on IoT devices. The concept of edge analytics is gaining popularity due to its ability to perform AI-based analytics at the device level, enabling autonomous decision-making, without depending on the cloud. However, the majority of Internet of Things (IoT) devices are embedded systems with a low-cost microcontroller unit (MCU) or a small CPU as its brain, which often are incapable of handling complex ML algorithms.

In this paper, we propose an approach for the ecient execution of already deeply compressed, large neural networks (NNs) on tiny …

Design Project: Smart Headband, John Michel, Jack Durkin, Noah Lewis

Williams Honors College, Honors Research Projects

Concussion in sports is a prevalent medical issue. It can be difficult for medical professionals to diagnose concussions. With the fast pace nature of many sports, and the damaging effects of concussions, it is important that any concussion risks are assessed immediately. There is a growing trend of wearable technology that collects data such as steps and provides the wearer with in-depth information regarding their performance. The Smart Headband project created a wearable that can record impact data and provide the wearer with a detailed analysis on their risk of sustaining a concussion. The Smart Headband uses accelerometers and gyroscopes …

Light Loaded Automated Guided Vehicle, Marcus Radtka, Nazar Paramashchuk, Lawrence Shevock

Williams Honors College, Honors Research Projects

The objective of the locomotion system was to design and implement the mechanical, electrical, and software related functions to ensure the LLAGV had the capability of maneuvering its surroundings. The LLAGV’s motors were represented in an open loop transfer function to utilize RPM feedback and a compensator when needed. The modeled compensator helped control the LLAGV’s speed and acceleration, enabling further control of the LLAGV. The internal circuitry has the means to properly distributed power to all components and allowed the user to control the LLAGV to their desire. The application software within the LLAGV locomotion system (LLAGV-LS) had consideration …

Smart Doggy Door, Jaret Helminski, Brandon Caldwell, Jason Marcum, Nathaniel Hall

Williams Honors College, Honors Research Projects

The smart doggy door is an engineering senior design project which will be completed in the spring of 2021. The goal of this project is to design and implement a dog door that can detect when a dog is near. After that it will determine if the dog is allowed to use the door and it will then open if the dog is allowed to go through the door. This device will also send a notification to the dogs owner via an app on their phone. This device will allow dog owners to keep unwanted animals out as well as …

Integration Of Robotic And Electro-Pneumatic Systems Using Advanced Control And Communication Schemes, Chinmay Kondekar

Dissertations, Master's Theses and Master's Reports

Modern industrial automation systems are designed by interconnecting various subsystems which work together to perform a process. The thesis project aims to integrate fragmented subsystems into a flexible and reconfigurable system through advanced communication protocols and perform a process to demonstrate the effectiveness of interconnected systems.

The system consists of three six-axis robots, one electro-pneumatic robot, and two conveyors connected using EthernetIP communication and hardwired connections. The interconnected system works together to perform machining of a workpiece using advanced control methods of CAD to robot path generation, central control through a PLC, and process control through HMI.

Standardized programming blocks …

Energy Harvesting And Sensor Based Hardware Security Primitives For Cyber-Physical Systems, Carson Labrado

Theses and Dissertations--Electrical and Computer Engineering

The last few decades have seen a large proliferation in the prevalence of cyber-physical systems. Although cyber-physical systems can offer numerous advantages to society, their large scale adoption does not come without risks. Internet of Things (IoT) devices can be considered a significant component within cyber-physical systems. They can provide network communication in addition to controlling the various sensors and actuators that exist within the larger cyber-physical system. The adoption of IoT features can also provide attackers with new potential avenues to access and exploit a system's vulnerabilities. Previously, existing systems could more or less be considered a closed system …

Designing Novel Hardware Security Primitives For Smart Computing Devices, Amitkumar Degada

Theses and Dissertations--Electrical and Computer Engineering

Smart computing devices are miniaturized electronics devices that can sense their surroundings, communicate, and share information autonomously with other devices to work cohesively. Smart devices have played a major role in improving quality of the life and boosting the global economy. They are ubiquitously present, smart home, smart city, smart girds, industry, healthcare, controlling the hazardous environment, and military, etc. However, we have witnessed an exponential rise in potential threat vectors and physical attacks in recent years. The conventional software-based security approaches are not suitable in the smart computing device, therefore, hardware-enabled security solutions have emerged as an attractive choice. …

A General Framework For Characterizing And Evaluating Attacker Models For Cps Security Assessment, Christopher S. Deloglos, Christopher Deloglos

Theses and Dissertations

Characterizing the attacker’s perspective is essential to assessing the security posture and resilience of cyber-physical systems. The attacker’s perspective is most often achieved by cyber-security experts (e.g., red teams) who critically challenge and analyze the system from an adversarial stance. Unfortunately, the knowledge and experience of cyber-security experts can be inconsistent leading to situations where there are gaps in the security assessment of a given system. Structured security review processes (such as TAM, Mission Aware, STPA-SEC, and STPA-SafeSec) attempt to standardize the review processes to impart consistency across an organization or application domain. However, with most security review processes, the …

Increasing The Reliability Of Software Systems On Small Satellites Using Software-Based Simulation Of The Embedded System, Matthew D. Grubb

Graduate Theses, Dissertations, and Problem Reports (ETD)

The utility of Small Satellites (SmallSats) for technology demonstrations and scientific research has been proven over the past few decades by governments, universities, and private companies. While the research and technology demonstration objectives that can be provided by these SmallSats are becoming similar to larger spacecraft, their reliability still falls behind. This is in part due to the reduced cost of SmallSat missions in comparison to large spacecraft, which requires cheaper components, rapid development schedules, and accepted risk. In these missions, the importance of the flight software is often overlooked, and the software is rushed through development and not fully …

Sistem Keamanan Ganda Sepeda Motor Dengan Fingerprint Dan Gprs Berbasis Arduino Untuk Peningkatan Keamanan, Bartholomeus Danar, Masduki Zakarijah

Elinvo (Electronics, Informatics, and Vocational Education)

Tujuan pembuatan Tugas Akhir ini adalah: (1) merancang fingerprint dan gprs pada sistem pengaman sepeda motor, (2) mengimplementasi fingerprint dan gprs pada sistem pengaman sepeda motor, (3) mengetahui unjuk kerja fingerprint dan gprs pada sistem pengaman sepeda motor. Komponen utama yang digunakan adalah Arduino Mega sebagai pusat olah data , fingerprint sebagai keamanan utama, gprs sebagai kemanan kedua. dan kode numerik sebagai penulisan password serta mensetting sistem. Langkah Pembuatan Sitem Keamanan Ganda Sepeda Motor Berbasis Arduino Untuk Peningkatan Keamanan ini adalah (1) Perancangan Perangkat Keras: pertama Pembuatan Skematik Sistem , kedua Pembuatan Layout PCB, ketiga Pembuatan Desain 3D, terakhir …

Penerapan Iot Untuk Sistem Pemantauan Lampu Penerangan Jalan Umum, Adam Adam, Muharnis Muharnis, Ariadi Ariadi, Jefri Lianda

Elinvo (Electronics, Informatics, and Vocational Education)

Penerangan jalan umum (PJU) digunakan untuk menerangi jalan, sehingga pengguna jalan mendukung kenyamanan dan keselamatan dimalam hari. Terdapat keterbatasan sistem pemeriksaan dan pelaporan kerusakaan lampu PJU. Artikel ini membahas penerapan teknologi Internet of Things (IoT) untuk memantau gangguan kerusakan pada lampu PJU. Metode yang digunakan dalam pengembangan sistem pemantauan tersebut yaitu, kajian literatur, analisis kebutuhan, perancangan, pembuatan dan pengujian. Sistem ini dilengkapi dengan sensor ZMPT101B, ACS 712, dan Modul WiFi ESP 8266-01. Sensor ZMPT101B digunakan untuk mengukur nilai tegangan PLN, sedangkan sensor ACS 712 merupakan sensor yang digunakan untuk mengukur arus pada lampu jalan. ESP8266-01 merupakan modul wifi yang dapat …

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

Improve The Prototype Of Low-Cost Near-Infrared Diffuse Optical Imaging System, Chen Xu, Mohammed Z. Shakil

Publications and Research

Diffuse Optical Tomography (DOT) and Optical Spectroscopy using near-infrared (NIR) diffused light has demonstrated great potential for the initial diagnosis of tumors and in the assessment of tumor vasculature response to neoadjuvant chemotherapy. The aims of this project are 1) to test the different types of LEDs in the near-infrared range, and design the driving circuit, and test the modulation of LEDs at different frequencies; 2) to test the APDs as a detector, and build the receiver system and compare efficiency with pre-built systems. In this project, we are focusing on creating a low-cost infrared transmission system for tumor and …

Analysing User Experience Of Mobile Banking Applications In Nigeria: A Text Mining Approach, Omotosho Babatunde S.

CBN Journal of Applied Statistics (JAS)

This paper analyses textual data mined from 37,460 reviews written by mobile banking application users in Nigeria over the period November 2012 – July 2020. On a scale of 1 to 5 (5 being the best), the average user rating for the twenty-two apps included in our sample is 3.5; with the apps deployed by non-interest banks having the highest average rating of 4.0 and those by commercial banks with national authorisation having the least rating of 3.4. Results from the sentiment analysis reveal that the share of positive sentiment words (17.8%) in the corpus more than double that of …

Epics Urban Farming: Bringing Sustainable Fresh Food To Gary, Indiana, Elijah Klein

Purdue Journal of Service-Learning and International Engagement

EPICS Urban Farming is a team of seventeen undergraduate students designing and implementing an aquaponics and food distribution system in Gary, Indiana. With the area being a food desert, most people turn to corner stores for food that is easily accessible and cheap but unhealthy. From this diet, there are quite a few widespread health concerns that the population of Gary, Indiana, faces daily. For example, obesity, diabetes, and heart conditions are some of the most common diseases that plague the community. Urban Farming is working to aid in combating these issues with the partnership of Pastor Marty Henderson, who …

A Study Of Static And Dynamic Characteristics Of Multifunctional Signal Converters, Akmal Abdumalikov

Chemical Technology, Control and Management

The issues of continuity, accuracy, speed and reliability of signal conversion, which are the main problems of quality control and management of production processes, remain relevant. Research shows that in practice there are different signal variables, the study of which is highly formalized in a number of modeling tasks and basic classification studies, in particular transients in converters, its sources and elements requires a unified mathematical approach, that is, visual, highly formalized modeling and research based on it. The paper presents a graph model of multifunctional signal converters that provide microprocessor and electronic devices with signals in the form of …

A 2.56 Gbps Serial Wireline Transceiver That Supports An Auxiliary Channel And A Hybrid Line Driver To Compensate Large Channel Loss, Xiaoran Wang

Electrical Engineering Theses and Dissertations

Serial transceiver links are widely used for high-speed point-to-point communications. This dissertation describes two transceiver link designs for two different applications.

In serial wireline communications, security is an increasingly important factor to concern. Securing an information processing system at the application and system software layers is regarded as a necessary but incomplete defense against the cyber security threats. In this dissertation, an asynchronous serial transceiver that is capable of transmitting and receiving an auxiliary data stream concurrently with the primary data stream is described. The transceiver instantiates the auxiliary data stream by modulating the phase of the primary data without …

Investigating Single Precision Floating General Matrix Multiply In Heterogeneous Hardware, Steven Harris

McKelvey School of Engineering Graduate Student Theses & Dissertations

The fundamental operation of matrix multiplication is ubiquitous across a myriad of disciplines. Yet, the identification of new optimizations for matrix multiplication remains relevant for emerging hardware architectures and heterogeneous systems. Frameworks such as OpenCL enable computation orchestration on existing systems, and its availability using the Intel High Level Synthesis compiler allows users to architect new designs for reconfigurable hardware using C/C++. Using the HARPv2 as a vehicle for exploration, we investigate the utility of several of the most notable matrix multiplication optimizations to better understand the performance portability of OpenCL and the implications for such optimizations on this and …