Open Access. Powered by Scholars. Published by Universities.®
Articles 31 - 60 of 66
Full-Text Articles in Public Policy
Ddasaccident780, Hd-Aid
Ddasaccident780, Hd-Aid
Global CWD Repository
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward direction. He used scraper as a standard tool for excavation, but the area was hard and bushy. The de-miner hit the mine directly on its top during excavation and caused the explosion. However the deminer had worn his PPE but has got some injuries on his finger and arm of his right hand.
Ddasaccident665, Hd-Aid
Ddasaccident665, Hd-Aid
Global CWD Repository
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected signal, his excavation tool touched a mine and caused it to explode. According to the investigation report the signal was not pinpointed correctly and the deminer has used his bayonet directly on the top of anti-personnel mine, so the accident happened. Unfortunately the victim deminer was not fully dressed with PPE, so he got severe injuries on his eyes, whole face and finger of his left hand.
Ddasaccident616, Hd-Aid
Ddasaccident616, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control inadequacy because the investigators found that there was poor supervision at the time of the accident. The secondary cause is listed as Other because there is not enough detail in the summary to determine what the deminer was doing, and what tool he was using.
Ddasaccident615, Hd-Aid
Ddasaccident615, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved deminer, poor supervision and denying of mechanical asset by government authority are the main factors for the accident happened. The rule of supervision is vital in such a difficult task and can prevent the accidents.
Ddasaccident611, Hd-Aid
Ddasaccident611, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the involved deminer did not properly find the centre of the signal because of extra soil accumulated there, and thus started excavation directly from the top of the signal by force, which caused the accident happened.
Ddasaccident768, Hd-Aid
Ddasaccident768, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the mine was not missed from the clearance team but had been brought by someone and put there. One of the local residents named [Name removed] narrated that, he had placed a mine under a small stone, but has not been found there. The crater made by exploded mine was less than 5cm which shows that as it was put on the ground [surface].
Ddasaccident685, Hd-Aid
Ddasaccident685, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working with his visor raised and using a pick and his error was not corrected. The secondary cause is listed as a Management Control Inadequacy because the demining group’s management is responsible for ensuring that field supervisors prevent deminers from breaching approved SOPs.
Ddasaccident679, Hd-Aid
Ddasaccident679, Hd-Aid
Global CWD Repository
Deminers were using large loop detector during turning to the second lane/loop he may stepped on a stone which fall down on the UXO or might stepped directly on the UXO.
Ddasaccident680, Hd-Aid
Ddasaccident680, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Other because there is not enough information to draw any conclusion about the cause of the accident. The secondary cause is listed as a Management Control Inadequacy because the spreadsheet summary includes no details or injury or conclusions and is virtually useless, which is a UN MACCA responsibility.
Ddasaccident639, Hd-Aid
Ddasaccident639, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working with his visor raised and using a pick and his error was not corrected. The secondary cause is listed as a Management Control Inadequacy because the demining group’s management is responsible for ensuring that field supervisors prevent deminers from breaching approved SOPs.
Ddasaccident630, Hd-Aid
Ddasaccident630, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators found that there was inadequate field supervision at the time of the accident. The secondary case is listed as a Management Control Inadequacy because it is the senior management’s responsibility to ensure that there is adequate field supervision on site at all times.
Ddasaccident631, Hd-Aid
Ddasaccident631, Hd-Aid
Global CWD Repository
On 1st July 2009 MU-16 of [Demining group] started clearance operation on mentioned task, On 08 July 2009 at 0919hrs while [the Victim] was investigating a signal in his clearance lane, he found two bullets. He re-checked the spot and found the same signal, this process repeated for three times. Finally he found a root stump in the excavation trench with a thickness of around 2.5 cm and started to remove it, because it was blocking further excavation there. However the deminer had proper tool in his toolkit to cut such obstacles, but he tried to out it with his …
Ddasaccident626, Hd-Aid
Ddasaccident626, Hd-Aid
Global CWD Repository
The source of detonation was 23mm ammunition packed in a water thermos. The main cause of the accident appears to be poor packing of ammunition and the likelihood that some of the rounds transported had exposed retaining balls.
Ddasaccident588, Hd-Aid
Ddasaccident588, Hd-Aid
Global CWD Repository
[The Victim] was carrying out an unauthorised experiment with UXO near the [Demining group] Central Demolition Site at Loa, South Sudan. Contrary to SOPs he was attempting to burn out some High Explosive filling which was remaining in an item of UXO using propellant from a 23mm cartridge case. He was using matches directly onto the propellant to initiate the burn. Although the explosive filling was in an “open” casing of the UXO, it burned to detonation which fragmented the casing and resulted in a piece of metal going into the right leg, calf muscle area of [the Victim].
Ddasaccident603, Hd-Aid
Ddasaccident603, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working with his visor raised (or not worn) and using a pick to investigate a metal-detector reading incautiously. The secondary cause is listed as Inadequate equipment because no alternative to a pick for starting a safe excavation in hard ground was made available.
Ddasaccident648, Hd-Aid
Ddasaccident648, Hd-Aid
Global CWD Repository
A detonator blast caused the accident. The deminer has detected an active detonator in his clearance lane and has pressed it by his left hand fingers which subsequently the detonator exploded and the deminer fingers were seriously injured.
Ddasaccident627, Hd-Aid
Ddasaccident627, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Victim inattention because the investigators found that the Victim was careless. The secondary cause is listed as Unavoidable, because it is possible that the Victim inadvertently dropped a marking stone (rather than threw it deliberately at a mine) and minor accidents like that are unavoidable.
Ddasaccident609, Hd-Aid
Ddasaccident609, Hd-Aid
Global CWD Repository
The accident has occurred because of error made by the involved deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). Chisel is used for excavating of safe margin of the reading points, meaning 15 cm behind the start point of signal.
Ddasaccident800, Hd-Aid
Ddasaccident800, Hd-Aid
Global CWD Repository
During the post-demolition QA of a PMD-6 mine, [the Victim] handled a MUV fuse, complete with MD-2 detonator, which functioned resulting in the auto-amputation of his right hand. The fuse appears to have been left over from an incomplete demolition, which rendered it a misfire without any transit or striker retaining pin in place.
Ddasaccident672, Hd-Aid
Ddasaccident672, Hd-Aid
Global CWD Repository
The accident has occurred because of error made by the involved deminer as he wanted to remove a piece of wire and a steel bar without taking the precautionary measures into consideration. He should not have removed them by hand but either pulling practice or using machine should have been practiced.
Ddasaccident667, Hd-Aid
Ddasaccident667, Hd-Aid
Global CWD Repository
The accident has occurred because of deminer’s carelessness as he entered into unsafe area for urination and touched the unknown item.
Ddasaccident600, Hd-Aid
Ddasaccident600, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was working in a way that was unsafe and his error was not corrected. The secondary cause is listed as “Unavoidable” because there is not enough detail available to determine what really happened and it may be that the deminer was working as instructed when the accident occurred. If this is the case, the Field Managers bear considerable responsibility for not having learned from a similar accident involving this demining group only a few weeks previously. The repetition of the deminer working well outside …
Ddasaccident695, Hd-Aid
Ddasaccident695, Hd-Aid
Global CWD Repository
The primary and secondary cause of this accident are listed as a Unavoidable because the deminer suffered no apparent injuries, and accidental initiations can occur when excavating mines even when all precautions are taken. Dust in the eyes is common after a blast because dust is drawn into the low-pressure area behind the expanding blast wave. “Grid” in the eyes causes greater concern because it may have been ejecta from the blast, implying that the visor was not worn correctly but it is presumed that the Victim had no injuries because the investigators accepted that this was so.
Ddasaccident663, Hd-Aid
Ddasaccident663, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators found that the Victim was working with a shovel in breach of SOPs and his error was not corrected. The secondary cause is listed as a Management Control Inadequacy because it is the management’s responsibility to ensure that the field supervisors control the deminers appropriately.
Ddasaccident662, Hd-Aid
Ddasaccident662, Hd-Aid
Global CWD Repository
While I was checking on deminers I saw the deminer [Name removed] working on his group on 12 o’clock mine I asked him what’s the problem? He said he was looking for a missing mine and he can’t find it, I went to help him and when I dig twice using the heavy rake a mine was blasted in my face, I sat on the ground and the deminer, team leader and the team section came and took me to the medic team on the ambulance stretcher out of the field.
Ddasaccident584, Hd-Aid
Ddasaccident584, Hd-Aid
Global CWD Repository
The deminer was working within the Site Preparation Stage to identify the centre of the mine line and an IOE was already identified and recovered the expected mines about 15m to our side from the mine centre line which already quality up to the assigned depth (15cm) and all the mines recovered from the site were a surface mines and when the deminer trying to bring out some stones he stepped on un expected mine in the site with the heel.
Ddasaccident621, Hd-Aid
Ddasaccident621, Hd-Aid
Global CWD Repository
It is the BOI and AMAC investigation team conclusion that the victim section leader, had found an unknown object during rest time and was tampering with it that suddenly the unknown object which probably was a UXO fuse exploded and caused left hand amputation, cut of right hand some fingers, left eye injury and left leg injuries to him.
Ddasaccident614, Hd-Aid
Ddasaccident614, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the involved deminer did not properly mark the signal with the reading marker. Also he was carelessly excavating the reading point, and this caused the mine to be exploded.
Ddasaccident598, Hd-Aid
Ddasaccident598, Hd-Aid
Global CWD Repository
It is the conclusion of investigation team that the involved deminer was excavation a signal in an area where the ground surface was hard with dense vegetation, and considering the crater created as a result of the explosion it seems that the deminer was excavating the signal about 30 cm on right side of the working lane where he was not in a stable position for excavating the signal by scraper; the excavation of this lane required to be done in next clearance lane.
Ddasaccident698, Hd-Aid
Ddasaccident698, Hd-Aid
Global CWD Repository
While he was marking his designated clearance lane in term of work progress, a painted stone fall down from his hand and caused for blowing off the mine.